Topic: [S] 120mm 12VDC Fan - & other (Read 1219 times)
I've recently bought fans from this man, honest trader!
UPDATE @UP
Hello everyone.
120mm - 12VDC FAN
Simple, cheap jet very efficient PC fan. 120mm with RPM at about 3500 is ideal for pulling out the hot air from the cards and blowing in cool air on them. The fan comes with the set of 4 screw bolts for the chasis-fan mounting. The fan is connected via 4PIN molex connector to the PSU.
Price - 1.5 BTC - including shipping cost (worldwide)
Specification:
- 120mm
- RPM ~3500
- 12V DC 0.2A
- ~36dB
The fan in this specification (shown below - blowing in fresh air into the GPUs) cools down the cores for 5o if added second fan blowing out hot air - aditional 3-2o reduction. (the gpu fan speed is at 60 - 69%(for the first one) and 57 - 60 % for the second one - depends on the weather. (GPUs are set to 965@315, adn the GPU temps are 73 - 78 (for the first one), 70 - 75 degree (for the second one)
_______________________________________________________________________________ ___________________________________
Spacers - for Graphic cards
Price - 0.6 BTC (for a set of 2 spacers) including shipping cost (worldwide)
Specification.
- L:= 2 1/8" (55mm)
- D:= 3/8"(10mm) - 1/8"(4mm) (the fat one)
- D:= 2/8"(6mm) - 1/32"(1mm) (the thin one)
- Sharp "saw-type" edge preventing them from falling of.
Abailabale:
- 4 sets of BIG (2xfat spacer in each)
- 3 sets of MEDIUM (1x fat 1x thin)
Below a common use of spacers.
_______________________________________________________________________________ ___________________________________
Fan Mounting Clamps
(4pcs in set, with holes, and 4x screw bolts for fan mounting)
Mounting clamps with holes are ideal for mounting the fan in the "air" (pics below) or in any other way. They can easily joint two PSUs. The holes in the clamps are set for the standard fan screw bolts, and the hole spacing matches for different fan diameter.
Specification:
- Lenght total - 15 1/2" (395mm) - working lenght - 11 1/2" (290mm)
- D:- 3/8" (10mm)
- Hole spacing 5/16" (8mm)
Price per set (4 clamps in set)(including shipping cost)
1 - set - 0,7 BTC
10 - set -10% off = 6,3 BTC
20 - sets -20% off 11,2 BTC
Dummy plugs
Standard VGA dummy
0.4 btc each -with shipping cost
There is a option to buy dummy plug with DVI to VGA converter plug + 0,2 BTC (PM first)
ALL ITEMS ARE BRAND NEW
120mm - 12VDC FAN
Simple, cheap jet very efficient PC fan. 120mm with RPM at about 3500 is ideal for pulling out the hot air from the cards and blowing in cool air on them. The fan comes with the set of 4 screw bolts for the chasis-fan mounting. The fan is connected via 4PIN molex connector to the PSU.
Price - 1.5 BTC - including shipping cost (worldwide)
Specification:
- 120mm
- RPM ~3500
- 12V DC 0.2A
- ~36dB
  |
The fan in this specification (shown below - blowing in fresh air into the GPUs) cools down the cores for 5o if added second fan blowing out hot air - aditional 3-2o reduction. (the gpu fan speed is at 60 - 69%(for the first one) and 57 - 60 % for the second one - depends on the weather. (GPUs are set to 965@315, adn the GPU temps are 73 - 78 (for the first one), 70 - 75 degree (for the second one)
  |
 |
_______________________________________________________________________________ ___________________________________
Spacers - for Graphic cards
Price - 0.6 BTC (for a set of 2 spacers) including shipping cost (worldwide)
Specification.
- L:= 2 1/8" (55mm)
- D:= 3/8"(10mm) - 1/8"(4mm) (the fat one)
- D:= 2/8"(6mm) - 1/32"(1mm) (the thin one)
- Sharp "saw-type" edge preventing them from falling of.
Abailabale:
- 4 sets of BIG (2xfat spacer in each)
- 3 sets of MEDIUM (1x fat 1x thin)
   |
Below a common use of spacers.
|
_______________________________________________________________________________ ___________________________________
Fan Mounting Clamps
(4pcs in set, with holes, and 4x screw bolts for fan mounting)
Mounting clamps with holes are ideal for mounting the fan in the "air" (pics below) or in any other way. They can easily joint two PSUs. The holes in the clamps are set for the standard fan screw bolts, and the hole spacing matches for different fan diameter.
Specification:
- Lenght total - 15 1/2" (395mm) - working lenght - 11 1/2" (290mm)
- D:- 3/8" (10mm)
- Hole spacing 5/16" (8mm)
Price per set (4 clamps in set)(including shipping cost)
1 - set - 0,7 BTC
10 - set -10% off = 6,3 BTC
20 - sets -20% off 11,2 BTC
  |
   |
Dummy plugs
Standard VGA dummy
0.4 btc each -with shipping cost
There is a option to buy dummy plug with DVI to VGA converter plug + 0,2 BTC (PM first)
ALL ITEMS ARE BRAND NEW
Jump to: