Bitcoin Forum>Bitcoin>Mining>Mining support
Author

Topic: S19J says network error but I am connecting to it remotely? (Read 104 times)

BitMaxz
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
S19J says network error but I am connecting to it remotely?
January 26, 2023, 04:57:43 PM
#7
Quote from: Raphaeangelo on January 21, 2023, 01:50:59 PM
I have the same issue.

I verified my miner isn't using the same IP as another device. I've set the miner's IP statically. I can log in to the miner (UI means ethernet port works). I've tried 5+ different mining pools (nicehash Foundry etc). I can Ping these mining pools. I'm still getting Fatal Error: network connection lost! What gives!!!

Have you tried to replace the ethernet cable? Do it first and also try to turn off the router and the ISP modem for 5 minutes and turn it on again.

If still doesn't work there is something blocking your miner to connect online like I said changing DNS should fix the issue but if it doesn't work maybe your internet is very slow.

Also, try to use the Bitmain tool that has a tool to scan viruses to make sure your unit is clean. Check the link below
- https://support.bitmain.com/hc/en-us/articles/360036086773-BITMAIN-Antivirus-Software-Instructions

And SD card flashing if still didn't work
- https://support.bitmain.com/hc/en-us/articles/900004391106-Treatment-Method-for-ANTMINER-Anti-virus
Gabrics
full member
Activity: 193
Merit: 121
Just digging around
Re: S19J says network error but I am connecting to it remotely?
January 26, 2023, 03:51:19 PM
#6
Silly question: Have you tried restart?
Most network error goes away that way.

May try factory reset without keeping configuration.
Raphaeangelo
newbie
Activity: 1
Merit: 0
Re: S19J says network error but I am connecting to it remotely?
January 21, 2023, 01:50:59 PM
#5
I have the same issue.

I verified my miner isn't using the same IP as another device. I've set the miner's IP statically. I can log in to the miner (UI means ethernet port works). I've tried 5+ different mining pools (nicehash Foundry etc). I can Ping these mining pools. I'm still getting Fatal Error: network connection lost! What gives!!!

Code:
2023-01-21 17:16:44 temperature.c:1363:process_status_value: Fatal Error: network connection lost!
2023-01-21 17:16:49 temperature.c:1363:process_status_value: Fatal Error: network connection lost!
2023-01-21 17:16:54 temperature.c:1363:process_status_value: Fatal Error: network connection lost!
2023-01-21 17:16:58 temperature.c:1363:process_status_value: Fatal Error: network connection lost!
BitMaxz
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
Re: S19J says network error but I am connecting to it remotely?
September 30, 2021, 12:06:19 PM
#4
Quote from: fezzyy on September 29, 2021, 12:51:18 PM
Hi thanks for the reply, so this miner is in DHCP mode, and from the router it was set up with a static IP from the start, and the port forwarded for web GUI access (hence why I can access it over the internet and get the logs). Note it was working fine for 5+ days until now.

I tried another pool too, no luck, still same issue.

Well yes, you can still access the dashboard even there are two devices that use the same IP but not everything will work correctly based on my experienced.

Static IP from the router is not a problem it's only pointing to your ISP modem. From your miner try to change the DHCP mode to static and change the IP.
Sample the DHCP mode choose 192.168.1.10 then replace it with 192.168.1.99 on static mode.

Then test it again.

If you don't believe that it's not a network problem then try to flash it first with the latest firmware from Bitmain here and then test it if it is just a software issue but if it doesn't work well it's related to the network issue.
fezzyy
newbie
Activity: 2
Merit: 0
Re: S19J says network error but I am connecting to it remotely?
September 29, 2021, 12:51:18 PM
#3
Quote from: BitMaxz on September 29, 2021, 12:48:35 PM
It might have an IP address conflict or there is another device on the same network use the same IP?

Are this miner is set to DHCP mode?

Can you try to mine on another pool it might be because of the pool server that you currently use?

You can try ViaBTC or another pool listed here https://miningpoolstats.stream/bitcoin

Hi thanks for the reply, so this miner is in DHCP mode, and from the router it was set up with a static IP from the start, and the port forwarded for web GUI access (hence why I can access it over the internet and get the logs). Note it was working fine for 5+ days until now.

I tried another pool too, no luck, still same issue.
BitMaxz
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
Re: S19J says network error but I am connecting to it remotely?
September 29, 2021, 12:48:35 PM
#2
It might have an IP address conflict or there is another device on the same network use the same IP?

Are this miner is set to DHCP mode?

Can you try to mine on another pool it might be because of the pool server that you currently use?

You can try ViaBTC or another pool listed here https://miningpoolstats.stream/bitcoin
fezzyy
newbie
Activity: 2
Merit: 0
Re: S19J says network error but I am connecting to it remotely?
September 29, 2021, 11:28:49 AM
#1
Have an S19J hosted remotely with a friend. It was running for 5+ days smoothly until earlier, the logs show this, at the end is the Network error:

Code:
2021-09-29 13:46:59 30m avg rate is 101767.40 in 30 mins
2021-09-29 13:52:10 set_voltage_by_steps to 1404.
2021-09-29 13:52:12 vol->1404
2021-09-29 13:52:37 set_voltage_by_steps to 1416.
2021-09-29 13:52:40 vol->1416
2021-09-29 13:54:19 set_voltage_by_steps to 1428.
2021-09-29 13:54:21 vol->1428
2021-09-29 14:02:00 chain 0 hash rate 10672.00 low in 15 mins
2021-09-29 14:02:00 chain 1 hash rate 10701.00 low in 15 mins
2021-09-29 14:02:00 chain 2 hash rate 10877.00 low in 15 mins
2021-09-29 14:13:52 Miner compile time: Mon May 31 09:33:45 CST 2021 type: Antminer S19j Pro
2021-09-29 14:13:53 This is fix-freq version
2021-09-29 14:13:53 Miner compile time: Mon May 31 09:33:45 CST 2021 type: Antminer S19j Pro
2021-09-29 14:13:53 commit version: 8349853 2021-05-30 17:08:01, build by: jenkins 2021-05-31 09:33:44
2021-09-29 14:13:53 opt_multi_version     = 1
2021-09-29 14:13:53 opt_bitmain_ab        = 1
2021-09-29 14:13:53 mid_auto_gen          = 0
2021-09-29 14:13:53 opt_bitmain_work_mode = 1
2021-09-29 14:13:53 mmap fpga_mem_addr_hal = 0xb5900000
2021-09-29 14:13:53 HASH_ON_PLUG V9 = 0x7
2021-09-29 14:13:53 Note: front fan is power on!
2021-09-29 14:13:53 Note: rear fan is power on!
2021-09-29 14:13:53 start the http log.
2021-09-29 14:13:53 httpListenThread start ret=0
2021-09-29 14:13:53 start listen on 6060 ...
2021-09-29 14:13:53 load machine BHB42601 conf
2021-09-29 14:13:53 machine : BHB42601
2021-09-29 14:13:53 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2021-09-29 14:13:59 miner ID : 8062754675104814
2021-09-29 14:13:59 FPGA Version = 0xB031
2021-09-29 14:13:59 HASH_ON_PLUG V9 = 0x7
2021-09-29 14:13:59 ==========================capability start==========================
2021-09-29 14:13:59 board num = 3
2021-09-29 14:13:59 board id = 0, chain num = 1
2021-09-29 14:13:59 chain id = 0
2021-09-29 14:13:59 board id = 1, chain num = 1
2021-09-29 14:13:59 chain id = 1
2021-09-29 14:13:59 board id = 2, chain num = 1
2021-09-29 14:13:59 chain id = 2
2021-09-29 14:13:59 ==========================capability end============================
2021-09-29 14:13:59 chain num = 3
2021-09-29 14:14:01 load chain 0 eeprom data
2021-09-29 14:14:01 board_info_version = 4
2021-09-29 14:14:01 algorithm_and_key_version = 0x11
2021-09-29 14:14:01 board_sn = HQDZYN3BAJEBD00HD
2021-09-29 14:14:01 chip_die = ED
2021-09-29 14:14:01 chip_marking = S1C021AV07
2021-09-29 14:14:01 chip_bin = 2
2021-09-29 14:14:01 ft_version = F1V04B2C1
2021-09-29 14:14:01 pcb_version = 0x100
2021-09-29 14:14:01 bom_version = 0x10
2021-09-29 14:14:01 asic_sensor_type = 0x0
2021-09-29 14:14:01 asic_sensor_addr[0] = 0x0
2021-09-29 14:14:01 asic_sensor_addr[1] = 0x0
2021-09-29 14:14:01 asic_sensor_addr[2] = 0x0
2021-09-29 14:14:01 asic_sensor_addr[3] = 0x0
2021-09-29 14:14:01 pic_sensor_type = 0x8b
2021-09-29 14:14:01 pic_sensor_addr = 0xf
2021-09-29 14:14:01 chip_tech = AA
2021-09-29 14:14:01 board_name = BHB42601
2021-09-29 14:14:01 factory_job = 20210601003-ZB
2021-09-29 14:14:01 board_info_crc = 0x1
2021-09-29 14:14:01 voltage = 1380
2021-09-29 14:14:01 frequency = 525
2021-09-29 14:14:01 nonce_rate = 9998
2021-09-29 14:14:01 pcb_temp_in = 27
2021-09-29 14:14:01 pcb_temp_out = 31
2021-09-29 14:14:01 test_version = 1
2021-09-29 14:14:01 test_standard = 0
2021-09-29 14:14:01 param_info_crc = 0x5
2021-09-29 14:14:01 pt1_result = 1
2021-09-29 14:14:01 pt1_count = 1
2021-09-29 14:14:01 pt2_result = 1
2021-09-29 14:14:01 pt2_count = 1
2021-09-29 14:14:03 load chain 1 eeprom data
2021-09-29 14:14:03 board_info_version = 4
2021-09-29 14:14:03 algorithm_and_key_version = 0x11
2021-09-29 14:14:03 board_sn = HQDZYN3BAJEBD00HF
2021-09-29 14:14:03 chip_die = ED
2021-09-29 14:14:03 chip_marking = S1C021AV07
2021-09-29 14:14:03 chip_bin = 2
2021-09-29 14:14:03 ft_version = F1V04B2C1
2021-09-29 14:14:03 pcb_version = 0x100
2021-09-29 14:14:03 bom_version = 0x10
2021-09-29 14:14:03 asic_sensor_type = 0x0
2021-09-29 14:14:03 asic_sensor_addr[0] = 0x0
2021-09-29 14:14:03 asic_sensor_addr[1] = 0x0
2021-09-29 14:14:03 asic_sensor_addr[2] = 0x0
2021-09-29 14:14:03 asic_sensor_addr[3] = 0x0
2021-09-29 14:14:03 pic_sensor_type = 0x8b
2021-09-29 14:14:03 pic_sensor_addr = 0xf
2021-09-29 14:14:03 chip_tech = AA
2021-09-29 14:14:03 board_name = BHB42601
2021-09-29 14:14:03 factory_job = 20210601003-ZB
2021-09-29 14:14:03 board_info_crc = 0x10
2021-09-29 14:14:03 voltage = 1380
2021-09-29 14:14:03 frequency = 525
2021-09-29 14:14:03 nonce_rate = 9999
2021-09-29 14:14:03 pcb_temp_in = 27
2021-09-29 14:14:03 pcb_temp_out = 31
2021-09-29 14:14:03 test_version = 1
2021-09-29 14:14:03 test_standard = 0
2021-09-29 14:14:03 param_info_crc = 0xa
2021-09-29 14:14:03 pt1_result = 1
2021-09-29 14:14:03 pt1_count = 1
2021-09-29 14:14:03 pt2_result = 1
2021-09-29 14:14:03 pt2_count = 1
2021-09-29 14:14:04 load chain 2 eeprom data
2021-09-29 14:14:04 board_info_version = 4
2021-09-29 14:14:04 algorithm_and_key_version = 0x11
2021-09-29 14:14:04 board_sn = HQDZYN3BAJEBD020R
2021-09-29 14:14:04 chip_die = ED
2021-09-29 14:14:04 chip_marking = S1C021AT08
2021-09-29 14:14:04 chip_bin = 2
2021-09-29 14:14:04 ft_version = F1V04B3C2
2021-09-29 14:14:04 pcb_version = 0x100
2021-09-29 14:14:04 bom_version = 0x10
2021-09-29 14:14:04 asic_sensor_type = 0x0
2021-09-29 14:14:04 asic_sensor_addr[0] = 0x0
2021-09-29 14:14:04 asic_sensor_addr[1] = 0x0
2021-09-29 14:14:04 asic_sensor_addr[2] = 0x0
2021-09-29 14:14:04 asic_sensor_addr[3] = 0x0
2021-09-29 14:14:04 pic_sensor_type = 0x8b
2021-09-29 14:14:04 pic_sensor_addr = 0xf
2021-09-29 14:14:04 chip_tech = AA
2021-09-29 14:14:04 board_name = BHB42601
2021-09-29 14:14:04 factory_job = 20210601003-ZB
2021-09-29 14:14:04 board_info_crc = 0x15
2021-09-29 14:14:04 voltage = 1380
2021-09-29 14:14:04 frequency = 525
2021-09-29 14:14:04 nonce_rate = 9998
2021-09-29 14:14:04 pcb_temp_in = 27
2021-09-29 14:14:04 pcb_temp_out = 27
2021-09-29 14:14:04 test_version = 1
2021-09-29 14:14:04 test_standard = 0
2021-09-29 14:14:04 param_info_crc = 0x7
2021-09-29 14:14:04 pt1_result = 1
2021-09-29 14:14:04 pt1_count = 1
2021-09-29 14:14:04 pt2_result = 1
2021-09-29 14:14:04 pt2_count = 1
2021-09-29 14:14:04 fan_eft : 0  fan_pwm : 100
2021-09-29 14:14:04 create thread get_nonce_and_register_thread
2021-09-29 14:14:04 fixed working voltage = 1380
2021-09-29 14:14:04 Chain [0] PCB Version: 0x0100
2021-09-29 14:14:04 Chain [0] BOM Version: 0x0010
2021-09-29 14:14:04 Chain [1] PCB Version: 0x0100
2021-09-29 14:14:04 Chain [1] BOM Version: 0x0010
2021-09-29 14:14:04 Chain [2] PCB Version: 0x0100
2021-09-29 14:14:04 Chain [2] BOM Version: 0x0010
2021-09-29 14:14:06 Fan check passed.
2021-09-29 14:14:07 chain[0] PIC jump to app
2021-09-29 14:14:09 Check chain[0] PIC fw version=0x89
2021-09-29 14:14:10 chain[1] PIC jump to app
2021-09-29 14:14:11 Check chain[1] PIC fw version=0x89
2021-09-29 14:14:13 chain[2] PIC jump to app
2021-09-29 14:14:14 Check chain[2] PIC fw version=0x89
2021-09-29 14:14:14 create thread pic_heart_beat_thread
2021-09-29 14:14:14 max sensor num = 4
2021-09-29 14:14:14 temperature_monitor_thread start...
2021-09-29 14:14:19 power type version: 0x0071
2021-09-29 14:14:19 Enter sleep to make sure power release finish.
2021-09-29 14:14:33 chain avg vol drop to 1.14
2021-09-29 14:14:53 Slept 33 seconds, diff = 5.
2021-09-29 14:14:54 set_voltage_by_steps to 1500.
2021-09-29 14:14:56 vol->1500
2021-09-29 14:15:00 start up min temp by 75a = 17
2021-09-29 14:15:00 set UART baud to 115200
2021-09-29 14:15:00 chain avg vol rise to 15.44
2021-09-29 14:15:10 Chain[0]: find 126 asic, times 0
2021-09-29 14:15:20 Chain[1]: find 126 asic, times 0
2021-09-29 14:15:30 Chain[2]: find 126 asic, times 0
2021-09-29 14:15:35 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-09-29 14:15:40 min freq in eeprom = 525
2021-09-29 14:15:40 fixed frequency is 525
2021-09-29 14:15:43 Bring up temperature is 18
2021-09-29 14:15:43 set UART baud to 12000000
2021-09-29 14:15:43 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-09-29 14:15:43 start do_core_reset
2021-09-29 14:15:52 chain avg vol drop to 1.13
2021-09-29 14:16:04 end do_core_reset
2021-09-29 14:16:04 STATUS_INITED: soc init done!
2021-09-29 14:16:04 create thread check_miner_status_thread
2021-09-29 14:16:04 create thread check_system_work_thread
2021-09-29 14:18:15 ****power off hashboard****
2021-09-29 14:18:20 Miner compile time: Mon May 31 09:33:45 CST 2021 type: Antminer S19j Pro
2021-09-29 14:18:21 This is fix-freq version
2021-09-29 14:18:21 Miner compile time: Mon May 31 09:33:45 CST 2021 type: Antminer S19j Pro
2021-09-29 14:18:21 commit version: 8349853 2021-05-30 17:08:01, build by: jenkins 2021-05-31 09:33:44
2021-09-29 14:18:21 opt_multi_version     = 1
2021-09-29 14:18:21 opt_bitmain_ab        = 1
2021-09-29 14:18:21 mid_auto_gen          = 0
2021-09-29 14:18:21 opt_bitmain_work_mode = 0
2021-09-29 14:18:21 mmap fpga_mem_addr_hal = 0xb5900000
2021-09-29 14:18:21 HASH_ON_PLUG V9 = 0x7
2021-09-29 14:18:21 Note: front fan is power on!
2021-09-29 14:18:21 Note: rear fan is power on!
2021-09-29 14:18:21 start the http log.
2021-09-29 14:18:21 httpListenThread start ret=0
2021-09-29 14:18:21 start listen on 6060 ...
2021-09-29 14:18:21 load machine BHB42601 conf
2021-09-29 14:18:21 machine : BHB42601
2021-09-29 14:18:21 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2021-09-29 14:18:27 miner ID : 8062754675104814
2021-09-29 14:18:27 FPGA Version = 0xB031
2021-09-29 14:18:27 HASH_ON_PLUG V9 = 0x7
2021-09-29 14:18:27 ==========================capability start==========================
2021-09-29 14:18:27 board num = 3
2021-09-29 14:18:27 board id = 0, chain num = 1
2021-09-29 14:18:27 chain id = 0
2021-09-29 14:18:27 board id = 1, chain num = 1
2021-09-29 14:18:27 chain id = 1
2021-09-29 14:18:27 board id = 2, chain num = 1
2021-09-29 14:18:27 chain id = 2
2021-09-29 14:18:27 ==========================capability end============================
2021-09-29 14:18:27 chain num = 3
2021-09-29 14:18:29 load chain 0 eeprom data
2021-09-29 14:18:29 board_info_version = 4
2021-09-29 14:18:29 algorithm_and_key_version = 0x11
2021-09-29 14:18:29 board_sn = HQDZYN3BAJEBD00HD
2021-09-29 14:18:29 chip_die = ED
2021-09-29 14:18:29 chip_marking = S1C021AV07
2021-09-29 14:18:29 chip_bin = 2
2021-09-29 14:18:29 ft_version = F1V04B2C1
2021-09-29 14:18:29 pcb_version = 0x100
2021-09-29 14:18:29 bom_version = 0x10
2021-09-29 14:18:29 asic_sensor_type = 0x0
2021-09-29 14:18:29 asic_sensor_addr[0] = 0x0
2021-09-29 14:18:29 asic_sensor_addr[1] = 0x0
2021-09-29 14:18:29 asic_sensor_addr[2] = 0x0
2021-09-29 14:18:29 asic_sensor_addr[3] = 0x0
2021-09-29 14:18:29 pic_sensor_type = 0x8b
2021-09-29 14:18:29 pic_sensor_addr = 0xf
2021-09-29 14:18:29 chip_tech = AA
2021-09-29 14:18:29 board_name = BHB42601
2021-09-29 14:18:29 factory_job = 20210601003-ZB
2021-09-29 14:18:29 board_info_crc = 0x1
2021-09-29 14:18:29 voltage = 1380
2021-09-29 14:18:29 frequency = 525
2021-09-29 14:18:29 nonce_rate = 9998
2021-09-29 14:18:29 pcb_temp_in = 27
2021-09-29 14:18:29 pcb_temp_out = 31
2021-09-29 14:18:29 test_version = 1
2021-09-29 14:18:29 test_standard = 0
2021-09-29 14:18:29 param_info_crc = 0x5
2021-09-29 14:18:29 pt1_result = 1
2021-09-29 14:18:29 pt1_count = 1
2021-09-29 14:18:29 pt2_result = 1
2021-09-29 14:18:29 pt2_count = 1
2021-09-29 14:18:31 load chain 1 eeprom data
2021-09-29 14:18:31 board_info_version = 4
2021-09-29 14:18:31 algorithm_and_key_version = 0x11
2021-09-29 14:18:31 board_sn = HQDZYN3BAJEBD00HF
2021-09-29 14:18:31 chip_die = ED
2021-09-29 14:18:31 chip_marking = S1C021AV07
2021-09-29 14:18:31 chip_bin = 2
2021-09-29 14:18:31 ft_version = F1V04B2C1
2021-09-29 14:18:31 pcb_version = 0x100
2021-09-29 14:18:31 bom_version = 0x10
2021-09-29 14:18:31 asic_sensor_type = 0x0
2021-09-29 14:18:31 asic_sensor_addr[0] = 0x0
2021-09-29 14:18:31 asic_sensor_addr[1] = 0x0
2021-09-29 14:18:31 asic_sensor_addr[2] = 0x0
2021-09-29 14:18:31 asic_sensor_addr[3] = 0x0
2021-09-29 14:18:31 pic_sensor_type = 0x8b
2021-09-29 14:18:31 pic_sensor_addr = 0xf
2021-09-29 14:18:31 chip_tech = AA
2021-09-29 14:18:31 board_name = BHB42601
2021-09-29 14:18:31 factory_job = 20210601003-ZB
2021-09-29 14:18:31 board_info_crc = 0x10
2021-09-29 14:18:31 voltage = 1380
2021-09-29 14:18:31 frequency = 525
2021-09-29 14:18:31 nonce_rate = 9999
2021-09-29 14:18:31 pcb_temp_in = 27
2021-09-29 14:18:31 pcb_temp_out = 31
2021-09-29 14:18:31 test_version = 1
2021-09-29 14:18:31 test_standard = 0
2021-09-29 14:18:31 param_info_crc = 0xa
2021-09-29 14:18:31 pt1_result = 1
2021-09-29 14:18:31 pt1_count = 1
2021-09-29 14:18:31 pt2_result = 1
2021-09-29 14:18:31 pt2_count = 1
2021-09-29 14:18:32 load chain 2 eeprom data
2021-09-29 14:18:32 board_info_version = 4
2021-09-29 14:18:32 algorithm_and_key_version = 0x11
2021-09-29 14:18:32 board_sn = HQDZYN3BAJEBD020R
2021-09-29 14:18:32 chip_die = ED
2021-09-29 14:18:32 chip_marking = S1C021AT08
2021-09-29 14:18:32 chip_bin = 2
2021-09-29 14:18:32 ft_version = F1V04B3C2
2021-09-29 14:18:32 pcb_version = 0x100
2021-09-29 14:18:32 bom_version = 0x10
2021-09-29 14:18:32 asic_sensor_type = 0x0
2021-09-29 14:18:32 asic_sensor_addr[0] = 0x0
2021-09-29 14:18:32 asic_sensor_addr[1] = 0x0
2021-09-29 14:18:32 asic_sensor_addr[2] = 0x0
2021-09-29 14:18:32 asic_sensor_addr[3] = 0x0
2021-09-29 14:18:32 pic_sensor_type = 0x8b
2021-09-29 14:18:32 pic_sensor_addr = 0xf
2021-09-29 14:18:32 chip_tech = AA
2021-09-29 14:18:32 board_name = BHB42601
2021-09-29 14:18:32 factory_job = 20210601003-ZB
2021-09-29 14:18:32 board_info_crc = 0x15
2021-09-29 14:18:32 voltage = 1380
2021-09-29 14:18:32 frequency = 525
2021-09-29 14:18:32 nonce_rate = 9998
2021-09-29 14:18:32 pcb_temp_in = 27
2021-09-29 14:18:33 pcb_temp_out = 27
2021-09-29 14:18:33 test_version = 1
2021-09-29 14:18:33 test_standard = 0
2021-09-29 14:18:33 param_info_crc = 0x7
2021-09-29 14:18:33 pt1_result = 1
2021-09-29 14:18:33 pt1_count = 1
2021-09-29 14:18:33 pt2_result = 1
2021-09-29 14:18:33 pt2_count = 1
2021-09-29 14:18:33 fan_eft : 0  fan_pwm : 100
2021-09-29 14:18:33 create thread get_nonce_and_register_thread
2021-09-29 14:18:33 fixed working voltage = 1380
2021-09-29 14:18:33 Chain [0] PCB Version: 0x0100
2021-09-29 14:18:33 Chain [0] BOM Version: 0x0010
2021-09-29 14:18:33 Chain [1] PCB Version: 0x0100
2021-09-29 14:18:33 Chain [1] BOM Version: 0x0010
2021-09-29 14:18:33 Chain [2] PCB Version: 0x0100
2021-09-29 14:18:33 Chain [2] BOM Version: 0x0010
2021-09-29 14:18:37 Fan check passed.
2021-09-29 14:18:37 chain[0] PIC jump to app
2021-09-29 14:18:39 Check chain[0] PIC fw version=0x89
2021-09-29 14:18:40 chain[1] PIC jump to app
2021-09-29 14:18:42 Check chain[1] PIC fw version=0x89
2021-09-29 14:18:43 chain[2] PIC jump to app
2021-09-29 14:18:44 Check chain[2] PIC fw version=0x89
2021-09-29 14:18:45 create thread pic_heart_beat_thread
2021-09-29 14:18:45 max sensor num = 4
2021-09-29 14:18:45 temperature_monitor_thread start...
2021-09-29 14:18:49 power type version: 0x0071
2021-09-29 14:18:49 Enter sleep to make sure power release finish.
2021-09-29 14:19:20 Slept 30 seconds, diff = 1.
2021-09-29 14:19:21 set_voltage_by_steps to 1500.
2021-09-29 14:19:23 vol->1500
2021-09-29 14:19:26 start up min temp by 75a = 17
2021-09-29 14:19:26 set UART baud to 115200
2021-09-29 14:19:29 chain avg vol rise to 15.45
2021-09-29 14:19:36 Chain[0]: find 126 asic, times 0
2021-09-29 14:19:46 Chain[1]: find 126 asic, times 0
2021-09-29 14:19:56 Chain[2]: find 126 asic, times 0
2021-09-29 14:20:01 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-09-29 14:20:06 min freq in eeprom = 525
2021-09-29 14:20:06 fixed frequency is 525
2021-09-29 14:20:06 Bring up temperature is 17
2021-09-29 14:20:06 set UART baud to 12000000
2021-09-29 14:20:06 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-09-29 14:20:06 start do_core_reset
2021-09-29 14:20:27 end do_core_reset
2021-09-29 14:20:27 STATUS_INITED: soc init done!
2021-09-29 14:20:27 create thread check_miner_status_thread
2021-09-29 14:20:27 create thread check_system_work_thread
2021-09-29 14:25:28 WARN_NET_LOST: network connection lost
2021-09-29 14:25:28 will power off in 266 seconds in case not resume
2021-09-29 14:29:22 ****power off hashboard****

Any ideas what might be up?

Remotely rebooting the miner via the web GUI doesn't seem to do anything.... does this button actually work?!
Bitcoin Forum>Bitcoin>Mining>Mining support
Jump to: