Author

Topic: S19pro online but not hashing! (Read 291 times)

hero member
Activity: 544
Merit: 589
January 23, 2022, 10:17:53 AM
#14
Here is the current log. Can anyone help me understand "ERROR_SOC_INIT: soc init failed!" and why entries like, "Chain x only find 100 asic, will power off hash board x" show up? It doesn't show a power issue. I'm also connected to the internet and the pool, but hashing is just at zero.

It appears like all 3 of your hashboards need repair. "Chain x only find x asic" means the control board isn't able to communicate with all the chips on the hashboard, and it can't operate a partially working board.

newbie
Activity: 2
Merit: 0
January 23, 2022, 09:48:04 AM
#13
Hi all, I'm having a similar issue but with my brand new S19a Pro... it's online but not hashing. There were 10 min where it did hash but at a very low rate. Chip states and temperature showed abnormal so I rebooted it. You can see it in the history log here:

Code:
2022-01-22 01:37:21 chain avg vol drop to 8.59
2022-01-22 01:38:03 read temp sensor failed: chain = 0, sensor pos = 79, address = 158, reg = 0
2022-01-22 01:39:34 read temp sensor failed: chain = 0, sensor pos = 79, address = 158, reg = 1
2022-01-22 01:39:41 read temp sensor failed: chain = 1, sensor pos = 29, address = 58, reg = 0
2022-01-22 01:39:54 read temp sensor failed: chain = 1, sensor pos = 29, address = 58, reg = 1
2022-01-22 01:40:00 read temp sensor failed: chain = 1, sensor pos = 70, address = 140, reg = 0
2022-01-22 01:40:36 chain avg vol rise to 12.89
2022-01-22 01:40:53 read temp sensor failed: chain = 1, sensor pos = 70, address = 140, reg = 1
2022-01-22 01:41:38 read temp sensor failed: chain = 1, sensor pos = 20, address = 40, reg = 0
2022-01-22 01:42:31 read temp sensor failed: chain = 1, sensor pos = 20, address = 40, reg = 1
2022-01-22 01:42:37 read temp sensor failed: chain = 1, sensor pos = 79, address = 158, reg = 0
2022-01-22 01:42:50 read temp sensor failed: chain = 1, sensor pos = 79, address = 158, reg = 1
2022-01-22 01:42:57 read temp sensor failed: chain = 2, sensor pos = 29, address = 58, reg = 0
2022-01-22 01:44:28 read temp sensor failed: chain = 2, sensor pos = 29, address = 58, reg = 1
2022-01-22 01:45:14 read temp sensor failed: chain = 2, sensor pos = 70, address = 140, reg = 0
2022-01-22 01:45:27 read temp sensor failed: chain = 2, sensor pos = 70, address = 140, reg = 1
2022-01-22 01:45:34 read temp sensor failed: chain = 2, sensor pos = 20, address = 40, reg = 0
2022-01-22 01:45:47 read temp sensor failed: chain = 2, sensor pos = 20, address = 40, reg = 1
2022-01-22 01:46:33 read temp sensor failed: chain = 2, sensor pos = 79, address = 158, reg = 0
2022-01-22 01:48:04 read temp sensor failed: chain = 2, sensor pos = 79, address = 158, reg = 1
2022-01-22 01:48:11 read temp sensor failed: chain = 0, sensor pos = 29, address = 58, reg = 0
2022-01-22 01:48:24 read temp sensor failed: chain = 0, sensor pos = 29, address = 58, reg = 1
2022-01-22 01:48:30 read temp sensor failed: chain = 0, sensor pos = 70, address = 140, reg = 0
2022-01-22 01:50:02 read temp sensor failed: chain = 0, sensor pos = 70, address = 140, reg = 1
2022-01-22 01:50:48 read temp sensor failed: chain = 0, sensor pos = 20, address = 40, reg = 0
2022-01-22 01:51:01 read temp sensor failed: chain = 0, sensor pos = 20, address = 40, reg = 1
2022-01-22 01:51:07 read temp sensor failed: chain = 0, sensor pos = 79, address = 158, reg = 0
2022-01-22 01:51:20 read temp sensor failed: chain = 0, sensor pos = 79, address = 158, reg = 1
2022-01-22 01:52:06 read temp sensor failed: chain = 1, sensor pos = 29, address = 58, reg = 0
2022-01-22 01:53:38 read temp sensor failed: chain = 1, sensor pos = 29, address = 58, reg = 1
2022-01-22 01:53:44 read temp sensor failed: chain = 1, sensor pos = 70, address = 140, reg = 0
2022-01-22 01:53:57 read temp sensor failed: chain = 1, sensor pos = 70, address = 140, reg = 1
2022-01-22 01:54:04 read temp sensor failed: chain = 1, sensor pos = 20, address = 40, reg = 0
2022-01-22 01:54:56 read temp sensor failed: chain = 1, sensor pos = 20, address = 40, reg = 1
2022-01-22 01:55:42 read temp sensor failed: chain = 1, sensor pos = 79, address = 158, reg = 0
2022-01-22 01:56:21 avg rate is lower than ideal rate, 40150.39 in 29 mins
2022-01-22 01:56:34 read temp sensor failed: chain = 1, sensor pos = 79, address = 158, reg = 1
2022-01-22 01:56:41 read temp sensor failed: chain = 2, sensor pos = 29, address = 58, reg = 0
2022-01-22 01:56:54 read temp sensor failed: chain = 2, sensor pos = 29, address = 58, reg = 1
2022-01-22 01:57:00 read temp sensor failed: chain = 2, sensor pos = 70, address = 140, reg = 0
2022-01-22 01:58:32 read temp sensor failed: chain = 2, sensor pos = 70, address = 140, reg = 1
2022-01-22 01:59:18 read temp sensor failed: chain = 2, sensor pos = 20, address = 40, reg = 0
2022-01-22 01:59:31 read temp sensor failed: chain = 2, sensor pos = 20, address = 40, reg = 1
2022-01-22 01:59:37 read temp sensor failed: chain = 2, sensor pos = 79, address = 158, reg = 0
2022-01-22 02:00:30 read temp sensor failed: chain = 2, sensor pos = 79, address = 158, reg = 1
2022-01-22 02:00:30 over max temp, pcb temp 75 (max 80) chip temp 93 (max 95), pcb temp rise 0 chip temp rise 0, total_exit_failure 11
2022-01-22 02:00:30 ERROR_TEMP_TOO_HIGH: over max temp
2022-01-22 02:00:30 stop_mining: over max temp
2022-01-22 02:00:30 uninit_temp_info
2022-01-22 02:00:30 do not read temp anymore...
2022-01-22 02:00:30 cancel thread
2022-01-22 02:00:30 cancel thread
2022-01-22 02:00:30 cancel thread
2022-01-22 02:00:30 ****power off hashboard****
2022-01-22 02:00:32 temp monitor thread exit
2022-01-22 02:02:25 ****power off hashboard****

After rebooting, it's stuck in this perpetual state of online but not hashing. Btw, there was plenty of airflow and my room is a cool 73 degrees F.

Here is the current log. Can anyone help me understand "ERROR_SOC_INIT: soc init failed!" and why entries like, "Chain x only find 100 asic, will power off hash board x" show up? It doesn't show a power issue. I'm also connected to the internet and the pool, but hashing is just at zero.

Code:
 Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209668K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19708K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6636K (cd47e000 - cdaf9000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x000002420000
nand_read_bbt: bad block at 0x000002440000
nand_read_bbt: bad block at 0x000002460000
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1887179327
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID D552F020-5F5C-4570-92AB-8DAAEA8A1D39, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 3755559332
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): recovery needed
UBIFS (ubi2:0): recovery completed
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 4797DD4F-AE0D-410E-8EFF-1E91649A3869, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Sat Jul 24 14:04:45 CST 2021 type: Antminer S19a
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Sat Jul 24 14:04:45 CST 2021 type: Antminer S19a
1970-01-01 00:00:10 commit version: db12feb 2021-05-12 15:03:10, build by: jenkins 2021-07-24 14:16:14
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine BHB28611 conf
1970-01-01 00:00:10 machine : BHB28611
1970-01-01 00:00:10 chain_num 4, chain_domain_num 9, chain_asic_num 72, domain_asic_num 8
1970-01-01 00:00:10 asic 23, wind 0, y 8
1970-01-01 00:00:10 air in
1970-01-01 00:00:10 asic 56, wind 0, y 8
1970-01-01 00:00:10 air in
1970-01-01 00:00:10 asic 16, wind 0, y 1
1970-01-01 00:00:11 air out
1970-01-01 00:00:11 asic 63, wind 0, y 1
1970-01-01 00:00:11 air out
2022-01-23 14:13:37 miner ID : 800a34093efaa85c
2022-01-23 14:13:37 FPGA Version = 0xB031
2022-01-23 14:13:37 HASH_ON_PLUG V9 = 0x7
2022-01-23 14:13:37 ==========================capability start==========================
2022-01-23 14:13:37 board num = 3
2022-01-23 14:13:37 board id = 0, chain num = 1
2022-01-23 14:13:37 chain id = 0
2022-01-23 14:13:37 board id = 1, chain num = 1
2022-01-23 14:13:37 chain id = 1
2022-01-23 14:13:37 board id = 2, chain num = 1
2022-01-23 14:13:37 chain id = 2
2022-01-23 14:13:37 ==========================capability end============================
2022-01-23 14:13:37 chain num = 3
2022-01-23 14:13:38 [chain 0]
2022-01-23 14:13:38 0x0000 11 52 D6 72 E5 D2 47 14   06 B0 D4 58 B1 46 4A 05
2022-01-23 14:13:38 0x0010 2E 66 92 81 36 39 93 62   86 9F 2B 49 C2 25 26 39
2022-01-23 14:13:38 0x0020 E1 C3 BA C4 A2 CC B8 EF   C1 AE 44 49 28 2C C6 49
2022-01-23 14:13:38 0x0030 D0 0B 1C 1B D9 A8 93 22   E7 19 C9 7C 93 39 8B 4D
2022-01-23 14:13:38 0x0040 66 8F 0D 18 0C D6 A3 AB   C5 2E 6A B7 32 5A E1 B8
2022-01-23 14:13:38 0x0050 E9 C9 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:38 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:38 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:38 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:38 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:38 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:38 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:38 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:38 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:38 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:38 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2022-01-23 14:13:38
2022-01-23 14:13:40 [chain 1]
2022-01-23 14:13:40 0x0000 11 52 B5 5E 53 11 DA 16   7A 66 B6 2B 41 A6 F9 C3
2022-01-23 14:13:40 0x0010 21 4F 7F FA 5A 40 82 61   03 52 01 CC A7 34 98 9E
2022-01-23 14:13:40 0x0020 8F B6 9C EE ED 92 B5 7D   F7 06 FE F1 8D 29 88 6A
2022-01-23 14:13:40 0x0030 51 10 FA C8 D2 49 62 08   F6 C8 F1 C7 BA D3 A3 85
2022-01-23 14:13:40 0x0040 5E 2F 03 2F CF 51 66 E0   C2 CD C3 7E 67 2F 52 4C
2022-01-23 14:13:40 0x0050 B7 2D FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:40 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:40 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:40 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:40 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:40 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:40 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:40 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:40 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:40 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:40 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2022-01-23 14:13:40
2022-01-23 14:13:42 [chain 2]
2022-01-23 14:13:42 0x0000 11 52 9A 85 DA 15 CC E1   0F E9 3B F4 9D BB AA C2
2022-01-23 14:13:42 0x0010 EF F3 00 CC 37 47 E5 8B   9F 6C 6F 48 45 58 BB D5
2022-01-23 14:13:42 0x0020 8C 43 99 6E DB D8 58 9C   19 95 C5 02 5A 86 FC 4E
2022-01-23 14:13:42 0x0030 DD 3C A4 B6 ED 3F 1C 8F   A4 17 6E DB CF C6 7E A1
2022-01-23 14:13:42 0x0040 80 3E A9 B7 F0 CF 7D 30   78 68 01 56 34 B2 48 E4
2022-01-23 14:13:42 0x0050 7E B6 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:42 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:42 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:42 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:42 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:42 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:42 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:42 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:42 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:42 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2022-01-23 14:13:42 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2022-01-23 14:13:42
2022-01-23 14:13:42 fan_eft : 1  fan_pwm : 100
2022-01-23 14:13:42 create thread
2022-01-23 14:13:42 fixed working voltage = -1
2022-01-23 14:13:42 Chain [0] PCB Version: 0x0100
2022-01-23 14:13:42 Chain [0] BOM Version: 0x0100
2022-01-23 14:13:42 Chain [1] PCB Version: 0x0100
2022-01-23 14:13:42 Chain [1] BOM Version: 0x0100
2022-01-23 14:13:42 Chain [2] PCB Version: 0x0100
2022-01-23 14:13:42 Chain [2] BOM Version: 0x0100
2022-01-23 14:13:46 Fan check passed.
2022-01-23 14:13:47 chain[0] PIC jump to app
2022-01-23 14:13:48 Check chain[0] PIC fw version=0xfe
2022-01-23 14:13:49 chain[1] PIC jump to app
2022-01-23 14:13:51 Check chain[1] PIC fw version=0xfe
2022-01-23 14:13:52 chain[2] PIC jump to app
2022-01-23 14:13:54 Check chain[2] PIC fw version=0xfe
2022-01-23 14:13:54 create thread
2022-01-23 14:13:54 max sensor num = 4
2022-01-23 14:13:54 temperature_monitor_thread start...
2022-01-23 14:13:58 power type version: 0x0071
2022-01-23 14:13:58 Enter sleep to make sure power release finish.
2022-01-23 14:14:29 Slept 30 seconds, diff = 0.
2022-01-23 14:14:29 set_voltage_by_steps to 1500.
2022-01-23 14:14:34 start up min temp by 75a = 255
2022-01-23 14:14:34 set UART baud to 115200
2022-01-23 14:14:36 chain avg vol rise to 15.14
2022-01-23 14:14:42 Chain[0]: find 100 asic, times 0
2022-01-23 14:14:50 Chain[0]: find 100 asic, times 1
2022-01-23 14:14:58 Chain[0]: find 100 asic, times 2
2022-01-23 14:14:58 Chain 0 only find 100 asic, will power off hash board 0
2022-01-23 14:15:01 chain avg vol rise to 22.69
2022-01-23 14:15:06 Chain[1]: find 100 asic, times 0
2022-01-23 14:15:12 chain avg vol drop to 15.11
2022-01-23 14:15:14 Chain[1]: find 100 asic, times 1
2022-01-23 14:15:22 Chain[1]: find 100 asic, times 2
2022-01-23 14:15:23 Chain 1 only find 100 asic, will power off hash board 1
2022-01-23 14:15:25 chain avg vol rise to 30.25
2022-01-23 14:15:31 Chain[2]: find 100 asic, times 0
2022-01-23 14:15:35 chain avg vol drop to 15.09
2022-01-23 14:15:39 Chain[2]: find 100 asic, times 1
2022-01-23 14:15:47 Chain[2]: find 100 asic, times 2
2022-01-23 14:15:47 Chain 2 only find 100 asic, will power off hash board 2
2022-01-23 14:15:47 ERROR_SOC_INIT: soc init failed!
2022-01-23 14:15:47 stop_mining: soc init failed!
2022-01-23 14:15:47 uninit_temp_info
2022-01-23 14:15:47 do not read temp anymore...
2022-01-23 14:15:47 cancel thread
2022-01-23 14:15:47 cancel thread
2022-01-23 14:15:47 ****power off hashboard****
2022-01-23 14:15:47 temp monitor thread exit
2022-01-23 14:15:48 STATUS_OKAY
2022-01-23 14:15:48 set_start_time_point total_tv_start_sys=149 total_tv_end_sys=150
2022-01-23 14:15:50 start to init...
2022-01-23 14:15:50 Version num 8
2022-01-23 14:15:50 Mask num 0xe000
2022-01-23 14:15:50 Note: addrInterval or corenum is not initialized.
jr. member
Activity: 31
Merit: 6
August 16, 2021, 03:23:02 AM
#12
I have a similar problem.
Here is a log:

Code:
2021-16-08 12:09:01 chain avg vol drop to 0.82

And PSU do not start again -> Overcurrent protection .
I measured hash board separately on the 220V line and current of each hash board is same -> +-5,1Amp.
If are connected only two hash boards, S19 miner working fine.
I thing my PSU have a problem with current and shuting down after +-5-7 minutes, control board looks good, because EN signal from control board to PSU is in low stage.
FANs are OK, no dust.

Does anyone advise what is wrong in PSU ?

Thanks

M.

newbie
Activity: 2
Merit: 0
August 15, 2021, 06:20:31 PM
#11
my problem also solved after changing the PSU... thanks to baro0k for helping me.. i am a noob so i dont know much..
legendary
Activity: 2436
Merit: 6643
be constructive or S.T.F.U
August 08, 2021, 06:00:52 PM
#10
yeah now I replaced the 2nd power supply and it's work fine so far I'll order 3 more incase anything els happen.

alas, Bitmain just can't make a perfect gear again, it has been the case for years, the 17 series had a huge failure rate due to bad solder, and now the 19 series has a high PSU failure rate, you are not alone in this, I see many folks on telegram complain about these PSUs, including those who have perfect electricity setup and thus it isn't an issue with electricity whatsoever, Bitmain must have messed up with something in that PSU, they probably used a cheap component somewhere to save a few bucks resulting in the failure of mining gears which they sold for a few thousand dollars.
copper member
Activity: 35
Merit: 5
August 08, 2021, 12:30:29 PM
#9
I've had approx one in ten AWP12's fail so far, they don't seem to be very reliable.


yeah now I replaced the 2nd power supply and it's work fine so far I'll order 3 more incase anything els happen.




full member
Activity: 219
Merit: 426
August 06, 2021, 03:24:59 PM
#8
I've had approx one in ten AWP12's fail so far, they don't seem to be very reliable.
copper member
Activity: 35
Merit: 5
August 04, 2021, 08:24:37 AM
#7
OK it's the power supply as the guys mentioned just replaced it and it's will work fine. I'll leave this here so everyone can know that's the answer helps me.
newbie
Activity: 2
Merit: 0
August 03, 2021, 11:39:53 PM
#6
@baro0k

Bro I also have the same problem with my s19 pro.. it’s online but not hashing.. my miner dashboard is also exactly same like you have shared - https://keybase.pub/baro0k/7d6d0c68-fef9-45af-8671-ff5f030a8a55.jpg

My kernel log also is exactly same like yours-

2021-08-01 15:27:03 fan_eft : 0  fan_pwm : 100
2021-08-01 15:27:03 create thread
2021-08-01 15:27:03 fixed working voltage = 1280
2021-08-01 15:27:03 Chain
  • PCB Version: 0x011e
2021-08-01 15:27:03 Chain
  • BOM Version: 0x0100
2021-08-01 15:27:03 Chain [1] PCB Version: 0x011e
2021-08-01 15:27:03 Chain [1] BOM Version: 0x0100
2021-08-01 15:27:03 Chain [2] PCB Version: 0x011e
2021-08-01 15:27:03 Chain [2] BOM Version: 0x0100
2021-08-01 15:27:07 Fan check passed.
2021-08-01 15:27:08 chain[0] PIC jump to app
2021-08-01 15:27:10 Check chain[0] PIC fw version=0x89
2021-08-01 15:27:11 chain[1] PIC jump to app
2021-08-01 15:27:12 Check chain[1] PIC fw version=0x89
2021-08-01 15:27:13 chain[2] PIC jump to app
2021-08-01 15:27:15 Check chain[2] PIC fw version=0x89
2021-08-01 15:27:15 create thread
2021-08-01 15:27:15 max sensor num = 4
2021-08-01 15:27:15 temperature_monitor_thread start...
2021-08-01 15:27:19 power type version: 0x0071
2021-08-01 15:27:19 Enter sleep to make sure power release finish.
2021-08-01 15:27:50 Slept 30 seconds, diff = 0.
2021-08-01 15:27:50 set_voltage_by_steps to 1500.
2021-08-01 15:27:56 power voltage can not meet the target
2021-08-01 15:27:58 power voltage can not meet the target
2021-08-01 15:28:00 power voltage can not meet the target
2021-08-01 15:28:00 Sweep error string = V:1.
2021-08-01 15:28:00 ERROR_POWER_LOST: get power type version failed!
2021-08-01 15:28:00 stop_mining: get power type version failed!
2021-08-01 15:28:00 uninit_temp_info
2021-08-01 15:28:00 do not read temp anymore...
2021-08-01 15:28:00 cancel thread
2021-08-01 15:28:00 cancel thread
2021-08-01 15:28:00 ****power off hashboard****
2021-08-01 15:28:03 temp monitor thread exit
2021-08-01 15:28:03 ERROR_SOC_INIT: soc init failed!
2021-08-01 15:28:03 stop_mining: soc init failed!
2021-08-01 15:28:03 ****power off hashboard****
2021-08-01 15:28:04 start to init...
2021-08-01 15:28:04 Version num 8
2021-08-01 15:28:04 Mask num 0xe000
2021-08-01 15:28:04 Note: addrInterval or corenum is not initialized.
2021-08-01 15:28:05 STATUS_OKAY
2021-08-01 15:28:05 set_start_time_point total_tv_start_sys=85 total_tv_end_sys=86

Are you able to solve the problem? If yes.. then how? Please help me..
copper member
Activity: 35
Merit: 5
June 26, 2021, 01:22:51 PM
#5
Code:
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209672K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19704K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6632K (cd480000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2139614750
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID D666B683-1A12-4943-862F-F9297AB913CC, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 3185045493
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): recovery needed
UBIFS (ubi2:0): recovery completed
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 5D10E9C4-3EEF-42F3-9B99-2A6A8199E604, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:35:43
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBP1901 conf
1970-01-01 00:00:10 machine : NBP1901
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
2021-06-26 10:47:27 miner ID : 8114944857104814
2021-06-26 10:47:27 FPGA Version = 0xB031
2021-06-26 10:47:27 HASH_ON_PLUG V9 = 0x7
2021-06-26 10:47:27 ==========================capability start==========================
2021-06-26 10:47:27 board num = 3
2021-06-26 10:47:27 board id = 0, chain num = 1
2021-06-26 10:47:27 chain id = 0
2021-06-26 10:47:27 board id = 1, chain num = 1
2021-06-26 10:47:27 chain id = 1
2021-06-26 10:47:27 board id = 2, chain num = 1
2021-06-26 10:47:27 chain id = 2
2021-06-26 10:47:27 ==========================capability end============================
2021-06-26 10:47:27 chain num = 3
2021-06-26 10:47:29 [chain 0]
2021-06-26 10:47:29 0x0000 11 4A A6 B4 FC 5D 3B 06   BC A2 07 A9 DD CB 76 B3
2021-06-26 10:47:29 0x0010 8F 7D DB 5F A7 B9 4A BA   0E 54 4C 06 CF 33 C0 73
2021-06-26 10:47:29 0x0020 BA AD DE 1F E6 4A 29 62   41 E6 44 CE 57 5A 5E 74
2021-06-26 10:47:29 0x0030 B9 6E 4A 70 D6 A6 2F FE   89 39 B6 C5 DF EF 42 01
2021-06-26 10:47:29 0x0040 01 EF 91 C7 1A 04 74 D9   CA 8C FF FF FF FF FF FF
2021-06-26 10:47:29 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:29 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:29 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:29 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:29 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:29 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:29 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:29 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:29 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:29 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:29 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-06-26 10:47:29
2021-06-26 10:47:31 [chain 1]
2021-06-26 10:47:31 0x0000 11 4A 2C D1 DB C7 7C 2B   4A C7 C0 C2 97 66 08 A9
2021-06-26 10:47:31 0x0010 7C 85 BF 6D ED 5E 10 75   98 25 29 F1 EB FD 37 1E
2021-06-26 10:47:31 0x0020 F4 2D 64 02 CD A9 AD E0   4E 4D D2 FB C8 09 7F A9
2021-06-26 10:47:31 0x0030 F1 1A E3 35 20 A0 83 A2   0E 93 BC E7 D7 D7 CD FD
2021-06-26 10:47:31 0x0040 74 04 DC 92 34 03 AE 7B   B9 9F FF FF FF FF FF FF
2021-06-26 10:47:31 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:31 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:31 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:31 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:31 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:31 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:31 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:31 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:31 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:31 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:31 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-06-26 10:47:31
2021-06-26 10:47:33 [chain 2]
2021-06-26 10:47:33 0x0000 11 4A 43 7C 58 3C 04 5A   84 7E EC BE 94 F0 BF 99
2021-06-26 10:47:33 0x0010 4D DF 78 39 E0 9D 60 44   68 AE 9D 16 25 50 85 E4
2021-06-26 10:47:33 0x0020 4A EF 84 8F EB 42 3A 8E   5F 27 0F 62 86 29 77 C7
2021-06-26 10:47:33 0x0030 77 08 2A 8F C1 2F 37 10   6F 16 EF 30 D4 3A 52 60
2021-06-26 10:47:33 0x0040 27 EC 42 54 8F 48 FD 35   8B 4D FF FF FF FF FF FF
2021-06-26 10:47:33 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:33 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:33 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:33 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:33 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:33 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:33 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:33 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:33 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:33 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-26 10:47:33 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-06-26 10:47:33
2021-06-26 10:47:33 fan_eft : 0  fan_pwm : 100
2021-06-26 10:47:33 create thread
2021-06-26 10:47:33 fixed working voltage = 1260
2021-06-26 10:47:33 Chain [0] PCB Version: 0x0100
2021-06-26 10:47:33 Chain [0] BOM Version: 0x0100
2021-06-26 10:47:33 Chain [1] PCB Version: 0x0100
2021-06-26 10:47:33 Chain [1] BOM Version: 0x0100
2021-06-26 10:47:33 Chain [2] PCB Version: 0x0100
2021-06-26 10:47:33 Chain [2] BOM Version: 0x0100
2021-06-26 10:47:37 Fan check passed.
2021-06-26 10:47:38 chain[0] PIC jump to app
2021-06-26 10:47:39 Check chain[0] PIC fw version=0x89
2021-06-26 10:47:40 chain[1] PIC jump to app
2021-06-26 10:47:42 Check chain[1] PIC fw version=0x89
2021-06-26 10:47:43 chain[2] PIC jump to app
2021-06-26 10:47:44 Check chain[2] PIC fw version=0x89
2021-06-26 10:47:45 create thread
2021-06-26 10:47:45 max sensor num = 4
2021-06-26 10:47:45 temperature_monitor_thread start...
2021-06-26 10:47:49 power type version: 0x0071
2021-06-26 10:47:49 Enter sleep to make sure power release finish.
2021-06-26 10:48:20 Slept 30 seconds, diff = 1.
2021-06-26 10:48:20 set_voltage_by_steps to 1500.
2021-06-26 10:48:25 start up min temp by 75a = 34
2021-06-26 10:48:25 set UART baud to 115200
2021-06-26 10:48:30 chain avg vol rise to 15.18
2021-06-26 10:48:33 Chain[0]: find 114 asic, times 0
2021-06-26 10:48:41 Chain[1]: find 114 asic, times 0
2021-06-26 10:48:49 Chain[2]: find 114 asic, times 0
2021-06-26 10:48:49 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1
2021-06-26 10:48:53 min freq in eeprom = 525
2021-06-26 10:48:53 fixed frequency is 525
2021-06-26 10:48:53 Bring up temperature is 35
2021-06-26 10:48:54 set UART baud to 12000000
2021-06-26 10:48:54 set_voltage_by_steps to 1260.
2021-06-26 10:49:01 STATUS_INITED: soc init done!
2021-06-26 10:49:01 create thread
2021-06-26 10:49:01 create thread
2021-06-26 10:49:03 start to init...
2021-06-26 10:49:12 Init done!
2021-06-26 10:49:12 STATUS_OKAY
2021-06-26 10:49:12 start the cached job
2021-06-26 10:49:12 Version num 8
2021-06-26 10:49:12 Mask num 0xe000
2021-06-26 10:49:12 freq = 525, percent = 90, hcn = 12480, timeout = 449
2021-06-26 10:49:12 set_start_time_point total_tv_start_sys=122 total_tv_end_sys=123



I find out that using a wrong screws was the mistake and I purchased a new screws and it fail I need the screws size if anyone can help me with, for the mistake it was auto corrected by my phone "NOW it's running without anything wrong" then 20 minutes later I find out a red screws<<< the one that connect the power-supply with the hashboards.

Do you have an extra s19 pro? If you have, try to use it to test the PSU.

If you don't have one, try to physically check the control board and check the power terminal and plug if there are burn parts.
If there are no burn parts under the socket or the wire try to flash it with the latest s19 pro firmware from Bitmain and make sure you directly plug your miner on the wall outlet. I'm not 100% sure if it can solve the problem but just try it.

If nothing works then you have a defective PSU and it needs to replace with a working PSU.

Now its running without anyline on



What do you mean about this? Is that the data cable from the control board to hashboard?

legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
June 25, 2021, 09:07:21 AM
#4
Do you have an extra s19 pro? If you have, try to use it to test the PSU.

If you don't have one, try to physically check the control board and check the power terminal and plug if there are burn parts.
If there are no burn parts under the socket or the wire try to flash it with the latest s19 pro firmware from Bitmain and make sure you directly plug your miner on the wall outlet. I'm not 100% sure if it can solve the problem but just try it.

If nothing works then you have a defective PSU and it needs to replace with a working PSU.

Now its running without anyline on



What do you mean about this? Is that the data cable from the control board to hashboard?
copper member
Activity: 35
Merit: 5
June 25, 2021, 02:26:12 AM
#3
Than you for your time, I did what you recommend and still nothing fixed 2 times it's giving no lights while everything is good on the main page of miner NOTE I cut of the electricity to change the plugs with another miner and they work fine, is it might be the control board or the cables?

Code:

===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:35:43
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBP1901 conf
1970-01-01 00:00:10 machine : NBP1901
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
1970-01-01 00:00:16 miner ID : 802c9c485710481c
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:16 board num = 3
1970-01-01 00:00:16 board id = 0, chain num = 1
1970-01-01 00:00:16 chain id = 0
1970-01-01 00:00:16 board id = 1, chain num = 1
1970-01-01 00:00:16 chain id = 1
1970-01-01 00:00:16 board id = 2, chain num = 1
1970-01-01 00:00:16 chain id = 2
1970-01-01 00:00:16 ==========================capability end============================
1970-01-01 00:00:16 chain num = 3
1970-01-01 00:00:18 [chain 0]
1970-01-01 00:00:18 0x0000 11 4A F9 9D D6 1F AE 26   8A 99 95 71 AF AD F5 EF
1970-01-01 00:00:18 0x0010 8E C8 52 86 54 4B F5 92   19 87 11 41 6E 99 8F AA
1970-01-01 00:00:18 0x0020 D3 9F 6A 80 DB 86 27 71   21 FD 2D 54 D9 F0 FC E4
1970-01-01 00:00:18 0x0030 C8 55 BC C0 B9 A7 A4 C2   C0 DD 66 08 B0 98 F4 F0
1970-01-01 00:00:18 0x0040 D0 37 33 55 62 93 C2 60   61 61 FF FF FF FF FF FF
1970-01-01 00:00:18 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:18
2021-06-25 07:19:31 [chain 1]
2021-06-25 07:19:31 0x0000 11 4A D8 14 77 DC 90 36   6C 27 21 D6 91 E3 F5 97
2021-06-25 07:19:31 0x0010 7C A2 98 AD 28 1A F3 3C   E6 2E E6 FF 6B 52 35 27
2021-06-25 07:19:31 0x0020 08 73 A4 31 BC 0D A2 20   FE A8 3F CE 1A 7C 38 CC
2021-06-25 07:19:31 0x0030 EA 18 C8 20 FC 46 1B DE   6D F6 2C A6 B1 3D 1F 56
2021-06-25 07:19:31 0x0040 05 17 07 83 8A 8D 97 4B   D1 2F FF FF FF FF FF FF
2021-06-25 07:19:31 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:31 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:31 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:31 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:31 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:31 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:31 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:31 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:31 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:31 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:31 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-06-25 07:19:31
2021-06-25 07:19:33 [chain 2]
2021-06-25 07:19:33 0x0000 11 4A 5C F2 00 7D 32 35   96 89 27 7A 87 4E E3 B3
2021-06-25 07:19:33 0x0010 34 D0 8A DE C8 F8 26 85   FF D5 EA 77 0F 48 02 C3
2021-06-25 07:19:33 0x0020 CE 6E 82 4D 4D 4D A4 00   AF 0D 68 42 B7 90 F9 19
2021-06-25 07:19:33 0x0030 3C 30 B3 E1 4A 82 90 33   9D DE C5 23 A2 FC B5 DA
2021-06-25 07:19:33 0x0040 C1 36 1F 12 25 BF AA F2   9E 43 FF FF FF FF FF FF
2021-06-25 07:19:33 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:33 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:33 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:33 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:33 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:33 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:33 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:33 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:33 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:33 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-25 07:19:33 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-06-25 07:19:33
2021-06-25 07:19:33 fan_eft : 0  fan_pwm : 100
2021-06-25 07:19:33 create thread
2021-06-25 07:19:33 fixed working voltage = 1260
2021-06-25 07:19:33 Chain [0] PCB Version: 0x0100
2021-06-25 07:19:33 Chain [0] BOM Version: 0x0100
2021-06-25 07:19:33 Chain [1] PCB Version: 0x0100
2021-06-25 07:19:33 Chain [1] BOM Version: 0x0100
2021-06-25 07:19:33 Chain [2] PCB Version: 0x0100
2021-06-25 07:19:33 Chain [2] BOM Version: 0x0100
2021-06-25 07:19:37 Fan check passed.
2021-06-25 07:19:38 chain[0] PIC jump to app
2021-06-25 07:19:40 Check chain[0] PIC fw version=0x89
2021-06-25 07:19:41 chain[1] PIC jump to app
2021-06-25 07:19:42 Check chain[1] PIC fw version=0x89
2021-06-25 07:19:43 chain[2] PIC jump to app
2021-06-25 07:19:45 Check chain[2] PIC fw version=0x89
2021-06-25 07:19:45 create thread
2021-06-25 07:19:45 max sensor num = 4
2021-06-25 07:19:45 temperature_monitor_thread start...
2021-06-25 07:19:49 power type version: 0x0071
2021-06-25 07:19:49 Enter sleep to make sure power release finish.
2021-06-25 07:20:20 Slept 30 seconds, diff = 2.
2021-06-25 07:20:20 set_voltage_by_steps to 1500.
2021-06-25 07:20:26 power voltage can not meet the target
2021-06-25 07:20:28 power voltage can not meet the target
2021-06-25 07:20:30 power voltage can not meet the target
2021-06-25 07:20:30 Sweep error string = V:1.
2021-06-25 07:20:30 ERROR_POWER_LOST: get power type version failed!
2021-06-25 07:20:30 stop_mining: get power type version failed!
2021-06-25 07:20:30 uninit_temp_info
2021-06-25 07:20:30 do not read temp anymore...
2021-06-25 07:20:30 cancel thread
2021-06-25 07:20:30 cancel thread
2021-06-25 07:20:30 ****power off hashboard****
2021-06-25 07:20:33 start to init...
2021-06-25 07:20:33 Version num 8
2021-06-25 07:20:33 Mask num 0xe000
2021-06-25 07:20:33 Note: addrInterval or corenum is not initialized.
2021-06-25 07:20:33 temp monitor thread exit
2021-06-25 07:20:33 ERROR_SOC_INIT: soc init failed!
2021-06-25 07:20:33 stop_mining: soc init failed!
2021-06-25 07:20:33 ****power off hashboard****
2021-06-25 07:20:35 STATUS_OKAY
2021-06-25 07:20:35 set_start_time_point total_tv_start_sys=85 total_tv_end_sys=86
 


I got the fault light off but am still not connected to the pool factory reset has been done couple of times.  


Now its running without anyline on



Code:
2021-06-24 23:28:48 power voltage can not meet the target
2021-06-24 23:28:50 power voltage can not meet the target
2021-06-24 23:28:53 power voltage can not meet the target
2021-06-24 23:28:53 Sweep error string = V:1.
2021-06-24 23:28:53 ERROR_POWER_LOST: get power type version failed!
2021-06-24 23:28:53 stop_mining: get power type version failed!

It seems it still a PSU issue, not a fan issue because according to your log it passed the fan check look below

Code:
2021-06-24 23:28:00 Fan check passed.

But the error above about power voltage, it didn't meet the target or it's not giving enough power from PSU that is why it's not hashing.

Try to reconnect the PSU remove them from the board and plug it again and test.
legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
June 24, 2021, 08:52:01 PM
#2
Code:
2021-06-24 23:28:48 power voltage can not meet the target
2021-06-24 23:28:50 power voltage can not meet the target
2021-06-24 23:28:53 power voltage can not meet the target
2021-06-24 23:28:53 Sweep error string = V:1.
2021-06-24 23:28:53 ERROR_POWER_LOST: get power type version failed!
2021-06-24 23:28:53 stop_mining: get power type version failed!

It seems it still a PSU issue, not a fan issue because according to your log it passed the fan check look below

Code:
2021-06-24 23:28:00 Fan check passed.

But the error above about power voltage, it didn't meet the target or it's not giving enough power from PSU that is why it's not hashing.

Try to reconnect the PSU remove them from the board and plug it again and test.
copper member
Activity: 35
Merit: 5
June 24, 2021, 07:13:53 PM
#1
hello guys seams like noobs getting hunted with million of issues XD

long story short one of my miners died 3 weeks ago and I checked everything and find out that the PS was dead I ordered a new one and I was happy to find someone shipping cross the oceans to the desert and when I replaced my powersupply my miner can't hash! I do a research some of the S17 answers is there is a fan not working.


is there any recommended fans for the s19pro am running and if there is another issue let me please.


regards.


Code:
2021-06-24 23:27:52 [chain 0]
2021-06-24 23:27:52 0x0000 11 4A F9 9D D6 1F AE 26   8A 99 95 71 AF AD F5 EF
2021-06-24 23:27:52 0x0010 8E C8 52 86 54 4B F5 92   19 87 11 41 6E 99 8F AA
2021-06-24 23:27:52 0x0020 D3 9F 6A 80 DB 86 27 71   21 FD 2D 54 D9 F0 FC E4
2021-06-24 23:27:52 0x0030 C8 55 BC C0 B9 A7 A4 C2   C0 DD 66 08 B0 98 F4 F0
2021-06-24 23:27:52 0x0040 D0 37 33 55 62 93 C2 60   61 61 FF FF FF FF FF FF
2021-06-24 23:27:52 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:52 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:52 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:52 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:52 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:52 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:52 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:52 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:52 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:52 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:52 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-06-24 23:27:52
2021-06-24 23:27:54 [chain 1]
2021-06-24 23:27:54 0x0000 11 4A D8 14 77 DC 90 36   6C 27 21 D6 91 E3 F5 97
2021-06-24 23:27:54 0x0010 7C A2 98 AD 28 1A F3 3C   E6 2E E6 FF 6B 52 35 27
2021-06-24 23:27:54 0x0020 08 73 A4 31 BC 0D A2 20   FE A8 3F CE 1A 7C 38 CC
2021-06-24 23:27:54 0x0030 EA 18 C8 20 FC 46 1B DE   6D F6 2C A6 B1 3D 1F 56
2021-06-24 23:27:54 0x0040 05 17 07 83 8A 8D 97 4B   D1 2F FF FF FF FF FF FF
2021-06-24 23:27:54 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:54 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:54 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:54 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:54 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:54 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:54 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:54 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:54 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:54 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:54 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-06-24 23:27:54
2021-06-24 23:27:56 [chain 2]
2021-06-24 23:27:56 0x0000 11 4A 5C F2 00 7D 32 35   96 89 27 7A 87 4E E3 B3
2021-06-24 23:27:56 0x0010 34 D0 8A DE C8 F8 26 85   FF D5 EA 77 0F 48 02 C3
2021-06-24 23:27:56 0x0020 CE 6E 82 4D 4D 4D A4 00   AF 0D 68 42 B7 90 F9 19
2021-06-24 23:27:56 0x0030 3C 30 B3 E1 4A 82 90 33   9D DE C5 23 A2 FC B5 DA
2021-06-24 23:27:56 0x0040 C1 36 1F 12 25 BF AA F2   9E 43 FF FF FF FF FF FF
2021-06-24 23:27:56 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:56 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:56 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:56 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:56 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:56 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:56 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:56 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:56 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:56 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-06-24 23:27:56 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-06-24 23:27:56
2021-06-24 23:27:56 fan_eft : 0  fan_pwm : 100
2021-06-24 23:27:56 create thread
2021-06-24 23:27:56 fixed working voltage = 1260
2021-06-24 23:27:56 Chain [0] PCB Version: 0x0100
2021-06-24 23:27:56 Chain [0] BOM Version: 0x0100
2021-06-24 23:27:56 Chain [1] PCB Version: 0x0100
2021-06-24 23:27:56 Chain [1] BOM Version: 0x0100
2021-06-24 23:27:56 Chain [2] PCB Version: 0x0100
2021-06-24 23:27:56 Chain [2] BOM Version: 0x0100
2021-06-24 23:28:00 Fan check passed.
2021-06-24 23:28:01 chain[0] PIC jump to app
2021-06-24 23:28:02 Check chain[0] PIC fw version=0x89
2021-06-24 23:28:03 chain[1] PIC jump to app
2021-06-24 23:28:05 Check chain[1] PIC fw version=0x89
2021-06-24 23:28:06 chain[2] PIC jump to app
2021-06-24 23:28:07 Check chain[2] PIC fw version=0x89
2021-06-24 23:28:08 create thread
2021-06-24 23:28:08 max sensor num = 4
2021-06-24 23:28:08 temperature_monitor_thread start...
2021-06-24 23:28:12 power type version: 0x0071
2021-06-24 23:28:12 Enter sleep to make sure power release finish.
2021-06-24 23:28:43 Slept 30 seconds, diff = 2.
2021-06-24 23:28:43 set_voltage_by_steps to 1500.
2021-06-24 23:28:48 power voltage can not meet the target
2021-06-24 23:28:50 power voltage can not meet the target
2021-06-24 23:28:53 power voltage can not meet the target
2021-06-24 23:28:53 Sweep error string = V:1.
2021-06-24 23:28:53 ERROR_POWER_LOST: get power type version failed!
2021-06-24 23:28:53 stop_mining: get power type version failed!
2021-06-24 23:28:53 uninit_temp_info
2021-06-24 23:28:53 do not read temp anymore...
2021-06-24 23:28:53 cancel thread
2021-06-24 23:28:53 cancel thread
2021-06-24 23:28:53 ****power off hashboard****
2021-06-24 23:28:55 start to init...
2021-06-24 23:28:55 Version num 8
2021-06-24 23:28:55 Mask num 0xe000
2021-06-24 23:28:55 Note: addrInterval or corenum is not initialized.
2021-06-24 23:28:56 temp monitor thread exit
2021-06-24 23:28:56 ERROR_SOC_INIT: soc init failed!
2021-06-24 23:28:56 stop_mining: soc init failed!
2021-06-24 23:28:56 ****power off hashboard****
2021-06-24 23:28:58 STATUS_OKAY
2021-06-24 23:28:58 set_start_time_point total_tv_start_sys=85 total_tv_end_sys=86
Jump to: