Running nodes on linux | Bitcointalksearch.org

ABCbits

legendary

Activity: 2870

Merit: 7490

Crypto Swap Exchange

Quote from: hobo698 on January 01, 2020, 07:39:33 PM

Quote from: ?? on ??

Ubuntu is the answer, not only you don't need to bother with configuration (install dependency, search/configure driver, etc.), most of your questions either already answered or someone will answer them.

What if I want to run a Bitman USB Antminer just to get started? I have a Win 10 64bit system. I have been doing some reading here on the forum but I am really confused about some things here. I was able to get

Quote

MinGW

from the link of

https://sourceforge.net/projects/mingw/

but cannot find a few of the files needed to get this to set upright. Some of the links for the files in the "install for windows" are not longer active. I want to set up bfgminer just to get my feet wet. Can anyone get me started. If not I can load Ubuntu again.
Best Regards.

If you need to compile an application using MinGW, how about use boot to Ubuntu LiveCD, install MinGW (and other dependecy) and compile it from Ubuntu LiveCD ?

If the problem is specific to Bitman USB Antminer, i recommend you to ask the question on Mining support

hobo698

newbie

Activity: 3

Merit: 0

Quote from: ABCbits on January 02, 2020, 02:57:25 PM

Quote from: hobo698 on January 01, 2020, 07:39:33 PM

Quote from: ?? on ??

Ubuntu is the answer, not only you don't need to bother with configuration (install dependency, search/configure driver, etc.), most of your questions either already answered or someone will answer them.

What if I want to run a Bitman USB Antminer just to get started? I have a Win 10 64bit system. I have been doing some reading here on the forum but I am really confused about some things here. I was able to get

Quote

MinGW

from the link of

https://sourceforge.net/projects/mingw/

but cannot find a few of the files needed to get this to set upright. Some of the links for the files in the "install for windows" are not longer active. I want to set up bfgminer just to get my feet wet. Can anyone get me started. If not I can load Ubuntu again.
Best Regards.

If you need to compile an application using MinGW, how about use boot to Ubuntu LiveCD, install MinGW (and other dependecy) and compile it from Ubuntu LiveCD ?

If the problem is specific to Bitman USB Antminer, i recommend you to ask the question on Mining support

I thank you for the response friend. I was able to get cgminer installed in Win 10 tonight. It was my blunderous u know what causing the issue. I am going to hook up the miner in the morning and get it running via the terminal. Once I see what I am doing I am moving back over to my home Linux OS. Again I have a way to go, and I will do this in time.
Best to you!
Hobo

hobo698

newbie

Activity: 3

Merit: 0

Quote from: ?? on ??

Ubuntu is the answer, not only you don't need to bother with configuration (install dependency, search/configure driver, etc.), most of your questions either already answered or someone will answer them.

What if I want to run a Bitman USB Antminer just to get started? I have a Win 10 64bit system. I have been doing some reading here on the forum but I am really confused about some things here. I was able to get

Quote

MinGW

from the link of

https://sourceforge.net/projects/mingw/

but cannot find a few of the files needed to get this to set upright. Some of the links for the files in the "install for windows" are not longer active. I want to set up bfgminer just to get my feet wet. Can anyone get me started. If not I can load Ubuntu again.
Best Regards.

Artemis3

legendary

Activity: 1988

Merit: 1561

CLEAN non GPL infringing code made in Rust lang

Quote from: cryptoperkele on December 30, 2019, 12:21:00 PM

Hi, i am a Linux noob and would like to know which Linux version should i start with my laptop if i want to run a Bitcoin node and various altcoin nodes?
Pros and cons pretty please.

There are none. Any version works. You should get an updated bitcoind and that probably has some dependencies that most distros should satisfy, unless you compile it.

I have nothing to say about altcoins but their requirements should be similar. It all amounts to what do you want to do with that laptop, because for the most bare needs you don't even need a gui (or a laptop, a raspberry pi or similar is good enough).

But anyway if you want recommendations, I'll say MX Linux. Its currently no.1 on Distrowatch.

Remember unless you plan to run your nodes pruned, they need space, LOTS of space, as in 300g or so for Bitcoin's blockchain alone and have the patience to wait for that to download. Pruned nodes will download the same, but won't keep the older transactions stored afterwards.

kusanagi01

member

Activity: 180

Merit: 14

if you have good laptop than use ubuntu, if you how low one just use lubuntu or kubuntu , some of linux that can run in low laptops
and you just go to youtube and search how install and how use commands

hobo698

newbie

Activity: 3

Merit: 0

I see this post will help me. One question, Would PCLinux OS work with this. I have triple boot here with Win10, Ubuntu and Pclinux which is my preference. I have not run Debian for a while but am very experienced in that OS also.

Bitcoin_Arena

copper member

Activity: 2030

Merit: 1788

฿itcoin for all, All for ฿itcoin.

From Personal experience, Ubuntu Distro is one of the best for the beginner. It has much user friendly features compared to the other distos but with time as you learn and after getting used to Linux, you can try out other distros too Wink

jackg

copper member

Activity: 2856

Merit: 3071

https://bit.ly/387FXHi lightning theory

Quote from: OmegaStarScream on December 30, 2019, 12:43:40 PM

Since you're a beginner with Linux, starting with Ubuntu/Kubuntu[1] might be a good idea but you should be fine with any distribution really, it's just a matter of preferences.

[1] https://bitcoin.org/en/full-node#linux-instructions

I quite like debian too for running more complex stuff that requires too many dependencies for minimalistic distros.

I think core was best optimised for some flavour of debian as it seems to run much better on them than it does any other distor (fewer extra things to install)...

Heisenberg_Hunter

legendary

Activity: 1583

Merit: 1276

Heisenberg Design Services

As OmegaStarScream pointed out, you could better go with Ubuntu or a simple Tails OS as well. Ubuntu is one of the best newbie friendly Linux based operating system out in the market and on top of that they do have 'Personal Package Archives'. I have been using Ubuntu for quite a long time and I am really pleased with the newbie-friendly feel it does provide to the new Linux users.

The major problem with using a Tails OS for running a full node is that it makes us to download the blockchain again since disconnecting from the host does make the Tails OS to erase all the older memories it has stored. FreeBSD is a better option for you to run the native client and I guess the BSD comes with a bitcoind package in the repository (though I am not really sure about this)

Once you get used to the Linux based OS quite often, I recommend you to try with Arch Linux. These OS are mostly used by Developers and advanced Linux users and they do offer a pretty good security when comparing with other Linux based operating systems. Linux Mint acts as a perfect alternative to Ubuntu OS but either way its really good to start off with Ubuntu. I personally have been using Ubuntu and WSL in Windows 10 and have been compiling Core for over a year and I would recommend the same for you as well.

cryptoperkele

member

Activity: 889

Merit: 60

Quote from: OmegaStarScream on December 30, 2019, 12:43:40 PM

Since you're a beginner with Linux, starting with Ubuntu/Kubuntu[1] might be a good idea but you should be fine with any distribution really, it's just a matter of preferences.

[1] https://bitcoin.org/en/full-node#linux-instructions

Cool, if it doesn't matter i'll just google some popular version then. Thanks.

OmegaStarScream

staff

Activity: 3472

Merit: 6129

Since you're a beginner with Linux, starting with Ubuntu/Kubuntu[1] might be a good idea but you should be fine with any distribution really, it's just a matter of preferences.

[1] https://bitcoin.org/en/full-node#linux-instructions

cryptoperkele

member

Activity: 889

Merit: 60

Hi, i am a Linux noob and would like to know which Linux version should i start with my laptop if i want to run a Bitcoin node and various altcoin nodes?
Pros and cons pretty please.

Topic: Running nodes on linux (Read 176 times)