Mine in a proper good pool, that's the lesson here
so true
Topic: S19 Hashboard 2 and 3 not working (Read 111 times)
so true
Mine in a proper good pool, that's the lesson here
So here's a strange thing.
I flashed the firmware via SD and it didnt work. I just about given up and had a repair ticket open for bitmain to ship back the antminer for repairs.
However I remember someone stating back sometime that s19's have had known issues with mining on nicehash.
I decided to open an account on f2pool and give it a shot and sure enough, its working.
All 3 hashboards are online and mining away at the full 90THs.
Curious to know if anyone has had the same result?
I flashed the firmware via SD and it didnt work. I just about given up and had a repair ticket open for bitmain to ship back the antminer for repairs.
However I remember someone stating back sometime that s19's have had known issues with mining on nicehash.
I decided to open an account on f2pool and give it a shot and sure enough, its working.
All 3 hashboards are online and mining away at the full 90THs.
Curious to know if anyone has had the same result?
I'm not so familiar with s19 kernel logs but it seems the kernel logs are not complete?
Can you copy the kernel logs again and paste them to pastebin.com and post the URL here?
I don't see much error or failure from your log have you tried to flash it through SD card flashing?
Since you already tried to flash it through WebGUI then try to flash it with an SD card you can find the guide from this link below
- https://support.bitmain.com/hc/en-us/articles/900003100743-S19-S19-Pro-control-board-program-recovery-SD-card-flashing-
Then test it again if it still doesn't work post the complete kernel logs again here make sure you paste the whole kernel logs or use pastebin.com
Can you copy the kernel logs again and paste them to pastebin.com and post the URL here?
I don't see much error or failure from your log have you tried to flash it through SD card flashing?
Since you already tried to flash it through WebGUI then try to flash it with an SD card you can find the guide from this link below
- https://support.bitmain.com/hc/en-us/articles/900003100743-S19-S19-Pro-control-board-program-recovery-SD-card-flashing-
Then test it again if it still doesn't work post the complete kernel logs again here make sure you paste the whole kernel logs or use pastebin.com
Any help or direction would be very much appreciated.
Picked up a new s19 and upon starting it up, came across a few problems.
Notably got an abnormal hash rate on the dashboard.
Noticed that hash board 2 and 3 were not working and hash board 1 was mining very low (below 100Ghz).
Did a few troubleshooting steps, rebooted several times, changed PDU (on 240v 30a), updated the firmware via web ui, reset to factory, reseated plugs/cables from control board to hash boards.
Have a ticket opened with bitmain but they have not been much help.
I do see in the log that “trace_printk()” was showing. Question is if this is the problem, how would I get around the debug kernel?
Appreciate any help. thanks in advance!
Picked up a new s19 and upon starting it up, came across a few problems.
Notably got an abnormal hash rate on the dashboard.
Noticed that hash board 2 and 3 were not working and hash board 1 was mining very low (below 100Ghz).
Did a few troubleshooting steps, rebooted several times, changed PDU (on 240v 30a), updated the firmware via web ui, reset to factory, reseated plugs/cables from control board to hash boards.
Have a ticket opened with bitmain but they have not been much help.
I do see in the log that “trace_printk()” was showing. Question is if this is the problem, how would I get around the debug kernel?
Appreciate any help. thanks in advance!
Code:
[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Wed Oct 20 18:57:17 CST 2021
[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[ 0.000000@0] bootconsole [aml_uart0] enabled
[ 0.000000@0] efi: Getting EFI parameters from FDT:
[ 0.000000@0] efi: UEFI not found.
[ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000@0] __reserved_mem_alloc_size, start:0x000000003e000000, end:0x0000000040000000, len:32 MiB
[ 0.000000@0] failed to allocate memory for node linux,meson-fb, size:32 MB
[ 0.000000@0] cma: Reserved 8 MiB at 0x000000000f800000
[ 0.000000@0] On node 0 totalpages: 65536
[ 0.000000@0] DMA zone: 1024 pages used for memmap
[ 0.000000@0] DMA zone: 0 pages reserved
[ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00f753000 s64536 r8192 d29672 u102400
[ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000@0] Detected VIPT I-cache on CPU0
[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs init=/sbin/init
[ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000@0] Memory: 219920K/262144K available (8764K kernel code, 1194K rwdata, 2428K rodata, 3648K init, 1018K bss, 29936K reserved, 12288K cma-reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB)
[ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB)
[ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB)
[ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB)
[ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139534 ( 1019 KB)
[ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB)
[ 0.000000@0] can't find symbol:arm_dma_alloc
[ 0.000000@0] can't find symbol:__alloc_from_contiguous
[ 0.000000@0] can't find symbol:cma_allocator_alloc
[ 0.000000@0] 0, addr:ffffff800971cff0 + 140, aml_cma_alloc_post_hook
[ 0.000000@0] 1, addr:ffffff800951f258 + 78, dma_alloc_from_contiguous
[ 0.000000@0] 2, addr:ffffff80091fdd50 + 388, cma_alloc
[ 0.000000@0] 3, addr:ffffff80091f76c8 + 2d0, __kmalloc_track_caller
[ 0.000000@0] 4, addr:ffffff80091f4a70 + 2d0, __kmalloc
[ 0.000000@0] 5, addr:ffffff80091f4750 + 258, kmem_cache_alloc_trace
[ 0.000000@0] 6, addr:ffffff80091f4500 + 250, kmem_cache_alloc
[ 0.000000@0] 7, addr:ffffff80091f4490 + 70, __slab_alloc.isra.24.constprop.28
[ 0.000000@0] 8, addr:ffffff80091f4108 + 388, ___slab_alloc.constprop.29
[ 0.000000@0] 9, addr:ffffff80091f1e70 + 420, new_slab
[ 0.000000@0] 10, addr:ffffff80091e52f8 + b0, vzalloc
[ 0.000000@0] 11, addr:ffffff80091e5248 + b0, vmalloc
[ 0.000000@0] 12, addr:ffffff80091e4b00 + 2e0, __vmalloc_node_range
[ 0.000000@0] 13, addr:ffffff80091ca410 + 110, kmalloc_order_trace
[ 0.000000@0] 14, addr:ffffff80091ca2a0 + 170, kmalloc_order
[ 0.000000@0] 15, addr:ffffff80091ab5a8 + 168, __alloc_page_frag
[ 0.000000@0] 16, addr:ffffff80091ab540 + 68, alloc_pages_exact
[ 0.000000@0] 17, addr:ffffff80091ab510 + 30, get_zeroed_page
[ 0.000000@0] 18, addr:ffffff80091ab4b8 + 58, __get_free_pages
[ 0.000000@0] 19, addr:ffffff80091aa800 + cb8, __alloc_pages_nodemask
[ 0.000000@0] 20, addr:ffffff800909c6e8 + 2a8, __dma_alloc
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000@0]
[ 0.000000@0] **********************************************************
[ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000@0] ** **
[ 0.000000@0] ** trace_printk() being used. Allocating extra memory. **
[ 0.000000@0] ** **
[ 0.000000@0] ** This means that this is a DEBUG kernel and it is **
[ 0.000000@0] ** unsafe for production use. **
[ 0.000000@0] ** **
[ 0.000000@0] ** If you see this message and you are not debugging **
[ 0.000000@0] ** the kernel, report this immediately to your vendor! **
[ 0.000000@0] ** **
[ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000@0] **********************************************************
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000@0] axg_aoclkc_init: register ao clk ok!
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_media: register meson media clk
[ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[ 0.000000@0] axg_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[ 0.016912@0] Console: colour dummy device 80x25
[ 0.021110@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.031586@0] pid_max: default: 32768 minimum: 301
[ 0.036442@0] thread_stack_cache_init, vmap:ffffffc00edaf600, bitmap:ffffffc00eda3000, cache page:ede0
[ 0.045772@0] thread_stack_cache_init, allocation vm area:ffffffc00edd94c0, addr:ffffff8020000000, size:20001000
[ 0.056005@0] cpu 0, vmap_stack:[ffffffc00f75c960-ffffffc00f760950]
[ 0.062304@0] cpu 0, irq_stack: [ffffffc00f753060-ffffffc00f757050]
[ 0.068604@0] cpu 1, vmap_stack:[ffffffc00f775960-ffffffc00f779950]
[ 0.074903@0] cpu 1, irq_stack: [ffffffc00f76c060-ffffffc00f770050]
[ 0.081203@0] cpu 2, vmap_stack:[ffffffc00f78e960-ffffffc00f792950]
[ 0.087503@0] cpu 2, irq_stack: [ffffffc00f785060-ffffffc00f789050]
[ 0.093804@0] cpu 3, vmap_stack:[ffffffc00f7a7960-ffffffc00f7ab950]
[ 0.100103@0] cpu 3, irq_stack: [ffffffc00f79e060-ffffffc00f7a2050]
[ 0.106466@0] Security Framework initialized
[ 0.110696@0] SELinux: Initializing.
[ 0.114388@0] SELinux: Starting in permissive mode
[ 0.114428@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.121108@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.128870@0] ftrace: allocating 30089 entries in 118 pages
[ 0.184563@0] sched-energy: CPU device node has no sched-energy-costs
[ 0.185379@0] CPU0: update cpu_capacity 1024
[ 0.189706@0] ASID allocator initialised with 32768 entries
[ 0.227690@0] secmon: can't fine clear_range
[ 0.227901@0] EFI services will not be available.
[ 0.231174@0] Meson chip version = RevC (25:C - 23:0)
[ 0.265037@1] Detected VIPT I-cache on CPU1
[ 0.265097@1] CPU1: update cpu_capacity 1024
[ 0.265099@1] CPU1: Booted secondary processor [410fd034]
[ 0.293112@2] Detected VIPT I-cache on CPU2
[ 0.293168@2] CPU2: update cpu_capacity 1024
[ 0.293170@2] CPU2: Booted secondary processor [410fd034]
[ 0.321163@3] Detected VIPT I-cache on CPU3
[ 0.321215@3] CPU3: update cpu_capacity 1024
[ 0.321218@3] CPU3: Booted secondary processor [410fd034]
[ 0.321308@0] Brought up 4 CPUs
[ 0.360526@0] SMP: Total of 4 processors activated.
[ 0.365435@0] CPU features: detected feature: 32-bit EL0 Support
[ 0.371471@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.382038@0] CPU: All CPU(s) started at EL2
[ 0.383212@0] alternatives: patching kernel code
[ 0.388532@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[ 0.395741@0] devtmpfs: initialized
[ 0.411216@0] DMI not present or invalid.
[ 0.411574@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.419597@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.426159@0] pinctrl core: initialized pinctrl subsystem
[ 0.432584@0] NET: Registered protocol family 16
[ 0.452104@0] cpuidle: using governor menu
[ 0.452612@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[ 0.458223@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[ 0.465633@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.471798@0] clkmsr: clkmsr: driver init
[ 0.475829@0] aml_watch_point_probe, in, wp:2
[ 0.481281@0] pstore: using zlib compression
[ 0.484754@0] console [pstore-1] enabled
[ 0.488093@0] pstore: Registered ramoops as persistent store backend
[ 0.494506@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.508880@0] aml_iomap: amlogic iomap probe done
[ 0.515820@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[ 0.517753@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[ 0.614386@0] usbcore: registered new interface driver usbfs
[ 0.614550@0] usbcore: registered new interface driver hub
[ 0.620184@0] usbcore: registered new device driver usb
[ 0.625504@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.630403@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.639802@0] PTP clock support registered
[ 0.644159@0] dmi: Firmware registration failed.
[ 0.652935@0] secmon: reserve_mem_size:0x300000
[ 0.653108@0] secmon secmon: assigned reserved memory node linux,secmon
[ 0.660120@0] secmon: get page:ffffffbf00140000, 5000
[ 0.664768@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[ 0.673152@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.681073@0] NetLabel: Initializing
[ 0.683202@0] NetLabel: domain hash size = 128
[ 0.687789@0] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.693039@0] NetLabel: unlabeled traffic allowed by default
[ 0.699656@0] clocksource: Switched to clocksource arch_sys_counter
[ 0.829002@0] VFS: Disk quotas dquot_6.6.0
[ 0.829150@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.856106@0] NET: Registered protocol family 2
[ 0.857174@0] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.862383@0] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.869018@0] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.875620@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.881568@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.888324@0] NET: Registered protocol family 1
[ 0.893283@0] RPC: Registered named UNIX socket transport module.
[ 0.898701@0] RPC: Registered udp transport module.
[ 0.903579@0] RPC: Registered tcp transport module.
[ 0.908478@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.917707@0] Unpacking initramfs...
[ 1.418126@2] Initramfs unpacking failed: junk in compressed archive
[ 1.424970@2] Freeing initrd memory: 6536K
[ 1.425882@2] hw perfevents: clusterb_enabled = 0
[ 1.428198@2] hw perfevents: cpumasks 0xf, 0x0
[ 1.432679@2] hw perfevents: cluster A irq = 7
[ 1.437243@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.447449@2] audit: initializing netlink subsys (disabled)
[ 1.450808@2] audit: type=2000 audit(1.264:1): initialized
[ 1.458093@2] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[ 1.482954@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.486036@2] NFS: Registering the id_resolver key type
[ 1.488693@2] Key type id_resolver registered
[ 1.492996@2] Key type id_legacy registered
[ 1.497656@2] fuse init (API version 7.26)
[ 1.503076@2] SELinux: Registering netfilter hooks
[ 1.509365@2] NET: Registered protocol family 38
[ 1.509427@2] Key type asymmetric registered
[ 1.512666@2] Asymmetric key parser 'x509' registered
[ 1.518177@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.525364@2] io scheduler noop registered (default)
[ 1.530340@2] io scheduler deadline registered
[ 1.535211@2] io scheduler cfq registered
[ 1.556498@3] random: fast init done
[ 1.556598@3] random: crng init done
[ 1.557069@2] Unable to detect cache hierarchy for CPU 0
[ 1.589925@2] loop: module loaded
[ 1.595511@2] zram: Added device: zram0
[ 1.595957@2] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.600979@2] libphy: Fixed MDIO Bus: probed
[ 1.605460@2] tun: Universal TUN/TAP device driver, 1.6
[ 1.609931@2] tun: (C) 1999-2004 Max Krasnyansky
[ 1.618105@2] ee eth reset:Addr = ffffff80081fd008
[ 1.625647@2] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 1.627575@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 1.632849@2] Ring mode enabled
[ 1.636082@2] DMA HW capability register supported
[ 1.640795@2] Normal descriptors
[ 1.644128@2] RX Checksum Offload Engine supported
[ 1.649019@2] COE Type 2
[ 1.651627@2] TX Checksum insertion supported
[ 1.656109@2] Wake-Up On Lan supported
[ 1.660059@2] Enable RX Mitigation via HW Watchdog Timer
[ 1.673725@2] libphy: stmmac: probed
[ 1.673777@2] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
[ 1.680309@2] PPP generic driver version 2.4.2
[ 1.683187@2] PPP BSD Compression module registered
[ 1.687714@2] PPP Deflate Compression module registered
[ 1.692972@2] PPP MPPE Compression module registered
[ 1.697928@2] NET: Registered protocol family 24
[ 1.703426@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.709324@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.716380@2] usbcore: registered new interface driver cdc_acm
[ 1.721569@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.730022@2] usbcore: registered new interface driver usbserial
[ 1.736734@3] mousedev: PS/2 mouse device common for all mice
[ 1.742157@3] usbcore: registered new interface driver xpad
[ 1.747555@2] i2c /dev entries driver
[ 1.752356@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 1.756557@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 1.767473@2] ff803000.serial: clock gate not found
[ 1.769099@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[ 1.776254@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[ 1.791186@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 1.793896@2] console [ttyS0] enabled
[ 1.801106@2] bootconsole [aml_uart0] disabled
[ 1.810829@1] ff804000.serial: clock gate not found
[ 1.814909@1] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[ 1.822014@1] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 1.832384@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[ 1.838510@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 1.848715@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[ 1.854980@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[ 1.865967@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[ 1.875249@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[ 1.881721@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[ 1.896816@0] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.900557@0] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.912974@0] aml_dma ff63e000.aml_dma: Aml dma
[ 1.916070@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[ 1.921038@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 1.927438@0] efusekeynum: 4
[ 1.929772@0] efusekeyname: mac offset: 0 size: 6
[ 1.936168@0] efusekeyname: mac_bt offset: 6 size: 6
[ 1.942571@0] efusekeyname: mac_wifi offset: 12 size: 6
[ 1.948987@0] efusekeyname: usid offset: 18 size: 16
[ 1.955895@3] efuse efuse: probe OK!
[ 1.961771@3] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 1.968546@0] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode
[ 1.973621@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 1.978803@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[ 2.023699@0] meson-mmc: meson_mmc_probe() : success!
[ 2.023980@0] amlogic mtd driver init
[ 2.028024@0] prase_get_dtb_nand_parameter:128,parse dts start
[ 2.032766@0] bl mode descrete
[ 2.035625@0] fip_copies 4
[ 2.038332@0] fip_size 0x200000
[ 2.041450@0] nand_clk_ctrl 0xffe07000
[ 2.045173@0] prase_get_dtb_nand_parameter:234,parse dts end
[ 2.050841@0] nand_clk_ctrl 0xffe07000
[ 2.054564@0] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[ 2.063309@0] plat->aml_nand_device ffffff800a005a90
[ 2.067470@0] m3_nand_probe() aml_nand_device ffffff800a005a90
[ 2.073587@0] NAND device id: 2c da 90 95 6 0
[ 2.077613@0] NAND device: Manufacturer ID:
[ 2.081668@0] 0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[ 2.088709@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.094142@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.099690@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.105935@0] mtd->oobavail: 0x8
[ 2.109365@0] aml_nand_init 2119: plat-name:bootloader
[ 2.114257@0] Creating 1 MTD partitions on "bootloader":
[ 2.119542@0] 0x000000000000-0x000000200000 : "bootloader"
[ 2.128311@1] bootloader initialized ok
[ 2.128802@1] plat->aml_nand_device ffffff800a005a90
[ 2.133795@1] m3_nand_probe() aml_nand_device ffffff800a005a90
[ 2.139960@1] NAND device id: 2c da 90 95 6 0
[ 2.143900@1] NAND device: Manufacturer ID:
[ 2.147967@1] 0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[ 2.155009@1] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.160446@1] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.166003@1] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.172235@1] mtd->oobavail: 0x8
[ 2.175748@1] aml_nand_init 2119: plat-name:nandnormal
[ 2.180589@1] bbt_start=20
[ 2.183216@1] env_start=24
[ 2.185924@1] key_start=32
[ 2.188606@1] dtb_start=40
[ 2.191276@1] ddr_start=44
[ 2.193983@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[ 2.200475@1] get_free_node 43: bitmap=0
[ 2.203951@1] get_free_node 55: bitmap=1
[ 2.208042@1] get_free_node 43: bitmap=1
[ 2.211749@1] get_free_node 55: bitmap=3
[ 2.215841@1] get_free_node 43: bitmap=3
[ 2.219531@1] get_free_node 55: bitmap=7
[ 2.223450@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[ 2.230120@1] nbbt free list:
[ 2.233067@1] blockN=21, ec=-1, dirty_flag=0
[ 2.237313@1] blockN=22, ec=-1, dirty_flag=0
[ 2.241558@1] blockN=23, ec=-1, dirty_flag=0
[ 2.245808@1] aml_nand_scan_rsv_info 1141: page_num=1
[ 2.251219@1] nbbt valid addr: 280000
[ 2.254477@1] aml_nand_bbt_check 1306 bbt is valid, reading.
[ 2.260109@1] aml_nand_read_rsv_info:423,read nbbt info at 280000
[ 2.266370@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[ 2.272799@1] get_free_node 43: bitmap=7
[ 2.276315@1] get_free_node 55: bitmap=f
[ 2.280407@1] get_free_node 43: bitmap=f
[ 2.284115@1] get_free_node 55: bitmap=1f
[ 2.288294@1] get_free_node 43: bitmap=1f
[ 2.292089@1] get_free_node 55: bitmap=3f
[ 2.296268@1] get_free_node 43: bitmap=3f
[ 2.300062@1] get_free_node 55: bitmap=7f
[ 2.304241@1] get_free_node 43: bitmap=7f
[ 2.308035@1] get_free_node 55: bitmap=ff
[ 2.312214@1] get_free_node 43: bitmap=ff
[ 2.316008@1] get_free_node 55: bitmap=1ff
[ 2.320274@1] get_free_node 43: bitmap=1ff
[ 2.324155@1] get_free_node 55: bitmap=3ff
[ 2.328228@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[ 2.334899@1] nenv free list:
[ 2.337847@1] blockN=25, ec=-1, dirty_flag=0
[ 2.342093@1] blockN=26, ec=-1, dirty_flag=0
[ 2.346340@1] blockN=27, ec=-1, dirty_flag=0
[ 2.350587@1] blockN=28, ec=-1, dirty_flag=0
[ 2.354833@1] blockN=29, ec=-1, dirty_flag=0
[ 2.359080@1] blockN=30, ec=-1, dirty_flag=0
[ 2.363326@1] blockN=31, ec=-1, dirty_flag=0
[ 2.367573@1] aml_nand_scan_rsv_info 1141: page_num=32
[ 2.384905@1] nenv valid addr: 310000
[ 2.384940@1] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[ 2.389297@1] get_free_node 43: bitmap=3ff
[ 2.393177@1] get_free_node 55: bitmap=7ff
[ 2.397442@1] get_free_node 43: bitmap=7ff
[ 2.401323@1] get_free_node 55: bitmap=fff
[ 2.405589@1] get_free_node 43: bitmap=fff
[ 2.409470@1] get_free_node 55: bitmap=1fff
[ 2.413822@1] get_free_node 43: bitmap=1fff
[ 2.417790@1] get_free_node 55: bitmap=3fff
[ 2.422142@1] get_free_node 43: bitmap=3fff
[ 2.426110@1] get_free_node 55: bitmap=7fff
[ 2.430462@1] get_free_node 43: bitmap=7fff
[ 2.434430@1] get_free_node 55: bitmap=ffff
[ 2.438780@1] get_free_node 43: bitmap=ffff
[ 2.442750@1] get_free_node 55: bitmap=1ffff
[ 2.447189@1] get_free_node 43: bitmap=1ffff
[ 2.451243@1] get_free_node 55: bitmap=3ffff
[ 2.455490@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.462160@1] nkey free list:
[ 2.465107@1] blockN=32, ec=-1, dirty_flag=0
[ 2.469354@1] blockN=33, ec=-1, dirty_flag=0
[ 2.473601@1] blockN=34, ec=-1, dirty_flag=0
[ 2.477848@1] blockN=35, ec=-1, dirty_flag=0
[ 2.482094@1] blockN=36, ec=-1, dirty_flag=0
[ 2.486341@1] blockN=37, ec=-1, dirty_flag=0
[ 2.490587@1] blockN=38, ec=-1, dirty_flag=0
[ 2.494834@1] blockN=39, ec=-1, dirty_flag=0
[ 2.499082@1] aml_nand_scan_rsv_info 1141: page_num=16
[ 2.504193@1] nkey valid addr: fffffffffffe0000
[ 2.508702@1] aml_nand_key_check 1251 NO key exist
[ 2.513470@1] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[ 2.520094@1] get_free_node 43: bitmap=3ffff
[ 2.523956@1] get_free_node 55: bitmap=7ffff
[ 2.528395@1] get_free_node 43: bitmap=7ffff
[ 2.532450@1] get_free_node 55: bitmap=fffff
[ 2.536888@1] get_free_node 43: bitmap=fffff
[ 2.540943@1] get_free_node 55: bitmap=1fffff
[ 2.545276@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[ 2.551947@1] ndtb free list:
[ 2.554878@1] blockN=41, ec=-1, dirty_flag=0
[ 2.559141@1] blockN=42, ec=-1, dirty_flag=0
[ 2.563388@1] blockN=43, ec=-1, dirty_flag=0
[ 2.567649@1] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.584985@1] ndtb valid addr: 500000
[ 2.585018@1] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[ 2.589470@1] get_free_node 43: bitmap=1fffff
[ 2.593611@1] get_free_node 55: bitmap=3fffff
[ 2.598137@1] get_free_node 43: bitmap=3fffff
[ 2.602277@1] get_free_node 55: bitmap=7fffff
[ 2.606610@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.613281@1] nddr free list:
[ 2.616228@1] blockN=44, ec=-1, dirty_flag=0
[ 2.620475@1] blockN=45, ec=-1, dirty_flag=0
[ 2.624722@1] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.629835@1] nddr valid addr: fffffffffffe0000
[ 2.634342@1] aml_nand_ddr_check 1281 NO ddr exist
[ 2.639112@1] tpl: off 8388608, size 8388608
[ 2.704123@1] NAND bbt detect factory Bad block at 7fe0000
[ 2.704173@1] aml_nand_add_partition:394 factory bad addr=3ff
[ 2.779283@1] Creating 6 MTD partitions on "nandnormal":
[ 2.779331@1] 0x000000800000-0x000001000000 : "tpl"
[ 2.790939@3] 0x000001000000-0x000001200000 : "misc"
[ 2.794194@1] 0x000001200000-0x000002200000 : "recovery"
[ 2.806344@0] 0x000002200000-0x000004200000 : "boot"
[ 2.825858@0] 0x000004200000-0x000004700000 : "config"
[ 2.830635@0] 0x000004700000-0x000010000000 : "nvdata"
[ 2.861714@0] NAND bbt detect factory Bad block at 7fe0000
[ 2.933309@0] nandnormal initialized ok
[ 2.933419@0] aml_ubootenv_init: register env chardev
[ 2.936940@0] aml_ubootenv_init: register env chardev OK
[ 2.941989@0] amlnf_dtb_init: register dtb cdev
[ 2.946724@0] amlnf_dtb_init: register dtd cdev OK
[ 2.951161@0] mtd_nand_probe 267 , err = 0
[ 2.956343@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 2.961728@0] input: aml_vkeypad as /devices/platform/rtc/input/input0
[ 2.968719@2] unifykey: storage in base: 0xffffffc005000000
[ 2.973350@2] unifykey: storage out base: 0xffffffc005040000
[ 2.978951@2] unifykey: storage block base: 0xffffffc005080000
[ 2.984755@2] unifykey: probe done!
[ 2.988961@2] unifykey: no efuse-version set, use default value: -1
[ 2.994485@2] unifykey: key unify config unifykey-num is 6
[ 3.000096@2] unifykey: key unify fact unifykey-num is 6
[ 3.005218@2] unifykey: unifykey_devno: f200000
[ 3.010222@3] unifykey: device unifykeys created ok
[ 3.014715@3] unifykey: aml_unifykeys_init done!
[ 3.019608@3] sysled: module init
[ 3.023110@3] meson_wdt ffd0f0d0.watchdog: start watchdog
[ 3.027864@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[ 3.035272@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[ 3.043980@2] dmc_monitor_probe
[ 3.044875@2] page_trace_module_init, create sysfs failed
[ 3.050693@2] defendkey defendkey: Reserved memory is not enough!
[ 3.055952@2] defendkey: probe of defendkey failed with error -22
[ 3.062309@2] GACT probability NOT on
[ 3.065679@2] Mirror/redirect action on
[ 3.069453@2] u32 classifier
[ 3.072287@2] Actions configured
[ 3.075865@2] Netfilter messages via NETLINK v0.30.
[ 3.081131@2] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 3.087337@2] ctnetlink v0.93: registering with nfnetlink.
[ 3.093174@2] xt_time: kernel timezone is -0000
[ 3.096918@2] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.103590@2] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.108291@2] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 3.113728@2] Initializing XFRM netlink socket
[ 3.119288@2] NET: Registered protocol family 10
[ 3.125239@2] mip6: Mobile IPv6
[ 3.125793@2] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.131811@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.139887@2] NET: Registered protocol family 17
[ 3.142002@2] NET: Registered protocol family 15
[ 3.146642@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.159814@2] l2tp_core: L2TP core driver, V2.0
[ 3.164176@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.169102@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 3.174847@2] l2tp_netlink: L2TP netlink interface
[ 3.179681@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 3.185722@2] l2tp_debugfs: L2TP debugfs support
[ 3.190245@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 3.196913@2] NET: Registered protocol family 35
[ 3.201840@2] Key type dns_resolver registered
[ 3.206417@2] Registered swp emulation handler
[ 3.210372@2] Registered cp15_barrier emulation handler
[ 3.215543@2] Registered setend emulation handler
[ 3.220223@2] disable EAS feature
[ 3.224917@3] registered taskstats version 1
[ 3.241918@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[ 3.748448@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.748536@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.756870@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[ 3.765262@2] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[ 3.772785@1] hub 1-0:1.0: USB hub found
[ 3.775150@1] hub 1-0:1.0: 1 port detected
[ 3.779888@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.784834@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.792746@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.802248@2] hub 2-0:1.0: USB hub found
[ 3.804827@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.812115@2] usb usb2: Unsupported the hub
[ 3.816882@2] aml_vrtc rtc: setting system clock to 2021-12-29 20:02:24 UTC (1640808144)
[ 3.824957@2] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00e1a3000)
[ 3.825033@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[ 3.832939@2] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[ 3.832952@2] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00c3ab600
[ 3.933393@1] dwc_otg: Core Release: 3.10a
[ 3.933451@1] dwc_otg: Setting default values for core params
[ 3.937639@1] dwc_otg: curmode: 0, host_only: 0
[ 3.942148@1] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[ 3.954691@1] dwc_otg: Using Buffer DMA mode
[ 3.954729@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 3.958637@1] dwc_otg: Working on port type = SLAVE
[ 3.963494@1] dwc_otg: Dedicated Tx FIFOs mode
[ 3.970590@0] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[ 3.977212@0] cpucore_cooling_register, max_cpu_core_num:4
[ 3.989813@0] gxbb_pm: enter meson_pm_probe!
[ 3.989869@0] no vddio3v3_en pin
[ 3.991517@0] pm-meson aml_pm: Can't get switch_clk81
[ 3.996648@0] gxbb_pm: meson_pm_probe done
[ 4.001559@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.007938@0] Freeing unused kernel memory: 3648K
[ 4.023097@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.281826@2] ubi0: attaching mtd5
[ 4.300725@2] ubi0: scanning is finished
[ 4.305349@2] ubi0: attached mtd5 (name "config", size 5 MiB)
[ 4.305477@2] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.312537@2] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.319454@2] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.326550@2] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[ 4.332622@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.339981@2] ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1929412561
[ 4.349261@2] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[ 4.358461@3] ubi0: background thread "ubi_bgt0d" started, PID 1076
[ 4.371725@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1080
[ 4.409658@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[ 4.412088@1] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.422116@1] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 4.432334@1] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[ 4.438922@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 6FC5229C-4866-4B92-B42B-5491106989DF, small LPT model
[ 4.463729@2] ubi2: attaching mtd6
[ 4.673091@2] NAND bbt detect factory Bad block at 7fe0000
[ 5.143234@2] ubi2: scanning is finished
[ 5.150453@2] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[ 5.150754@2] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.157808@2] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.164729@2] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.171824@2] ubi2: good PEBs: 1479, bad PEBs: 1, corrupted PEBs: 0
[ 5.178071@2] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.185432@2] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2603558039
[ 5.194712@2] ubi2: available PEBs: 0, total reserved PEBs: 1479, PEBs reserved for bad PEB handling: 3
[ 5.204089@3] ubi2: background thread "ubi_bgt2d" started, PID 1088
[ 5.217419@1] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1092
[ 5.249967@0] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdata_data"
[ 5.252414@0] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 5.262424@0] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[ 5.273259@0] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[ 5.280014@0] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID E385CDEE-0F47-4349-B466-78F7D3A5F35B, small LPT model
[ 5.501093@0] eth0: device MAC address 02:15:f5:c6:77:f0
[ 5.584569@2] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 5.585861@2] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.804022@1] uart_trans: loading out-of-tree module taints kernel.
[ 5.806304@1] register uart_trans chrdev success.
[ 5.809951@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[ 5.817503@1] tty port open success [/dev/ttyS3]!
[ 5.822045@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[ 5.830453@1] init sucess for tty struct (246:3) [/dev/ttyS3]
[ 5.836582@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[ 5.844232@1] tty port open success [/dev/ttyS2]!
[ 5.848898@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[ 5.857311@1] init sucess for tty struct (246:2) [/dev/ttyS2]
[ 5.863404@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 5.871101@1] tty port open success [/dev/ttyS1]!
[ 5.875765@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 5.884171@1] init sucess for tty struct (246:1) [/dev/ttyS1]
[ 5.890514@2] create workqueue success!
[ 7.635974@2] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 7.639265@2] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.016235@0] uart trans dev open.
[ 19.016346@0] uart_buf virt addr = 0xffffffc00bd00000
[ 19.019128@0] uart_buf phys addr = 0x0bd00000
[ 19.023483@0] uart_buf pfn = 0x0000bd00
[ 19.028151@0] uart trans stop send work timer.
[ 19.032435@0] uart trans set chain exist bits:0x7.
[ 19.037012@0] uart trans set work queue count 768.
[ 59.082195@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 69.058524@2] uart set baud to: 4098
[ 69.058584@2] uart set baud to: 4098
[ 69.060185@1] uart set baud to: 4098
[ 109.436314@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 115200 to 3000000
[ 109.439395@1] uart set baud to: 4109
[ 109.503288@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 115200 to 3000000
[ 109.506416@1] uart set baud to: 4109
[ 109.570471@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 3000000
[ 109.573612@2] uart set baud to: 4109
[ 147.441360@1] uart trans start send work timer.
[ 177.187688@1] hrtimer: interrupt took 49542 ns
===========================================Miner log===========================================
2021-12-29 20:02:31 Miner compile time: Wed Oct 20 17:50:59 CST 2021 type: Antminer S19
2021-12-29 20:02:32 This is fix-freq version
2021-12-29 20:02:32 Miner compile time: Wed Oct 20 17:50:59 CST 2021 type: Antminer S19
2021-12-29 20:02:32 commit version: ce69be1 2021-10-19 19:57:55, build by: jenkins 2021-10-20 18:33:58
2021-12-29 20:02:32 opt_multi_version = 1
2021-12-29 20:02:32 opt_bitmain_ab = 1
2021-12-29 20:02:32 mid_auto_gen = 1
2021-12-29 20:02:32 opt_bitmain_work_mode = 0
2021-12-29 20:02:32 port 439 already exported
2021-12-29 20:02:32 port 454 already exported
2021-12-29 20:02:32 port 440 already exported
2021-12-29 20:02:32 port 455 already exported
2021-12-29 20:02:32 port 441 already exported
2021-12-29 20:02:32 port 456 already exported
2021-12-29 20:02:32 port 438 already exported
2021-12-29 20:02:32 port 453 already exported
2021-12-29 20:02:32 port 446 already exported
2021-12-29 20:02:32 port 445 already exported
2021-12-29 20:02:32 Note: front fan is power on!
2021-12-29 20:02:32 Note: rear fan is power on!
2021-12-29 20:02:32 start the http log.
2021-12-29 20:02:32 httpListenThread start ret=0
2021-12-29 20:02:32 start listen on 6060 ...
2021-12-29 20:02:32 load machine BHB42801 conf
2021-12-29 20:02:32 machine : BHB42801
2021-12-29 20:02:32 chain_num 4, chain_domain_num 44, chain_asic_num 88, domain_asic_num 2
2021-12-29 20:02:32 bad chain id = 3
2021-12-29 20:02:35 bad chain id = 3
2021-12-29 20:02:37 ==========================capability start==========================
2021-12-29 20:02:37 board num = 3
2021-12-29 20:02:37 board id = 0, chain num = 1
2021-12-29 20:02:37 chain id = 0
2021-12-29 20:02:37 board id = 1, chain num = 1
2021-12-29 20:02:37 chain id = 1
2021-12-29 20:02:37 board id = 2, chain num = 1
2021-12-29 20:02:37 chain id = 2
2021-12-29 20:02:37 ==========================capability end============================
2021-12-29 20:02:37 chain num = 3
2021-12-29 20:02:38 load chain 0 eeprom data
2021-12-29 20:02:39 load chain 1 eeprom data
2021-12-29 20:02:40 load chain 2 eeprom data
2021-12-29 20:02:40 fan_eft : 0 fan_pwm : 100
2021-12-29 20:02:40 create thread get_nonce_and_register_thread
2021-12-29 20:02:40 fixed working voltage = 1580
2021-12-29 20:02:40 Chain [0] PCB Version: 0x0110
2021-12-29 20:02:40 Chain [0] BOM Version: 0x0010
2021-12-29 20:02:40 Chain [1] PCB Version: 0x0110
2021-12-29 20:02:40 Chain [1] BOM Version: 0x0010
2021-12-29 20:02:40 Chain [2] PCB Version: 0x0110
2021-12-29 20:02:40 Chain [2] BOM Version: 0x0010
2021-12-29 20:02:40 bad chain id = 3
2021-12-29 20:02:40 Fan check passed.
2021-12-29 20:02:40 uart_trans addr:0xf6e0b000.
2021-12-29 20:02:41 chain[0] PIC jump to app
2021-12-29 20:02:43 Check chain[0] PIC fw version=0x89
2021-12-29 20:02:44 chain[1] PIC jump to app
2021-12-29 20:02:45 Check chain[1] PIC fw version=0x89
2021-12-29 20:02:46 chain[2] PIC jump to app
2021-12-29 20:02:48 Check chain[2] PIC fw version=0x89
2021-12-29 20:02:48 create thread pic_heart_beat_thread
2021-12-29 20:02:48 max sensor num = 4
2021-12-29 20:02:48 STATUS_INITED: soc init done!
2021-12-29 20:02:48 temperature_monitor_thread start...
2021-12-29 20:02:50 start to init...
2021-12-29 20:02:50 i2c_sim_init start
2021-12-29 20:02:50 init gpio477
2021-12-29 20:02:50 init gpio476
2021-12-29 20:02:50 i2c_sim_init end
2021-12-29 20:02:52 power open power_version = 0x73
2021-12-29 20:02:53 power type version: 0x0073
2021-12-29 20:02:53 Enter sleep to make sure power release finish.
2021-12-29 20:03:24 Slept 30 seconds, diff = 0.
2021-12-29 20:03:25 set_voltage_by_steps to 1700.
2021-12-29 20:03:28 chain avg vol rise to 16.80
2021-12-29 20:03:30 start up min temp by 75a = 26
2021-12-29 20:03:41 Chain[0]: find 88 asic, times 0
2021-12-29 20:03:51 Chain[1]: find 88 asic, times 0
2021-12-29 20:04:01 Chain[2]: find 88 asic, times 0
2021-12-29 20:04:06 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-12-29 20:04:11 min freq in eeprom = 675
2021-12-29 20:04:11 fixed frequency is 675
2021-12-29 20:04:11 Bring up temperature is 26
2021-12-29 20:04:11 set UART baud to 3000000
2021-12-29 20:04:11 create thread check_miner_status_thread
2021-12-29 20:04:11 create thread check_system_work_thread
2021-12-29 20:04:11 set_voltage_by_steps to 1650.
2021-12-29 20:04:13 fixed step freq_start = 50, freq_end = 675, freq_step = 6.25
2021-12-29 20:04:13 chain = 0 set freq to 56.25
2021-12-29 20:04:13 chain = 1 set freq to 56.25
2021-12-29 20:04:13 chain = 2 set freq to 56.25
2021-12-29 20:04:13 chain = 0 set freq to 62.50
2021-12-29 20:04:13 chain = 1 set freq to 62.50
2021-12-29 20:04:13 chain = 2 set freq to 62.50
2021-12-29 20:04:14 chain = 0 set freq to 68.75
2021-12-29 20:04:14 chain = 1 set freq to 68.75
2021-12-29 20:04:14 chain = 2 set freq to 68.75
2021-12-29 20:04:14 chain = 0 set freq to 75.00
2021-12-29 20:04:14 chain = 1 set freq to 75.00
2021-12-29 20:04:14 chain = 2 set freq to 75.00
2021-12-29 20:04:14 chain = 0 set freq to 81.25
2021-12-29 20:04:14 chain = 1 set freq to 81.25
2021-12-29 20:04:14 chain = 2 set freq to 81.25
2021-12-29 20:04:14 chain = 0 set freq to 87.50
2021-12-29 20:04:14 chain = 1 set freq to 87.50
2021-12-29 20:04:14 chain = 2 set freq to 87.50
2021-12-29 20:04:14 chain = 0 set freq to 93.75
2021-12-29 20:04:14 chain = 1 set freq to 93.75
2021-12-29 20:04:14 chain = 2 set freq to 93.75
2021-12-29 20:04:14 chain = 0 set freq to 100.00
2021-12-29 20:04:14 chain = 1 set freq to 100.00
2021-12-29 20:04:14 chain = 2 set freq to 100.00
2021-12-29 20:04:14 chain = 0 set freq to 106.25
2021-12-29 20:04:14 chain = 1 set freq to 106.25
2021-12-29 20:04:14 chain = 2 set freq to 106.25
2021-12-29 20:04:14 chain = 0 set freq to 112.50
2021-12-29 20:04:14 chain = 1 set freq to 112.50
2021-12-29 20:04:14 chain = 2 set freq to 112.50
2021-12-29 20:04:14 chain = 0 set freq to 118.75
2021-12-29 20:04:14 chain = 1 set freq to 118.75
2021-12-29 20:04:14 chain = 2 set freq to 118.75
2021-12-29 20:04:14 chain = 0 set freq to 125.00
2021-12-29 20:04:14 chain = 1 set freq to 125.00
2021-12-29 20:04:14 chain = 2 set freq to 125.00
2021-12-29 20:04:15 chain = 0 set freq to 131.25
2021-12-29 20:04:15 chain = 1 set freq to 131.25
2021-12-29 20:04:15 chain = 2 set freq to 131.25
2021-12-29 20:04:15 chain = 0 set freq to 137.50
2021-12-29 20:04:15 chain = 1 set freq to 137.50
2021-12-29 20:04:15 chain = 2 set freq to 137.50
2021-12-29 20:04:15 chain = 0 set freq to 143.75
2021-12-29 20:04:15 chain = 1 set freq to 143.75
2021-12-29 20:04:15 chain = 2 set freq to 143.75
2021-12-29 20:04:15 chain = 0 set freq to 150.00
2021-12-29 20:04:15 chain = 1 set freq to 150.00
2021-12-29 20:04:15 chain = 2 set freq to 150.00
2021-12-29 20:04:15 chain = 0 set freq to 156.25
2021-12-29 20:04:15 chain = 1 set freq to 156.25
2021-12-29 20:04:15 chain = 2 set freq to 156.25
2021-12-29 20:04:15 chain = 0 set freq to 162.50
2021-12-29 20:04:15 chain = 1 set freq to 162.50
2021-12-29 20:04:15 chain = 2 set freq to 162.50
2021-12-29 20:04:15 chain = 0 set freq to 168.75
2021-12-29 20:04:15 chain = 1 set freq to 168.75
2021-12-29 20:04:15 chain = 2 set freq to 168.75
2021-12-29 20:04:15 chain = 0 set freq to 175.00
2021-12-29 20:04:15 chain = 1 set freq to 175.00
2021-12-29 20:04:15 chain = 2 set freq to 175.00
2021-12-29 20:04:15 chain = 0 set freq to 181.25
2021-12-29 20:04:15 chain = 1 set freq to 181.25
2021-12-29 20:04:15 chain = 2 set freq to 181.25
2021-12-29 20:04:15 chain = 0 set freq to 187.50
2021-12-29 20:04:15 chain = 1 set freq to 187.50
2021-12-29 20:04:15 chain = 2 set freq to 187.50
2021-12-29 20:04:16 chain = 0 set freq to 193.75
2021-12-29 20:04:16 chain = 1 set freq to 193.75
2021-12-29 20:04:16 chain = 2 set freq to 193.75
2021-12-29 20:04:16 chain = 0 set freq to 200.00
2021-12-29 20:04:16 chain = 1 set freq to 200.00
2021-12-29 20:04:16 chain = 2 set freq to 200.00
2021-12-29 20:04:16 chain = 0 set freq to 206.25
2021-12-29 20:04:16 chain = 1 set freq to 206.25
2021-12-29 20:04:16 chain = 2 set freq to 206.25
2021-12-29 20:04:16 chain = 0 set freq to 212.50
2021-12-29 20:04:16 chain = 1 set freq to 212.50
2021-12-29 20:04:16 chain = 2 set freq to 212.50
2021-12-29 20:04:16 chain = 0 set freq to 218.75
2021-12-29 20:04:16 chain = 1 set freq to 218.75
2021-12-29 20:04:16 chain = 2 set freq to 218.75
2021-12-29 20:04:16 chain = 0 set freq to 225.00
2021-12-29 20:04:16 chain = 1 set freq to 225.00
2021-12-29 20:04:16 chain = 2 set freq to 225.00
2021-12-29 20:04:16 chain = 0 set freq to 231.25
2021-12-29 20:04:16 chain = 1 set freq to 231.25
2021-12-29 20:04:16 chain = 2 set freq to 231.25
2021-12-29 20:04:16 chain = 0 set freq to 237.50
2021-12-29 20:04:16 chain = 1 set freq to 237.50
2021-12-29 20:04:16 chain = 2 set freq to 237.50
2021-12-29 20:04:16 chain = 0 set freq to 243.75
2021-12-29 20:04:16 chain = 1 set freq to 243.75
2021-12-29 20:04:16 chain = 2 set freq to 243.75
2021-12-29 20:04:17 chain = 0 set freq to 250.00
2021-12-29 20:04:17 chain = 1 set freq to 250.00
2021-12-29 20:04:17 chain = 2 set freq to 250.00
2021-12-29 20:04:17 chain = 0 set freq to 256.25
2021-12-29 20:04:17 chain = 1 set freq to 256.25
2021-12-29 20:04:17 chain = 2 set freq to 256.25
2021-12-29 20:04:17 chain = 0 set freq to 262.50
2021-12-29 20:04:17 chain = 1 set freq to 262.50
2021-12-29 20:04:17 chain = 2 set freq to 262.50
2021-12-29 20:04:17 chain = 0 set freq to 268.75
2021-12-29 20:04:17 chain = 1 set freq to 268.75
2021-12-29 20:04:17 chain = 2 set freq to 268.75
2021-12-29 20:04:17 chain = 0 set freq to 275.00
2021-12-29 20:04:17 chain = 1 set freq to 275.00
2021-12-29 20:04:17 chain = 2 set freq to 275.00
2021-12-29 20:04:17 chain = 0 set freq to 281.25
2021-12-29 20:04:17 chain = 1 set freq to 281.25
2021-12-29 20:04:17 chain = 2 set freq to 281.25
2021-12-29 20:04:17 chain = 0 set freq to 287.50
2021-12-29 20:04:17 chain = 1 set freq to 287.50
2021-12-29 20:04:17 chain = 2 set freq to 287.50
2021-12-29 20:04:17 chain = 0 set freq to 293.75
2021-12-29 20:04:17 chain = 1 set freq to 293.75
2021-12-29 20:04:17 chain = 2 set freq to 293.75
2021-12-29 20:04:17 chain = 0 set freq to 300.00
2021-12-29 20:04:17 chain = 1 set freq to 300.00
2021-12-29 20:04:17 chain = 2 set freq to 300.00
2021-12-29 20:04:17 chain = 0 set freq to 306.25
2021-12-29 20:04:17 chain = 1 set freq to 306.25
2021-12-29 20:04:17 chain = 2 set freq to 306.25
2021-12-29 20:04:18 chain = 0 set freq to 312.50
2021-12-29 20:04:18 chain = 1 set freq to 312.50
2021-12-29 20:04:18 chain = 2 set freq to 312.50
2021-12-29 20:04:18 chain = 0 set freq to 318.75
2021-12-29 20:04:18 chain = 1 set freq to 318.75
2021-12-29 20:04:18 chain = 2 set freq to 318.75
2021-12-29 20:04:18 chain = 0 set freq to 325.00
2021-12-29 20:04:18 chain = 1 set freq to 325.00
2021-12-29 20:04:18 chain = 2 set freq to 325.00
2021-12-29 20:04:18 chain = 0 set freq to 331.25
2021-12-29 20:04:18 chain = 1 set freq to 331.25
2021-12-29 20:04:18 chain = 2 set freq to 331.25
2021-12-29 20:04:18 chain = 0 set freq to 337.50
2021-12-29 20:04:18 chain = 1 set freq to 337.50
2021-12-29 20:04:18 chain = 2 set freq to 337.50
2021-12-29 20:04:18 chain = 0 set freq to 343.75
2021-12-29 20:04:18 chain = 1 set freq to 343.75
2021-12-29 20:04:18 chain = 2 set freq to 343.75
2021-12-29 20:04:18 chain = 0 set freq to 350.00
2021-12-29 20:04:18 chain = 1 set freq to 350.00
2021-12-29 20:04:18 chain = 2 set freq to 350.00
2021-12-29 20:04:18 chain = 0 set freq to 356.25
2021-12-29 20:04:18 chain = 1 set freq to 356.25
2021-12-29 20:04:18 chain = 2 set freq to 356.25
2021-12-29 20:04:18 chain = 0 set freq to 362.50
2021-12-29 20:04:18 chain = 1 set freq to 362.50
2021-12-29 20:04:18 chain = 2 set freq to 362.50
2021-12-29 20:04:18 chain = 0 set freq to 368.75
2021-12-29 20:04:18 chain = 1 set freq to 368.75
2021-12-29 20:04:18 chain = 2 set freq to 368.75
2021-12-29 20:04:19 chain = 0 set freq to 375.00
2021-12-29 20:04:19 chain = 1 set freq to 375.00
2021-12-29 20:04:19 chain = 2 set freq to 375.00
2021-12-29 20:04:19 chain = 0 set freq to 381.25
2021-12-29 20:04:19 chain = 1 set freq to 381.25
2021-12-29 20:04:19 chain = 2 set freq to 381.25
2021-12-29 20:04:19 chain = 0 set freq to 387.50
2021-12-29 20:04:19 chain = 1 set freq to 387.50
2021-12-29 20:04:19 chain = 2 set freq to 387.50
2021-12-29 20:04:19 chain = 0 set freq to 393.75
2021-12-29 20:04:19 chain = 1 set freq to 393.75
2021-12-29 20:04:19 chain = 2 set freq to 393.75
2021-12-29 20:04:19 chain = 0 set freq to 400.00
2021-12-29 20:04:19 chain = 1 set freq to 400.00
2021-12-29 20:04:19 chain = 2 set freq to 400.00
2021-12-29 20:04:19 chain = 0 set freq to 406.25
2021-12-29 20:04:19 chain = 1 set freq to 406.25
2021-12-29 20:04:19 chain = 2 set freq to 406.25
2021-12-29 20:04:19 chain = 0 set freq to 412.50
2021-12-29 20:04:19 chain = 1 set freq to 412.50
2021-12-29 20:04:19 chain = 2 set freq to 412.50
2021-12-29 20:04:19 chain = 0 set freq to 418.75
2021-12-29 20:04:19 chain = 1 set freq to 418.75
2021-12-29 20:04:19 chain = 2 set freq to 418.75
2021-12-29 20:04:19 chain = 0 set freq to 425.00
2021-12-29 20:04:19 chain = 1 set freq to 425.00
2021-12-29 20:04:19 chain = 2 set freq to 425.00
2021-12-29 20:04:19 chain = 0 set freq to 431.25
2021-12-29 20:04:19 chain = 1 set freq to 431.25
2021-12-29 20:04:19 chain = 2 set freq to 431.25
2021-12-29 20:04:20 chain = 0 set freq to 437.50
2021-12-29 20:04:20 chain = 1 set freq to 437.50
2021-12-29 20:04:20 chain = 2 set freq to 437.50
2021-12-29 20:04:20 chain = 0 set freq to 443.75
2021-12-29 20:04:20 chain = 1 set freq to 443.75
2021-12-29 20:04:20 chain = 2 set freq to 443.75
2021-12-29 20:04:20 chain = 0 set freq to 450.00
2021-12-29 20:04:20 chain = 1 set freq to 450.00
2021-12-29 20:04:20 chain = 2 set freq to 450.00
2021-12-29 20:04:20 chain = 0 set freq to 456.25
2021-12-29 20:04:20 chain = 1 set freq to 456.25
2021-12-29 20:04:20 chain = 2 set freq to 456.25
2021-12-29 20:04:20 chain = 0 set freq to 462.50
2021-12-29 20:04:20 chain = 1 set freq to 462.50
2021-12-29 20:04:20 chain = 2 set freq to 462.50
2021-12-29 20:04:20 chain = 0 set freq to 468.75
2021-12-29 20:04:20 chain = 1 set freq to 468.75
[ 0.000000@0] Linux version 4.9.113 (jenkins@nomd-nomd-fwc-bj) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Wed Oct 20 18:57:17 CST 2021
[ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000ff803000 (options '')
[ 0.000000@0] bootconsole [aml_uart0] enabled
[ 0.000000@0] efi: Getting EFI parameters from FDT:
[ 0.000000@0] efi: UEFI not found.
[ 0.000000@0] 07400000 - 07500000, 1024 KB, ramoops@0x07400000
[ 0.000000@0] __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[ 0.000000@0] 05000000 - 05400000, 4096 KB, linux,secmon
[ 0.000000@0] __reserved_mem_alloc_size, start:0x000000003e000000, end:0x0000000040000000, len:32 MiB
[ 0.000000@0] failed to allocate memory for node linux,meson-fb, size:32 MB
[ 0.000000@0] cma: Reserved 8 MiB at 0x000000000f800000
[ 0.000000@0] On node 0 totalpages: 65536
[ 0.000000@0] DMA zone: 1024 pages used for memmap
[ 0.000000@0] DMA zone: 0 pages reserved
[ 0.000000@0] DMA zone: 65536 pages, LIFO batch:15
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 25 pages/cpu @ffffffc00f753000 s64536 r8192 d29672 u102400
[ 0.000000@0] pcpu-alloc: s64536 r8192 d29672 u102400 alloc=25*4096
[ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000@0] Detected VIPT I-cache on CPU0
[ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=,loaded,androidboot.selinux=enforcing androidboot.firstboot=1 jtag=disable androidboot.hardware=amlogic androidboot.bootloader=U-Boot 2015.01 androidboot.build.expect.baseband=N/A androidboot.serialno=1234567890 androidboot.rpmb_state=0 rootfstype=ramfs init=/sbin/init
[ 0.000000@0] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000@0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000@0] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000@0] Memory: 219920K/262144K available (8764K kernel code, 1194K rwdata, 2428K rodata, 3648K init, 1018K bss, 29936K reserved, 12288K cma-reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009910000 ( 8768 KB)
[ 0.000000@0] .rodata : 0xffffff8009910000 - 0xffffff8009b80000 ( 2496 KB)
[ 0.000000@0] .init : 0xffffff8009b80000 - 0xffffff8009f10000 ( 3648 KB)
[ 0.000000@0] .data : 0xffffff8009f10000 - 0xffffff800a03aa00 ( 1195 KB)
[ 0.000000@0] .bss : 0xffffff800a03aa00 - 0xffffff800a139534 ( 1019 KB)
[ 0.000000@0] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000@0] 0xffffffbf00000000 - 0xffffffbf00400000 ( 4 MB actual)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc010000000 ( 256 MB)
[ 0.000000@0] can't find symbol:arm_dma_alloc
[ 0.000000@0] can't find symbol:__alloc_from_contiguous
[ 0.000000@0] can't find symbol:cma_allocator_alloc
[ 0.000000@0] 0, addr:ffffff800971cff0 + 140, aml_cma_alloc_post_hook
[ 0.000000@0] 1, addr:ffffff800951f258 + 78, dma_alloc_from_contiguous
[ 0.000000@0] 2, addr:ffffff80091fdd50 + 388, cma_alloc
[ 0.000000@0] 3, addr:ffffff80091f76c8 + 2d0, __kmalloc_track_caller
[ 0.000000@0] 4, addr:ffffff80091f4a70 + 2d0, __kmalloc
[ 0.000000@0] 5, addr:ffffff80091f4750 + 258, kmem_cache_alloc_trace
[ 0.000000@0] 6, addr:ffffff80091f4500 + 250, kmem_cache_alloc
[ 0.000000@0] 7, addr:ffffff80091f4490 + 70, __slab_alloc.isra.24.constprop.28
[ 0.000000@0] 8, addr:ffffff80091f4108 + 388, ___slab_alloc.constprop.29
[ 0.000000@0] 9, addr:ffffff80091f1e70 + 420, new_slab
[ 0.000000@0] 10, addr:ffffff80091e52f8 + b0, vzalloc
[ 0.000000@0] 11, addr:ffffff80091e5248 + b0, vmalloc
[ 0.000000@0] 12, addr:ffffff80091e4b00 + 2e0, __vmalloc_node_range
[ 0.000000@0] 13, addr:ffffff80091ca410 + 110, kmalloc_order_trace
[ 0.000000@0] 14, addr:ffffff80091ca2a0 + 170, kmalloc_order
[ 0.000000@0] 15, addr:ffffff80091ab5a8 + 168, __alloc_page_frag
[ 0.000000@0] 16, addr:ffffff80091ab540 + 68, alloc_pages_exact
[ 0.000000@0] 17, addr:ffffff80091ab510 + 30, get_zeroed_page
[ 0.000000@0] 18, addr:ffffff80091ab4b8 + 58, __get_free_pages
[ 0.000000@0] 19, addr:ffffff80091aa800 + cb8, __alloc_pages_nodemask
[ 0.000000@0] 20, addr:ffffff800909c6e8 + 2a8, __dma_alloc
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] Build-time adjustment of leaf fanout to 64.
[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000@0]
[ 0.000000@0] **********************************************************
[ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000@0] ** **
[ 0.000000@0] ** trace_printk() being used. Allocating extra memory. **
[ 0.000000@0] ** **
[ 0.000000@0] ** This means that this is a DEBUG kernel and it is **
[ 0.000000@0] ** unsafe for production use. **
[ 0.000000@0] ** **
[ 0.000000@0] ** If you see this message and you are not debugging **
[ 0.000000@0] ** the kernel, report this immediately to your vendor! **
[ 0.000000@0] ** **
[ 0.000000@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000@0] **********************************************************
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000@0] axg_aoclkc_init: register ao clk ok!
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_sdemmc: register amlogic sdemmc clk
[ 0.000000@0] axg_amlogic_init_media: register meson media clk
[ 0.000000@0] axg_amlogic_init_misc: register amlogic axg misc clks
[ 0.000000@0] axg_amlogic_init_misc: register amlogic sdemmc clk
[ 0.000000@0] axg_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008253@0] meson_bc_timer: mclk->mux_reg =ffffff800800a190,mclk->reg =ffffff800800c194
[ 0.016912@0] Console: colour dummy device 80x25
[ 0.021110@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.031586@0] pid_max: default: 32768 minimum: 301
[ 0.036442@0] thread_stack_cache_init, vmap:ffffffc00edaf600, bitmap:ffffffc00eda3000, cache page:ede0
[ 0.045772@0] thread_stack_cache_init, allocation vm area:ffffffc00edd94c0, addr:ffffff8020000000, size:20001000
[ 0.056005@0] cpu 0, vmap_stack:[ffffffc00f75c960-ffffffc00f760950]
[ 0.062304@0] cpu 0, irq_stack: [ffffffc00f753060-ffffffc00f757050]
[ 0.068604@0] cpu 1, vmap_stack:[ffffffc00f775960-ffffffc00f779950]
[ 0.074903@0] cpu 1, irq_stack: [ffffffc00f76c060-ffffffc00f770050]
[ 0.081203@0] cpu 2, vmap_stack:[ffffffc00f78e960-ffffffc00f792950]
[ 0.087503@0] cpu 2, irq_stack: [ffffffc00f785060-ffffffc00f789050]
[ 0.093804@0] cpu 3, vmap_stack:[ffffffc00f7a7960-ffffffc00f7ab950]
[ 0.100103@0] cpu 3, irq_stack: [ffffffc00f79e060-ffffffc00f7a2050]
[ 0.106466@0] Security Framework initialized
[ 0.110696@0] SELinux: Initializing.
[ 0.114388@0] SELinux: Starting in permissive mode
[ 0.114428@0] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.121108@0] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.128870@0] ftrace: allocating 30089 entries in 118 pages
[ 0.184563@0] sched-energy: CPU device node has no sched-energy-costs
[ 0.185379@0] CPU0: update cpu_capacity 1024
[ 0.189706@0] ASID allocator initialised with 32768 entries
[ 0.227690@0] secmon: can't fine clear_range
[ 0.227901@0] EFI services will not be available.
[ 0.231174@0] Meson chip version = RevC (25:C - 23:0)
[ 0.265037@1] Detected VIPT I-cache on CPU1
[ 0.265097@1] CPU1: update cpu_capacity 1024
[ 0.265099@1] CPU1: Booted secondary processor [410fd034]
[ 0.293112@2] Detected VIPT I-cache on CPU2
[ 0.293168@2] CPU2: update cpu_capacity 1024
[ 0.293170@2] CPU2: Booted secondary processor [410fd034]
[ 0.321163@3] Detected VIPT I-cache on CPU3
[ 0.321215@3] CPU3: update cpu_capacity 1024
[ 0.321218@3] CPU3: Booted secondary processor [410fd034]
[ 0.321308@0] Brought up 4 CPUs
[ 0.360526@0] SMP: Total of 4 processors activated.
[ 0.365435@0] CPU features: detected feature: 32-bit EL0 Support
[ 0.371471@0] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.382038@0] CPU: All CPU(s) started at EL2
[ 0.383212@0] alternatives: patching kernel code
[ 0.388532@1] addr:ffffff802007be10 is in kernel, size fix 4096->10, data:mode=0755
[ 0.395741@0] devtmpfs: initialized
[ 0.411216@0] DMI not present or invalid.
[ 0.411574@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.419597@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.426159@0] pinctrl core: initialized pinctrl subsystem
[ 0.432584@0] NET: Registered protocol family 16
[ 0.452104@0] cpuidle: using governor menu
[ 0.452612@0] vdso: 2 pages (1 code @ ffffff8009917000, 1 data @ ffffff8009f14000)
[ 0.458223@0] hw-breakpoint: found 6 breakpoint and 2 watchpoint registers.
[ 0.465633@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.471798@0] clkmsr: clkmsr: driver init
[ 0.475829@0] aml_watch_point_probe, in, wp:2
[ 0.481281@0] pstore: using zlib compression
[ 0.484754@0] console [pstore-1] enabled
[ 0.488093@0] pstore: Registered ramoops as persistent store backend
[ 0.494506@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.508880@0] aml_iomap: amlogic iomap probe done
[ 0.515820@0] clkmsr: msr_clk_reg0=ffffff800817e004,msr_clk_reg2=ffffff80081d100c
[ 0.517753@0] clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[ 0.614386@0] usbcore: registered new interface driver usbfs
[ 0.614550@0] usbcore: registered new interface driver hub
[ 0.620184@0] usbcore: registered new device driver usb
[ 0.625504@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.630403@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.639802@0] PTP clock support registered
[ 0.644159@0] dmi: Firmware registration failed.
[ 0.652935@0] secmon: reserve_mem_size:0x300000
[ 0.653108@0] secmon secmon: assigned reserved memory node linux,secmon
[ 0.660120@0] secmon: get page:ffffffbf00140000, 5000
[ 0.664768@0] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[ 0.673152@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.681073@0] NetLabel: Initializing
[ 0.683202@0] NetLabel: domain hash size = 128
[ 0.687789@0] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.693039@0] NetLabel: unlabeled traffic allowed by default
[ 0.699656@0] clocksource: Switched to clocksource arch_sys_counter
[ 0.829002@0] VFS: Disk quotas dquot_6.6.0
[ 0.829150@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.856106@0] NET: Registered protocol family 2
[ 0.857174@0] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.862383@0] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.869018@0] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.875620@0] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.881568@0] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.888324@0] NET: Registered protocol family 1
[ 0.893283@0] RPC: Registered named UNIX socket transport module.
[ 0.898701@0] RPC: Registered udp transport module.
[ 0.903579@0] RPC: Registered tcp transport module.
[ 0.908478@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.917707@0] Unpacking initramfs...
[ 1.418126@2] Initramfs unpacking failed: junk in compressed archive
[ 1.424970@2] Freeing initrd memory: 6536K
[ 1.425882@2] hw perfevents: clusterb_enabled = 0
[ 1.428198@2] hw perfevents: cpumasks 0xf, 0x0
[ 1.432679@2] hw perfevents: cluster A irq = 7
[ 1.437243@2] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.447449@2] audit: initializing netlink subsys (disabled)
[ 1.450808@2] audit: type=2000 audit(1.264:1): initialized
[ 1.458093@2] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[ 1.482954@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.486036@2] NFS: Registering the id_resolver key type
[ 1.488693@2] Key type id_resolver registered
[ 1.492996@2] Key type id_legacy registered
[ 1.497656@2] fuse init (API version 7.26)
[ 1.503076@2] SELinux: Registering netfilter hooks
[ 1.509365@2] NET: Registered protocol family 38
[ 1.509427@2] Key type asymmetric registered
[ 1.512666@2] Asymmetric key parser 'x509' registered
[ 1.518177@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.525364@2] io scheduler noop registered (default)
[ 1.530340@2] io scheduler deadline registered
[ 1.535211@2] io scheduler cfq registered
[ 1.556498@3] random: fast init done
[ 1.556598@3] random: crng init done
[ 1.557069@2] Unable to detect cache hierarchy for CPU 0
[ 1.589925@2] loop: module loaded
[ 1.595511@2] zram: Added device: zram0
[ 1.595957@2] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.600979@2] libphy: Fixed MDIO Bus: probed
[ 1.605460@2] tun: Universal TUN/TAP device driver, 1.6
[ 1.609931@2] tun: (C) 1999-2004 Max Krasnyansky
[ 1.618105@2] ee eth reset:Addr = ffffff80081fd008
[ 1.625647@2] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 1.627575@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 1.632849@2] Ring mode enabled
[ 1.636082@2] DMA HW capability register supported
[ 1.640795@2] Normal descriptors
[ 1.644128@2] RX Checksum Offload Engine supported
[ 1.649019@2] COE Type 2
[ 1.651627@2] TX Checksum insertion supported
[ 1.656109@2] Wake-Up On Lan supported
[ 1.660059@2] Enable RX Mitigation via HW Watchdog Timer
[ 1.673725@2] libphy: stmmac: probed
[ 1.673777@2] eth%d: PHY ID 0007c0f1 at 0 IRQ POLL (stmmac-0:00) active
[ 1.680309@2] PPP generic driver version 2.4.2
[ 1.683187@2] PPP BSD Compression module registered
[ 1.687714@2] PPP Deflate Compression module registered
[ 1.692972@2] PPP MPPE Compression module registered
[ 1.697928@2] NET: Registered protocol family 24
[ 1.703426@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.709324@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.716380@2] usbcore: registered new interface driver cdc_acm
[ 1.721569@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.730022@2] usbcore: registered new interface driver usbserial
[ 1.736734@3] mousedev: PS/2 mouse device common for all mice
[ 1.742157@3] usbcore: registered new interface driver xpad
[ 1.747555@2] i2c /dev entries driver
[ 1.752356@2] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[ 1.756557@2] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[ 1.767473@2] ff803000.serial: clock gate not found
[ 1.769099@2] meson_uart ff803000.serial: ==uart0 reg addr = ffffff800830d000
[ 1.776254@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 13, base_baud = 1500000) is a meson_uart
[ 1.791186@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 1.793896@2] console [ttyS0] enabled
[ 1.801106@2] bootconsole [aml_uart0] disabled
[ 1.810829@1] ff804000.serial: clock gate not found
[ 1.814909@1] meson_uart ff804000.serial: ==uart3 reg addr = ffffff8008321000
[ 1.822014@1] ff804000.serial: ttyS3 at MMIO 0xff804000 (irq = 14, base_baud = 1500000) is a meson_uart
[ 1.832384@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff8008323000
[ 1.838510@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 25, base_baud = 1500000) is a meson_uart
[ 1.848715@2] meson_uart ffd23000.serial: ==uart2 reg addr = ffffff8008325000
[ 1.854980@2] ffd23000.serial: ttyS2 at MMIO 0xffd23000 (irq = 26, base_baud = 1500000) is a meson_uart
[ 1.865967@1] amlogic-new-usb2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff8008348000
[ 1.875249@1] amlogic-new-usb3 ffe09080.usb3phy: This phy has no usb port
[ 1.881721@1] amlogic-new-usb3 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff800834c080
[ 1.896816@0] i2c i2c-1: of_i2c: modalias failure on /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.900557@0] i2c i2c-1: Failed to create I2C device for /soc/aobus@ff800000/i2c@5000/mcu6350@40
[ 1.912974@0] aml_dma ff63e000.aml_dma: Aml dma
[ 1.916070@0] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[ 1.921038@0] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 1.927438@0] efusekeynum: 4
[ 1.929772@0] efusekeyname: mac offset: 0 size: 6
[ 1.936168@0] efusekeyname: mac_bt offset: 6 size: 6
[ 1.942571@0] efusekeyname: mac_wifi offset: 12 size: 6
[ 1.948987@0] efusekeyname: usid offset: 18 size: 16
[ 1.955895@3] efuse efuse: probe OK!
[ 1.961771@3] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 1.968546@0] meson-mmc: >>>>>>>>hostbase ffffff8008358000, dmode
[ 1.973621@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
[ 1.978803@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
[ 2.023699@0] meson-mmc: meson_mmc_probe() : success!
[ 2.023980@0] amlogic mtd driver init
[ 2.028024@0] prase_get_dtb_nand_parameter:128,parse dts start
[ 2.032766@0] bl mode descrete
[ 2.035625@0] fip_copies 4
[ 2.038332@0] fip_size 0x200000
[ 2.041450@0] nand_clk_ctrl 0xffe07000
[ 2.045173@0] prase_get_dtb_nand_parameter:234,parse dts end
[ 2.050841@0] nand_clk_ctrl 0xffe07000
[ 2.054564@0] nand register base ffffff80083df800, nand clock register ffffff80083e1000
[ 2.063309@0] plat->aml_nand_device ffffff800a005a90
[ 2.067470@0] m3_nand_probe() aml_nand_device ffffff800a005a90
[ 2.073587@0] NAND device id: 2c da 90 95 6 0
[ 2.077613@0] NAND device: Manufacturer ID:
[ 2.081668@0] 0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[ 2.088709@0] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.094142@0] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.099690@0] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.105935@0] mtd->oobavail: 0x8
[ 2.109365@0] aml_nand_init 2119: plat-name:bootloader
[ 2.114257@0] Creating 1 MTD partitions on "bootloader":
[ 2.119542@0] 0x000000000000-0x000000200000 : "bootloader"
[ 2.128311@1] bootloader initialized ok
[ 2.128802@1] plat->aml_nand_device ffffff800a005a90
[ 2.133795@1] m3_nand_probe() aml_nand_device ffffff800a005a90
[ 2.139960@1] NAND device id: 2c da 90 95 6 0
[ 2.143900@1] NAND device: Manufacturer ID:
[ 2.147967@1] 0x2c, Chip ID: 0x2c (Micron A revision NAND 2Gib MT29F2G08-A)
[ 2.155009@1] oob_fill_cnt =32 oob_size =64, bch_bytes =14
[ 2.160446@1] ecc mode:6 ecc_page_num=2 eep_need_oobsize=16
[ 2.166003@1] plane_num=1 writesize=0x800 ecc.size=0x200 bch_mode=1
[ 2.172235@1] mtd->oobavail: 0x8
[ 2.175748@1] aml_nand_init 2119: plat-name:nandnormal
[ 2.180589@1] bbt_start=20
[ 2.183216@1] env_start=24
[ 2.185924@1] key_start=32
[ 2.188606@1] dtb_start=40
[ 2.191276@1] ddr_start=44
[ 2.193983@1] nbbt: info size=0x800 max_scan_blk=24, start_blk=20
[ 2.200475@1] get_free_node 43: bitmap=0
[ 2.203951@1] get_free_node 55: bitmap=1
[ 2.208042@1] get_free_node 43: bitmap=1
[ 2.211749@1] get_free_node 55: bitmap=3
[ 2.215841@1] get_free_node 43: bitmap=3
[ 2.219531@1] get_free_node 55: bitmap=7
[ 2.223450@1] nbbt : phy_blk_addr=20, ec=0, phy_page_addr=0, timestamp=1
[ 2.230120@1] nbbt free list:
[ 2.233067@1] blockN=21, ec=-1, dirty_flag=0
[ 2.237313@1] blockN=22, ec=-1, dirty_flag=0
[ 2.241558@1] blockN=23, ec=-1, dirty_flag=0
[ 2.245808@1] aml_nand_scan_rsv_info 1141: page_num=1
[ 2.251219@1] nbbt valid addr: 280000
[ 2.254477@1] aml_nand_bbt_check 1306 bbt is valid, reading.
[ 2.260109@1] aml_nand_read_rsv_info:423,read nbbt info at 280000
[ 2.266370@1] nenv: info size=0x10000 max_scan_blk=32, start_blk=24
[ 2.272799@1] get_free_node 43: bitmap=7
[ 2.276315@1] get_free_node 55: bitmap=f
[ 2.280407@1] get_free_node 43: bitmap=f
[ 2.284115@1] get_free_node 55: bitmap=1f
[ 2.288294@1] get_free_node 43: bitmap=1f
[ 2.292089@1] get_free_node 55: bitmap=3f
[ 2.296268@1] get_free_node 43: bitmap=3f
[ 2.300062@1] get_free_node 55: bitmap=7f
[ 2.304241@1] get_free_node 43: bitmap=7f
[ 2.308035@1] get_free_node 55: bitmap=ff
[ 2.312214@1] get_free_node 43: bitmap=ff
[ 2.316008@1] get_free_node 55: bitmap=1ff
[ 2.320274@1] get_free_node 43: bitmap=1ff
[ 2.324155@1] get_free_node 55: bitmap=3ff
[ 2.328228@1] nenv : phy_blk_addr=24, ec=0, phy_page_addr=0, timestamp=1
[ 2.334899@1] nenv free list:
[ 2.337847@1] blockN=25, ec=-1, dirty_flag=0
[ 2.342093@1] blockN=26, ec=-1, dirty_flag=0
[ 2.346340@1] blockN=27, ec=-1, dirty_flag=0
[ 2.350587@1] blockN=28, ec=-1, dirty_flag=0
[ 2.354833@1] blockN=29, ec=-1, dirty_flag=0
[ 2.359080@1] blockN=30, ec=-1, dirty_flag=0
[ 2.363326@1] blockN=31, ec=-1, dirty_flag=0
[ 2.367573@1] aml_nand_scan_rsv_info 1141: page_num=32
[ 2.384905@1] nenv valid addr: 310000
[ 2.384940@1] nkey: info size=0x8000 max_scan_blk=40, start_blk=32
[ 2.389297@1] get_free_node 43: bitmap=3ff
[ 2.393177@1] get_free_node 55: bitmap=7ff
[ 2.397442@1] get_free_node 43: bitmap=7ff
[ 2.401323@1] get_free_node 55: bitmap=fff
[ 2.405589@1] get_free_node 43: bitmap=fff
[ 2.409470@1] get_free_node 55: bitmap=1fff
[ 2.413822@1] get_free_node 43: bitmap=1fff
[ 2.417790@1] get_free_node 55: bitmap=3fff
[ 2.422142@1] get_free_node 43: bitmap=3fff
[ 2.426110@1] get_free_node 55: bitmap=7fff
[ 2.430462@1] get_free_node 43: bitmap=7fff
[ 2.434430@1] get_free_node 55: bitmap=ffff
[ 2.438780@1] get_free_node 43: bitmap=ffff
[ 2.442750@1] get_free_node 55: bitmap=1ffff
[ 2.447189@1] get_free_node 43: bitmap=1ffff
[ 2.451243@1] get_free_node 55: bitmap=3ffff
[ 2.455490@1] nkey : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.462160@1] nkey free list:
[ 2.465107@1] blockN=32, ec=-1, dirty_flag=0
[ 2.469354@1] blockN=33, ec=-1, dirty_flag=0
[ 2.473601@1] blockN=34, ec=-1, dirty_flag=0
[ 2.477848@1] blockN=35, ec=-1, dirty_flag=0
[ 2.482094@1] blockN=36, ec=-1, dirty_flag=0
[ 2.486341@1] blockN=37, ec=-1, dirty_flag=0
[ 2.490587@1] blockN=38, ec=-1, dirty_flag=0
[ 2.494834@1] blockN=39, ec=-1, dirty_flag=0
[ 2.499082@1] aml_nand_scan_rsv_info 1141: page_num=16
[ 2.504193@1] nkey valid addr: fffffffffffe0000
[ 2.508702@1] aml_nand_key_check 1251 NO key exist
[ 2.513470@1] ndtb: info size=0x20000 max_scan_blk=44, start_blk=40
[ 2.520094@1] get_free_node 43: bitmap=3ffff
[ 2.523956@1] get_free_node 55: bitmap=7ffff
[ 2.528395@1] get_free_node 43: bitmap=7ffff
[ 2.532450@1] get_free_node 55: bitmap=fffff
[ 2.536888@1] get_free_node 43: bitmap=fffff
[ 2.540943@1] get_free_node 55: bitmap=1fffff
[ 2.545276@1] ndtb : phy_blk_addr=40, ec=0, phy_page_addr=0, timestamp=1
[ 2.551947@1] ndtb free list:
[ 2.554878@1] blockN=41, ec=-1, dirty_flag=0
[ 2.559141@1] blockN=42, ec=-1, dirty_flag=0
[ 2.563388@1] blockN=43, ec=-1, dirty_flag=0
[ 2.567649@1] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.584985@1] ndtb valid addr: 500000
[ 2.585018@1] nddr: info size=0x20000 max_scan_blk=46, start_blk=44
[ 2.589470@1] get_free_node 43: bitmap=1fffff
[ 2.593611@1] get_free_node 55: bitmap=3fffff
[ 2.598137@1] get_free_node 43: bitmap=3fffff
[ 2.602277@1] get_free_node 55: bitmap=7fffff
[ 2.606610@1] nddr : phy_blk_addr=-1, ec=0, phy_page_addr=0, timestamp=0
[ 2.613281@1] nddr free list:
[ 2.616228@1] blockN=44, ec=-1, dirty_flag=0
[ 2.620475@1] blockN=45, ec=-1, dirty_flag=0
[ 2.624722@1] aml_nand_scan_rsv_info 1141: page_num=64
[ 2.629835@1] nddr valid addr: fffffffffffe0000
[ 2.634342@1] aml_nand_ddr_check 1281 NO ddr exist
[ 2.639112@1] tpl: off 8388608, size 8388608
[ 2.704123@1] NAND bbt detect factory Bad block at 7fe0000
[ 2.704173@1] aml_nand_add_partition:394 factory bad addr=3ff
[ 2.779283@1] Creating 6 MTD partitions on "nandnormal":
[ 2.779331@1] 0x000000800000-0x000001000000 : "tpl"
[ 2.790939@3] 0x000001000000-0x000001200000 : "misc"
[ 2.794194@1] 0x000001200000-0x000002200000 : "recovery"
[ 2.806344@0] 0x000002200000-0x000004200000 : "boot"
[ 2.825858@0] 0x000004200000-0x000004700000 : "config"
[ 2.830635@0] 0x000004700000-0x000010000000 : "nvdata"
[ 2.861714@0] NAND bbt detect factory Bad block at 7fe0000
[ 2.933309@0] nandnormal initialized ok
[ 2.933419@0] aml_ubootenv_init: register env chardev
[ 2.936940@0] aml_ubootenv_init: register env chardev OK
[ 2.941989@0] amlnf_dtb_init: register dtb cdev
[ 2.946724@0] amlnf_dtb_init: register dtd cdev OK
[ 2.951161@0] mtd_nand_probe 267 , err = 0
[ 2.956343@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 2.961728@0] input: aml_vkeypad as /devices/platform/rtc/input/input0
[ 2.968719@2] unifykey: storage in base: 0xffffffc005000000
[ 2.973350@2] unifykey: storage out base: 0xffffffc005040000
[ 2.978951@2] unifykey: storage block base: 0xffffffc005080000
[ 2.984755@2] unifykey: probe done!
[ 2.988961@2] unifykey: no efuse-version set, use default value: -1
[ 2.994485@2] unifykey: key unify config unifykey-num is 6
[ 3.000096@2] unifykey: key unify fact unifykey-num is 6
[ 3.005218@2] unifykey: unifykey_devno: f200000
[ 3.010222@3] unifykey: device unifykeys created ok
[ 3.014715@3] unifykey: aml_unifykeys_init done!
[ 3.019608@3] sysled: module init
[ 3.023110@3] meson_wdt ffd0f0d0.watchdog: start watchdog
[ 3.027864@3] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[ 3.035272@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[ 3.043980@2] dmc_monitor_probe
[ 3.044875@2] page_trace_module_init, create sysfs failed
[ 3.050693@2] defendkey defendkey: Reserved memory is not enough!
[ 3.055952@2] defendkey: probe of defendkey failed with error -22
[ 3.062309@2] GACT probability NOT on
[ 3.065679@2] Mirror/redirect action on
[ 3.069453@2] u32 classifier
[ 3.072287@2] Actions configured
[ 3.075865@2] Netfilter messages via NETLINK v0.30.
[ 3.081131@2] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
[ 3.087337@2] ctnetlink v0.93: registering with nfnetlink.
[ 3.093174@2] xt_time: kernel timezone is -0000
[ 3.096918@2] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.103590@2] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.108291@2] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 3.113728@2] Initializing XFRM netlink socket
[ 3.119288@2] NET: Registered protocol family 10
[ 3.125239@2] mip6: Mobile IPv6
[ 3.125793@2] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.131811@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.139887@2] NET: Registered protocol family 17
[ 3.142002@2] NET: Registered protocol family 15
[ 3.146642@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.159814@2] l2tp_core: L2TP core driver, V2.0
[ 3.164176@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.169102@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 3.174847@2] l2tp_netlink: L2TP netlink interface
[ 3.179681@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 3.185722@2] l2tp_debugfs: L2TP debugfs support
[ 3.190245@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 3.196913@2] NET: Registered protocol family 35
[ 3.201840@2] Key type dns_resolver registered
[ 3.206417@2] Registered swp emulation handler
[ 3.210372@2] Registered cp15_barrier emulation handler
[ 3.215543@2] Registered setend emulation handler
[ 3.220223@2] disable EAS feature
[ 3.224917@3] registered taskstats version 1
[ 3.241918@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[ 3.748448@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.748536@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.756870@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x02010010
[ 3.765262@2] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
[ 3.772785@1] hub 1-0:1.0: USB hub found
[ 3.775150@1] hub 1-0:1.0: 1 port detected
[ 3.779888@1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.784834@1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.792746@1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.802248@2] hub 2-0:1.0: USB hub found
[ 3.804827@2] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.812115@2] usb usb2: Unsupported the hub
[ 3.816882@2] aml_vrtc rtc: setting system clock to 2021-12-29 20:02:24 UTC (1640808144)
[ 3.824957@2] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc00e1a3000)
[ 3.825033@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[ 3.832939@2] dwc_otg ff400000.dwc2_a: base=0xffffff8008580000
[ 3.832952@2] dwc_otg ff400000.dwc2_a: dwc_otg_device=0xffffffc00c3ab600
[ 3.933393@1] dwc_otg: Core Release: 3.10a
[ 3.933451@1] dwc_otg: Setting default values for core params
[ 3.937639@1] dwc_otg: curmode: 0, host_only: 0
[ 3.942148@1] dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[ 3.954691@1] dwc_otg: Using Buffer DMA mode
[ 3.954729@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 3.958637@1] dwc_otg: Working on port type = SLAVE
[ 3.963494@1] dwc_otg: Dedicated Tx FIFOs mode
[ 3.970590@0] thermal thermal_zone0: binding zone soc_thermal with cdev thermal-cpufreq-0 failed:-22
[ 3.977212@0] cpucore_cooling_register, max_cpu_core_num:4
[ 3.989813@0] gxbb_pm: enter meson_pm_probe!
[ 3.989869@0] no vddio3v3_en pin
[ 3.991517@0] pm-meson aml_pm: Can't get switch_clk81
[ 3.996648@0] gxbb_pm: meson_pm_probe done
[ 4.001559@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.007938@0] Freeing unused kernel memory: 3648K
[ 4.023097@0] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 4.281826@2] ubi0: attaching mtd5
[ 4.300725@2] ubi0: scanning is finished
[ 4.305349@2] ubi0: attached mtd5 (name "config", size 5 MiB)
[ 4.305477@2] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.312537@2] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.319454@2] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.326550@2] ubi0: good PEBs: 40, bad PEBs: 0, corrupted PEBs: 0
[ 4.332622@2] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 4.339981@2] ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 1929412561
[ 4.349261@2] ubi0: available PEBs: 0, total reserved PEBs: 40, PEBs reserved for bad PEB handling: 4
[ 4.358461@3] ubi0: background thread "ubi_bgt0d" started, PID 1076
[ 4.371725@2] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1080
[ 4.409658@1] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
[ 4.412088@1] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 4.422116@1] UBIFS (ubi0:0): FS size: 2793472 bytes (2 MiB, 22 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 4.432334@1] UBIFS (ubi0:0): reserved for root: 131942 bytes (128 KiB)
[ 4.438922@1] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 6FC5229C-4866-4B92-B42B-5491106989DF, small LPT model
[ 4.463729@2] ubi2: attaching mtd6
[ 4.673091@2] NAND bbt detect factory Bad block at 7fe0000
[ 5.143234@2] ubi2: scanning is finished
[ 5.150453@2] ubi2: attached mtd6 (name "nvdata", size 185 MiB)
[ 5.150754@2] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 5.157808@2] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 5.164729@2] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 5.171824@2] ubi2: good PEBs: 1479, bad PEBs: 1, corrupted PEBs: 0
[ 5.178071@2] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 5.185432@2] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2603558039
[ 5.194712@2] ubi2: available PEBs: 0, total reserved PEBs: 1479, PEBs reserved for bad PEB handling: 3
[ 5.204089@3] ubi2: background thread "ubi_bgt2d" started, PID 1088
[ 5.217419@1] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 1092
[ 5.249967@0] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "nvdata_data"
[ 5.252414@0] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 5.262424@0] UBIFS (ubi2:0): FS size: 185384960 bytes (176 MiB, 1460 LEBs), journal size 9269248 bytes (8 MiB, 73 LEBs)
[ 5.273259@0] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB)
[ 5.280014@0] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID E385CDEE-0F47-4349-B466-78F7D3A5F35B, small LPT model
[ 5.501093@0] eth0: device MAC address 02:15:f5:c6:77:f0
[ 5.584569@2] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 5.585861@2] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.804022@1] uart_trans: loading out-of-tree module taints kernel.
[ 5.806304@1] register uart_trans chrdev success.
[ 5.809951@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 0 to 9600
[ 5.817503@1] tty port open success [/dev/ttyS3]!
[ 5.822045@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 9600 to 115200
[ 5.830453@1] init sucess for tty struct (246:3) [/dev/ttyS3]
[ 5.836582@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 0 to 9600
[ 5.844232@1] tty port open success [/dev/ttyS2]!
[ 5.848898@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 9600 to 115200
[ 5.857311@1] init sucess for tty struct (246:2) [/dev/ttyS2]
[ 5.863404@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 5.871101@1] tty port open success [/dev/ttyS1]!
[ 5.875765@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 5.884171@1] init sucess for tty struct (246:1) [/dev/ttyS1]
[ 5.890514@2] create workqueue success!
[ 7.635974@2] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 7.639265@2] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.016235@0] uart trans dev open.
[ 19.016346@0] uart_buf virt addr = 0xffffffc00bd00000
[ 19.019128@0] uart_buf phys addr = 0x0bd00000
[ 19.023483@0] uart_buf pfn = 0x0000bd00
[ 19.028151@0] uart trans stop send work timer.
[ 19.032435@0] uart trans set chain exist bits:0x7.
[ 19.037012@0] uart trans set work queue count 768.
[ 59.082195@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 69.058524@2] uart set baud to: 4098
[ 69.058584@2] uart set baud to: 4098
[ 69.060185@1] uart set baud to: 4098
[ 109.436314@1] meson_uart ff804000.serial: ttyS3 use xtal(24M) 24000000 change 115200 to 3000000
[ 109.439395@1] uart set baud to: 4109
[ 109.503288@1] meson_uart ffd23000.serial: ttyS2 use xtal(24M) 24000000 change 115200 to 3000000
[ 109.506416@1] uart set baud to: 4109
[ 109.570471@2] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 3000000
[ 109.573612@2] uart set baud to: 4109
[ 147.441360@1] uart trans start send work timer.
[ 177.187688@1] hrtimer: interrupt took 49542 ns
===========================================Miner log===========================================
2021-12-29 20:02:31 Miner compile time: Wed Oct 20 17:50:59 CST 2021 type: Antminer S19
2021-12-29 20:02:32 This is fix-freq version
2021-12-29 20:02:32 Miner compile time: Wed Oct 20 17:50:59 CST 2021 type: Antminer S19
2021-12-29 20:02:32 commit version: ce69be1 2021-10-19 19:57:55, build by: jenkins 2021-10-20 18:33:58
2021-12-29 20:02:32 opt_multi_version = 1
2021-12-29 20:02:32 opt_bitmain_ab = 1
2021-12-29 20:02:32 mid_auto_gen = 1
2021-12-29 20:02:32 opt_bitmain_work_mode = 0
2021-12-29 20:02:32 port 439 already exported
2021-12-29 20:02:32 port 454 already exported
2021-12-29 20:02:32 port 440 already exported
2021-12-29 20:02:32 port 455 already exported
2021-12-29 20:02:32 port 441 already exported
2021-12-29 20:02:32 port 456 already exported
2021-12-29 20:02:32 port 438 already exported
2021-12-29 20:02:32 port 453 already exported
2021-12-29 20:02:32 port 446 already exported
2021-12-29 20:02:32 port 445 already exported
2021-12-29 20:02:32 Note: front fan is power on!
2021-12-29 20:02:32 Note: rear fan is power on!
2021-12-29 20:02:32 start the http log.
2021-12-29 20:02:32 httpListenThread start ret=0
2021-12-29 20:02:32 start listen on 6060 ...
2021-12-29 20:02:32 load machine BHB42801 conf
2021-12-29 20:02:32 machine : BHB42801
2021-12-29 20:02:32 chain_num 4, chain_domain_num 44, chain_asic_num 88, domain_asic_num 2
2021-12-29 20:02:32 bad chain id = 3
2021-12-29 20:02:35 bad chain id = 3
2021-12-29 20:02:37 ==========================capability start==========================
2021-12-29 20:02:37 board num = 3
2021-12-29 20:02:37 board id = 0, chain num = 1
2021-12-29 20:02:37 chain id = 0
2021-12-29 20:02:37 board id = 1, chain num = 1
2021-12-29 20:02:37 chain id = 1
2021-12-29 20:02:37 board id = 2, chain num = 1
2021-12-29 20:02:37 chain id = 2
2021-12-29 20:02:37 ==========================capability end============================
2021-12-29 20:02:37 chain num = 3
2021-12-29 20:02:38 load chain 0 eeprom data
2021-12-29 20:02:39 load chain 1 eeprom data
2021-12-29 20:02:40 load chain 2 eeprom data
2021-12-29 20:02:40 fan_eft : 0 fan_pwm : 100
2021-12-29 20:02:40 create thread get_nonce_and_register_thread
2021-12-29 20:02:40 fixed working voltage = 1580
2021-12-29 20:02:40 Chain [0] PCB Version: 0x0110
2021-12-29 20:02:40 Chain [0] BOM Version: 0x0010
2021-12-29 20:02:40 Chain [1] PCB Version: 0x0110
2021-12-29 20:02:40 Chain [1] BOM Version: 0x0010
2021-12-29 20:02:40 Chain [2] PCB Version: 0x0110
2021-12-29 20:02:40 Chain [2] BOM Version: 0x0010
2021-12-29 20:02:40 bad chain id = 3
2021-12-29 20:02:40 Fan check passed.
2021-12-29 20:02:40 uart_trans addr:0xf6e0b000.
2021-12-29 20:02:41 chain[0] PIC jump to app
2021-12-29 20:02:43 Check chain[0] PIC fw version=0x89
2021-12-29 20:02:44 chain[1] PIC jump to app
2021-12-29 20:02:45 Check chain[1] PIC fw version=0x89
2021-12-29 20:02:46 chain[2] PIC jump to app
2021-12-29 20:02:48 Check chain[2] PIC fw version=0x89
2021-12-29 20:02:48 create thread pic_heart_beat_thread
2021-12-29 20:02:48 max sensor num = 4
2021-12-29 20:02:48 STATUS_INITED: soc init done!
2021-12-29 20:02:48 temperature_monitor_thread start...
2021-12-29 20:02:50 start to init...
2021-12-29 20:02:50 i2c_sim_init start
2021-12-29 20:02:50 init gpio477
2021-12-29 20:02:50 init gpio476
2021-12-29 20:02:50 i2c_sim_init end
2021-12-29 20:02:52 power open power_version = 0x73
2021-12-29 20:02:53 power type version: 0x0073
2021-12-29 20:02:53 Enter sleep to make sure power release finish.
2021-12-29 20:03:24 Slept 30 seconds, diff = 0.
2021-12-29 20:03:25 set_voltage_by_steps to 1700.
2021-12-29 20:03:28 chain avg vol rise to 16.80
2021-12-29 20:03:30 start up min temp by 75a = 26
2021-12-29 20:03:41 Chain[0]: find 88 asic, times 0
2021-12-29 20:03:51 Chain[1]: find 88 asic, times 0
2021-12-29 20:04:01 Chain[2]: find 88 asic, times 0
2021-12-29 20:04:06 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-12-29 20:04:11 min freq in eeprom = 675
2021-12-29 20:04:11 fixed frequency is 675
2021-12-29 20:04:11 Bring up temperature is 26
2021-12-29 20:04:11 set UART baud to 3000000
2021-12-29 20:04:11 create thread check_miner_status_thread
2021-12-29 20:04:11 create thread check_system_work_thread
2021-12-29 20:04:11 set_voltage_by_steps to 1650.
2021-12-29 20:04:13 fixed step freq_start = 50, freq_end = 675, freq_step = 6.25
2021-12-29 20:04:13 chain = 0 set freq to 56.25
2021-12-29 20:04:13 chain = 1 set freq to 56.25
2021-12-29 20:04:13 chain = 2 set freq to 56.25
2021-12-29 20:04:13 chain = 0 set freq to 62.50
2021-12-29 20:04:13 chain = 1 set freq to 62.50
2021-12-29 20:04:13 chain = 2 set freq to 62.50
2021-12-29 20:04:14 chain = 0 set freq to 68.75
2021-12-29 20:04:14 chain = 1 set freq to 68.75
2021-12-29 20:04:14 chain = 2 set freq to 68.75
2021-12-29 20:04:14 chain = 0 set freq to 75.00
2021-12-29 20:04:14 chain = 1 set freq to 75.00
2021-12-29 20:04:14 chain = 2 set freq to 75.00
2021-12-29 20:04:14 chain = 0 set freq to 81.25
2021-12-29 20:04:14 chain = 1 set freq to 81.25
2021-12-29 20:04:14 chain = 2 set freq to 81.25
2021-12-29 20:04:14 chain = 0 set freq to 87.50
2021-12-29 20:04:14 chain = 1 set freq to 87.50
2021-12-29 20:04:14 chain = 2 set freq to 87.50
2021-12-29 20:04:14 chain = 0 set freq to 93.75
2021-12-29 20:04:14 chain = 1 set freq to 93.75
2021-12-29 20:04:14 chain = 2 set freq to 93.75
2021-12-29 20:04:14 chain = 0 set freq to 100.00
2021-12-29 20:04:14 chain = 1 set freq to 100.00
2021-12-29 20:04:14 chain = 2 set freq to 100.00
2021-12-29 20:04:14 chain = 0 set freq to 106.25
2021-12-29 20:04:14 chain = 1 set freq to 106.25
2021-12-29 20:04:14 chain = 2 set freq to 106.25
2021-12-29 20:04:14 chain = 0 set freq to 112.50
2021-12-29 20:04:14 chain = 1 set freq to 112.50
2021-12-29 20:04:14 chain = 2 set freq to 112.50
2021-12-29 20:04:14 chain = 0 set freq to 118.75
2021-12-29 20:04:14 chain = 1 set freq to 118.75
2021-12-29 20:04:14 chain = 2 set freq to 118.75
2021-12-29 20:04:14 chain = 0 set freq to 125.00
2021-12-29 20:04:14 chain = 1 set freq to 125.00
2021-12-29 20:04:14 chain = 2 set freq to 125.00
2021-12-29 20:04:15 chain = 0 set freq to 131.25
2021-12-29 20:04:15 chain = 1 set freq to 131.25
2021-12-29 20:04:15 chain = 2 set freq to 131.25
2021-12-29 20:04:15 chain = 0 set freq to 137.50
2021-12-29 20:04:15 chain = 1 set freq to 137.50
2021-12-29 20:04:15 chain = 2 set freq to 137.50
2021-12-29 20:04:15 chain = 0 set freq to 143.75
2021-12-29 20:04:15 chain = 1 set freq to 143.75
2021-12-29 20:04:15 chain = 2 set freq to 143.75
2021-12-29 20:04:15 chain = 0 set freq to 150.00
2021-12-29 20:04:15 chain = 1 set freq to 150.00
2021-12-29 20:04:15 chain = 2 set freq to 150.00
2021-12-29 20:04:15 chain = 0 set freq to 156.25
2021-12-29 20:04:15 chain = 1 set freq to 156.25
2021-12-29 20:04:15 chain = 2 set freq to 156.25
2021-12-29 20:04:15 chain = 0 set freq to 162.50
2021-12-29 20:04:15 chain = 1 set freq to 162.50
2021-12-29 20:04:15 chain = 2 set freq to 162.50
2021-12-29 20:04:15 chain = 0 set freq to 168.75
2021-12-29 20:04:15 chain = 1 set freq to 168.75
2021-12-29 20:04:15 chain = 2 set freq to 168.75
2021-12-29 20:04:15 chain = 0 set freq to 175.00
2021-12-29 20:04:15 chain = 1 set freq to 175.00
2021-12-29 20:04:15 chain = 2 set freq to 175.00
2021-12-29 20:04:15 chain = 0 set freq to 181.25
2021-12-29 20:04:15 chain = 1 set freq to 181.25
2021-12-29 20:04:15 chain = 2 set freq to 181.25
2021-12-29 20:04:15 chain = 0 set freq to 187.50
2021-12-29 20:04:15 chain = 1 set freq to 187.50
2021-12-29 20:04:15 chain = 2 set freq to 187.50
2021-12-29 20:04:16 chain = 0 set freq to 193.75
2021-12-29 20:04:16 chain = 1 set freq to 193.75
2021-12-29 20:04:16 chain = 2 set freq to 193.75
2021-12-29 20:04:16 chain = 0 set freq to 200.00
2021-12-29 20:04:16 chain = 1 set freq to 200.00
2021-12-29 20:04:16 chain = 2 set freq to 200.00
2021-12-29 20:04:16 chain = 0 set freq to 206.25
2021-12-29 20:04:16 chain = 1 set freq to 206.25
2021-12-29 20:04:16 chain = 2 set freq to 206.25
2021-12-29 20:04:16 chain = 0 set freq to 212.50
2021-12-29 20:04:16 chain = 1 set freq to 212.50
2021-12-29 20:04:16 chain = 2 set freq to 212.50
2021-12-29 20:04:16 chain = 0 set freq to 218.75
2021-12-29 20:04:16 chain = 1 set freq to 218.75
2021-12-29 20:04:16 chain = 2 set freq to 218.75
2021-12-29 20:04:16 chain = 0 set freq to 225.00
2021-12-29 20:04:16 chain = 1 set freq to 225.00
2021-12-29 20:04:16 chain = 2 set freq to 225.00
2021-12-29 20:04:16 chain = 0 set freq to 231.25
2021-12-29 20:04:16 chain = 1 set freq to 231.25
2021-12-29 20:04:16 chain = 2 set freq to 231.25
2021-12-29 20:04:16 chain = 0 set freq to 237.50
2021-12-29 20:04:16 chain = 1 set freq to 237.50
2021-12-29 20:04:16 chain = 2 set freq to 237.50
2021-12-29 20:04:16 chain = 0 set freq to 243.75
2021-12-29 20:04:16 chain = 1 set freq to 243.75
2021-12-29 20:04:16 chain = 2 set freq to 243.75
2021-12-29 20:04:17 chain = 0 set freq to 250.00
2021-12-29 20:04:17 chain = 1 set freq to 250.00
2021-12-29 20:04:17 chain = 2 set freq to 250.00
2021-12-29 20:04:17 chain = 0 set freq to 256.25
2021-12-29 20:04:17 chain = 1 set freq to 256.25
2021-12-29 20:04:17 chain = 2 set freq to 256.25
2021-12-29 20:04:17 chain = 0 set freq to 262.50
2021-12-29 20:04:17 chain = 1 set freq to 262.50
2021-12-29 20:04:17 chain = 2 set freq to 262.50
2021-12-29 20:04:17 chain = 0 set freq to 268.75
2021-12-29 20:04:17 chain = 1 set freq to 268.75
2021-12-29 20:04:17 chain = 2 set freq to 268.75
2021-12-29 20:04:17 chain = 0 set freq to 275.00
2021-12-29 20:04:17 chain = 1 set freq to 275.00
2021-12-29 20:04:17 chain = 2 set freq to 275.00
2021-12-29 20:04:17 chain = 0 set freq to 281.25
2021-12-29 20:04:17 chain = 1 set freq to 281.25
2021-12-29 20:04:17 chain = 2 set freq to 281.25
2021-12-29 20:04:17 chain = 0 set freq to 287.50
2021-12-29 20:04:17 chain = 1 set freq to 287.50
2021-12-29 20:04:17 chain = 2 set freq to 287.50
2021-12-29 20:04:17 chain = 0 set freq to 293.75
2021-12-29 20:04:17 chain = 1 set freq to 293.75
2021-12-29 20:04:17 chain = 2 set freq to 293.75
2021-12-29 20:04:17 chain = 0 set freq to 300.00
2021-12-29 20:04:17 chain = 1 set freq to 300.00
2021-12-29 20:04:17 chain = 2 set freq to 300.00
2021-12-29 20:04:17 chain = 0 set freq to 306.25
2021-12-29 20:04:17 chain = 1 set freq to 306.25
2021-12-29 20:04:17 chain = 2 set freq to 306.25
2021-12-29 20:04:18 chain = 0 set freq to 312.50
2021-12-29 20:04:18 chain = 1 set freq to 312.50
2021-12-29 20:04:18 chain = 2 set freq to 312.50
2021-12-29 20:04:18 chain = 0 set freq to 318.75
2021-12-29 20:04:18 chain = 1 set freq to 318.75
2021-12-29 20:04:18 chain = 2 set freq to 318.75
2021-12-29 20:04:18 chain = 0 set freq to 325.00
2021-12-29 20:04:18 chain = 1 set freq to 325.00
2021-12-29 20:04:18 chain = 2 set freq to 325.00
2021-12-29 20:04:18 chain = 0 set freq to 331.25
2021-12-29 20:04:18 chain = 1 set freq to 331.25
2021-12-29 20:04:18 chain = 2 set freq to 331.25
2021-12-29 20:04:18 chain = 0 set freq to 337.50
2021-12-29 20:04:18 chain = 1 set freq to 337.50
2021-12-29 20:04:18 chain = 2 set freq to 337.50
2021-12-29 20:04:18 chain = 0 set freq to 343.75
2021-12-29 20:04:18 chain = 1 set freq to 343.75
2021-12-29 20:04:18 chain = 2 set freq to 343.75
2021-12-29 20:04:18 chain = 0 set freq to 350.00
2021-12-29 20:04:18 chain = 1 set freq to 350.00
2021-12-29 20:04:18 chain = 2 set freq to 350.00
2021-12-29 20:04:18 chain = 0 set freq to 356.25
2021-12-29 20:04:18 chain = 1 set freq to 356.25
2021-12-29 20:04:18 chain = 2 set freq to 356.25
2021-12-29 20:04:18 chain = 0 set freq to 362.50
2021-12-29 20:04:18 chain = 1 set freq to 362.50
2021-12-29 20:04:18 chain = 2 set freq to 362.50
2021-12-29 20:04:18 chain = 0 set freq to 368.75
2021-12-29 20:04:18 chain = 1 set freq to 368.75
2021-12-29 20:04:18 chain = 2 set freq to 368.75
2021-12-29 20:04:19 chain = 0 set freq to 375.00
2021-12-29 20:04:19 chain = 1 set freq to 375.00
2021-12-29 20:04:19 chain = 2 set freq to 375.00
2021-12-29 20:04:19 chain = 0 set freq to 381.25
2021-12-29 20:04:19 chain = 1 set freq to 381.25
2021-12-29 20:04:19 chain = 2 set freq to 381.25
2021-12-29 20:04:19 chain = 0 set freq to 387.50
2021-12-29 20:04:19 chain = 1 set freq to 387.50
2021-12-29 20:04:19 chain = 2 set freq to 387.50
2021-12-29 20:04:19 chain = 0 set freq to 393.75
2021-12-29 20:04:19 chain = 1 set freq to 393.75
2021-12-29 20:04:19 chain = 2 set freq to 393.75
2021-12-29 20:04:19 chain = 0 set freq to 400.00
2021-12-29 20:04:19 chain = 1 set freq to 400.00
2021-12-29 20:04:19 chain = 2 set freq to 400.00
2021-12-29 20:04:19 chain = 0 set freq to 406.25
2021-12-29 20:04:19 chain = 1 set freq to 406.25
2021-12-29 20:04:19 chain = 2 set freq to 406.25
2021-12-29 20:04:19 chain = 0 set freq to 412.50
2021-12-29 20:04:19 chain = 1 set freq to 412.50
2021-12-29 20:04:19 chain = 2 set freq to 412.50
2021-12-29 20:04:19 chain = 0 set freq to 418.75
2021-12-29 20:04:19 chain = 1 set freq to 418.75
2021-12-29 20:04:19 chain = 2 set freq to 418.75
2021-12-29 20:04:19 chain = 0 set freq to 425.00
2021-12-29 20:04:19 chain = 1 set freq to 425.00
2021-12-29 20:04:19 chain = 2 set freq to 425.00
2021-12-29 20:04:19 chain = 0 set freq to 431.25
2021-12-29 20:04:19 chain = 1 set freq to 431.25
2021-12-29 20:04:19 chain = 2 set freq to 431.25
2021-12-29 20:04:20 chain = 0 set freq to 437.50
2021-12-29 20:04:20 chain = 1 set freq to 437.50
2021-12-29 20:04:20 chain = 2 set freq to 437.50
2021-12-29 20:04:20 chain = 0 set freq to 443.75
2021-12-29 20:04:20 chain = 1 set freq to 443.75
2021-12-29 20:04:20 chain = 2 set freq to 443.75
2021-12-29 20:04:20 chain = 0 set freq to 450.00
2021-12-29 20:04:20 chain = 1 set freq to 450.00
2021-12-29 20:04:20 chain = 2 set freq to 450.00
2021-12-29 20:04:20 chain = 0 set freq to 456.25
2021-12-29 20:04:20 chain = 1 set freq to 456.25
2021-12-29 20:04:20 chain = 2 set freq to 456.25
2021-12-29 20:04:20 chain = 0 set freq to 462.50
2021-12-29 20:04:20 chain = 1 set freq to 462.50
2021-12-29 20:04:20 chain = 2 set freq to 462.50
2021-12-29 20:04:20 chain = 0 set freq to 468.75
2021-12-29 20:04:20 chain = 1 set freq to 468.75
Jump to: