Author

Topic: S17pro (Read 131 times)

legendary
Activity: 4354
Merit: 9201
'The right to privacy matters'
January 10, 2025, 11:50:07 PM
#6
It was bad PSU.
I use one from T17, its not 100% compatible but its working.

thank you for your followup. I figured it was the psu.
copper member
Activity: 39
Merit: 0
Crypto Center Founder
December 16, 2024, 02:13:17 PM
#5
It is bad PSU for 90%. Go replace it. You can use also old one. This is old miner Smiley.
FYO: this line says it exactly:
2023-01-22T09:53:41.251828Z ERROR bosminer_backend::miner: CHAIN/1: Start failed: Other(SHORT CIRCUIT - measured voltage 0.26 V) --

So for other guys. When you see this than CHANGE PSU
newbie
Activity: 43
Merit: 0
December 14, 2024, 07:27:17 AM
#4
It was bad PSU.
I use one from T17, its not 100% compatible but its working.
legendary
Activity: 4354
Merit: 9201
'The right to privacy matters'
December 12, 2024, 08:22:13 AM
#3
Is problem with PSU or hasboards?
2023-01-22T09:53:39.906480Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/1: Waiting for voltage to settle (measured 0.26 V, expected 21.00 V)
2023-01-22T09:53:39.906569Z ERROR bosminer_backend::hashchain: CHAIN/1: Init failed: SHORT CIRCUIT - measured voltage 0.26 V
2023-01-22T09:53:40.042441Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/2: Waiting for voltage to settle (measured 0.25 V, expected 21.00 V)
2023-01-22T09:53:40.042509Z ERROR bosminer_backend::hashchain: CHAIN/2: Init failed: SHORT CIRCUIT - measured voltage 0.25 V
2023-01-22T09:53:40.104880Z  INFO bosminer_backend::hashchain: CHAIN/3: Fans OK
2023-01-22T09:53:40.107214Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/1: Disable voltage
2023-01-22T09:53:40.236883Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/3: Waiting for voltage to settle (measured 0.26 V, expected 21.00 V)
2023-01-22T09:53:40.236970Z ERROR bosminer_backend::hashchain: CHAIN/3: Init failed: SHORT CIRCUIT - measured voltage 0.26 V
2023-01-22T09:53:40.243826Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/2: Disable voltage
2023-01-22T09:53:40.438399Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/3: Disable voltage
2023-01-22T09:53:41.251828Z ERROR bosminer_backend::miner: CHAIN/1: Start failed: Other(SHORT CIRCUIT - measured voltage 0.26 V)
2023-01-22T09:53:41.355205Z ERROR bosminer_backend::miner: CHAIN/2: Start failed: Other(SHORT CIRCUIT - measured voltage 0.25 V)
2023-01-22T09:53:41.540474Z ERROR bosminer_backend::miner: CHAIN/3: Start failed: Other(SHORT CIRCUIT - measured voltage 0.26 V)

my guess is psu where are you located? I am in New Jesery USA

 I have a working s17 psu. Swapping out the psu is where I would start to trouble shoot it.

this guy on ebay is in Canada

https://www.ebay.com/itm/114861660423?

I do not know him but if you are in Canada or USA it is fairly low cost price.
member
Activity: 259
Merit: 85
So many numbers and so little time
December 12, 2024, 08:06:46 AM
#2
Could be either.

I'd start debug by power off, pulling all hash boards, power on and measure the supply with a DVM. That'll confirm if the PSU is dead.

Then if the supply is present, add one hash board at a time back into the unit until you find which boards are still operational.
newbie
Activity: 43
Merit: 0
December 11, 2024, 01:08:52 PM
#1
Is problem with PSU or hasboards?

2023-01-22T09:53:39.906480Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/1: Waiting for voltage to settle (measured 0.26 V, expected 21.00 V)
2023-01-22T09:53:39.906569Z ERROR bosminer_backend::hashchain: CHAIN/1: Init failed: SHORT CIRCUIT - measured voltage 0.26 V
2023-01-22T09:53:40.042441Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/2: Waiting for voltage to settle (measured 0.25 V, expected 21.00 V)
2023-01-22T09:53:40.042509Z ERROR bosminer_backend::hashchain: CHAIN/2: Init failed: SHORT CIRCUIT - measured voltage 0.25 V
2023-01-22T09:53:40.104880Z  INFO bosminer_backend::hashchain: CHAIN/3: Fans OK
2023-01-22T09:53:40.107214Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/1: Disable voltage
2023-01-22T09:53:40.236883Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/3: Waiting for voltage to settle (measured 0.26 V, expected 21.00 V)
2023-01-22T09:53:40.236970Z ERROR bosminer_backend::hashchain: CHAIN/3: Init failed: SHORT CIRCUIT - measured voltage 0.26 V
2023-01-22T09:53:40.243826Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/2: Disable voltage
2023-01-22T09:53:40.438399Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/3: Disable voltage
2023-01-22T09:53:41.251828Z ERROR bosminer_backend::miner: CHAIN/1: Start failed: Other(SHORT CIRCUIT - measured voltage 0.26 V)
2023-01-22T09:53:41.355205Z ERROR bosminer_backend::miner: CHAIN/2: Start failed: Other(SHORT CIRCUIT - measured voltage 0.25 V)
2023-01-22T09:53:41.540474Z ERROR bosminer_backend::miner: CHAIN/3: Start failed: Other(SHORT CIRCUIT - measured voltage 0.26 V)
Jump to: