Try mining at stock for a few hours and increase in 10MHZ increments.
When you hang, back off by 5 until its 100%. A crashed miner doesnt help anyone.
Topic: Running 5970 and cgminer for the first time (Read 2248 times)
I lowered the gpu clocks to 800 and changed the intensity from d to 8. 
Code:
cgminer -o http://127.0.0.1:9332 -u tunnelrat -p spelunking -k phatk -v 2 -w 128 -I 8 -g 1 --gpu-fan 45 --gpu-engine 800 --gpu-memclock 300
Code:
cgminer version 2.3.2 - Started: [2012-04-12 22:59:09]
--------------------------------------------------------------------------------
(5s):717.2 (avg):713.7 Mh/s | Q:355 A:209 R:18 HW:0 E:59% U:8.68/m
TQ: 3 ST: 3 SS: 0 DW: 331 NB: 4 LW: 454 GF: 0 RF: 0
Connected to http://127.0.0.1:9332 with LP as user tunnelrat
Block: .................................... Started: [23:17:44]
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 65.0C 2901RPM | 358.7/357.6Mh/s | A:106 R: 7 HW:0 U: 4.40/m I: 8
GPU 1: 69.0C 2901RPM | 357.4/356.1Mh/s | A:103 R:11 HW:0 U: 4.28/m I: 8
--------------------------------------------------------------------------------
GPU 0: 358.7 / 357.6 Mh/s | A:106 R:7 HW:0 U:4.42/m I:8
65.5 C F: 45% (2901 RPM) E: 800 MHz M: 300 Mhz V: 1.050V A: 98% P: 0%
Last initialised: [2012-04-12 22:59:10]
Intensity: 8
Thread 0: 359.1 Mh/s Enabled ALIVE
GPU 1: 357.4 / 356.1 Mh/s | A:103 R:11 HW:0 U:4.29/m I:8
69.0 C F: 45% (2901 RPM) E: 800 MHz M: 300 Mhz V: 1.050V A: 97% P: 0%
Last initialised: [2012-04-12 22:59:11]
Intensity: 8
Thread 1: 356.6 Mh/s Enabled ALIVE
--------------------------------------------------------------------------------
(5s):717.2 (avg):713.7 Mh/s | Q:355 A:209 R:18 HW:0 E:59% U:8.68/m
TQ: 3 ST: 3 SS: 0 DW: 331 NB: 4 LW: 454 GF: 0 RF: 0
Connected to http://127.0.0.1:9332 with LP as user tunnelrat
Block: .................................... Started: [23:17:44]
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 65.0C 2901RPM | 358.7/357.6Mh/s | A:106 R: 7 HW:0 U: 4.40/m I: 8
GPU 1: 69.0C 2901RPM | 357.4/356.1Mh/s | A:103 R:11 HW:0 U: 4.28/m I: 8
--------------------------------------------------------------------------------
GPU 0: 358.7 / 357.6 Mh/s | A:106 R:7 HW:0 U:4.42/m I:8
65.5 C F: 45% (2901 RPM) E: 800 MHz M: 300 Mhz V: 1.050V A: 98% P: 0%
Last initialised: [2012-04-12 22:59:10]
Intensity: 8
Thread 0: 359.1 Mh/s Enabled ALIVE
GPU 1: 357.4 / 356.1 Mh/s | A:103 R:11 HW:0 U:4.29/m I:8
69.0 C F: 45% (2901 RPM) E: 800 MHz M: 300 Mhz V: 1.050V A: 97% P: 0%
Last initialised: [2012-04-12 22:59:11]
Intensity: 8
Thread 1: 356.6 Mh/s Enabled ALIVE
The terminal that it's running in has become unresponsive and there was this alert just before the terminal problem:
Pool 0 not providing work fast enough
Checking the pool hashing is at 0MH/s crap.
You will see that pool 0 or 1 depends on how many you have setup all the time it is really not much to worry about unless it actually stops hashing then you need to look into it, try lowering the clock to 800 from the 825 you have there now as the unresponsive terminal suggests a hanging of the video card you may even need to reboot to get started again.
Code:
cgminer version 2.3.2 - Started: [2012-04-12 21:50:32]
--------------------------------------------------------------------------------
(5s):420.4 (avg):480.7 Mh/s | Q:312 A:87 R:4 HW:0 E:28% U:6.69/m
TQ: 6 ST: 7 SS: 0 DW: 284 NB: 2 LW: 255 GF: 0 RF: 0
Connected to http://127.0.0.1:9332 with LP as user tunnelrat
Block: ..................................c... Started: [22:01:36]
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 69.0C 1941RPM | 217.1/242.8Mh/s | A:52 R:1 HW:0 U:4.00/m I: 2
GPU 1: 72.5C 1941RPM | 224.6/238.9Mh/s | A:36 R:3 HW:0 U:2.77/m I: 2
--------------------------------------------------------------------------------
GPU 0: 276.2 / 242.7 Mh/s | A:48 R:1 HW:0 U:3.97/m I:4
71.0 C F: 31% (1865 RPM) E: 825 MHz M: 300 Mhz V: 1.050V A: 69% P: 0%
Last initialised: [2012-04-12 21:50:38]
Intensity: Dynamic (only one thread in use)
Thread 0: 257.9 Mh/s Enabled ALIVE
Thread 1: 0.0 Mh/s Enabled ALIVE paused
GPU 1: 270.5 / 239.1 Mh/s | A:36 R:3 HW:0 U:2.98/m I:4
74.5 C F: 31% (1865 RPM) E: 825 MHz M: 300 Mhz V: 1.050V A: 70% P: 0%
Last initialised: [2012-04-12 21:50:39]
Intensity: Dynamic (only one thread in use)
Thread 2: 256.5 Mh/s Enabled ALIVE
Thread 3: 0.0 Mh/s Enabled ALIVE paused
--------------------------------------------------------------------------------
(5s):420.4 (avg):480.7 Mh/s | Q:312 A:87 R:4 HW:0 E:28% U:6.69/m
TQ: 6 ST: 7 SS: 0 DW: 284 NB: 2 LW: 255 GF: 0 RF: 0
Connected to http://127.0.0.1:9332 with LP as user tunnelrat
Block: ..................................c... Started: [22:01:36]
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 69.0C 1941RPM | 217.1/242.8Mh/s | A:52 R:1 HW:0 U:4.00/m I: 2
GPU 1: 72.5C 1941RPM | 224.6/238.9Mh/s | A:36 R:3 HW:0 U:2.77/m I: 2
--------------------------------------------------------------------------------
GPU 0: 276.2 / 242.7 Mh/s | A:48 R:1 HW:0 U:3.97/m I:4
71.0 C F: 31% (1865 RPM) E: 825 MHz M: 300 Mhz V: 1.050V A: 69% P: 0%
Last initialised: [2012-04-12 21:50:38]
Intensity: Dynamic (only one thread in use)
Thread 0: 257.9 Mh/s Enabled ALIVE
Thread 1: 0.0 Mh/s Enabled ALIVE paused
GPU 1: 270.5 / 239.1 Mh/s | A:36 R:3 HW:0 U:2.98/m I:4
74.5 C F: 31% (1865 RPM) E: 825 MHz M: 300 Mhz V: 1.050V A: 70% P: 0%
Last initialised: [2012-04-12 21:50:39]
Intensity: Dynamic (only one thread in use)
Thread 2: 256.5 Mh/s Enabled ALIVE
Thread 3: 0.0 Mh/s Enabled ALIVE paused
The terminal that it's running in has become unresponsive and there was this alert just before the terminal problem:
Pool 0 not providing work fast enough
Checking the pool hashing is at 0MH/s crap.
70-75 depending on how hot you'll like it to run. Personally, I run mine at 76*C. Intensity -d if you don't want to see any lag, 6-10 depending on how much lag you can tolerate. I run mine at 10 and my browsing is unhindered.
I just use the default. It does a pretty good job of balancing intensity with the temp. I'm using an ati 6750.
Try a few intensity settings and go with what works best for you. Try 725-825 for a gpu range to start with. Go with 75C for a target temp. Use auto-fan & auto-gpu. Adjust all settings to suit your needs.
OK, all is installed and now I want to run cgminer but there are lots of tweaking that can be done.
What settings should I begin with to run it for a couple of days to see how well it is working?
I'm using this machine to surf as well, what intensity would be good?
What is the safe high end target for overclocking while using this pc?
Is 70C a good target maximum? Is it better to use gpu-fan at a set speed versus using auto-fan?
No load yet:
What settings should I begin with to run it for a couple of days to see how well it is working?
I'm using this machine to surf as well, what intensity would be good?
What is the safe high end target for overclocking while using this pc?
Is 70C a good target maximum? Is it better to use gpu-fan at a set speed versus using auto-fan?
No load yet:
Code:
Adapter 0 - ATI Radeon HD 5900 Series
Sensor 0: Temperature - 38.50 C
Adapter 1 - ATI Radeon HD 5900 Series
Sensor 0: Temperature - 43.00 C
Sensor 0: Temperature - 38.50 C
Adapter 1 - ATI Radeon HD 5900 Series
Sensor 0: Temperature - 43.00 C
Jump to: