RX 580 problem... | Bitcointalksearch.org

lenoli

hero member

Activity: 756

Merit: 501

Quote from: Vann on June 30, 2017, 06:00:15 PM

If you can't get it to recognize in Windows, you could try flashing the original Bios back to the card using atiflash from Dos by creating a boot disk.

https://www.sevenforums.com/tutorials/46707-ms-dos-bootable-flash-drive-create.html

https://www.techpowerup.com/forums/threads/how-to-use-atiflash.57750

http://www.overclock.net/t/1353325/tutorial-atiwinflash-how-to-flash-the-bios-of-your-ati-cards

http://www.overclock.net/t/593427/how-to-unbrick-your-bricked-graphics-card-fix-a-failed-bios-flash/230#post_25463481

There is also a member here that does GPU repair work. You may want to contact him to see if he has any suggestions. Good luck.

https://bitcointalksearch.org/topic/hacking-gpu-cards-back-into-operation-because-i-need-something-to-do-1746977

thanks Vann, it helps my, my GPU is working now without any problem. thanks a lot again for your attention and help.

wish you good luck and many successes,

P.S i am locking this thread...

good luck to everyone...

Vann

hero member

Activity: 1036

Merit: 606

Quote from: lenoli on June 30, 2017, 05:29:41 PM

Quote from: Vann on June 30, 2017, 05:00:35 PM

Quote from: lenoli on June 30, 2017, 04:54:10 PM

Quote from: Vann on June 30, 2017, 04:44:46 PM

I would remove all the other cards and connect the card not working directly in the primary PCI-E x16 slot. Remove the drivers in safe mode using DDU and install the latest driver from the AMD website. If the card is still not detected in the Device Manager, then you probably have a dead card and will have to RMA it under warranty. If you have flashed a modded Bios to the card, it may not be replaced under warranty.

i have already connected this non working card directly to the PCI slot and installed driver, but didnton tried in safe mode, i will try it tomorrow, but i dont understand, if GPU is dead, why are leds lighting when i an turning pc on?

Without eliminating the other possibilities it's hard to know. It could be a bad Bios flash. Also try another card that's working in the PCI-E x16 slot to make sure it's not a bad slot on the motherboard. If another card works and the other one doesn't, then it can only be a dead card. Unfortunately if it's not detected by Windows, I don't think you will be able to flash the card with a good Bios.

thank you for your attention, i will try all these tomorrow and i will write what will happens. thanks a lot once again and good luck

If you can't get it to recognize in Windows, you could try flashing the original Bios back to the card using atiflash from Dos by creating a boot disk.

https://www.sevenforums.com/tutorials/46707-ms-dos-bootable-flash-drive-create.html

https://www.techpowerup.com/forums/threads/how-to-use-atiflash.57750

http://www.overclock.net/t/1353325/tutorial-atiwinflash-how-to-flash-the-bios-of-your-ati-cards

http://www.overclock.net/t/593427/how-to-unbrick-your-bricked-graphics-card-fix-a-failed-bios-flash/230#post_25463481

There is also a member here that does GPU repair work. You may want to contact him to see if he has any suggestions. Good luck.

https://bitcointalksearch.org/topic/hacking-gpu-cards-back-into-operation-because-i-need-something-to-do-1746977

fanatic26

hero member

Activity: 756

Merit: 560

The LEDs lighting up just mean the card is being supplied power, there are many other things that can die that will make it non functional. Your card is dead and needs to be warrantied.

lenoli

hero member

Activity: 756

Merit: 501

Quote from: Vann on June 30, 2017, 05:00:35 PM

Quote from: lenoli on June 30, 2017, 04:54:10 PM

Quote from: Vann on June 30, 2017, 04:44:46 PM

I would remove all the other cards and connect the card not working directly in the primary PCI-E x16 slot. Remove the drivers in safe mode using DDU and install the latest driver from the AMD website. If the card is still not detected in the Device Manager, then you probably have a dead card and will have to RMA it under warranty. If you have flashed a modded Bios to the card, it may not be replaced under warranty.

i have already connected this non working card directly to the PCI slot and installed driver, but didnton tried in safe mode, i will try it tomorrow, but i dont understand, if GPU is dead, why are leds lighting when i an turning pc on?

Without eliminating the other possibilities it's hard to know. It could be a bad Bios flash. Also try another card that's working in the PCI-E x16 slot to make sure it's not a bad slot on the motherboard. If another card works and the other one doesn't, then it can only be a dead card. Unfortunately if it's not detected by Windows, I don't think you will be able to flash the card with a good Bios.

thank you for your attention, i will try all these tomorrow and i will write what will happens. thanks a lot once again and good luck

Vann

hero member

Activity: 1036

Merit: 606

Quote from: lenoli on June 30, 2017, 04:54:10 PM

Quote from: Vann on June 30, 2017, 04:44:46 PM

I would remove all the other cards and connect the card not working directly in the primary PCI-E x16 slot. Remove the drivers in safe mode using DDU and install the latest driver from the AMD website. If the card is still not detected in the Device Manager, then you probably have a dead card and will have to RMA it under warranty. If you have flashed a modded Bios to the card, it may not be replaced under warranty.

i have already connected this non working card directly to the PCI slot and installed driver, but didnton tried in safe mode, i will try it tomorrow, but i dont understand, if GPU is dead, why are leds lighting when i an turning pc on?

Without eliminating the other possibilities it's hard to know. It could be a bad Bios flash. Also try another card that's working in the PCI-E x16 slot to make sure it's not a bad slot on the motherboard. If another card works and the other one doesn't, then it can only be a dead card. Unfortunately if it's not detected by Windows, I don't think you will be able to flash the card with a good Bios.

lenoli

hero member

Activity: 756

Merit: 501

Quote from: Vann on June 30, 2017, 04:44:46 PM

I would remove all the other cards and connect the card not working directly in the primary PCI-E x16 slot. Remove the drivers in safe mode using DDU and install the latest driver from the AMD website. If the card is still not detected in the Device Manager, then you probably have a dead card and will have to RMA it under warranty. If you have flashed a modded Bios to the card, it may not be replaced under warranty.

i have already connected this non working card directly to the PCI slot and installed driver, but didnton tried in safe mode, i will try it tomorrow, but i dont understand, if GPU is dead, why are leds lighting when i an turning pc on?

Vann

hero member

Activity: 1036

Merit: 606

Quote from: lenoli on June 30, 2017, 04:37:31 PM

Quote from: Vann on June 30, 2017, 04:31:51 PM

Quote from: lenoli on June 30, 2017, 04:25:21 PM

Quote from: Vann on June 30, 2017, 03:20:43 PM

You need to patch the Windows 10 driver using the Windows 7 driver for 6+ RX 570/580 cards in WIndows 10.

https://www.youtube.com/watch?v=fTusQ0omj8M

i will try it tomorrow but i am not sure it will works, thanks anyway

Quote from: jpoker272727 on June 30, 2017, 03:40:03 PM

Is it showing in the Device Manager or not?

If the GPU is listed in Device manager but the miner client (i.e Claymore) doesn't recognize then there is a driver issue which only the patch can fix it. In the Device manager you will see a Yellow warning before the RX 580 Graphic Card text.

If the GPU isn't listed in Device manger then check if the lights of the GPU are on, can you see the leds, does the fan spin when you power the motherboard?

,

no its isnot shown in device manager, but leds are lighting and i am sure GPU is receiving power.

i am sure i must reset or change bios, but i dont know how Sad

It does work and you need to patch the drivers if you have 6+ RX 570/580 cards in WIndows 10.

https://bitcointalksearch.org/topic/m.18857146

i am talking about one GPU only. others are working fine, but when i am trying to use only this card, it isnot recognized by any motherboards, i already tried to use it on windows 10 and installed driver from disc, but nothing happens

I would remove all the other cards and connect the card not working directly in the primary PCI-E x16 slot. Remove the drivers in safe mode using DDU and install the latest driver from the AMD website. If the card is still not detected in the Device Manager, then you probably have a dead card and will have to RMA it under warranty. If you have flashed a modded Bios to the card, it may not be replaced under warranty.

lenoli

hero member

Activity: 756

Merit: 501

Quote from: Vann on June 30, 2017, 04:31:51 PM

Quote from: lenoli on June 30, 2017, 04:25:21 PM

Quote from: Vann on June 30, 2017, 03:20:43 PM

You need to patch the Windows 10 driver using the Windows 7 driver for 6+ RX 570/580 cards in WIndows 10.

https://www.youtube.com/watch?v=fTusQ0omj8M

i will try it tomorrow but i am not sure it will works, thanks anyway

Quote from: jpoker272727 on June 30, 2017, 03:40:03 PM

Is it showing in the Device Manager or not?

If the GPU is listed in Device manager but the miner client (i.e Claymore) doesn't recognize then there is a driver issue which only the patch can fix it. In the Device manager you will see a Yellow warning before the RX 580 Graphic Card text.

If the GPU isn't listed in Device manger then check if the lights of the GPU are on, can you see the leds, does the fan spin when you power the motherboard?

,

no its isnot shown in device manager, but leds are lighting and i am sure GPU is receiving power.

i am sure i must reset or change bios, but i dont know how Sad

It does work and you need to patch the drivers if you have 6+ RX 570/580 cards in WIndows 10.

https://bitcointalksearch.org/topic/m.18857146

i am talking about one GPU only. others are working fine, but when i am trying to use only this card, it isnot recognized by any motherboards, i already tried to use it on windows 10 and installed driver from disc, but nothing happens

Vann

hero member

Activity: 1036

Merit: 606

Quote from: lenoli on June 30, 2017, 04:25:21 PM

Quote from: Vann on June 30, 2017, 03:20:43 PM

You need to patch the Windows 10 driver using the Windows 7 driver for 6+ RX 570/580 cards in WIndows 10.

https://www.youtube.com/watch?v=fTusQ0omj8M

i will try it tomorrow but i am not sure it will works, thanks anyway

Quote from: jpoker272727 on June 30, 2017, 03:40:03 PM

Is it showing in the Device Manager or not?

If the GPU is listed in Device manager but the miner client (i.e Claymore) doesn't recognize then there is a driver issue which only the patch can fix it. In the Device manager you will see a Yellow warning before the RX 580 Graphic Card text.

If the GPU isn't listed in Device manger then check if the lights of the GPU are on, can you see the leds, does the fan spin when you power the motherboard?

,

no its isnot shown in device manager, but leds are lighting and i am sure GPU is receiving power.

i am sure i must reset or change bios, but i dont know how Sad

It does work and you need to patch the drivers if you have 6+ RX 570/580 cards in Windows 10.

https://bitcointalksearch.org/topic/m.18857146

lenoli

hero member

Activity: 756

Merit: 501

Quote from: Vann on June 30, 2017, 03:20:43 PM

You need to patch the Windows 10 driver using the Windows 7 driver for 6+ RX 570/580 cards in WIndows 10.

https://www.youtube.com/watch?v=fTusQ0omj8M

i will try it tomorrow but i am not sure it will works, thanks anyway

Quote from: jpoker272727 on June 30, 2017, 03:40:03 PM

Is it showing in the Device Manager or not?

If the GPU is listed in Device manager but the miner client (i.e Claymore) doesn't recognize then there is a driver issue which only the patch can fix it. In the Device manager you will see a Yellow warning before the RX 580 Graphic Card text.

If the GPU isn't listed in Device manger then check if the lights of the GPU are on, can you see the leds, does the fan spin when you power the motherboard?

,

no its isnot shown in device manager, but leds are lighting and i am sure GPU is receiving power.

i am sure i must reset or change bios, but i dont know how Sad

jpoker272727

legendary

Activity: 1137

Merit: 1000

Quote from: lenoli on June 30, 2017, 03:14:57 PM

guys, i need help...

i bought 6 RX 580, made config start mining, 5 of them are working fine, but last one isnot doing nothing, motherboard cannot recognize is, i tryed to use other motherboard for only this GPU, but this one also cannot recognize it, i dont know what to do, can someone help me or tell me how to make factory hardware reset?

thanks...

Is it showing in the Device Manager or not?

If the GPU is listed in Device manager but the miner client (i.e Claymore) doesn't recognize then there is a driver issue which only the patch can fix it. In the Device manager you will see a Yellow warning before the RX 580 Graphic Card text.

If the GPU isn't listed in Device manger then check if the lights of the GPU are on, can you see the leds, does the fan spin when you power the motherboard?

Vann

hero member

Activity: 1036

Merit: 606

You need to patch the Windows 10 driver using the Windows 7 driver for 6+ RX 570/580 cards in WIndows 10.

https://www.youtube.com/watch?v=fTusQ0omj8M

lenoli

hero member

Activity: 756

Merit: 501

guys, i need help...

i bought 6 RX 580, made config start mining, 5 of them are working fine, but last one isnot doing nothing, motherboard cannot recognize is, i tryed to use other motherboard for only this GPU, but this one also cannot recognize it, i dont know what to do, can someone help me or tell me how to make factory hardware reset?

thanks...

Topic: RX 580 problem... (Read 670 times)