Complete Log. Only issue is see is the crc error. Not sure what's causing that. Fell like I need to open it up and check for loose connections
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13+ (jenkins@nomd-nomd-fwc-bj) (gcc version 4.9.4 (Linaro GCC 4.9-2017.01) ) #28 SMP Tue Jun 22 17:32:38 CST 2021
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c05d9000, node_mem_map c0631000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c083e000 s9856 r8192 d14720 u32768
[ 0.000000] pcpu-alloc: s9856 r8192 d14720 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 245448k/245448k available, 16696k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc053f674 (5342 kB)
[ 0.000000] .init : 0xc0540000 - 0xc0571680 ( 198 kB)
[ 0.000000] .data : 0xc0572000 - 0xc05d9ee0 ( 416 kB)
[ 0.000000] .bss : 0xc05d9ee0 - 0xc0630448 ( 346 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000346] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015445] pid_max: default: 32768 minimum: 301
[ 0.015666] Security Framework initialized
[ 0.015759] Mount-cache hash table entries: 512
[ 0.024242] Initializing cgroup subsys cpuacct
[ 0.024274] Initializing cgroup subsys memory
[ 0.024336] Initializing cgroup subsys blkio
[ 0.024468] CPU: Testing write buffer coherency: ok
[ 0.024970] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.025046] Setting up static identity map for 0x8030a500 - 0x8030a54c
[ 0.026412] Brought up 1 CPUs
[ 0.026434] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.027719] devtmpfs: initialized
[ 0.091402] pinctrl core: initialized pinctrl subsystem
[ 0.091654] rstctl core: initialized rstctl subsystem
[ 0.092125] regulator-dummy: no parameters
[ 0.092621] NET: Registered protocol family 16
[ 0.093280] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.102691] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[ 0.102867] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.103917] platform 49000000.edma: alias fck already exists
[ 0.103947] platform 49000000.edma: alias fck already exists
[ 0.103972] platform 49000000.edma: alias fck already exists
[ 0.105085] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.105307] OMAP GPIO hardware version 0.1
[ 0.106634] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.107938] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.109389] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.109911] of_get_named_gpio_flags exited with status 52
[ 0.109941] gpio-rctrl rstctl.3: loaded OK
[ 0.114799] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.118041] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.119942] cpsw.0: No hwaddr in dt. Using 94:e3:6d:ba:0d:2b from efuse
[ 0.128812] bio: create slab at 0
[ 0.140239] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.140527] of_get_named_gpio_flags: can't parse gpios property
[ 0.140754] vmmcsd_fixed: 3300 mV
[ 0.143862] SCSI subsystem initialized
[ 0.145084] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[ 0.145115] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.145345] pps_core: LinuxPPS API ver. 1 registered
[ 0.145362] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.146939] Switching to clocksource gp_timer
[ 0.164115] NET: Registered protocol family 2
[ 0.165170] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.165258] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[ 0.165352] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.165445] TCP: reno registered
[ 0.165471] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.165516] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.165924] NET: Registered protocol family 1
[ 0.166487] RPC: Registered named UNIX socket transport module.
[ 0.166507] RPC: Registered udp transport module.
[ 0.166520] RPC: Registered tcp transport module.
[ 0.166591] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.166976] Trying to unpack rootfs image as initramfs...
[ 1.055765] Freeing initrd memory: 6448K
[ 1.056392] CPU PMU: probing PMU on CPU 0
[ 1.056424] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 1.056940] omap2_mbox_probe: platform not supported
[ 1.060678] VFS: Disk quotas dquot_6.5.2
[ 1.060922] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.062318] NFS: Registering the id_resolver key type
[ 1.062411] Key type id_resolver registered
[ 1.062427] Key type id_legacy registered
[ 1.062492] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.062928] msgmni has been set to 491
[ 1.065768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.065794] io scheduler noop registered
[ 1.065809] io scheduler deadline registered
[ 1.065865] io scheduler cfq registered (default)
[ 1.069560] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.071829] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 1.071854] of_get_named_gpio_flags: can't parse gpios property
[ 1.072130] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 1.693103] console [ttyO0] enabled
[ 1.697369] of_get_named_gpio_flags: can't parse gpios property
[ 1.697624] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[ 1.706085] of_get_named_gpio_flags: can't parse gpios property
[ 1.706309] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[ 1.714700] of_get_named_gpio_flags: can't parse gpios property
[ 1.714915] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[ 1.723351] of_get_named_gpio_flags: can't parse gpios property
[ 1.723569] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[ 1.745468] brd: module loaded
[ 1.755697] loop: module loaded
[ 1.759739] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[ 1.769782] ONFI param page 0 valid
[ 1.773489] ONFI flash detected
[ 1.776816] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64
[ 1.788742] omap2-nand: detected x8 NAND flash
[ 1.793408] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 1.798991] omap2-nand: using custom ecc layout
[ 1.803842] 12 ofpart partitions found on MTD device omap2-nand.0
[ 1.810240] Creating 12 MTD partitions on "omap2-nand.0":
[ 1.815919] 0x000000000000-0x000000020000 : "spl"
[ 1.822561] 0x000000020000-0x000000040000 : "spl_backup1"
[ 1.829900] 0x000000040000-0x000000060000 : "spl_backup2"
[ 1.837259] 0x000000060000-0x000000080000 : "spl_backup3"
[ 1.844585] 0x000000080000-0x000000240000 : "u-boot"
[ 1.852920] 0x000000240000-0x000000260000 : "bootenv"
[ 1.859865] 0x000000260000-0x000000280000 : "fdt"
[ 1.866509] 0x000000280000-0x000000780000 : "kernel"
[ 1.877459] 0x000000800000-0x000001c00000 : "root"
[ 1.901126] 0x000001c00000-0x000001e00000 : "config"
[ 1.909583] 0x000001e00000-0x000002000000 : "sig"
[ 1.917787] 0x000002000000-0x000008000000 : "nvdata"
[ 2.007009] OneNAND driver initializing
[ 2.013425] mousedev: PS/2 mouse device common for all mice
[ 2.021139] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 2.028643] 44e3e000.rtc: already running
[ 2.033149] i2c /dev entries driver
[ 2.037465] pps_ldisc: PPS line discipline registered
[ 2.042953] Driver for 1-wire Dallas network protocol.
[ 2.050164] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 2.057738] cpuidle: using governor ladder
[ 2.062068] cpuidle: using governor menu
[ 2.066644] of_get_named_gpio_flags exited with status 6
[ 2.066661] of_get_named_gpio_flags: can't parse gpios property
[ 2.066676] of_get_named_gpio_flags: can't parse gpios property
[ 2.066711] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 2.073940] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 2.080792] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 2.088004] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 2.095325] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 2.102340] omap_hsmmc mmc.4: pins are not configured from the driver
[ 2.135908] of_get_named_gpio_flags exited with status -517
[ 2.135972] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 2.143755] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.150539] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 2.157760] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 2.165845] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 2.172130] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 2.179314] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 2.187625] nf_conntrack version 0.5.0 (3935 buckets, 15740 max)
[ 2.195102] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.200881] TCP: cubic registered
[ 2.204425] Initializing XFRM netlink socket
[ 2.209064] NET: Registered protocol family 10
[ 2.215170] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.221133] NET: Registered protocol family 17
[ 2.225912] NET: Registered protocol family 15
[ 2.230733] Key type dns_resolver registered
[ 2.235313] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 2.243394] ThumbEE CPU extension supported.
[ 2.247913] Registering SWP/SWPB emulation handler
[ 2.254021] registered taskstats version 1
[ 2.259788] of_get_named_gpio_flags exited with status -517
[ 2.259859] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 2.317019] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 2.323436] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 2.338233] libphy: 4a101000.mdio: probed
[ 2.342578] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 2.352662] of_get_named_gpio_flags exited with status -517
[ 2.352729] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 2.360212] Detected MACID = 94:e3:6d:ba:0d:2b
[ 2.364891] cpsw 4a100000.ethernet: NAPI disabled
[ 2.371891] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 2.381067] cpu0 supply cpu0 not found, using dummy regulator
[ 2.387556] cpufreq_cpu0: failed to scale voltage up: -22
[ 2.393379] cpufreq_cpu0: failed to scale voltage up: -22
[ 2.407083] Freeing init memory: 196K
[ 2.487819] devpts: called with bogus options
[ 2.932519] jffs2: notice: (109) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 5.249239] jffs2: notice: (115) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 5.675216] net eth0: initializing cpsw version 1.12 (0)
[ 5.683512] net eth0: phy found : id is : 0x7c0f1
[ 5.695893] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.758944] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 8.765146] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.265540] register uart_trans chrdev success.
[ 11.270988] tty port open success [/dev/ttyO1]!
[ 11.276039] init sucess for tty struct (249:1) [/dev/ttyO1]
[ 11.282427] tty port open success [/dev/ttyO2]!
[ 11.287894] init sucess for tty struct (249:2) [/dev/ttyO2]
[ 11.294306] tty port open success [/dev/ttyO4]!
[ 11.299292] init sucess for tty struct (249:4) [/dev/ttyO4]
[ 11.305731] tty port open success [/dev/ttyO5]!
[ 11.310647] init sucess for tty struct (249:5) [/dev/ttyO5]
[ 19.725601] uart trans dev open.
[ 19.729278] uart_buf virt addr = 0xccd80000
[ 19.733852] uart_buf phys addr = 0x8cd80000
[ 19.738367] uart_buf pfn = 0x0008cd80
[ 19.744540] uart trans stop send work timer.
[ 19.749531] uart trans set chain exist bits:0x7.
[ 19.754671] uart trans set work queue count 768.
[ 101.768240] uart set baud to: 4098
[ 101.772527] uart set baud to: 4098
[ 101.776367] uart set baud to: 4098
[ 140.862968] uart set baud to: 4109
[ 140.928395] uart set baud to: 4109
[ 140.992614] uart set baud to: 4109
[ 175.096923] uart trans start send work timer.
===========================================Miner log===========================================
2000-01-01 00:00:09 Miner compile time: Tue Jun 22 17:45:49 CST 2021 type: Antminer S19j Pro
2000-01-01 00:00:10 This is fix-freq version
2000-01-01 00:00:10 Miner compile time: Tue Jun 22 17:45:49 CST 2021 type: Antminer S19j Pro
2000-01-01 00:00:10 commit åversion: 93c0f7a 2021-06-22 17:54:06, build by: jenkins 2021-06-22 17:59:34
2000-01-01 00:00:10 opt_multi_version = 1
2000-01-01 00:00:10 opt_bitmain_ab = 1
2000-01-01 00:00:10 mid_auto_gen = 1
2000-01-01 00:00:10 opt_bitmain_work_mode = 0
2000-01-01 00:00:10 port 51 already exported
2000-01-01 00:00:10 port 49 already exported
2000-01-01 00:00:10 port 48 already exported
2000-01-01 00:00:10 port 60 already exported
2000-01-01 00:00:10 port 47 already exported
2000-01-01 00:00:10 port 27 already exported
2000-01-01 00:00:10 port 44 already exported
2000-01-01 00:00:10 port 22 already exported
2000-01-01 00:00:10 no board pluged in socket 44
2000-01-01 00:00:10 port 23 already exported
2000-01-01 00:00:10 port 45 already exported
2000-01-01 00:00:10 port 46 already exported
2000-01-01 00:00:10 port 26 already exported
2000-01-01 00:00:10 Note: front fan is power on!
2000-01-01 00:00:10 Note: rear fan is power on!
2000-01-01 00:00:10 start the http log.
2000-01-01 00:00:10 httpListenThread start ret=0
2000-01-01 00:00:10 start listen on 6060 ...
2000-01-01 00:00:10 load machine BHB42601 conf
2000-01-01 00:00:10 machine : BHB42601
2000-01-01 00:00:10 chain_num 4, chain_domain_num 42, chain_asic_num 126, domain_asic_num 3
2000-01-01 00:00:15 ==========================capability start==========================
2000-01-01 00:00:15 board num = 3
2000-01-01 00:00:15 board id = 0, chain num = 1
2000-01-01 00:00:15 chain id = 0
2000-01-01 00:00:15 board id = 1, chain num = 1
2000-01-01 00:00:15 chain id = 1
2000-01-01 00:00:15 board id = 2, chain num = 1
2000-01-01 00:00:15 chain id = 2
2000-01-01 00:00:15 ==========================capability end============================
2000-01-01 00:00:15 chain num = 3
2000-01-01 00:00:16 load chain 0 eeprom data
2000-01-01 00:00:16 board_info_version = 4
2000-01-01 00:00:16 algorithm_and_key_version = 0x11
2000-01-01 00:00:16 board_sn = FXDZYN3BAJHBA13ZE
2000-01-01 00:00:16 chip_die = ED
2000-01-01 00:00:16 chip_marking = R1C021BH0A
2000-01-01 00:00:16 chip_bin = 5
2000-01-01 00:00:16 ft_version = F1V04B1C1
2000-01-01 00:00:16 pcb_version = 0x130
2000-01-01 00:00:16 bom_version = 0x10
2000-01-01 00:00:16 asic_sensor_type = 0x0
2000-01-01 00:00:16 asic_sensor_addr[0] = 0x0
2000-01-01 00:00:16 asic_sensor_addr[1] = 0x0
2000-01-01 00:00:16 asic_sensor_addr[2] = 0x0
2000-01-01 00:00:16 asic_sensor_addr[3] = 0x0
2000-01-01 00:00:16 pic_sensor_type = 0x8b
2000-01-01 00:00:16 pic_sensor_addr = 0xf
2000-01-01 00:00:16 chip_tech = AC
2000-01-01 00:00:16 board_name = BHB42601
2000-01-01 00:00:16 factory_job = FXDZ20210805003-ZB
2000-01-01 00:00:16 board_info_crc = 0x19
2000-01-01 00:00:16 voltage = 1320
2000-01-01 00:00:16 frequency = 525
2000-01-01 00:00:16 nonce_rate = 9956
2000-01-01 00:00:16 pcb_temp_in = 32
2000-01-01 00:00:16 pcb_temp_out = 34
2000-01-01 00:00:16 test_version = 1
2000-01-01 00:00:16 test_standard = 0
2000-01-01 00:00:16 param_info_crc = 0x1d
2000-01-01 00:00:16 pt1_result = 1
2000-01-01 00:00:16 pt1_count = 2
2000-01-01 00:00:16 pt2_result = 1
2000-01-01 00:00:16 pt2_count = 1
2000-01-01 00:00:17 load chain 1 eeprom data
2000-01-01 00:00:17 board_info_version = 4
2000-01-01 00:00:17 algorithm_and_key_version = 0x11
2000-01-01 00:00:17 board_sn = FXDZYN3BAJHBA0T9Z
2000-01-01 00:00:17 chip_die = ED
2000-01-01 00:00:17 chip_marking = H1C021BD01
2000-01-01 00:00:17 chip_bin = 5
2000-01-01 00:00:17 ft_version = F1V04B1C2
2000-01-01 00:00:17 pcb_version = 0x130
2000-01-01 00:00:17 bom_version = 0x10
2000-01-01 00:00:17 asic_sensor_type = 0x0
2000-01-01 00:00:17 asic_sensor_addr[0] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[1] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[2] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[3] = 0x0
2000-01-01 00:00:17 pic_sensor_type = 0x8b
2000-01-01 00:00:17 pic_sensor_addr = 0xf
2000-01-01 00:00:17 chip_tech = AC
2000-01-01 00:00:17 board_name = BHB42601
2000-01-01 00:00:17 factory_job = FXDZ20210805003-ZB
2000-01-01 00:00:17 board_info_crc = 0x14
2000-01-01 00:00:17 voltage = 1320
2000-01-01 00:00:17 frequency = 525
2000-01-01 00:00:17 nonce_rate = 9995
2000-01-01 00:00:17 pcb_temp_in = 35
2000-01-01 00:00:17 pcb_temp_out = 35
2000-01-01 00:00:17 test_version = 1
2000-01-01 00:00:17 test_standard = 0
2000-01-01 00:00:17 param_info_crc = 0x1b
2000-01-01 00:00:17 pt1_result = 1
2000-01-01 00:00:17 pt1_count = 1
2000-01-01 00:00:17 pt2_result = 1
2000-01-01 00:00:17 pt2_count = 1
2000-01-01 00:00:17 load chain 2 eeprom data
2000-01-01 00:00:17 board_info_version = 4
2000-01-01 00:00:17 algorithm_and_key_version = 0x11
2000-01-01 00:00:17 board_sn = FXDZYN3BAJHBA0GCB
2000-01-01 00:00:17 chip_die = ED
2000-01-01 00:00:17 chip_marking = H1C021BC0A
2000-01-01 00:00:17 chip_bin = 5
2000-01-01 00:00:17 ft_version = F1V04B1C1
2000-01-01 00:00:17 pcb_version = 0x130
2000-01-01 00:00:17 bom_version = 0x10
2000-01-01 00:00:17 asic_sensor_type = 0x0
2000-01-01 00:00:17 asic_sensor_addr[0] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[1] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[2] = 0x0
2000-01-01 00:00:17 asic_sensor_addr[3] = 0x0
2000-01-01 00:00:17 pic_sensor_type = 0x8b
2000-01-01 00:00:17 pic_sensor_addr = 0xf
2000-01-01 00:00:17 chip_tech = AC
2000-01-01 00:00:17 board_name = BHB42601
2000-01-01 00:00:17 factory_job = FXDZ20210805003-ZB
2000-01-01 00:00:17 board_info_crc = 0x19
2000-01-01 00:00:17 voltage = 1320
2000-01-01 00:00:17 frequency = 525
2000-01-01 00:00:17 nonce_rate = 9997
2000-01-01 00:00:17 pcb_temp_in = 34
2000-01-01 00:00:17 pcb_temp_out = 35
2000-01-01 00:00:17 test_version = 1
2000-01-01 00:00:17 test_standard = 0
2000-01-01 00:00:17 param_info_crc = 0x8
2000-01-01 00:00:17 pt1_result = 1
2000-01-01 00:00:17 pt1_count = 2
2000-01-01 00:00:17 pt2_result = 1
2000-01-01 00:00:17 pt2_count = 1
2000-01-01 00:00:17 fan_eft : 0 fan_pwm : 100
2000-01-01 00:00:17 create thread get_nonce_and_register_thread
2000-01-01 00:00:17 fixed working voltage = 1320
2000-01-01 00:00:17 Chain [0] PCB Version: 0x0130
2000-01-01 00:00:17 Chain [0] BOM Version: 0x0010
2000-01-01 00:00:17 Chain [1] PCB Version: 0x0130
2000-01-01 00:00:17 Chain [1] BOM Version: 0x0010
2000-01-01 00:00:17 Chain [2] PCB Version: 0x0130
2000-01-01 00:00:17 Chain [2] BOM Version: 0x0010
2000-01-01 00:00:17 Fan check passed.
2000-01-01 00:00:17 uart_trans addr:0xb6ca6000.
2021-10-30 18:12:04 chain[0] PIC jump to app
2021-10-30 18:12:06 Check chain[0] PIC fw version=0x89
2021-10-30 18:12:07 chain[1] PIC jump to app
2021-10-30 18:12:08 Check chain[1] PIC fw version=0x89
2021-10-30 18:12:10 chain[2] PIC jump to app
2021-10-30 18:12:11 Check chain[2] PIC fw version=0x89
2021-10-30 18:12:11 create thread pic_heart_beat_thread
2021-10-30 18:12:11 max sensor num = 4
2021-10-30 18:12:11 i2c_sim_init start
2021-10-30 18:12:11 temperature_monitor_thread start...
2021-10-30 18:12:11 i2c_sim_init end
2021-10-30 18:12:13 power open power_version = 0x71
2021-10-30 18:12:14 power type version: 0x0071
2021-10-30 18:12:14 Enter sleep to make sure power release finish.
2021-10-30 18:12:25 chain avg vol drop to 0.86
2021-10-30 18:13:20 Slept 65 seconds, diff = 5.
2021-10-30 18:13:21 set_voltage_by_steps to 1500.
2021-10-30 18:13:25 chain avg vol rise to 15.10
2021-10-30 18:13:26 start up min temp by 75a = 25
2021-10-30 18:13:36 Chain[0]: find 126 asic, times 0
2021-10-30 18:13:46 Chain[1]: find 126 asic, times 0
2021-10-30 18:13:55 Chain[2]: find 126 asic, times 0
2021-10-30 18:14:00 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-10-30 18:14:05 min freq in eeprom = 525
2021-10-30 18:14:05 fixed frequency is 525
2021-10-30 18:14:05 Bring up temperature is 25
2021-10-30 18:14:05 set UART baud to 3000000
2021-10-30 18:14:05 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 1
2021-10-30 18:14:05 start do_core_reset
2021-10-30 18:14:24 end do_core_reset
2021-10-30 18:14:24 STATUS_INITED: soc init done!
2021-10-30 18:14:24 create thread check_miner_status_thread
2021-10-30 18:14:24 create thread check_system_work_thread
2021-10-30 18:14:27 start to init...
2021-10-30 18:14:27 set_voltage_by_steps to 1450.
2021-10-30 18:14:29 fixed step freq_start = 50, freq_end = 525, freq_step = 6.25
2021-10-30 18:14:29 chain = 0 set freq to 56.25
2021-10-30 18:14:29 chain = 1 set freq to 56.25
2021-10-30 18:14:29 chain = 2 set freq to 56.25
2021-10-30 18:14:29 chain = 0 set freq to 62.50
2021-10-30 18:14:29 chain = 1 set freq to 62.50
2021-10-30 18:14:29 chain = 2 set freq to 62.50
2021-10-30 18:14:29 chain = 0 set freq to 68.75
2021-10-30 18:14:29 chain = 1 set freq to 68.75
2021-10-30 18:14:29 chain = 2 set freq to 68.75
2021-10-30 18:14:29 chain = 0 set freq to 75.00
2021-10-30 18:14:29 chain = 1 set freq to 75.00
2021-10-30 18:14:29 chain = 2 set freq to 75.00
2021-10-30 18:14:29 chain = 0 set freq to 81.25
2021-10-30 18:14:29 chain = 1 set freq to 81.25
2021-10-30 18:14:29 chain = 2 set freq to 81.25
2021-10-30 18:14:29 chain = 0 set freq to 87.50
2021-10-30 18:14:29 chain = 1 set freq to 87.50
2021-10-30 18:14:29 chain = 2 set freq to 87.50
2021-10-30 18:14:29 chain = 0 set freq to 93.75
2021-10-30 18:14:29 chain = 1 set freq to 93.75
2021-10-30 18:14:29 chain = 2 set freq to 93.75
2021-10-30 18:14:29 chain = 0 set freq to 100.00
2021-10-30 18:14:29 chain = 1 set freq to 100.00
2021-10-30 18:14:29 chain = 2 set freq to 100.00
2021-10-30 18:14:30 chain = 0 set freq to 106.25
2021-10-30 18:14:30 chain = 1 set freq to 106.25
2021-10-30 18:14:30 chain = 2 set freq to 106.25
2021-10-30 18:14:30 chain = 0 set freq to 112.50
2021-10-30 18:14:30 chain = 1 set freq to 112.50
2021-10-30 18:14:30 chain = 2 set freq to 112.50
2021-10-30 18:14:30 chain = 0 set freq to 118.75
2021-10-30 18:14:30 chain = 1 set freq to 118.75
2021-10-30 18:14:30 chain = 2 set freq to 118.75
2021-10-30 18:14:30 chain = 0 set freq to 125.00
2021-10-30 18:14:30 chain = 1 set freq to 125.00
2021-10-30 18:14:30 chain = 2 set freq to 125.00
2021-10-30 18:14:30 chain = 0 set freq to 131.25
2021-10-30 18:14:30 chain = 1 set freq to 131.25
2021-10-30 18:14:30 chain = 2 set freq to 131.25
2021-10-30 18:14:30 chain = 0 set freq to 137.50
2021-10-30 18:14:30 chain = 1 set freq to 137.50
2021-10-30 18:14:30 chain = 2 set freq to 137.50
2021-10-30 18:14:30 chain = 0 set freq to 143.75
2021-10-30 18:14:30 chain = 1 set freq to 143.75
2021-10-30 18:14:30 chain = 2 set freq to 143.75
2021-10-30 18:14:30 chain = 0 set freq to 150.00
2021-10-30 18:14:30 chain = 1 set freq to 150.00
2021-10-30 18:14:30 chain = 2 set freq to 150.00
2021-10-30 18:14:30 chain = 0 set freq to 156.25
2021-10-30 18:14:30 chain = 1 set freq to 156.25
2021-10-30 18:14:30 chain = 2 set freq to 156.25
2021-10-30 18:14:30 chain = 0 set freq to 162.50
2021-10-30 18:14:30 chain = 1 set freq to 162.50
2021-10-30 18:14:30 chain = 2 set freq to 162.50
2021-10-30 18:14:31 chain = 0 set freq to 168.75
2021-10-30 18:14:31 chain = 1 set freq to 168.75
2021-10-30 18:14:31 chain = 2 set freq to 168.75
2021-10-30 18:14:31 chain = 0 set freq to 175.00
2021-10-30 18:14:31 chain = 1 set freq to 175.00
2021-10-30 18:14:31 chain = 2 set freq to 175.00
2021-10-30 18:14:31 chain = 0 set freq to 181.25
2021-10-30 18:14:31 chain = 1 set freq to 181.25
2021-10-30 18:14:31 chain = 2 set freq to 181.25
2021-10-30 18:14:31 chain = 0 set freq to 187.50
2021-10-30 18:14:31 chain = 1 set freq to 187.50
2021-10-30 18:14:31 chain = 2 set freq to 187.50
2021-10-30 18:14:31 chain = 0 set freq to 193.75
2021-10-30 18:14:31 chain = 1 set freq to 193.75
2021-10-30 18:14:31 chain = 2 set freq to 193.75
2021-10-30 18:14:31 chain = 0 set freq to 200.00
2021-10-30 18:14:31 chain = 1 set freq to 200.00
2021-10-30 18:14:31 chain = 2 set freq to 200.00
2021-10-30 18:14:31 chain = 0 set freq to 206.25
2021-10-30 18:14:31 chain = 1 set freq to 206.25
2021-10-30 18:14:31 chain = 2 set freq to 206.25
2021-10-30 18:14:31 chain = 0 set freq to 212.50
2021-10-30 18:14:31 chain = 1 set freq to 212.50
2021-10-30 18:14:31 chain = 2 set freq to 212.50
2021-10-30 18:14:31 chain = 0 set freq to 218.75
2021-10-30 18:14:31 chain = 1 set freq to 218.75
2021-10-30 18:14:31 chain = 2 set freq to 218.75
2021-10-30 18:14:31 chain = 0 set freq to 225.00
2021-10-30 18:14:31 chain = 1 set freq to 225.00
2021-10-30 18:14:31 chain = 2 set freq to 225.00
2021-10-30 18:14:32 chain = 0 set freq to 231.25
2021-10-30 18:14:32 chain = 1 set freq to 231.25
2021-10-30 18:14:32 chain = 2 set freq to 231.25
2021-10-30 18:14:32 chain = 0 set freq to 237.50
2021-10-30 18:14:32 chain = 1 set freq to 237.50
2021-10-30 18:14:32 chain = 2 set freq to 237.50
2021-10-30 18:14:32 chain = 0 set freq to 243.75
2021-10-30 18:14:32 chain = 1 set freq to 243.75
2021-10-30 18:14:32 chain = 2 set freq to 243.75
2021-10-30 18:14:32 chain = 0 set freq to 250.00
2021-10-30 18:14:32 chain = 1 set freq to 250.00
2021-10-30 18:14:32 chain = 2 set freq to 250.00
2021-10-30 18:14:32 chain = 0 set freq to 256.25
2021-10-30 18:14:32 chain = 1 set freq to 256.25
2021-10-30 18:14:32 chain = 2 set freq to 256.25
2021-10-30 18:14:32 chain = 0 set freq to 262.50
2021-10-30 18:14:32 chain = 1 set freq to 262.50
2021-10-30 18:14:32 chain = 2 set freq to 262.50
2021-10-30 18:14:32 chain = 0 set freq to 268.75
2021-10-30 18:14:32 chain = 1 set freq to 268.75
2021-10-30 18:14:32 chain = 2 set freq to 268.75
2021-10-30 18:14:32 chain = 0 set freq to 275.00
2021-10-30 18:14:32 chain = 1 set freq to 275.00
2021-10-30 18:14:32 chain = 2 set freq to 275.00
2021-10-30 18:14:32 chain = 0 set freq to 281.25
2021-10-30 18:14:32 chain = 1 set freq to 281.25
2021-10-30 18:14:32 chain = 2 set freq to 281.25
2021-10-30 18:14:33 chain = 0 set freq to 287.50
2021-10-30 18:14:33 chain = 1 set freq to 287.50
2021-10-30 18:14:33 chain = 2 set freq to 287.50
2021-10-30 18:14:33 chain = 0 set freq to 293.75
2021-10-30 18:14:33 chain = 1 set freq to 293.75
2021-10-30 18:14:33 chain = 2 set freq to 293.75
2021-10-30 18:14:33 chain = 0 set freq to 300.00
2021-10-30 18:14:33 chain = 1 set freq to 300.00
2021-10-30 18:14:33 chain = 2 set freq to 300.00
2021-10-30 18:14:33 chain = 0 set freq to 306.25
2021-10-30 18:14:33 chain = 1 set freq to 306.25
2021-10-30 18:14:33 chain = 2 set freq to 306.25
2021-10-30 18:14:33 chain = 0 set freq to 312.50
2021-10-30 18:14:33 chain = 1 set freq to 312.50
2021-10-30 18:14:33 chain = 2 set freq to 312.50
2021-10-30 18:14:33 chain = 0 set freq to 318.75
2021-10-30 18:14:33 chain = 1 set freq to 318.75
2021-10-30 18:14:33 chain = 2 set freq to 318.75
2021-10-30 18:14:33 chain = 0 set freq to 325.00
2021-10-30 18:14:33 chain = 1 set freq to 325.00
2021-10-30 18:14:33 chain = 2 set freq to 325.00
2021-10-30 18:14:33 chain = 0 set freq to 331.25
2021-10-30 18:14:33 chain = 1 set freq to 331.25
2021-10-30 18:14:33 chain = 2 set freq to 331.25
2021-10-30 18:14:33 chain = 0 set freq to 337.50
2021-10-30 18:14:33 chain = 1 set freq to 337.50
2021-10-30 18:14:33 chain = 2 set freq to 337.50
2021-10-30 18:14:33 chain = 0 set freq to 343.75
2021-10-30 18:14:33 chain = 1 set freq to 343.75
2021-10-30 18:14:33 chain = 2 set freq to 343.75
2021-10-30 18:14:34 chain = 0 set freq to 350.00
2021-10-30 18:14:34 chain = 1 set freq to 350.00
2021-10-30 18:14:34 chain = 2 set freq to 350.00
2021-10-30 18:14:34 chain = 0 set freq to 356.25
2021-10-30 18:14:34 chain = 1 set freq to 356.25
2021-10-30 18:14:34 chain = 2 set freq to 356.25
2021-10-30 18:14:34 chain = 0 set freq to 362.50
2021-10-30 18:14:34 chain = 1 set freq to 362.50
2021-10-30 18:14:34 chain = 2 set freq to 362.50
2021-10-30 18:14:34 chain = 0 set freq to 368.75
2021-10-30 18:14:34 chain = 1 set freq to 368.75
2021-10-30 18:14:34 chain = 2 set freq to 368.75
2021-10-30 18:14:34 chain = 0 set freq to 375.00
2021-10-30 18:14:34 chain = 1 set freq to 375.00
2021-10-30 18:14:34 chain = 2 set freq to 375.00
2021-10-30 18:14:34 chain = 0 set freq to 381.25
2021-10-30 18:14:34 chain = 1 set freq to 381.25
2021-10-30 18:14:34 chain = 2 set freq to 381.25
2021-10-30 18:14:34 chain = 0 set freq to 387.50
2021-10-30 18:14:34 chain = 1 set freq to 387.50
2021-10-30 18:14:34 chain = 2 set freq to 387.50
2021-10-30 18:14:34 chain = 0 set freq to 393.75
2021-10-30 18:14:34 chain = 1 set freq to 393.75
2021-10-30 18:14:34 chain = 2 set freq to 393.75
2021-10-30 18:14:34 chain = 0 set freq to 400.00
2021-10-30 18:14:34 chain = 1 set freq to 400.00
2021-10-30 18:14:34 chain = 2 set freq to 400.00
2021-10-30 18:14:35 chain = 0 set freq to 406.25
2021-10-30 18:14:35 chain = 1 set freq to 406.25
2021-10-30 18:14:35 chain = 2 set freq to 406.25
2021-10-30 18:14:35 chain = 0 set freq to 412.50
2021-10-30 18:14:35 chain = 1 set freq to 412.50
2021-10-30 18:14:35 chain = 2 set freq to 412.50
2021-10-30 18:14:35 chain = 0 set freq to 418.75
2021-10-30 18:14:35 chain = 1 set freq to 418.75
2021-10-30 18:14:35 chain = 2 set freq to 418.75
2021-10-30 18:14:35 chain = 0 set freq to 425.00
2021-10-30 18:14:35 chain = 1 set freq to 425.00
2021-10-30 18:14:35 chain = 2 set freq to 425.00
2021-10-30 18:14:35 chain = 0 set freq to 431.25
2021-10-30 18:14:35 chain = 1 set freq to 431.25
2021-10-30 18:14:35 chain = 2 set freq to 431.25
2021-10-30 18:14:35 chain = 0 set freq to 437.50
2021-10-30 18:14:35 chain = 1 set freq to 437.50
2021-10-30 18:14:35 chain = 2 set freq to 437.50
2021-10-30 18:14:35 chain = 0 set freq to 443.75
2021-10-30 18:14:35 chain = 1 set freq to 443.75
2021-10-30 18:14:35 chain = 2 set freq to 443.75
2021-10-30 18:14:35 chain = 0 set freq to 450.00
2021-10-30 18:14:35 chain = 1 set freq to 450.00
2021-10-30 18:14:35 chain = 2 set freq to 450.00
2021-10-30 18:14:35 chain = 0 set freq to 456.25
2021-10-30 18:14:35 chain = 1 set freq to 456.25
2021-10-30 18:14:35 chain = 2 set freq to 456.25
2021-10-30 18:14:35 chain = 0 set freq to 462.50
2021-10-30 18:14:35 chain = 1 set freq to 462.50
2021-10-30 18:14:35 chain = 2 set freq to 462.50
2021-10-30 18:14:36 chain = 0 set freq to 468.75
2021-10-30 18:14:36 chain = 1 set freq to 468.75
2021-10-30 18:14:36 chain = 2 set freq to 468.75
2021-10-30 18:14:36 chain = 0 set freq to 475.00
2021-10-30 18:14:36 chain = 1 set freq to 475.00
2021-10-30 18:14:36 chain = 2 set freq to 475.00
2021-10-30 18:14:36 chain = 0 set freq to 481.25
2021-10-30 18:14:36 chain = 1 set freq to 481.25
2021-10-30 18:14:36 chain = 2 set freq to 481.25
2021-10-30 18:14:36 chain = 0 set freq to 487.50
2021-10-30 18:14:36 chain = 1 set freq to 487.50
2021-10-30 18:14:36 chain = 2 set freq to 487.50
2021-10-30 18:14:36 chain = 0 set freq to 493.75
2021-10-30 18:14:36 chain = 1 set freq to 493.75
2021-10-30 18:14:36 chain = 2 set freq to 493.75
2021-10-30 18:14:36 chain = 0 set freq to 500.00
2021-10-30 18:14:36 chain = 1 set freq to 500.00
2021-10-30 18:14:36 chain = 2 set freq to 500.00
2021-10-30 18:14:36 chain = 0 set freq to 506.25
2021-10-30 18:14:36 chain = 1 set freq to 506.25
2021-10-30 18:14:36 chain = 2 set freq to 506.25
2021-10-30 18:14:36 chain = 0 set freq to 512.50
2021-10-30 18:14:36 chain = 1 set freq to 512.50
2021-10-30 18:14:36 chain = 2 set freq to 512.50
2021-10-30 18:14:36 chain = 0 set freq to 518.75
2021-10-30 18:14:36 chain = 1 set freq to 518.75
2021-10-30 18:14:36 chain = 2 set freq to 518.75
2021-10-30 18:14:36 chain = 0 set freq to 525.00
2021-10-30 18:14:36 chain = 1 set freq to 525.00
2021-10-30 18:14:36 chain = 2 set freq to 525.00
2021-10-30 18:14:37 set_voltage_by_steps to 1320.
2021-10-30 18:14:39 Init done!
2021-10-30 18:14:39 STATUS_OKAY
2021-10-30 18:14:39 start the cached job
2021-10-30 18:14:39 Version num 65536
2021-10-30 18:14:39 Mask num 0x1fffe000
2021-10-30 18:14:39 opt_multi_version = 65536, interval timeout = 2945120
2021-10-30 18:14:39 freq = 525, percent = 90, hcn = 4993, timeout = 2945120
2021-10-30 18:14:39 set_start_time_point total_tv_start_sys=176 total_tv_end_sys=177
2021-10-30 18:14:39 set_voltage_by_steps to 1350.
2021-10-30 18:15:38 set_voltage_by_steps to 1340.
2021-10-30 18:15:40 set_voltage_by_steps to 1330.
2021-10-30 18:15:42 set_voltage_by_steps to 1320.
2021-10-30 18:15:56 !!! nonce crc error
2021-10-30 18:15:58 !!! nonce crc error
2021-10-30 18:16:00 !!! nonce crc error
2021-10-30 18:16:02 !!! reg crc error
2021-10-30 18:16:03 !!! nonce crc error
2021-10-30 18:16:03 !!! nonce crc error
2021-10-30 18:16:03 !!! nonce crc error
2021-10-30 18:16:06 !!! nonce crc error
2021-10-30 18:16:06 !!! nonce crc error
2021-10-30 18:16:15 !!! nonce crc error
2021-10-30 18:16:18 !!! nonce crc error
2021-10-30 18:16:20 !!! nonce crc error
2021-10-30 18:16:25 !!! nonce crc error
2021-10-30 18:16:27 !!! nonce crc error
2021-10-30 18:16:28 !!! nonce crc error
2021-10-30 18:16:39 !!! nonce crc error
2021-10-30 18:16:43 !!! nonce crc error
2021-10-30 18:16:45 !!! nonce crc error
2021-10-30 18:16:53 !!! nonce crc error
2021-10-30 18:17:02 !!! nonce crc error
2021-10-30 18:17:09 !!! reg crc error
2021-10-30 18:17:10 !!! nonce crc error
2021-10-30 18:17:11 !!! nonce crc error
2021-10-30 18:17:20 !!! nonce crc error
2021-10-30 18:17:30 !!! nonce crc error
2021-10-30 18:17:43 !!! nonce crc error
2021-10-30 18:17:58 !!! nonce crc error
2021-10-30 18:21:04 !!! nonce crc error
2021-10-30 18:21:30 !!! nonce crc error
2021-10-30 18:22:24 !!! nonce crc error
2021-10-30 18:22:24 !!! nonce crc error
2021-10-30 18:22:26 !!! nonce crc error
2021-10-30 18:22:27 !!! nonce crc error
2021-10-30 18:22:28 !!! nonce crc error
2021-10-30 18:22:34 !!! nonce crc error
2021-10-30 18:22:43 !!! nonce crc error
2021-10-30 18:22:43 !!! nonce crc error
2021-10-30 18:22:45 !!! nonce crc error
2021-10-30 18:22:45 !!! nonce crc error
2021-10-30 18:22:45 !!! nonce crc error
2021-10-30 18:22:56 !!! nonce crc error
2021-10-30 18:23:00 !!! reg crc error
2021-10-30 18:23:08 !!! nonce crc error
2021-10-30 18:23:15 !!! nonce crc error
2021-10-30 18:23:25 !!! reg crc error
2021-10-30 18:23:25 !!! nonce crc error
2021-10-30 18:23:28 !!! nonce crc error
2021-10-30 18:23:30 !!! nonce crc error
2021-10-30 18:23:36 !!! nonce crc error
2021-10-30 18:23:36 !!! nonce crc error
2021-10-30 18:23:43 !!! nonce crc error
2021-10-30 18:23:44 !!! nonce crc error
2021-10-30 18:24:09 !!! nonce crc error
2021-10-30 18:24:11 !!! nonce crc error
2021-10-30 18:24:24 !!! nonce crc error
2021-10-30 18:24:26 !!! nonce crc error
2021-10-30 18:24:32 !!! nonce crc error
2021-10-30 18:24:34 !!! nonce crc error
2021-10-30 18:24:35 !!! nonce crc error
2021-10-30 18:24:38 !!! nonce crc error
2021-10-30 18:24:46 !!! nonce crc error
2021-10-30 18:24:49 !!! nonce crc error
2021-10-30 18:24:51 !!! nonce crc error
2021-10-30 18:24:53 !!! nonce crc error
2021-10-30 18:25:07 !!! nonce crc error
2021-10-30 18:25:12 !!! nonce crc error
2021-10-30 18:25:54 !!! nonce crc error
2021-10-30 18:26:00 !!! nonce crc error
2021-10-30 18:26:00 !!! nonce crc error
2021-10-30 18:26:01 !!! nonce crc error
2021-10-30 18:27:13 !!! nonce crc error
2021-10-30 18:27:18 !!! reg crc error
2021-10-30 18:32:46 !!! reg crc error
2021-10-30 18:33:36 !!! nonce crc error
2021-10-30 18:33:49 !!! nonce crc error
2021-10-30 18:34:11 !!! nonce crc error
2021-10-30 18:34:35 !!! nonce crc error
2021-10-30 18:35:31 !!! nonce crc error
2021-10-30 18:35:42 !!! nonce crc error
2021-10-30 18:38:04 !!! nonce crc error
2021-10-30 18:38:04 !!! nonce crc error
2021-10-30 18:38:17 !!! nonce crc error
2021-10-30 18:39:22 !!! nonce crc error
2021-10-30 18:39:57 !!! nonce crc error
2021-10-30 18:41:16 !!! nonce crc error
2021-10-30 18:41:17 !!! nonce crc error