Topic: risers and gpu temp/clock settings [solved] (Read 468 times)
Sounds good, can you mark thread as "solved" for other people?
it was actually aticonfig settings.
although i'm still not sure why pci bus address (from lspci) difffers from those written to xorg.conf, a fresh aticonfig --adapter=all -f --initial resolved the issue completely.
thanks for checking in.
although i'm still not sure why pci bus address (from lspci) difffers from those written to xorg.conf, a fresh aticonfig --adapter=all -f --initial resolved the issue completely.
thanks for checking in.
could you please tell us which mother board?
just ran into a motherboard that is not allowing any card not directly plugged into the pcie slot to show temp or adjust clocks.
ERROR - Get temperature failed for Adapter 1 - AMD Radeon HD 7900 Series
ERROR - Get clocks failed for Adapter 1 - AMD Radeon HD 7900 Series
is the error code, i know this has come up before but i could not find the posts.
is there a bios setting or remedy i could employ to bypass this issue?
ERROR - Get temperature failed for Adapter 1 - AMD Radeon HD 7900 Series
ERROR - Get clocks failed for Adapter 1 - AMD Radeon HD 7900 Series
is the error code, i know this has come up before but i could not find the posts.
is there a bios setting or remedy i could employ to bypass this issue?
Jump to: