edit your start file -cclok 1200 -cvddc 980 -mclock 2100
i have 6 strix 580 top oc i try so many config and i think is the best
Topic: RX 580 Asus Strix 8GB on Samsung Memory (Read 4112 times)
k
I have the same cards, they doesn't work with Samsung uber-mix straps
What? I have the same cards, they doesn't work with Samsung uber-mix straps
I'm having six Asus Strix 8GB RX580 cards delivered next week and would also be interested in exact settings that work well.
Just don't use the 1750MHz strap!If you will have Samsung use Uber-Mix! Look at my guide.
I have the same cards, they doesn't work with Samsung uber-mix straps
I'm having six Asus Strix 8GB RX580 cards delivered next week and would also be interested in exact settings that work well.
Just don't use the 1750MHz strap!If you will have Samsung use Uber-Mix! Look at my guide.
I'm having six Asus Strix 8GB RX580 cards delivered next week and would also be interested in exact settings that work well.
So... After some testing...
My best settings for now:
GPUClock 1050
MemoryClock 2000
GPUVoltage 987
straps copied from 1750 to 2000
4 GPU Asus Strix RX 580 on Samsung memory - 111Mh/s (Ethereum only), 525W from wall
I'm very impressed by temperatures: about 50-55C
Can anyone share their best settings for that card? Maybe some bios mod?
My best settings for now:
GPUClock 1050
MemoryClock 2000
GPUVoltage 987
straps copied from 1750 to 2000
4 GPU Asus Strix RX 580 on Samsung memory - 111Mh/s (Ethereum only), 525W from wall
I'm very impressed by temperatures: about 50-55C
Can anyone share their best settings for that card? Maybe some bios mod?
THX I'll test it.
BTW Do You mine dual (ETH+DCR)? I've got some problem with it.
When I'm starting dual mining (ETH+DCR) after few minutes computer hangs up.
When I mine solo only ETH it works just fine - tested for 24h without any problem.
Any clues?
Oh... I'm on Crimson 17.5.2 Beta drivers.
BTW Do You mine dual (ETH+DCR)? I've got some problem with it.
When I'm starting dual mining (ETH+DCR) after few minutes computer hangs up.
When I mine solo only ETH it works just fine - tested for 24h without any problem.
Any clues?
Oh... I'm on Crimson 17.5.2 Beta drivers.
Make sure you're not undervolting your cards as that caused hiccups in dual mining, also make sure the -dcri is lower than 30, sometimes even 20 or 10 to make it stable, just try different settings until one is.
THX I'll test it.
BTW Do You mine dual (ETH+DCR)? I've got some problem with it.
When I'm starting dual mining (ETH+DCR) after few minutes computer hangs up.
When I mine solo only ETH it works just fine - tested for 24h without any problem.
Any clues?
Oh... I'm on Crimson 17.5.2 Beta drivers.
BTW Do You mine dual (ETH+DCR)? I've got some problem with it.
When I'm starting dual mining (ETH+DCR) after few minutes computer hangs up.
When I mine solo only ETH it works just fine - tested for 24h without any problem.
Any clues?
Oh... I'm on Crimson 17.5.2 Beta drivers.
Can You send me Your exact settings?
My current settings (more tweaking to be done later after work
) are:-96mV
0% power change
1300 GPU clock
2200 GPU memory
Everything else is stock including the BIOS
Can You send me Your exact settings?
Still experimenting with mine, however I can confirm even at -96 mV it is stable and happy.
Additionally, the reduced voltage means the GPU can hit higher speeds which (although less important than memory speeds) still makes a difference.
Additionally, the reduced voltage means the GPU can hit higher speeds which (although less important than memory speeds) still makes a difference.
Play around with programs like msi afterburner and decrease it to -75mv and check it's stable.
If yes, increase it to -100 and see again.
You just have to test to find the best undervolting, core and memory clocks for your card till you reach something that satisfies you.
If yes, increase it to -100 and see again.
You just have to test to find the best undervolting, core and memory clocks for your card till you reach something that satisfies you.
Hi,
This is my first post so HELLO everyone
but...
I've bought some Asus RX580 Strix with Samsung Memory and I'm trying to undervolt it to mine ETHEREUM.
On stock BIOS I'm getting 24MH/s
Now I've copied 1750 straps to 2000 and I'm getting about 27MH/s but with 180W power usage.
Is it possible to lower power usage with that hashrate?
This is my first post so HELLO everyone
but...
I've bought some Asus RX580 Strix with Samsung Memory and I'm trying to undervolt it to mine ETHEREUM.
On stock BIOS I'm getting 24MH/s
Now I've copied 1750 straps to 2000 and I'm getting about 27MH/s but with 180W power usage.
Is it possible to lower power usage with that hashrate?
Jump to: