You can do it yourself by using the tools to flash your Bios and manually configure all the settings in polaris bios editor.
If you don't mind spending a low amount of money you can find really good bios setup on mining-bios.eu
Note: I am in no way affiliated with the site, they just happen to make very good bioses for mining for each rx series.
Topic: Rx 470,480, 570 cannot undervolt (Read 188 times)
thx for the fast answer
Where I can find the right figures for the Polaris Bios Editor
Example
GPU 910 MHz 65283 mV
https://drive.google.com/open?id=1r7mditrXD9Ph-aspgQEyf-8simhD4yeS
Where I can find the right figures for the Polaris Bios Editor
Example
GPU 910 MHz 65283 mV
https://drive.google.com/open?id=1r7mditrXD9Ph-aspgQEyf-8simhD4yeS
My Windows 10 Polaris Rig won't undervolt 
- I tried the claymore command line -cvdcc
- I tried OverdriveNTool 0.2.5
- I tried MSI Afterburner v 4.5.0 (the vcore is greyed)
I attached a sample picture of my RX 480 Card. The Vcore should be 825 but it's 918 ( GPU-Z and HW Info show the same high vcore)
https://lh6.googleusercontent.com/29EAj2ZhK7LyRDH-foxk-NMghrdo2ke2Nnygf4iS3P8fBVHnYLCk8zg5qmRzvyJZucNPY61Z_Mkf9o7Sdc1J=w2560-h1330-rw
How can I fix this problem?
- I tried the claymore command line -cvdcc
- I tried OverdriveNTool 0.2.5
- I tried MSI Afterburner v 4.5.0 (the vcore is greyed)
I attached a sample picture of my RX 480 Card. The Vcore should be 825 but it's 918 ( GPU-Z and HW Info show the same high vcore)
https://lh6.googleusercontent.com/29EAj2ZhK7LyRDH-foxk-NMghrdo2ke2Nnygf4iS3P8fBVHnYLCk8zg5qmRzvyJZucNPY61Z_Mkf9o7Sdc1J=w2560-h1330-rw
How can I fix this problem?
Bios Flash with the right vcore.
My Windows 10 Polaris Rig won't undervolt
- I tried the claymore command line -cvdcc
- I tried OverdriveNTool 0.2.5
- I tried MSI Afterburner v 4.5.0 (the vcore is greyed)
I attached a sample picture of my RX 480 Card. The Vcore should be 825 but it's 918 ( GPU-Z and HW Info show the same high vcore)
https://lh6.googleusercontent.com/29EAj2ZhK7LyRDH-foxk-NMghrdo2ke2Nnygf4iS3P8fBVHnYLCk8zg5qmRzvyJZucNPY61Z_Mkf9o7Sdc1J=w2560-h1330-rw
How can I fix this problem?
- I tried the claymore command line -cvdcc
- I tried OverdriveNTool 0.2.5
- I tried MSI Afterburner v 4.5.0 (the vcore is greyed)
I attached a sample picture of my RX 480 Card. The Vcore should be 825 but it's 918 ( GPU-Z and HW Info show the same high vcore)
https://lh6.googleusercontent.com/29EAj2ZhK7LyRDH-foxk-NMghrdo2ke2Nnygf4iS3P8fBVHnYLCk8zg5qmRzvyJZucNPY61Z_Mkf9o7Sdc1J=w2560-h1330-rw
How can I fix this problem?
Jump to: