when in doubt, reboot?
turned off PSU, switched and reseated PCI-E power inputs no miner and PSU. rebooted.
Steady 00000000 for both blades, hashing a ~180
another problem solved thanks to this epic forum
Topic: S1 Running Half-Speed - Powered by single CX750M (Read 1216 times)
running only high 80 Gh/s (looks like single blade is working)
running off a single CX750M with just the PCI-Es to run the single machine. power *should* not be an issue.
and... uh oh...
Chain# ASIC# Frequency Fan Temp ASIC status
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
second blade
oooooooo oooooooo oooooooo oooooooo
now what?! thanks
.
running off a single CX750M with just the PCI-Es to run the single machine. power *should* not be an issue.
and... uh oh...
Chain# ASIC# Frequency Fan Temp ASIC status
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
second blade
oooooooo oooooooo oooooooo oooooooo
now what?! thanks
.
What do you mean it is running 1/2 speed? It's only doing 220GH/s?
Look here and make sure you fed it power to both boards and not just one board:
https://bitcointalksearch.org/topic/feeding-the-antminer-s3-with-3-pci-e-cables-725161
Log into the miner and check and see if both boards are working under miner status tab, look down at the bottom right where it says ASIC Status - it should be all "o" and no "x"s.
Look here and make sure you fed it power to both boards and not just one board:
https://bitcointalksearch.org/topic/feeding-the-antminer-s3-with-3-pci-e-cables-725161
Log into the miner and check and see if both boards are working under miner status tab, look down at the bottom right where it says ASIC Status - it should be all "o" and no "x"s.
Power shouldn't be the problem.
Someone please walk me through, or point me to, easy troubleshooting?
thanks! and thanks to all that have suffered through my slow-mo questions. while not an idiot i'm apprehensive when it comes to computers. always worried i'll change something i then cannot un-break.
thanks!
Someone please walk me through, or point me to, easy troubleshooting?
thanks! and thanks to all that have suffered through my slow-mo questions. while not an idiot i'm apprehensive when it comes to computers. always worried i'll change something i then cannot un-break.
thanks!
Jump to: