Author

Topic: RX570s wont get abouve 23Megahash rate with bios (Read 122 times)

legendary
Activity: 1106
Merit: 1014
bump still neeed help
You'll have to provide the actual details about your rig if you want any help. Just because you followed some youtube tutorials doesn't mean anything, there's plenty of stuff that could result in low hashrates with Polaris cards.

Step 1: make sure you are using the right drivers.

Windows loves to swap drivers on you when you put in a new card.

yep none of these are the problem
Why are you so sure that it's not the problem? What drivers do you currently have installed?
newbie
Activity: 5
Merit: 0
bump still neeed help
newbie
Activity: 5
Merit: 0
Step 1: make sure you are using the right drivers.

Windows loves to swap drivers on you when you put in a new card.

yep none of these are the problem
newbie
Activity: 37
Merit: 0
Step 1: make sure you are using the right drivers.

Windows loves to swap drivers on you when you put in a new card.
newbie
Activity: 5
Merit: 0
Hey, i built a mining rig with 3 radeon sapphire rx 570 8 gb samsung memory. However, when i followed the bios mod tutorial on youtube and overclocking tutorial i was only getting around 23 mh per card. I am positive i did everything right because i watched every single video on you tube. Also for my clock rates, people had the memory clock around 2200 and gpu clock around 1100 but when i tried those clock rates i would'nt even get close to their hashrates. So i tweaked my clock rates to mem clock: 2250 and gpu clock:1450 but i only obtained a hashrate of 23 mh. some one please help cause I've done everything possible and i need additional help now. Also idsi it bad for my pgu if my clock rates are this high?
Jump to: