Author

Topic: ruining 2 gpu's without powered risers??? (Read 506 times)

hero member
Activity: 777
Merit: 500
January 08, 2014, 11:40:45 AM
#8
Power supply should be fine.  Most mining software will let you monitor the gpu temps if they consistently push over 90*C they are getting too hot. Type of fan really doesn't matter as long as it is moving the hot air away from the cards.
If I over clock a little will it damage the psu?

How can I monitor how much the components are asking from the psu.  I have a watt meter but that will only tell me how much the psu is using.
hero member
Activity: 546
Merit: 500
January 08, 2014, 11:33:08 AM
#7
Power supply should be fine.  Most mining software will let you monitor the gpu temps if they consistently push over 90*C they are getting too hot. Type of fan really doesn't matter as long as it is moving the hot air away from the cards.
hero member
Activity: 777
Merit: 500
January 07, 2014, 06:46:51 PM
#6
Yes as long as the power supply is adequate.
if your using x16 to x16 risers then your pretty safe with unpowerd ones

I mean, can i connect to mobo without any risers???

Make sure you have have cooling.

I have a 750w corasir rm.  I can use a normal desktop fan can't I?
sr. member
Activity: 280
Merit: 250
January 07, 2014, 05:50:04 PM
#5
if your using x16 to x16 risers then your pretty safe with unpowerd ones

I mean, can i connect to mobo without any risers???

Make sure you have have cooling.
hero member
Activity: 546
Merit: 500
January 07, 2014, 05:48:38 PM
#4
Yes as long as the power supply is adequate.
hero member
Activity: 777
Merit: 500
January 07, 2014, 05:41:43 PM
#3
if your using x16 to x16 risers then your pretty safe with unpowerd ones

I mean, can i connect to mobo without any risers???
legendary
Activity: 1540
Merit: 1002
January 06, 2014, 09:53:49 PM
#2
if your using x16 to x16 risers then your pretty safe with unpowerd ones
hero member
Activity: 777
Merit: 500
January 06, 2014, 06:42:39 PM
#1
Hi, I was wondering if I could run my 7950 and the 280x straight off my extreme4 970 mobo without frying it.  Is this possible?
Jump to: