Cannot mine, but can use system with GPU turned on, thats a progres.
Any advice ?
Topic: RX 5700XT REF HiveOs hangs at loading drivers. (Read 283 times)
After runing in maintence mode, i`ve flashed MODED bios and got this
Cannot mine, but can use system with GPU turned on, thats a progres.
Any advice ?
Cannot mine, but can use system with GPU turned on, thats a progres.
Any advice ?
Kernel Panic pops up after 5-10s after hanged at Driver loading.
Just keep in mind, i`ve got USB stick, not SSD.
Pleas, speak. It`s motivationg to do more....
I`ll past somme photos soon - had sommething.
Just keep in mind, i`ve got USB stick, not SSD.
Pleas, speak. It`s motivationg to do more....
I`ll past somme photos soon - had sommething.
PLease understand. The problem is not miner. System wont start.
Whatever i`ll set it wont work at all.
I was changing sticks, HiveOS ver. MB, PSU - you name it.
Whatever i`ll set it wont work at all.
I was changing sticks, HiveOS ver. MB, PSU - you name it.
That happens at 52s ... normally Miner is running...
PLease understand. The problem is not miner. System wont start.
Whatever i`ll set it wont work at all.
I was changing sticks, HiveOS ver. MB, PSU - you name it.
Whatever i`ll set it wont work at all.
I was changing sticks, HiveOS ver. MB, PSU - you name it.
Just bought a RX5700XT REF (samsung memory).
Was mining nicely for 24h on TRM 0.8.
After TRM watchdog (GPU1 DEAD) reboot, Hive hangs on loading AMD drivers.
I can enter the system in meaintance mode without loaded drivers.
I was using power saving settings - 1200 core 880 mem at low voltages with autofan enabled to keep temps at 85*C.
Any ideas what to do with it now ??
EDIT
Had 2 others GPU like that. One mining for 2 weeks on settings 1400/880 (TRM 0.7.22), and another witch came with the broken one - 30h of mining by now.
Was mining nicely for 24h on TRM 0.8.
After TRM watchdog (GPU1 DEAD) reboot, Hive hangs on loading AMD drivers.
I can enter the system in meaintance mode without loaded drivers.
I was using power saving settings - 1200 core 880 mem at low voltages with autofan enabled to keep temps at 85*C.
Any ideas what to do with it now ??
EDIT
Had 2 others GPU like that. One mining for 2 weeks on settings 1400/880 (TRM 0.7.22), and another witch came with the broken one - 30h of mining by now.
I have the same problem with the same REF with Samsung ends always crashing with TeamRed... only option was for me a swap... I try more Core Voltage... less Mem...
Quote
Do you have access to the rig or is it remote only? Sounds like a crash that only a hard power reset can fix. Update newest hive client don't use beta if you are, and you might have to loosen your OC more to keep it 100% stable.
I can access it - it`s my testing rig, where i test oc, change bios etc.system stops just after HIVE logo with "Loading AMD Drivers ..." massage
soon after - Kernel Panic - not syncing: Timeout : Not all CPU`s entered broadcast exception handler
sometimes the os on a usb stick turns bad.
I would think it could be you need to flash the usb stick or replace it.
Quote
Do you have access to the rig or is it remote only? Sounds like a crash that only a hard power reset can fix. Update newest hive client don't use beta if you are, and you might have to loosen your OC more to keep it 100% stable.
I can access it - it`s my testing rig, where i test oc, change bios etc.system stops just after HIVE logo with "Loading AMD Drivers ..." massage
soon after - Kernel Panic - not syncing: Timeout : Not all CPU`s entered broadcast exception handler
I`m not familiar with smos, but i will be.
burn a smos usb stick and see if that works.
https://simplemining.net/page/download
you could have 4 or 5 issues.
if the smos stick works it is a software issue with hive.
https://simplemining.net/page/download
you could have 4 or 5 issues.
if the smos stick works it is a software issue with hive.
Just bought a RX5700XT REF (samsung memory).
Was mining nicely for 24h on TRM 0.8.
After TRM watchdog (GPU1 DEAD) reboot, Hive hangs on loading AMD drivers.
I can enter the system in meaintance mode without loaded drivers.
I was using power saving settings - 1200 core 880 mem at low voltages with autofan enabled to keep temps at 85*C.
Any ideas what to do with it now ??
EDIT
Had 2 others GPU like that. One mining for 2 weeks on settings 1400/880 (TRM 0.7.22), and another witch came with the broken one - 30h of mining by now.
Was mining nicely for 24h on TRM 0.8.
After TRM watchdog (GPU1 DEAD) reboot, Hive hangs on loading AMD drivers.
I can enter the system in meaintance mode without loaded drivers.
I was using power saving settings - 1200 core 880 mem at low voltages with autofan enabled to keep temps at 85*C.
Any ideas what to do with it now ??
EDIT
Had 2 others GPU like that. One mining for 2 weeks on settings 1400/880 (TRM 0.7.22), and another witch came with the broken one - 30h of mining by now.
Do you have access to the rig or is it remote only? Sounds like a crash that only a hard power reset can fix. Update newest hive client don't use beta if you are, and you might have to loosen your OC more to keep it 100% stable.
if it`s 5th time at least, that tells me, you dont konw what you writing about. You`re welcome.
Are you sure you are here to solve your mining rig problem or you are here to belittle those who are trying to help you? You can learn one or two things from even the dumbest person, is there enough RAM space on your PC? Have you tried other mining OS or software? Are you using the adrenaline drivers?
if it`s 5th time at least, that tells me, you dont konw what you writing about. You`re welcome.
I've read like 5 times and I still don't get it, is the card not displaying anymore or it's not mining anymore? Which one of the two? Any ways change the driver and also active compute mode in AMD driver settings and retry, also try changing miner if possible just to confirm, I will be waiting for your reply
Just bought a RX5700XT REF (samsung memory).
Was mining nicely for 24h on TRM 0.8.
After TRM watchdog (GPU1 DEAD) reboot, Hive hangs on loading AMD drivers.
I can enter the system in meaintance mode without loaded drivers.
I was using power saving settings - 1200 core 880 mem at low voltages with autofan enabled to keep temps at 85*C.
Any ideas what to do with it now ??
EDIT
Had 2 others GPU like that. One mining for 2 weeks on settings 1400/880 (TRM 0.7.22), and another witch came with the broken one - 30h of mining by now.
Was mining nicely for 24h on TRM 0.8.
After TRM watchdog (GPU1 DEAD) reboot, Hive hangs on loading AMD drivers.
I can enter the system in meaintance mode without loaded drivers.
I was using power saving settings - 1200 core 880 mem at low voltages with autofan enabled to keep temps at 85*C.
Any ideas what to do with it now ??
EDIT
Had 2 others GPU like that. One mining for 2 weeks on settings 1400/880 (TRM 0.7.22), and another witch came with the broken one - 30h of mining by now.
Jump to: