You must connect all the power connectors you have on the graphics card.
Thats not correct, my Sapphire RX 570 4gb run just fine with 8 pol power conmector no need for the additional 6 pol branch. 
Topic: RX 570 nitro+ power consumption (Read 752 times)
You must connect all the power connectors you have on the graphics card.
rx 570 has 8pin connector and a 6pin connector, did you connect both? maybe i have to connect only 8 pin to reduce wattage?
i'm searching for info but google do not help me.
thank you guys
i'm searching for info but google do not help me.
thank you guys
i think something wrong
my rig get at wall 480watt for a while, then the consumption grow up to 950watt in 2 day
so i flash bios with same rom and consumption back to 550
and again and again
why?!
maybe psu not efficient? (i'm using old psu for now)
i don't understand.. please
my rig get at wall 480watt for a while, then the consumption grow up to 950watt in 2 day
so i flash bios with same rom and consumption back to 550
and again and again
why?!
maybe psu not efficient? (i'm using old psu for now)
i don't understand.. please
thank you guys for all answers! really 
in this moment i'm using a mod bios from anorak.tech specific for my Rx 570 4gb (113-2E366FU-053) power safe with msi ab:
mv -93
core clock 900
memory clock 2100
fan 55%
temp. 41c
ethereum mhs 19 solo mode
and a rx570 8gb (113-2E366AU-X56) also modded
mv -93
core clock 900
memory clock 2100
fan 55%
temp. 41c
ethereum mhs 19 solo mode
800watt at the wall for only 38 mhs
now i ddu all drivers and try AMD blockchain driver (latest 23th august right?)
after this i try -cvddc 875 in bat
in this moment i'm using a mod bios from anorak.tech specific for my Rx 570 4gb (113-2E366FU-053) power safe with msi ab:
mv -93
core clock 900
memory clock 2100
fan 55%
temp. 41c
ethereum mhs 19 solo mode
and a rx570 8gb (113-2E366AU-X56) also modded
mv -93
core clock 900
memory clock 2100
fan 55%
temp. 41c
ethereum mhs 19 solo mode
800watt at the wall for only 38 mhs
now i ddu all drivers and try AMD blockchain driver (latest 23th august right?)
after this i try -cvddc 875 in bat
hie,
does power limit make sense anything by making powlim +10
I have MSI Armor Oc rx570's with 4gb Elpida Memory.
I modded my bios with the 1500 Straps, undervolted to 900mv, TDP 75w, max power limit 100w. Afterburner settings to -57mv, +15% power limit, 1128 core clock, 1750 mem. They were hashing at 25-26 MH/s each with 88w at the wall each mining ETH. One runs on the radeon mining drivers, the other doesn't (setup on two different computers). I think the 570's are a bit tempermental compared to the 470's. Not sure about the 580's.
You really need to mod the bios to get a better Hash rate to power consumption ratio. For me I would rather hash at 26 MH/s at 88w compared to 28 MH/s at 150w. @88w at the wall, the fans only run at like 25% so they are very quiet for in-house mining. They operate at 56C right now. Currently I'm mining on cryptonight algo at 735-740 H/s using the same bios setup because I was too lazy to reflash 1268 core, 1750 mem, 87-88w @ the wall.
I modded my bios with the 1500 Straps, undervolted to 900mv, TDP 75w, max power limit 100w. Afterburner settings to -57mv, +15% power limit, 1128 core clock, 1750 mem. They were hashing at 25-26 MH/s each with 88w at the wall each mining ETH. One runs on the radeon mining drivers, the other doesn't (setup on two different computers). I think the 570's are a bit tempermental compared to the 470's. Not sure about the 580's.
You really need to mod the bios to get a better Hash rate to power consumption ratio. For me I would rather hash at 26 MH/s at 88w compared to 28 MH/s at 150w. @88w at the wall, the fans only run at like 25% so they are very quiet for in-house mining. They operate at 56C right now. Currently I'm mining on cryptonight algo at 735-740 H/s using the same bios setup because I was too lazy to reflash
1268 core, 1750 mem, 87-88w @ the wall.i found all item in polaris except the undervolted.. where do you set it?
thanks
I have MSI Armor Oc rx570's with 4gb Elpida Memory.
I modded my bios with the 1500 Straps, undervolted to 900mv, TDP 75w, max power limit 100w. Afterburner settings to -57mv, +15% power limit, 1128 core clock, 1750 mem. They were hashing at 25-26 MH/s each with 88w at the wall each mining ETH. One runs on the radeon mining drivers, the other doesn't (setup on two different computers). I think the 570's are a bit tempermental compared to the 470's. Not sure about the 580's.
You really need to mod the bios to get a better Hash rate to power consumption ratio. For me I would rather hash at 26 MH/s at 88w compared to 28 MH/s at 150w. @88w at the wall, the fans only run at like 25% so they are very quiet for in-house mining. They operate at 56C right now. Currently I'm mining on cryptonight algo at 735-740 H/s using the same bios setup because I was too lazy to reflash 1268 core, 1750 mem, 87-88w @ the wall.
I modded my bios with the 1500 Straps, undervolted to 900mv, TDP 75w, max power limit 100w. Afterburner settings to -57mv, +15% power limit, 1128 core clock, 1750 mem. They were hashing at 25-26 MH/s each with 88w at the wall each mining ETH. One runs on the radeon mining drivers, the other doesn't (setup on two different computers). I think the 570's are a bit tempermental compared to the 470's. Not sure about the 580's.
You really need to mod the bios to get a better Hash rate to power consumption ratio. For me I would rather hash at 26 MH/s at 88w compared to 28 MH/s at 150w. @88w at the wall, the fans only run at like 25% so they are very quiet for in-house mining. They operate at 56C right now. Currently I'm mining on cryptonight algo at 735-740 H/s using the same bios setup because I was too lazy to reflash
1268 core, 1750 mem, 87-88w @ the wall.thank you!
yesterday my watt-o-meter at wall go down, so now i don't know the real wattage. But i take your good example and i'll try new configuration
with the new amd blockchain driver now i get 80mhs for 3 gpu. next step optimize power consumption
thank you again
I have MSI Armor Oc rx570's with 4gb Elpida Memory.
I modded my bios with the 1500 Straps, undervolted to 900mv, TDP 75w, max power limit 100w. Afterburner settings to -57mv, +15% power limit, 1128 core clock, 1750 mem. They were hashing at 25-26 MH/s each with 88w at the wall each mining ETH. One runs on the radeon mining drivers, the other doesn't (setup on two different computers). I think the 570's are a bit tempermental compared to the 470's. Not sure about the 580's.
You really need to mod the bios to get a better Hash rate to power consumption ratio. For me I would rather hash at 26 MH/s at 88w compared to 28 MH/s at 150w. @88w at the wall, the fans only run at like 25% so they are very quiet for in-house mining. They operate at 56C right now. Currently I'm mining on cryptonight algo at 735-740 H/s using the same bios setup because I was too lazy to reflash 1268 core, 1750 mem, 87-88w @ the wall.
I modded my bios with the 1500 Straps, undervolted to 900mv, TDP 75w, max power limit 100w. Afterburner settings to -57mv, +15% power limit, 1128 core clock, 1750 mem. They were hashing at 25-26 MH/s each with 88w at the wall each mining ETH. One runs on the radeon mining drivers, the other doesn't (setup on two different computers). I think the 570's are a bit tempermental compared to the 470's. Not sure about the 580's.
You really need to mod the bios to get a better Hash rate to power consumption ratio. For me I would rather hash at 26 MH/s at 88w compared to 28 MH/s at 150w. @88w at the wall, the fans only run at like 25% so they are very quiet for in-house mining. They operate at 56C right now. Currently I'm mining on cryptonight algo at 735-740 H/s using the same bios setup because I was too lazy to reflash
1268 core, 1750 mem, 87-88w @ the wall. hi guys
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
What clocks are you running on the GPU? That kind of power consumption seems way of and way above 100% PL for two of them. Nothing else eating up electricity?
How hot are the GPUs?
Just for your reference my rig with 6x RX 570 is consuming 530W off the wall with cryptonight and 720W for dagger.
Don't start at -cvvdc 875. All cards are different and yours may not be capable of going to core voltages that low. You could try with -cvddc 900 and then if it doesn't crash, slowly start lowering in increments of -5.
I agree .
Don't start at -cvvdc 875. All cards are different and yours may not be capable of going to core voltages that low. You could try with -cvddc 900 and then if it doesn't crash, slowly start lowering in increments of -5.
hi guys
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
ddu your drivers and install blockchain drivers.
search for modified bios from google
flash the modified bios, run ati patcher
insert -cvddc 875 in bat file in claymore miner
run memory clock at 2100 in msi ab for 30 mh/s
with amd blockchain driver my 4gb rx up to 30mhs thank you..
last question... can you send me you claymore mining string? i tried -cvddc 875 but mining stops with error
thanks again
hi guys
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
What clocks are you running on the GPU? That kind of power consumption seems way of and way above 100% PL for two of them. Nothing else eating up electricity?
How hot are the GPUs?
Just for your reference my rig with 6x RX 570 is consuming 530W off the wall with cryptonight and 720W for dagger.
hi
core clock 900
memory 2100
temperature 45c
and Nothing else use electricity
thank you!
thank you guys for all answers! really
in this moment i'm using a mod bios from anorak.tech specific for my Rx 570 4gb (113-2E366FU-053) power safe with msi ab:
mv -93
core clock 900
memory clock 2100
fan 55%
temp. 41c
ethereum mhs 19 solo mode
and a rx570 8gb (113-2E366AU-X56) also modded
mv -93
core clock 900
memory clock 2100
fan 55%
temp. 41c
ethereum mhs 19 solo mode
800watt at the wall for only 38 mhs
now i ddu all drivers and try AMD blockchain driver (latest 23th august right?)
after this i try -cvddc 875 in bat
in this moment i'm using a mod bios from anorak.tech specific for my Rx 570 4gb (113-2E366FU-053) power safe with msi ab:
mv -93
core clock 900
memory clock 2100
fan 55%
temp. 41c
ethereum mhs 19 solo mode
and a rx570 8gb (113-2E366AU-X56) also modded
mv -93
core clock 900
memory clock 2100
fan 55%
temp. 41c
ethereum mhs 19 solo mode
800watt at the wall for only 38 mhs
now i ddu all drivers and try AMD blockchain driver (latest 23th august right?)
after this i try -cvddc 875 in bat
24mhs seems normal as the dag is going up,
did you mean 24mhs for the 2 ?
You can check for the bios and oc at 1stminingrig
did you mean 24mhs for the 2 ?
You can check for the bios and oc at 1stminingrig
The DAG problem has already been solved, just use the blockchain driver.
It yields from 29 to 30 mhs.
hi guys
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
ddu your drivers and install blockchain drivers.
search for modified bios from google
flash the modified bios, run ati patcher
insert -cvddc 875 in bat file in claymore miner
run memory clock at 2100 in msi ab for 30 mh/s
hi guys
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
What clocks are you running on the GPU? That kind of power consumption seems way of and way above 100% PL for two of them. Nothing else eating up electricity?
How hot are the GPUs?
Just for your reference my rig with 6x RX 570 is consuming 530W off the wall with cryptonight and 720W for dagger.
24mhs seems normal as the dag is going up,
did you mean 24mhs for the 2 ?
You can check for the bios and oc at 1stminingrig
did you mean 24mhs for the 2 ?
You can check for the bios and oc at 1stminingrig
hi guys
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
anyone mine ethereum with RX 570 4gb/8gb (elpida/hynix)
i used many bios, many afterburner settings, many amd driver but hashrate stop at 24 and power consumption is HUGE (over 800w at wall for 2 gpus!!!)
configuration:
i3 4gb
win10
claymore 10
amd driver 17.11
can you post your bios/settings for a benchmark? i don't understand
thank you!
Jump to: