Author

Topic: S19 Pro - one hash board missing on two rigs (Read 61 times)

legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
December 23, 2021, 11:00:49 AM
#3
Both miners have missing ASIC chips that cause the middle hashboard shutdown.

If you bought this new from Bitmain I suggest try to flash it first with the latest version your miner version is currently running nov firmware so upgrading it with the latest one might solve this issue.

If it is still under warranty you can send it back to the manufacturer for repair.
Also if it's 2nd hand unit or not under warranty you can try to replug cables on the middle hashboard then test it again.
hero member
Activity: 544
Merit: 589
December 23, 2021, 09:27:28 AM
#2


Code:
2021-12-22 11:10:47 Chain[0]: find 114 asic, times 0
2021-12-22 11:10:55 Chain[1]: find 51 asic, times 0
2021-12-22 11:11:03 Chain[1]: find 51 asic, times 1
2021-12-22 11:11:11 Chain[1]: find 51 asic, times 2
2021-12-22 11:11:12 Chain 1 only find 51 asic, will power off hash board 1
2021-12-22 11:11:20 Chain[2]: find 114 asic, times 0


Code:
2021-12-22 07:41:49 Chain[0]: find 114 asic, times 0
2021-12-22 07:41:57 Chain[1]: find 92 asic, times 0
2021-12-22 07:42:05 Chain[1]: find 92 asic, times 1
2021-12-22 07:42:13 Chain[1]: find 92 asic, times 2
2021-12-22 07:42:14 Chain 1 only find 92 asic, will power off hash board 1
2021-12-22 07:42:22 Chain[2]: find 114 asic, times 0


Looks chain 1 in both miners have issues and will need repair.

I'm starting to get the feeling that Bitmain has not solved all of the quality control issues that plagued the 17 series...

newbie
Activity: 3
Merit: 1
December 23, 2021, 04:51:58 AM
#1
Two of the S19 Pro rigs in my mining operation are missing one hash board each, here are two logs, please look into it. Thank you!

Rig 1:

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc:
  • 0
  • 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209652K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19724K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
   Build-time adjustment of leaf fanout to 32.
   RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6652K (cd47b000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 119735750
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 431DDB3D-6968-4DD1-9FA2-9828254C298A, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 370857657
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 3A3FBEA1-2417-4950-B6F0-B0FDF15604F2, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Tue Nov 16 19:20:40 CST 2021 type: Antminer S19 Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Tue Nov 16 19:20:40 CST 2021 type: Antminer S19 Pro
1970-01-01 00:00:10 commit version: 386747fa 2021-10-21 19:58:45, build by: jenkins 2021-11-16 19:37:57
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBP1901 conf
1970-01-01 00:00:10 machine : NBP1901
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
2021-12-22 11:09:41 miner ID : 802864893efaa854
2021-12-22 11:09:41 FPGA Version = 0xB031
2021-12-22 11:09:41 HASH_ON_PLUG V9 = 0x7
2021-12-22 11:09:41 ==========================capability start==========================
2021-12-22 11:09:41 board num = 3
2021-12-22 11:09:41 board id = 0, chain num = 1
2021-12-22 11:09:41    chain id = 0
2021-12-22 11:09:41 board id = 1, chain num = 1
2021-12-22 11:09:41    chain id = 1
2021-12-22 11:09:41 board id = 2, chain num = 1
2021-12-22 11:09:41    chain id = 2
2021-12-22 11:09:41 ==========================capability end============================
2021-12-22 11:09:41 chain num = 3
2021-12-22 11:09:43 [chain 0]
2021-12-22 11:09:43 0x0000 11 4A 06 FF E1 22 DD F4   50 9C C0 54 2B 87 E4 4A
2021-12-22 11:09:43 0x0010 00 46 10 58 AC AD 39 A5   1E 60 9C 62 3E D8 18 36
2021-12-22 11:09:43 0x0020 10 11 AC F9 80 AC 9C 02   C3 00 3B 96 5A 73 B6 B9
2021-12-22 11:09:43 0x0030 11 59 4A 4E 55 7C EA B0   69 ED D3 87 69 52 97 DC
2021-12-22 11:09:43 0x0040 6F 51 88 72 EB 9D D0 87   97 77 FF FF FF FF FF FF
2021-12-22 11:09:43 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:43 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:43 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:43 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:43 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:43 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:43 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:43 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:43 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:43 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:43 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-12-22 11:09:43
2021-12-22 11:09:44 [chain 1]
2021-12-22 11:09:44 0x0000 11 4A F6 DF 9B 96 61 51   6E B4 8E A3 4F 10 26 68
2021-12-22 11:09:44 0x0010 9A 5C 0E 94 B7 C9 52 F4   32 80 69 B1 63 D4 3A F4
2021-12-22 11:09:44 0x0020 76 2B 26 9C E9 77 1F 37   CA 99 04 3D 5D C5 BC 13
2021-12-22 11:09:44 0x0030 16 00 C2 06 0E 18 7F 7F   51 FF 5B C5 68 8F 9B 3B
2021-12-22 11:09:44 0x0040 2D 30 FE 68 EE F3 4C 70   83 66 FF FF FF FF FF FF
2021-12-22 11:09:44 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:44 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:44 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:44 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:44 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:44 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:44 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:44 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:44 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:44 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:44 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-12-22 11:09:44
2021-12-22 11:09:46 [chain 2]
2021-12-22 11:09:46 0x0000 11 4A C5 A2 6E 01 66 8E   04 E9 9C 7E 31 32 51 AF
2021-12-22 11:09:46 0x0010 82 98 EE 1B 72 23 9C 38   26 1D 9A DF 77 20 2B DF
2021-12-22 11:09:46 0x0020 A3 DC A2 02 97 F8 98 E7   A8 38 21 01 41 F5 09 D3
2021-12-22 11:09:46 0x0030 67 B0 23 E7 0C 67 F8 31   84 53 0C EF C9 11 6A 18
2021-12-22 11:09:46 0x0040 18 77 88 BC 30 88 74 9E   29 83 FF FF FF FF FF FF
2021-12-22 11:09:46 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:46 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:46 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:46 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:46 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:46 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:46 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:46 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:46 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:46 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 11:09:46 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-12-22 11:09:46
2021-12-22 11:09:46 fan_eft : 0  fan_pwm : 100
2021-12-22 11:09:46 create thread
2021-12-22 11:09:46 fixed working voltage = 1300
2021-12-22 11:09:46 Chain
  • PCB Version: 0x011e
2021-12-22 11:09:46 Chain
  • BOM Version: 0x0100
2021-12-22 11:09:46 Chain [1] PCB Version: 0x011e
2021-12-22 11:09:46 Chain [1] BOM Version: 0x0100
2021-12-22 11:09:46 Chain [2] PCB Version: 0x011e
2021-12-22 11:09:46 Chain [2] BOM Version: 0x0100
2021-12-22 11:09:50 Fan check passed.
2021-12-22 11:09:51 chain[0] PIC jump to app
2021-12-22 11:09:53 Check chain[0] PIC fw version=0x89
2021-12-22 11:09:54 chain[1] PIC jump to app
2021-12-22 11:09:55 Check chain[1] PIC fw version=0x89
2021-12-22 11:09:56 chain[2] PIC jump to app
2021-12-22 11:09:58 Check chain[2] PIC fw version=0x89
2021-12-22 11:09:58 create thread
2021-12-22 11:09:58 max sensor num = 4
2021-12-22 11:09:58 temperature_monitor_thread start...
2021-12-22 11:10:02 power type version: 0x0071
2021-12-22 11:10:02 Enter sleep to make sure power release finish.
2021-12-22 11:10:33 Slept 30 seconds, diff = 1.
2021-12-22 11:10:33 set_voltage_by_steps to 1500.
2021-12-22 11:10:39 start up min temp by 75a = 44
2021-12-22 11:10:39 set UART baud to 115200
2021-12-22 11:10:43 chain avg vol rise to 15.54
2021-12-22 11:10:47 Chain[0]: find 114 asic, times 0
2021-12-22 11:10:55 Chain[1]: find 51 asic, times 0
2021-12-22 11:11:03 Chain[1]: find 51 asic, times 1
2021-12-22 11:11:11 Chain[1]: find 51 asic, times 2
2021-12-22 11:11:12 Chain 1 only find 51 asic, will power off hash board 1
2021-12-22 11:11:20 Chain[2]: find 114 asic, times 0
2021-12-22 11:11:20 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
2021-12-22 11:11:23 min freq in eeprom = 525
2021-12-22 11:11:23 fixed frequency is 525
2021-12-22 11:11:23 Bring up temperature is 44
2021-12-22 11:11:23 set UART baud to 12000000
2021-12-22 11:11:23 set_voltage_by_steps to 1300.
2021-12-22 11:11:31 STATUS_INITED: soc init done!
2021-12-22 11:11:31 create thread
2021-12-22 11:11:31 create thread
2021-12-22 11:11:33 start to init...
2021-12-22 11:11:41 Init done!
2021-12-22 11:11:41 STATUS_OKAY
2021-12-22 11:11:41 start the cached job
2021-12-22 11:11:41 Version num 8
2021-12-22 11:11:41 Mask num 0xe000
2021-12-22 11:11:41 freq = 525, percent = 90, hcn = 12480, timeout = 449
2021-12-22 11:11:41 set_start_time_point total_tv_start_sys=138 total_tv_end_sys=139
2021-12-22 11:12:34 set_voltage_by_steps to 1280.

Rig 2:

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc:
  • 0
  • 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209652K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19724K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
   Build-time adjustment of leaf fanout to 32.
   RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6652K (cd47b000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1916981047
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A5FE8B34-6A1D-4D76-88FF-48ACCA8AD514, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 340437927
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID EC439461-0268-4321-99F7-69B147A7088E, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Tue Nov 16 19:20:40 CST 2021 type: Antminer S19 Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Tue Nov 16 19:20:40 CST 2021 type: Antminer S19 Pro
1970-01-01 00:00:10 commit version: 386747fa 2021-10-21 19:58:45, build by: jenkins 2021-11-16 19:37:57
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBP1901 conf
1970-01-01 00:00:10 machine : NBP1901
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
2021-12-22 07:39:59 miner ID : 802864893efaa85c
2021-12-22 07:39:59 FPGA Version = 0xB031
2021-12-22 07:39:59 HASH_ON_PLUG V9 = 0x7
2021-12-22 07:39:59 ==========================capability start==========================
2021-12-22 07:39:59 board num = 3
2021-12-22 07:39:59 board id = 0, chain num = 1
2021-12-22 07:39:59    chain id = 0
2021-12-22 07:39:59 board id = 1, chain num = 1
2021-12-22 07:39:59    chain id = 1
2021-12-22 07:39:59 board id = 2, chain num = 1
2021-12-22 07:39:59    chain id = 2
2021-12-22 07:39:59 ==========================capability end============================
2021-12-22 07:39:59 chain num = 3
2021-12-22 07:40:01 [chain 0]
2021-12-22 07:40:01 0x0000 11 4A 87 CF 30 BD 31 31   1E 08 16 6D AD BA 96 87
2021-12-22 07:40:01 0x0010 D4 3D 2D BD E1 4C FD 26   86 FD 40 6D 77 FB 20 D7
2021-12-22 07:40:01 0x0020 F7 8A 74 93 0E 49 8C 63   D0 F6 4F 68 C5 2C 39 6B
2021-12-22 07:40:01 0x0030 7A EF 25 63 E0 4A 05 26   86 43 D3 66 E8 8E 25 BD
2021-12-22 07:40:01 0x0040 60 BC 79 CE 6D 9F EF E0   D3 92 FF FF FF FF FF FF
2021-12-22 07:40:01 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:01 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:01 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:01 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:01 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:01 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:01 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:01 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:01 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:01 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:01 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-12-22 07:40:01
2021-12-22 07:40:03 [chain 1]
2021-12-22 07:40:03 0x0000 11 4A B5 79 8C A1 52 B5   3A D5 9C E7 D7 15 0D BF
2021-12-22 07:40:03 0x0010 7C 3E FD 18 A0 3A 98 DA   96 AB 73 04 9B AD 0B 1A
2021-12-22 07:40:03 0x0020 FA D5 CB CF 2D 08 58 C9   49 C9 21 A5 30 E7 FF DC
2021-12-22 07:40:03 0x0030 FE F9 71 74 A2 20 B8 75   DA 62 F3 7E F7 4E FA 1F
2021-12-22 07:40:03 0x0040 1F 86 A3 E3 FD 08 C3 2D   DF 29 FF FF FF FF FF FF
2021-12-22 07:40:03 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:03 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:03 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:03 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:03 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:03 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:03 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:03 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:03 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:03 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:03 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-12-22 07:40:03
2021-12-22 07:40:04 [chain 2]
2021-12-22 07:40:04 0x0000 11 4A 18 DE 72 B2 84 4B   A0 4D 11 FC 11 65 33 19
2021-12-22 07:40:04 0x0010 8D 45 3C 41 FC 19 63 F4   1D 84 C7 C2 48 4F 4D 49
2021-12-22 07:40:04 0x0020 99 65 2D 2F 5E 83 EE 6F   FB 07 21 95 82 AE D7 9E
2021-12-22 07:40:04 0x0030 82 45 50 E3 E5 2C F0 52   63 64 36 F9 5D A7 D4 24
2021-12-22 07:40:04 0x0040 74 07 20 91 81 2D F1 D0   27 EF FF FF FF FF FF FF
2021-12-22 07:40:04 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:04 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:04 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:04 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:04 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:04 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:04 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:04 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:04 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:04 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-12-22 07:40:04 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-12-22 07:40:04
2021-12-22 07:40:04 fan_eft : 0  fan_pwm : 100
2021-12-22 07:40:04 create thread
2021-12-22 07:40:04 fixed working voltage = 1280
2021-12-22 07:40:04 Chain
  • PCB Version: 0x011e
2021-12-22 07:40:04 Chain
  • BOM Version: 0x0100
2021-12-22 07:40:04 Chain [1] PCB Version: 0x011e
2021-12-22 07:40:04 Chain [1] BOM Version: 0x0100
2021-12-22 07:40:04 Chain [2] PCB Version: 0x011e
2021-12-22 07:40:04 Chain [2] BOM Version: 0x0100
2021-12-22 07:40:08 Fan check passed.
2021-12-22 07:40:09 chain[0] PIC jump to app
2021-12-22 07:40:11 Check chain[0] PIC fw version=0x89
2021-12-22 07:40:12 chain[1] PIC jump to app
2021-12-22 07:40:13 Check chain[1] PIC fw version=0x89
2021-12-22 07:40:15 chain[2] PIC jump to app
2021-12-22 07:40:16 Check chain[2] PIC fw version=0x89
2021-12-22 07:40:16 create thread
2021-12-22 07:40:16 max sensor num = 4
2021-12-22 07:40:16 temperature_monitor_thread start...
2021-12-22 07:40:21 power type version: 0x0071
2021-12-22 07:40:21 Enter sleep to make sure power release finish.
2021-12-22 07:41:36 Slept 74 seconds, diff = 5.
2021-12-22 07:41:36 set_voltage_by_steps to 1500.
2021-12-22 07:41:41 start up min temp by 75a = 40
2021-12-22 07:41:41 set UART baud to 115200
2021-12-22 07:41:41 chain avg vol rise to 15.42
2021-12-22 07:41:49 Chain[0]: find 114 asic, times 0
2021-12-22 07:41:57 Chain[1]: find 92 asic, times 0
2021-12-22 07:42:05 Chain[1]: find 92 asic, times 1
2021-12-22 07:42:13 Chain[1]: find 92 asic, times 2
2021-12-22 07:42:14 Chain 1 only find 92 asic, will power off hash board 1
2021-12-22 07:42:22 Chain[2]: find 114 asic, times 0
2021-12-22 07:42:22 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
2021-12-22 07:42:25 min freq in eeprom = 525
2021-12-22 07:42:25 fixed frequency is 525
2021-12-22 07:42:25 Bring up temperature is 40
2021-12-22 07:42:25 set UART baud to 12000000
2021-12-22 07:42:25 set_voltage_by_steps to 1280.
2021-12-22 07:42:32 STATUS_INITED: soc init done!
2021-12-22 07:42:32 create thread
2021-12-22 07:42:32 create thread
2021-12-22 07:42:34 start to init...
2021-12-22 07:42:42 Init done!
2021-12-22 07:42:42 STATUS_OKAY
2021-12-22 07:42:42 start the cached job
2021-12-22 07:42:42 Version num 8
2021-12-22 07:42:42 Mask num 0xe000
2021-12-22 07:42:42 freq = 525, percent = 90, hcn = 12480, timeout = 449
2021-12-22 07:42:43 set_start_time_point total_tv_start_sys=181 total_tv_end_sys=182
2021-12-22 08:21:31 reload pool, need recalculate
2021-12-22 08:21:31 set_start_time_point total_tv_start_sys=2510 total_tv_end_sys=2511
2021-12-22 08:54:10 set_voltage_by_steps to 1260.
2021-12-22 08:54:24 set_voltage_by_steps to 1280.
2021-12-22 08:54:27 power reply the bad crc, crc = 0x01ea, crc_read = 0x4000
2021-12-22 08:54:27 read_back_data[0] = 0x55
2021-12-22 08:54:27 read_back_data[1] = 0xff
2021-12-22 08:54:27 read_back_data[2] = 0xaa
2021-12-22 08:54:27 read_back_data[3] = 0x06
2021-12-22 08:54:27 read_back_data[4] = 0x83
2021-12-22 08:54:27 read_back_data[5] = 0xb7
2021-12-22 08:54:27 read_back_data[6] = 0x00
2021-12-22 08:54:27 read_back_data[7] = 0x40
2021-12-22 08:54:27 Send power cmd(0x83) failed, retry 0
2021-12-22 10:28:03 set_voltage_by_steps to 1260.
2021-12-22 10:28:38 set_voltage_by_steps to 1280.
2021-12-22 10:35:49 set_voltage_by_steps to 1260.
2021-12-22 10:35:54 set_voltage_by_steps to 1280.
2021-12-22 10:35:58 set_voltage_by_steps to 1260.
2021-12-22 10:36:01 set_voltage_by_steps to 1280.
2021-12-22 10:36:06 set_voltage_by_steps to 1260.
2021-12-22 10:36:13 set_voltage_by_steps to 1280.
2021-12-22 10:36:16 set_voltage_by_steps to 1260.
2021-12-22 10:36:23 set_voltage_by_steps to 1280.
2021-12-22 10:36:26 set_voltage_by_steps to 1260.
2021-12-22 10:36:29 set_voltage_by_steps to 1280.
2021-12-22 10:36:32 set_voltage_by_steps to 1260.
2021-12-22 10:36:40 set_voltage_by_steps to 1280.
Jump to: