rather than start a new thread I would just carry on this one, so i bought another board, was sold as a s17+ I planned to change firmware to s17pro, huge mistake on my part,
firstly on removing the old board, there were soldered wires on the back with one loose, so someone been modding it, but I digress, this new board boots fine, but will not flash any thing.
first starting doing a hard sd card flash, it just hangs with both light on, then I tried using the upgrade firmware on the miner, only to get to "cannot continue no signature" - NOTE, I used the official firmware from bitmain.
anyone know how to change a s17+ board into a s17 pro board?
Topic: s17 pro t17 logon issues (Read 200 times)
https://ibb.co/2K5GMHm
yeah, so it did take the s17pro firmware for some reason (did not change anything just tried it again), but cant get past this screen, so unless anyone got any tips then I am just gonna assume I bricked it.
yeah, so it did take the s17pro firmware for some reason (did not change anything just tried it again), but cant get past this screen, so unless anyone got any tips then I am just gonna assume I bricked it.
Download awesomeminer app and try to flash their firmware using the app, it might work.
https://ibb.co/2K5GMHm
yeah, so it did take the s17pro firmware for some reason (did not change anything just tried it again), but cant get past this screen, so unless anyone got any tips then I am just gonna assume I bricked it.
gonna order a few backup cards just in case
yeah, so it did take the s17pro firmware for some reason (did not change anything just tried it again), but cant get past this screen, so unless anyone got any tips then I am just gonna assume I bricked it.
gonna order a few backup cards just in case
do deffinatly a s17pro
https://ibb.co/HrkQphf
so went to bitmain and downloaded Antminer-S17Pro-user-OM-202004271325-sig_5837.tar.gz - does not work
tried Antminer-S17Pro-user-MD-201905241708-sig.tar.gz, same deal, tried another tf card just in case, no dice.
the t17 I got on there still gets stuck on login, root/root does not work, no error, just refreshes the page, even inputting jibberish does nothing.
is this system bricked? can I just buy a new board with firmware all ready installed? or a service I can ship mine to?
https://ibb.co/HrkQphf
so went to bitmain and downloaded Antminer-S17Pro-user-OM-202004271325-sig_5837.tar.gz - does not work
tried Antminer-S17Pro-user-MD-201905241708-sig.tar.gz, same deal, tried another tf card just in case, no dice.
the t17 I got on there still gets stuck on login, root/root does not work, no error, just refreshes the page, even inputting jibberish does nothing.
is this system bricked? can I just buy a new board with firmware all ready installed? or a service I can ship mine to?
buy a controller give me a minute for links.
https://vmssecuritycloud.com/product/antminer-s17-control-board-replacement/
the one above ⬆️ should be good I have done years of business with the guy above.
let him know I linked you.
noted thanks, gonna play around for a day or two first just to make sure I learnt what I did so I wont do it again haha
controllers are tricky and easy to brick.
if you have more then 5 t17s and s17s combined it is good to have 1 spare controller and a few spare fans.
do deffinatly a s17pro
https://ibb.co/HrkQphf
so went to bitmain and downloaded Antminer-S17Pro-user-OM-202004271325-sig_5837.tar.gz - does not work
tried Antminer-S17Pro-user-MD-201905241708-sig.tar.gz, same deal, tried another tf card just in case, no dice.
the t17 I got on there still gets stuck on login, root/root does not work, no error, just refreshes the page, even inputting jibberish does nothing.
is this system bricked? can I just buy a new board with firmware all ready installed? or a service I can ship mine to?
https://ibb.co/HrkQphf
so went to bitmain and downloaded Antminer-S17Pro-user-OM-202004271325-sig_5837.tar.gz - does not work
tried Antminer-S17Pro-user-MD-201905241708-sig.tar.gz, same deal, tried another tf card just in case, no dice.
the t17 I got on there still gets stuck on login, root/root does not work, no error, just refreshes the page, even inputting jibberish does nothing.
is this system bricked? can I just buy a new board with firmware all ready installed? or a service I can ship mine to?
buy a controller give me a minute for links.
https://vmssecuritycloud.com/product/antminer-s17-control-board-replacement/
the one above ⬆️ should be good I have done years of business with the guy above.
let him know I linked you.
noted thanks, gonna play around for a day or two first just to make sure I learnt what I did so I wont do it again haha
Are you sure you flashing it right? What size sdcard you have?Can you try Vnish firmware instead (awesomeminer of Asic.to)
Also try to reset the miner, unplug the power cable, press IP report button, keep it pressed while you power the miner, don't let go of the button for 10 seconds, release. Try to to login again.
well, I think so, I have been able to install t17 stuff ok, I have a 1gb one and a 4gb one, both been scanned for errors, I cant try Vnish as its not a standalone, I have to get the original firmware on then remove SHH before I can go anywhere near that or braiins os.
yeah, good shout but afraid I have tried all the reset things, I guess I broke it.
do deffinatly a s17pro
https://ibb.co/HrkQphf
so went to bitmain and downloaded Antminer-S17Pro-user-OM-202004271325-sig_5837.tar.gz - does not work
tried Antminer-S17Pro-user-MD-201905241708-sig.tar.gz, same deal, tried another tf card just in case, no dice.
the t17 I got on there still gets stuck on login, root/root does not work, no error, just refreshes the page, even inputting jibberish does nothing.
is this system bricked? can I just buy a new board with firmware all ready installed? or a service I can ship mine to?
https://ibb.co/HrkQphf
so went to bitmain and downloaded Antminer-S17Pro-user-OM-202004271325-sig_5837.tar.gz - does not work
tried Antminer-S17Pro-user-MD-201905241708-sig.tar.gz, same deal, tried another tf card just in case, no dice.
the t17 I got on there still gets stuck on login, root/root does not work, no error, just refreshes the page, even inputting jibberish does nothing.
is this system bricked? can I just buy a new board with firmware all ready installed? or a service I can ship mine to?
buy a controller give me a minute for links.
https://vmssecuritycloud.com/product/antminer-s17-control-board-replacement/
the one above ⬆️ should be good I have done years of business with the guy above.
let him know I linked you.
Are you sure you flashing it right? What size sdcard you have?Can you try Vnish firmware instead (awesomeminer of Asic.to)
Also try to reset the miner, unplug the power cable, press IP report button, keep it pressed while you power the miner, don't let go of the button for 10 seconds, release. Try to to login again.
do deffinatly a s17pro
https://ibb.co/HrkQphf
so went to bitmain and downloaded Antminer-S17Pro-user-OM-202004271325-sig_5837.tar.gz - does not work
tried Antminer-S17Pro-user-MD-201905241708-sig.tar.gz, same deal, tried another tf card just in case, no dice.
the t17 I got on there still gets stuck on login, root/root does not work, no error, just refreshes the page, even inputting jibberish does nothing.
is this system bricked? can I just buy a new board with firmware all ready installed? or a service I can ship mine to?
https://ibb.co/HrkQphf
so went to bitmain and downloaded Antminer-S17Pro-user-OM-202004271325-sig_5837.tar.gz - does not work
tried Antminer-S17Pro-user-MD-201905241708-sig.tar.gz, same deal, tried another tf card just in case, no dice.
the t17 I got on there still gets stuck on login, root/root does not work, no error, just refreshes the page, even inputting jibberish does nothing.
is this system bricked? can I just buy a new board with firmware all ready installed? or a service I can ship mine to?
pretty hard to follow what your problem is, but if I understand correctly, your main problem is that you don't know which miner model you actually have, and now there is a chance that you flashed the wrong firmware so whatever shows on the webpage could be inaccurate, one easy way to solve this would be to disable the gear and compare the hashboard to the other ones you have, all of these 17 series models differ in the chip count, so take one hashboard out and count the chips.
T17 has 30 chips / board
S17 pro has 48 chips / board
S17+ has 65 chips / board
S17e has 135 chips / board (ya 135 no typos)
So ya, figure out your miner type first then come back.
T17 has 30 chips / board
S17 pro has 48 chips / board
S17+ has 65 chips / board
S17e has 135 chips / board (ya 135 no typos)
So ya, figure out your miner type first then come back.
+this, thank you, back soon
pretty hard to follow what your problem is, but if I understand correctly, your main problem is that you don't know which miner model you actually have, and now there is a chance that you flashed the wrong firmware so whatever shows on the webpage could be inaccurate, one easy way to solve this would be to disable the gear and compare the hashboard to the other ones you have, all of these 17 series models differ in the chip count, so take one hashboard out and count the chips.
T17 has 30 chips / board
S17 pro has 48 chips / board
S17+ has 65 chips / board
S17e has 135 chips / board (ya 135 no typos)
So ya, figure out your miner type first then come back.
T17 has 30 chips / board
S17 pro has 48 chips / board
S17+ has 65 chips / board
S17e has 135 chips / board (ya 135 no typos)
So ya, figure out your miner type first then come back.
did you flash the controller or use an sdcard instead.
sd card, with I used balenaetcher.
did you flash the controller or use an sdcard instead.
hiya, got one of my miners having issues not sure what to do next.
I have a pool of both s17 pro's and t17's and I dont know which one it is, my end goal is I want braiins os on it, but as far as I know it has to have stock bitmain firmware on it? I downloaded a firmware for all s and t versions and it showed up as T17 on the main backend screen, so I downloaded the correct firmware direct from bitmain and I cant log on to backend, I get to the user and pass, but root/root just refreshes the page with no error message, I googled in the product number from the side of the machiene (stickers badly worn some missing) and it said it was a s17 pro, so I did try that firmware, same results, so I loaded back up this dodgy firmware again and tried to install braiins over that as root/root worked, and I just get "this miner is not supported" fans at 100% through all the flashed and firmware changes.
how do I get this miner stock again? any ideas, short of buying another mainboard ready flashed?
I have a pool of both s17 pro's and t17's and I dont know which one it is, my end goal is I want braiins os on it, but as far as I know it has to have stock bitmain firmware on it? I downloaded a firmware for all s and t versions and it showed up as T17 on the main backend screen, so I downloaded the correct firmware direct from bitmain and I cant log on to backend, I get to the user and pass, but root/root just refreshes the page with no error message, I googled in the product number from the side of the machiene (stickers badly worn some missing) and it said it was a s17 pro, so I did try that firmware, same results, so I loaded back up this dodgy firmware again and tried to install braiins over that as root/root worked, and I just get "this miner is not supported" fans at 100% through all the flashed and firmware changes.
how do I get this miner stock again? any ideas, short of buying another mainboard ready flashed?
did all units work?
how many units are there.
if you have under ten pieces this is easy enough.
if you have 50 or 60 pieces it will be harder to track it all down.
yeah sorry I was not clear, this is just one unit I had on my shelf and just got round to looking at it, I installed hiveos on it (this was my main for all units) I am now moving over to braiins os and was trying it on this spare system, all my other units are running fine on hive, but I am worried that if I try and revert them back it will brick the system, so for clarity, I am just having issues with this one for now.
hiya, got one of my miners having issues not sure what to do next.
I have a pool of both s17 pro's and t17's and I dont know which one it is, my end goal is I want braiins os on it, but as far as I know it has to have stock bitmain firmware on it? I downloaded a firmware for all s and t versions and it showed up as T17 on the main backend screen, so I downloaded the correct firmware direct from bitmain and I cant log on to backend, I get to the user and pass, but root/root just refreshes the page with no error message, I googled in the product number from the side of the machiene (stickers badly worn some missing) and it said it was a s17 pro, so I did try that firmware, same results, so I loaded back up this dodgy firmware again and tried to install braiins over that as root/root worked, and I just get "this miner is not supported" fans at 100% through all the flashed and firmware changes.
how do I get this miner stock again? any ideas, short of buying another mainboard ready flashed?
I have a pool of both s17 pro's and t17's and I dont know which one it is, my end goal is I want braiins os on it, but as far as I know it has to have stock bitmain firmware on it? I downloaded a firmware for all s and t versions and it showed up as T17 on the main backend screen, so I downloaded the correct firmware direct from bitmain and I cant log on to backend, I get to the user and pass, but root/root just refreshes the page with no error message, I googled in the product number from the side of the machiene (stickers badly worn some missing) and it said it was a s17 pro, so I did try that firmware, same results, so I loaded back up this dodgy firmware again and tried to install braiins over that as root/root worked, and I just get "this miner is not supported" fans at 100% through all the flashed and firmware changes.
how do I get this miner stock again? any ideas, short of buying another mainboard ready flashed?
did all units work?
how many units are there.
if you have under ten pieces this is easy enough.
if you have 50 or 60 pieces it will be harder to track it all down.
hiya, got one of my miners having issues not sure what to do next.
I have a pool of both s17 pro's and t17's and I dont know which one it is, my end goal is I want braiins os on it, but as far as I know it has to have stock bitmain firmware on it? I downloaded a firmware for all s and t versions and it showed up as T17 on the main backend screen, so I downloaded the correct firmware direct from bitmain and I cant log on to backend, I get to the user and pass, but root/root just refreshes the page with no error message, I googled in the product number from the side of the machiene (stickers badly worn some missing) and it said it was a s17 pro, so I did try that firmware, same results, so I loaded back up this dodgy firmware again and tried to install braiins over that as root/root worked, and I just get "this miner is not supported" fans at 100% through all the flashed and firmware changes.
how do I get this miner stock again? any ideas, short of buying another mainboard ready flashed?
I have a pool of both s17 pro's and t17's and I dont know which one it is, my end goal is I want braiins os on it, but as far as I know it has to have stock bitmain firmware on it? I downloaded a firmware for all s and t versions and it showed up as T17 on the main backend screen, so I downloaded the correct firmware direct from bitmain and I cant log on to backend, I get to the user and pass, but root/root just refreshes the page with no error message, I googled in the product number from the side of the machiene (stickers badly worn some missing) and it said it was a s17 pro, so I did try that firmware, same results, so I loaded back up this dodgy firmware again and tried to install braiins over that as root/root worked, and I just get "this miner is not supported" fans at 100% through all the flashed and firmware changes.
how do I get this miner stock again? any ideas, short of buying another mainboard ready flashed?
Jump to: