Topic: RTX 3090 Zotac Trinity: Error 43 (Read 163 times)
Imagine all the people that buy these second hand when the real dip this summer comes.
disable secure boot in bios, disable csm. If your using a usb boot drive swap to a hdd or ssd. The LA struggles to initiate the dag file on startup if on usb.
Find hiveOS and test the GPU if it's not detected then your GPU is dead and gone, this is my number one fear about 3090 they get too hot on the memory side you need to watch them constantly or choose easier algorithm to mine with them
I am sure memory die.
I have all my 3090 working at 100 mhs because of this (70C memory).
I have all my 3090 working at 100 mhs because of this (70C memory).
Do you have artifacts in BIOS or when installing drivers?
If not, find any small hard drive to install your new operating system and see the results. Or check in Hive OS.
To remove drivers, you can try DDU - Display Driver Uninstaller.
Does your graphics card have a warranty?
If not, find any small hard drive to install your new operating system and see the results. Or check in Hive OS.
To remove drivers, you can try DDU - Display Driver Uninstaller.
Does your graphics card have a warranty?
The fastest option is to use simplemining or hiveos.
When its not showing up there its dead. If it shows up
you can try the advise above.
When its not showing up there its dead. If it shows up
you can try the advise above.
The error code " Error 43 " is coming when you GPU stopped working !
You have to fully reinstall your device (GPU) with a clean install maybe .
I found a guide that is updated from this month and hope it helps you get it working again .
Source : https://www.wepc.com/how-to/how-to-fix-code-43-error/
Good Luck and hope it helps to solve your problem and get your 3090 running again.
If this dosnt help you should try the GPU in a other PC , if there is the same problem and it dosnt work there the its something with GPU wrong.
You have to fully reinstall your device (GPU) with a clean install maybe .
I found a guide that is updated from this month and hope it helps you get it working again .
Source : https://www.wepc.com/how-to/how-to-fix-code-43-error/
Good Luck and hope it helps to solve your problem and get your 3090 running again.
If this dosnt help you should try the GPU in a other PC , if there is the same problem and it dosnt work there the its something with GPU wrong.
Hello Guys, as you yan read in the title, i have a Problem with my RTX 3090, as out of no where it seems to have stopped functioning.
I can still see the Card in the Device Manager, but it tells me that it is not running properly, and shows 'Error 43', i have already tried everything tht i could find on the internet, like deleting all Drivers and reinstalling them etc, but nothing is working unfortunately.
Can somebody help me with this ?
Thank you for every help.
I can still see the Card in the Device Manager, but it tells me that it is not running properly, and shows 'Error 43', i have already tried everything tht i could find on the internet, like deleting all Drivers and reinstalling them etc, but nothing is working unfortunately.
Can somebody help me with this ?
Thank you for every help.
Jump to: