ip for the cube is 192.168.1.254:8000
you need a stratum proxy running to use your cube.
See this excellent thread for more info:
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-cube-setup-hd-352658
I run the stratum on RPi - haven't tried running a miner at the same time. Bfgminer apparently has a proxy you can use with the cube but I read somewhere that it was only the windows version. With a little research you can find out if that is still true.
Topic: Running a raspberry pi and a cube block erupter (Read 3125 times)
I have a rasperry pi running minepeon with my jalapeno can i also plug my cube into this ( 30 ghs )
If anyone can help me id me most gratefull
you would have to explain like you were telling a child
If anyone can help me id me most gratefull
you would have to explain like you were telling a child
I thought cube is standalone (besides power supply).
Preconfigured IP address for cube is 192.168.1.200 (I believe).
If your router is other than 192.168.1.x, either reconfigure your router to 192.168.1.x address.
After your router is set to 192.168.1.1, use your web browser from your computer and open up 192.168.1.200 for web interface.
After login, you can change pool config, password, etc.
I have a rasperry pi running minepeon with my jalapeno can i also plug my cube into this ( 30 ghs )
If anyone can help me id me most gratefull
you would have to explain like you were telling a child
If anyone can help me id me most gratefull
you would have to explain like you were telling a child
Jump to: