New board:
Topic: S3-controller, meow-version (Read 798 times)
Yes this is the one. The one in pictures is first version. I have second version now also. Pretty much same than first version but corrected and changed some footprints of components and component placing. Fan speed is shown for both fans now. And lower front led works now same way than original controller. If anyone wants to buy with btc send me pm here, eBay is not a fan of bitcoins.
New board:
New board:
is this the one your selling ebay if so im about to buy one soon ?.
I got my afterburner controller board for the S3+ in the mail today and I could not be happier! It lives once again!!!
https://i.imgur.com/aoegnvS.jpg
https://i.imgur.com/qd2wzSP.jpg
https://i.imgur.com/CXnnBTC.jpg
https://i.imgur.com/wmdpT9K.jpg
Many thanks to @pinhead666 and all who helped him with his hard work of perfecting a redesign (and making it to fabrication!) of the S3/S3+ controller board!
https://i.imgur.com/aoegnvS.jpg
https://i.imgur.com/qd2wzSP.jpg
https://i.imgur.com/CXnnBTC.jpg
https://i.imgur.com/wmdpT9K.jpg
Many thanks to @pinhead666 and all who helped him with his hard work of perfecting a redesign (and making it to fabrication!) of the S3/S3+ controller board!
Such excite! Very meow! Stella (my cat) approves!
Consider me in on this!
Consider me in on this!
I got my version of S3-controller working as it should, at last. I have a little helper now 
. I've had also help with software from other members. Thank you for all of you. Firmware is original, but controller differs slightly from BM controller. I don't have beeper, and led's are little different way. Original ar9331-modules are hard to get and price of them is much too high, so I've used a different module (module came with chinese router software and updating fw from gui was impossible 
). Ofcourse there are other changes too, no schematics of original controller are available and so I had to figure out many things myself. After a few experiments I got everything right, and now it works fine. Some pictures of it:
. I've had also help with software from other members. Thank you for all of you. Firmware is original, but controller differs slightly from BM controller. I don't have beeper, and led's are little different way. Original ar9331-modules are hard to get and price of them is much too high, so I've used a different module (module came with chinese router software and updating fw from gui was impossible ). Ofcourse there are other changes too, no schematics of original controller are available and so I had to figure out many things myself. After a few experiments I got everything right, and now it works fine. Some pictures of it: Jump to: