Topic: S3Miner Connect but wont hash (Read 1167 times)

We have another miner hashing away now .  Took a small game of wack a mole on problems through teamviewer.

First it was originally connected to a mac through connection sharing, it did not play well and was not letting S3 hash.  Fix was to make S3 able to connect to router and have nothing in between.  Also set up antpool and got main and backup pools set.

The network was not using the common IP ranges.  So set a static IP within it's IP set.   This brought a new problem PSU was not able to handle it, was turning off once it started hashing.

To fix this internet from router was unplugged and S3 was not able to start hashing.   This gave OP time to log in and lower freq from the tad OC it had for a S3.  Internet plugged back into router after turning down freq.

After freq was turned down it kicked into working.   It was able to connect to antpool through Ethernet cable to router.  And after lowering freq PSU did not shut down after starting of hashing.



So story ends happily

sounds good

Sending a PM to see about teamviewer option.

Im pretty sure  Not 100% though
http://gyazo.com/db787e34d038a989fe18a9630607de52   - this shows i dont have a worker

But i typed in cody0520.worker1     PW 123

It looks good have you made sure of your worker name?

On antpool status screen it should say "Worker:  (your real worker name).WorkerID or (your real worker name)_WorkerID (WorkerID must consist of letters or numbers). Workers are added automatically, use any password.


If you are sure on it then do you have teamviewer or can you install it?  With it I can remote in and take a look much quicker. (Just please don't have anything confidential or passwords etc up.  As I don't want to see anything besides antpool page and miner really).

Pool config - http://gyazo.com/41d436ed1e8f4832423887a414f943f7
Miner Status - http://gyazo.com/456f1d81444dac434d0beb9881e7b007
Internet config - http://gyazo.com/a4b8679592b099b89e95a1d4cebc1f43
Router Config - http://gyazo.com/8ccbcbc71c86506c5900786c41c99913

Can you take a screenshot of configuration page and status page please.

Green ethernet light is blinking alot faster now,  But still no Hashing speed

Instead of p2p give this server a try and see what it does: us.solo.antpool.com:3333

 here ya go   didnt blank anything out, well because meh it will change once i get it mining    

http://gyazo.com/707fefa5193b831a00698d796299eb19

Note: i only configured pool 1.    pool 2/3 are not changed since default factory settings
Network settings have not been touched since restored

Can you upload screenshot of your configuration page please?

awesome   Sigh updating miner config to Antpool still results in nothing :/
Red and green light still steady,  the green ethernet light flashing orange ethernet steady

Antpool is very easy to use/understand.  It will have speed graph of speed and at top 10min, 30min, 1 hour, and 1 day speeds.  And balance at top.  All very quick to get info.

Also you can use PPLNS - 0% or PPS - 2.5% .  Hard to beat a pool with both and it's a option not to mention the percents are nice.

Happy Mining!

Got a miner,   The s3 still isnt mining

  Yea im in east coast USA, GA   Alright give me just a few gotta power miner back on and ill config it to antpool.  I just like eobot because it shows the amount of currency im getting/second VS just bunchs of numbers and letters

Are you in us?  I'm going to assume yes but if not this needs a little tweaking for possibly different server.

Instead of eobot lets go over to a real pool.  I suggest trying antpool, sign up here - https://www.antpool.com/home.htm

You will need the worker name. I blacked mine out but it will be workername.something.  For example if worker name is cody, then a example is cody.s3 .

Below is one of my configs to show a working one.


Click for full size - http://i100.photobucket.com/albums/m25/notlist3d/pool_zps7c2let1r.jpg



If you have trouble just let me know with what part.

Mmk since im using a Macbook pro  i cant figure out how to screenshot the status page,  but the status page is blank  no information is showing

ill do that when i get back home, currently at work,  but status page shows nothing at all

I have signed up on the eobot cloud mining services,  I have also tried it on a few other pools on a few friends that have they miners working on

Picture of statuspage when miner is connected to network would be helpful.

<400W at the wall, and it's generally not profitable to overclock them -and even if so, it's still far from unsafe for 2 proper PCIe cables- so IMO the 4 PCIe cables aren't necessary.

I agree w/ point #2, which is why I was asking him if the pool status is showing as "alive".

Being able to access is good, 500w chances are is ok I'm guessing it has 2 separate pci-e cords one for each blade.

It sounds like he can access it but it's not hasing.  I think there is a good chance it's going to be pool configuration.

The 6pin PCIe port used to power each blade (front or back) does not matter, but you need both blades to be powered.  

When you say you could access the GUI, was it through the network? It needs to be plugged into your router and network in order to hash, it doesn't access the internet through your computer like a USB miner.

It is best to peg a static IP instead of DHCP, because there is no display to show the IP address assigned if on DHCP.

When you have it plugged into your network, and access the GUI through the network on your computer, does it shows the pools as "active" in the Miner Status tab?

Also check that the ribbon cable between each blade and the controller is seated properly, and didn't come loose during shipping.

Have you signed up for a pool?  Tell us which pool and we can try to help put proper settings in it.   I like antpool personally but again that's personal preference.

Hello fellow miner,  First off let me say thank you for helping me getting this fixed.


I have gotten a Bitmain s3 Miner

and a antec 500w PSU with 2 PCI-e connectors

First off let me state that im a "new miner" when it comes to Configuring etc..  Im used the usb ones where i just plug it in and use CGminer to detect it and let it run.  im new to the who s3 stuff
 
The problem i am having is i can connect to the miner to configure it to network settings/pool settings etc. but it wont actualy hash anything  i tried different pools and everything, and just to make sure the pools wernt dead i used my GPU for it and they worked.

at first i thought it was port blocked, so i took the IPV4 IP and throw it into my Asus router and port forward 3335 with that ip = nothing
I did a port range of 3335-4334  same ip = nothing

I tried changing the Ip's still nothing, I tried Using DHCP but when i do i lose all contact with the miner.

I have tried having the miner connected directly to the computer= nothing/ and even to the router=nothing
 

Trying the miner like stated below leaves me with both ethernet lights on *only the green one flashes every so often orange one stays steady* and the red light steady on no green light below it*
The psu connectors are layout as this

F=front of miner
B=back of miner
x= PCI-e plugged in
o= nothing plugged in


   x   x
f          b  = red light on but no green light/ Green ethernet light flash's orange stays steady
   o   o 

   x  o
F         b   = Red and green light steady on/ Both ethernet lights on only green flashs every so often
   x  o

   o  o
F        b  = rear fan turning at 2500RPM+ *really loud* with only red light on and Ethernet light on
   x  x

   o  x
F       B = same as 2nd shown.
   o  x

So i am wondering do i have something not configured right? or is this just a bad miner?  No temps are showing no fan speeds are showing no Chip status is shown