Topic: RX570 Gigabyte (Read 12440 times)

What mining software are you using?
Maybe try in thread of this software?

Anyone know how to disable 'Fan Stop' feature on this card?
I have fan set to manual and maxed out in WattMan. The fan revs to 100% but stops to 0 every few minutes.
I can seem to disable fan stop completely! Please advice.

Hello
lookibg for stock bios RX570GAMIND-4GD-MI    MICRON.
plz help

~29 if Samsung memory, easiest way. Some Elpida modules can make 31, but i could't do this on my hardware. On other types of memory much worser.

here is the modified bios. this bios brings up to 28.50 MH/SEC with only 85watt power usage.i have tested this bois and working super fine.it will defiantly
helpful for gigabyte rx 570 gaming 4g 4gb samsung memory users.

That got me ~28.50 MH/s @ 1150 Mhz / 1950 Mhz @ 85watt (Total system=165watt , system idle takes 80watt and graphic card takes nearly 85watt)

Core Clock      -  1150
Memory Clock  -  1950
FAN               -   70%
Core Voltage   -   -96%
Power Limit     -   +10% here is the link

https://drive.google.com/open?id=0B3h40VsOK34jVDdyZ1pHWXdzSEE

GV-RX570GAMING-4GD RAM (SamSung) 29.6
https://anorak.tech/uploads/default/original/2X/3/325528da4b812cb24b40d56a03e1ce202dd81452.jpg

Strange stuff this 4GB Hynix... at 2080 I get no CDC errors, but at 2050 I get lots of them...

Hashrate is unaffected but I don't like hashing with CDC errors.

Anyone got a decent strap for it?

Aorus is way better at cooling for sure 7 Degrees C difference at least. Regarding the hash and memory still searching for optimal strap.

aorus has the most elaborate hardware.. backplate with relief for the back of the compute unit.. but it's not clocked as high as some of the other cards that are the generic release.

i kind of expected more considering the aorus is a step up from the gaming.

Aorus is the best , mine are doing 29.5 MHs , gaming it's a crap, mine are.

Cooler seems better

How is the hynix compared to the elpida? on the gaming?

I'd appreciate if you can give me some more info tomorrow!

Thanks

Probably cooler than the gaming model, will be able to check soon maybe tomorrow, they also have different memory (hynix)

Is the main difference between the 570 Gaming and AORUS the clock speed and back plate?

Anyone tried mining with the AORUS? How is it doing compared to the Gaming 570?

Thanks

http://1stminingrig.com/sapphire-rx-470-nitro-oc-4gb-bios-flash-mod-tutorial-hynix-elpida-samsung-micron/

Check the elpida bios and take the strap from there. Make sure it's the elpida strap.

Same in my case, can't get over 2000mhz. Strap 1500 to upper freqs.

I am able to strap and mod my own bios, however, my elpida memory doesn't get anywhere close to such results, so I am very curious about this.

also "the popular custom elpida strap" yields hundreds of results, and I don't even know if such a strap is from a 470/480/570/580 or from some other forum topic.

guys if you are unable to mod and strap your own bios at least learn to search.

helping the community is one thing, enabling poor form is another.

which one?

After 12H of testing 2075 yielded some small amount of CDC Errors.

Therefore I am now at 1200/2050 MHz hashing 29.6 MH/s

I used the popular custom elpida strap.

What mods did You do? I can get only 28.3, with 1500 straps. Over 2000 mem clock it hangs.

Were you able to setup all the 6 rx570 to run alltogether? What's your hashrate? Do you recommend me to Buy rx570 or rx470?

after reading all this I guess they are worth to give a try

Was able to reach 30 MH/s with Gigabyte RX 570 Gaming 4G (ELPIDA)

ETH Only mining 1200 / 2075 - 0 CDC ERRORS Over 30 minutes that's how long I am testing it. Lets hope it won't explode over night

Not liking the temps though... 63 Degrees C / Cooler 2220 RPM / .850 Voltage

I guess these 4GB cards are worth it.

• MSI Z270-A PRO
• GPU0-GPU2 : Gigabyte RX 570 Gaming 4G (GV-RX570GAMING-4GD) (ASIC Quality GPU0:80%; GPU1:76%; GPU2:67%)
• GPU3 : XFX RX 480 GTR 8GB (RX-480P8DFA6) (ASIC Quality GPU3:76%)
• 4x PCI-E Risers
• SmOS
• GPU0-GPU2: 1500 strap, With VDDCI mod - SRBPolaris
• GPU3: 3x3LowPwr.rom from https://forum.ethereum.org/discussion/11054/xfx-rx-480-rx-480m8bfa6-modded-bios
• 610W on the wall

GPU0 (1120/2070): 28.9 MH/s
GPU1 (1120/2030): 28.5 MH/s
GPU2 (1100/1980): 27,8 MH/s
GPU3: (1300/2200): 30,1 MH/s

https://images83.fotosik.pl/559/79e2fc43ab8ba7b0.jpg

• AsRock Pro BTC
• Coolermaster 1250W Platinum
• 6x Gigabyte G1 RX570 4GB Elpida
• 6x Pci-e risers
• Windows 10 x64
• Modified 16.9 Driver
• 1500 strap, TDP limit 150W
• Claymore 9.3 ETH+DCR
• 1050/1920 core/memory clocks
• 120W-140W power consumption in Afterburner
• 27.5MH/s and 680MH/s

Best I could have done. Any more optimization recommendations? I can't seem to be able to lower core voltage, nor increase memory clocks any further.

6 gpu rig takes 920 on the wall. So each gpu takes around 140 W.

@yatta what about power ussage from wall?

I have gigabyte rx 570 gaming 1 and i'm doing stable 28.3 MHs on eth.

Bought one of these Gigabyte RX570 4GB Gaming  cards to try it out and so far utterly disappointed.

Win 10 wouldn't recognize it along with my Sapphire RX470's rear blowers (love those) no matter what, so I unplugged all the Sapphire's, plugged this is and restarted in safe mode, used DDU to uninstall the driver, restarted, then installed the latest AMD Driver, upon which it got recognized. When I removed it and plugged in the Sapphires, windows wouldn't recognize then, so had to boot into safe mode, DDU and start again and let windows automaticaly recognize and install the driver.

It has Elpida memory, so I did the same bios updates as on the Sapphire's, i.e. copy 1500 timings to the higher numbers.

Underclocking the GPU to 1100 and overclocking Memory to 2000 like I do with the Sapphires, resulted in total instability and still only 25 mh/s - the Sapphires all yield 28.2 - 28.5 mh/s

I added this to my ethos (after updating to 1.2.1) rig and it was recognized. It will start out hashing at 28 mh/s for a minute, then drop down to 24.5 - 26.5 but with a very high incorrect / rejection rate.

Just changed the amdgpu settings with memory clock at 1920 and now it seems to be hashing at 27.175 constantly. So its at least 1mh/s slower than the Sapphire's and seems to be drawing much more power. Definitely not going to build a new rig with all of these.

Starting to think all these posts about 4gb 570 ELPIDA cards hashing over 28 are fake.

Possibly thats a Gigabyte RX 580 8gb card doing the 30s and he didn't read the topic.

I got both 570 gigabyte models coming in about a week (Aorus and Gaming)... Will post the results here.

I have the same elpida memory and results. Bios 1500 -> up to 2000. Max memory clock 1920 with 27,4MH/s and over 1920 my rig restarts anytime.


@adamvp how you modified your bios for around 30MH/s result? And do you modified your bios only or you did something else for that result?
And what about power consumption from the wall?

hello
I have 3  Gigabyte rx570 gaming 4G with elpida memory
1. max  memory clock 1920 and 27 MH
2. max  memory clock 1870 and 26.7 MH
3. max  memory clock 1800 and 24 MH

bios modify by copy 1500->1625,1750,2000.

How did you reach 30 ??

Can you tell us something about power usage or settings?

I am about to order 30x 570 and I would like to know if the memory difference is huge as in 470 series

Not stable Gpu 0 hangs

Is it stable at 30 MH? I just received some Gigabyte 570 but didn't get a chance to hook them up. From your picture seems like GPU 0 went to 0 MH.

Gigabyte 570 modded bios: elpida/micron

not exactly, MSI Rx 470 4gb 21mh/s,  sapphire Nitro+ RX470 22 MH/s, sapphire nitro+ 8gb RX 470 24-24.5 MH/s.
Numbers are before overclocking and bios updates.
In any case, this is good for used RX 470 (price will be stable) aka sellers market.

Unless someone can get these to work on older drivers (in order to mod the bios) we may be looking at a ~24 Mh/s wall on these new 570s. Unless they are far more power efficient the 470 still looks like the best option of the two (by a fair bit).

I was under the impression that the rebranded polaris GPU was suppose to be more efficient!

I checked on google it is same cpu of 470 but with more overclocked then it will drain more power, consider also nitro+ 470 have 8 pin power connector new 570 nitro+ have 8+6 pin connector (if require less power why need additional 6 pin ?)

Could you please check power consumption on this card? The same or lower than 470?

Ive been waiting for months for these cards, but i can grab 480 pretty cheap atm! So im considering buying those instead if the power consumption is the same!

Ty <3

I think bios modding tools will come soon..
Waiting for other algos and power consumption data.
Regards
Adamvp

I dont think can be good this 570 for some reasons:

- more higest price
- same hash rate ?
- no bios mod available
- power comsume ? (i see 6+8 power connector, why need it ? require more energy? it is also difficult add extra connectors on mining rig)

Can be good only for down price of old 470

try them on zeg the higer gpu speed is good for ZEC

I have both msi and gigabyte 470s and they all hash the same , i don't think msi and sapphire will differ , and 23 is really bad even if msi and sapphire will perform better their hashrate will be low compared to a bios moded 470

isnt the gigabyte ones the worst of the rx anyways? wait until sapphire, msi, etc

me too, 570 @ 23.5 around, no chance over to 24 without huge amount of errors.

Still only 22mh i'm disappointed,  I waited a month only mining on 1 card for theses 

What kind of GTX 1060 ,what brand do you have ? I have Palit StormX and max I can reach with it is 260-270 sol/s with stock settings. Power consumption is 100-105 watt. Have you done some modification to your card ?

Would love to see some Power numbers.

want to know too. Also is it cooler??

You should diversify a little and check out Nvidia and mine some ZEC.
I have a 1060 that gets 320+ sol/s at less than 100w

Any diff in power consumption?

I don't see this as a surprise. If the memory speeds aren't significantly different between a 570 and a 470, having a GPU that runs slightly faster isn't a win. I have Rx 480's and underclock them to get my Hash/Watt ratios up, and I'd just underclock a 570 the same way.

New miner waited for the rx570 will now bomb the coins , i think profitability will decrease alot after the release of this card, alot of new comers were waiting for this day to buy the fresh new 570 for best resell ...get ready

what about power usage , any difference ?

wow. it's nice and I'm considering this card to setup a new mini rig for mining.so I want to ask about the power . is this card using the the same power of RX470 or less? is it more quiet than RX470?

Is it a window problem or also on linux?

Yea, but what about signature check?

What memory have? Samsung? How much for gpu you paid? Did you try to overclock it?
About power consume?

Can't upload images   
Because i am
Online with iPhone

Thats just like the rx470(no bois mod) nothing changed , what's the hashrate on other algos , and also i heard it will be released in 18 april

Hexeditor.. 

Hash only 22mh/s, not modding because can't read bios
https://uphinhnhanh.com/images/2017/04/15/IMG_3301.jpg
https://uphinhnhanh.com/images/2017/04/15/IMG_3303.jpg
https://uphinhnhanh.com/images/2017/04/15/IMG_3302.jpg