Hi,
Before restarting, was the production good? (Exactly, do you know if S5 controller hangs before restart (=no SSH possible before restart))
Topic: S5 Not hashing, 0 TEMP (Read 539 times)
I can sell you 2x working S5 blades
https://bitcointalksearch.org/topic/wts-give-awayfree-30-x-100-usd-bitmain-coupon-858962
0,1 BTC shipped in EU, US and Canada
https://bitcointalksearch.org/topic/wts-give-awayfree-30-x-100-usd-bitmain-coupon-858962
0,1 BTC shipped in EU, US and Canada
Hello. Just restarted my S5 miner and this is happening.
http://i63.tinypic.com/rif2pl.png
I upgraded the firmware, changed the controller, changed the psu, lowered the frequency and it doesnt fix the problem, please help
Here's some of my kernel log if you guys want to check it out
[spoiler]
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 130816
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129792 pages, LIFO batch:31
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b36000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 511MB = 511MB total
[ 0.000000] Memory: 495544k/495544k available, 28744k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000357] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015408] pid_max: default: 32768 minimum: 301
[ 0.015647] Security Framework initialized
[ 0.015744] Mount-cache hash table entries: 512
[ 0.025661] Initializing cgroup subsys cpuacct
[ 0.025692] Initializing cgroup subsys memory
[ 0.025755] Initializing cgroup subsys blkio
[ 0.025900] CPU: Testing write buffer coherency: ok
[ 0.026441] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.026517] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.027912] Brought up 1 CPUs
[ 0.027936] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.029210] devtmpfs: initialized
[ 0.093787] pinctrl core: initialized pinctrl subsystem
[ 0.094001] rstctl core: initialized rstctl subsystem
[ 0.094495] regulator-dummy: no parameters
[ 0.095005] NET: Registered protocol family 16
[ 0.095774] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.105566] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.106352] platform 49000000.edma: alias fck already exists
[ 0.106385] platform 49000000.edma: alias fck already exists
[ 0.106413] platform 49000000.edma: alias fck already exists
[ 0.107616] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.107801] OMAP GPIO hardware version 0.1
[ 0.109200] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.110475] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.111939] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.112476] of_get_named_gpio_flags exited with status 52
[ 0.112506] gpio-rctrl rstctl.3: loaded OK
[ 0.117317] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.120582] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122806] cpsw.0: No hwaddr in dt. Using 6c:ec:eb:64:50:0a from efuse
[ 0.122886] cpsw.1: No hwaddr in dt. Using 6c:ec:eb:64:50:0c from efuse
[ 0.138366] bio: create slab at 0
[ 0.150536] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150772] of_get_named_gpio_flags: can't parse gpios property
[ 0.150986] vmmcsd_fixed: 3300 mV
[ 0.154035] SCSI subsystem initialized
[ 0.154518] usbcore: registered new interface driver usbfs
[ 0.154651] usbcore: registered new interface driver hub
[ 0.154935] usbcore: registered new device driver usb
[ 0.157019] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 0.158541] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 0.160769] DCDC1: at 1500 mV
[ 0.161978] vdd_mpu: 925 <--> 1325 mV at 1100 mV
[ 0.163106] vdd_core: 925 <--> 1150 mV at 1100 mV
[ 0.164210] LDO1: at 1800 mV
[ 0.165285] LDO2: at 3300 mV
[ 0.167280] LDO3: 1800 mV
[ 0.168435] LDO4: at 3300 mV
[ 0.169423] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 0.170156] omap_i2c 44e0b000.i2c: unable to select pin group
[ 0.170864] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.173191] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.173432] media: Linux media interface: v0.10
[ 0.173537] Linux video capture interface: v2.00
[ 0.173734] pps_core: LinuxPPS API ver. 1 registered
[ 0.173751] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.174480] Advanced Linux Sound Architecture Driver Initialized.
[ 0.175705] Switching to clocksource gp_timer
[ 0.193996] NET: Registered protocol family 2
[ 0.195002] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.195145] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[ 0.195370] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.195468] TCP: reno registered
[ 0.195495] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195541] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195963] NET: Registered protocol family 1
[ 0.196533] RPC: Registered named UNIX socket transport module.
[ 0.196553] RPC: Registered udp transport module.
[ 0.196567] RPC: Registered tcp transport module.
[ 0.196581] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.196952] Trying to unpack rootfs image as initramfs...
[ 2.124842] Freeing initrd memory: 14744K
[ 2.125559] CPU PMU: probing PMU on CPU 0
[ 2.125591] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 2.126116] omap2_mbox_probe: platform not supported
[ 2.130036] VFS: Disk quotas dquot_6.5.2
[ 2.130273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.131623] NFS: Registering the id_resolver key type
[ 2.131783] Key type id_resolver registered
[ 2.131800] Key type id_legacy registered
[ 2.131866] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 2.132320] msgmni has been set to 996
[ 2.135181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.135208] io scheduler noop registered
[ 2.135224] io scheduler deadline registered
[ 2.135276] io scheduler cfq registered (default)
[ 2.137138] tps65217-bl tps65217-bl: no platform data provided
[ 2.137179] tps65217-bl: probe of tps65217-bl failed with error -22
[ 2.138068] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.140825] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 2.141109] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.858606] console [ttyO0] enabled
[ 2.863511] [drm] Initialized drm 1.1.0 20060810
[ 2.882136] brd: module loaded
[ 2.892383] loop: module loaded
[ 2.895847] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.903136] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.910411] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.917681] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.924952] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.962940] bone-capemgr bone_capemgr.8: bone: scan failed (1 time)
[ 3.501999] bone-capemgr bone_capemgr.8: bone: scan failed (2 time)
[ 4.041056] bone-capemgr bone_capemgr.8: bone: scan failed (3 time)
[ 4.580117] bone-capemgr bone_capemgr.8: bone: scan failed (4 time)
[ 5.119180] bone-capemgr bone_capemgr.8: bone: scan failed (5 time)
[ 5.658242] bone-capemgr bone_capemgr.8: bone: scan failed (6 time)
[ 6.197311] bone-capemgr bone_capemgr.8: bone: scan failed (7 time)
[ 6.736367] bone-capemgr bone_capemgr.8: bone: scan failed (8 time)
[ 7.275430] bone-capemgr bone_capemgr.8: bone: scan failed (9 time)
[ 7.814492] bone-capemgr bone_capemgr.8: bone: scan failed (10 time)
[ 8.322477] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom
[ 8.329545] bone-capemgr: probe of bone_capemgr.8 failed with error -110
[ 8.339102] nand_get_flash_type: 2c,da against 2c,da
[ 8.344627] ONFI param page 0 valid
[ 8.348301] ONFI flash detected
[ 8.351620] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[ 8.363533] omap2-nand: detected x8 NAND flash
[ 8.368196] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 8.373800] omap2-nand: using custom ecc layout
[ 8.378638] 10 ofpart partitions found on MTD device omap2-nand.0
[ 8.385032] Creating 10 MTD partitions on "omap2-nand.0":
[ 8.390706] 0x000000000000-0x000000020000 : "spl"
[ 8.397567] 0x000000020000-0x000000040000 : "spl_backup1"
[ 8.405010] 0x000000040000-0x000000060000 : "spl_backup2"
[ 8.412416] 0x000000060000-0x000000080000 : "spl_backup3"
[ 8.419687] 0x000000080000-0x000000240000 : "u-boot"
[ 8.427958] 0x000000240000-0x000000260000 : "bootenv"
[ 8.434922] 0x000000260000-0x000000280000 : "fdt"
[ 8.441539] 0x000000280000-0x000000780000 : "kernel"
[ 8.452545] 0x000000800000-0x000001c00000 : "root"
[ 8.475967] 0x000001c00000-0x000003000000 : "config"
[ 8.499739] OneNAND driver initializing
[ 8.507246] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
[ 8.514538] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
[ 8.524819] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
[ 8.532107] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
[ 8.541361] usbcore: registered new interface driver asix
[ 8.547206] usbcore: registered new interface driver cdc_ether
[ 8.553491] usbcore: registered new interface driver smsc95xx
[ 8.559612] usbcore: registered new interface driver net1080
[ 8.565634] usbcore: registered new interface driver cdc_subset
[ 8.571945] usbcore: registered new interface driver zaurus
[ 8.577933] usbcore: registered new interface driver cdc_ncm
[ 8.584678] usbcore: registered new interface driver cdc_acm
[ 8.590636] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.599015] Initializing USB Mass Storage driver...
[ 8.604239] usbcore: registered new interface driver usb-storage
[ 8.610539] USB Mass Storage support registered.
[ 8.615572] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 8.622234] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 8.627474] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.636239] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.636260] musb-hdrc: MHDRC RTL version 2.0
[ 8.636276] musb-hdrc: setup fifo_mode 4
[ 8.636304] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.636456] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 8.641500] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 8.647453] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 8.652697] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.661461] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.661480] musb-hdrc: MHDRC RTL version 2.0
[ 8.661494] musb-hdrc: setup fifo_mode 4
[ 8.661517] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.661635] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 8.666676] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 8.671984] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 8.678388] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 8.686629] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 8.686741] usb usb1: default language 0x0409
[ 8.686799] usb usb1: udev 1, busnum 1, minor = 0
[ 8.686822] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.693952] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.701523] usb usb1: Product: MUSB HDRC host driver
[ 8.706738] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 8.712405] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 8.718274] usb usb1: usb_probe_device
[ 8.718302] usb usb1: configuration #1 chosen from 1 choice
[ 8.718367] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 8.718577] hub 1-0:1.0: usb_probe_interface
[ 8.718599] hub 1-0:1.0: usb_probe_interface - got id
[ 8.718626] hub 1-0:1.0: USB hub found
[ 8.722715] hub 1-0:1.0: 1 port detected
[ 8.726854] hub 1-0:1.0: standalone hub
[ 8.726873] hub 1-0:1.0: individual port power switching
[ 8.726892] hub 1-0:1.0: no over-current protection
[ 8.726909] hub 1-0:1.0: Single TT
[ 8.726930] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 8.726950] hub 1-0:1.0: power on to power good time: 10ms
[ 8.726993] hub 1-0:1.0: local power source is good
[ 8.727099] hub 1-0:1.0: enabling power on all ports
[ 8.728148] mousedev: PS/2 mouse device common for all mice
[ 8.736514] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 8.744303] i2c /dev entries driver
[ 8.749700] pps_ldisc: PPS line discipline registered
[ 8.755181] Driver for 1-wire Dallas network protocol.
[ 8.762422] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 8.769983] cpuidle: using governor ladder
[ 8.774306] cpuidle: using governor menu
[ 8.778846] of_get_named_gpio_flags exited with status 6
[ 8.778865] of_get_named_gpio_flags: can't parse gpios property
[ 8.778881] of_get_named_gpio_flags: can't parse gpios property
[ 8.778917] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 8.786154] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 8.792940] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 8.800147] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 8.807512] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 8.814441] omap_hsmmc mmc.4: pins are not configured from the driver
[ 8.828296] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 8.848245] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
[ 8.859942] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
[ 8.867247] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[ 8.876229] leds-gpio gpio-leds.7: pins are not configured from the driver
[ 8.883490] of_get_named_gpio_flags exited with status 53
[ 8.883515] of_get_named_gpio_flags exited with status 54
[ 8.883536] of_get_named_gpio_flags exited with status 55
[ 8.883557] of_get_named_gpio_flags exited with status 56
[ 8.883624] of_get_named_gpio_flags exited with status 53
[ 8.883921] of_get_named_gpio_flags exited with status 54
[ 8.884137] of_get_named_gpio_flags exited with status 55
[ 8.884325] of_get_named_gpio_flags exited with status 56
[ 8.884934] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.891650] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 8.898848] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 8.906966] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 8.913253] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 8.920450] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 8.932885] usbcore: registered new interface driver usbhid
[ 8.938804] usbhid: USB HID core driver
[ 8.945750] TCP: cubic registered
[ 8.949265] Initializing XFRM netlink socket
[ 8.953822] NET: Registered protocol family 17
[ 8.958644] NET: Registered protocol family 15
[ 8.963484] Key type dns_resolver registered
[ 8.968126] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 8.976242] ThumbEE CPU extension supported.
[ 8.980848] Registering SWP/SWPB emulation handler
[ 8.986843] registered taskstats version 1
[ 9.043033] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 9.049445] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 9.063858] libphy: 4a101000.mdio: probed
[ 9.068165] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 9.078035] Detected MACID = 6c:ec:eb:64:50:0a
[ 9.082716] cpsw 4a100000.ethernet: NAPI disabled
[ 9.089369] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 9.105636] ALSA device list:
[ 9.108777] No soundcards found.
[ 9.112962] Freeing init memory: 264K
[ 9.116877] Failed to execute /init
[ 9.378674] compile Jul 15 2015--15:36:05
[ 9.383003] CM_PER_SPI1_CLKCTRL 0x10002
[ 9.387048] spi_vaddr 0xfa1a0000
[ 9.390429] version 0x40300a0b
[ 9.393621] OMAP2_MCSPI_SYSSTATUS 0x1
[ 9.397448] OMAP2_MCSPI_MODULCTRL 0x1
[ 9.401270] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 9.410216] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 9.422188] hash ok
[ 9.424442] hashtest OK
[ 9.427262] bitmain-asic: success to register device
[ 9.436907] Detect hardware version = 4
[ 9.440990] fix hardware version
[ 9.444373] hardware_version = 0x4
[ 9.448050] S5 ctrl board test V1.1
[ 9.451802] pwm_percent{20}
[ 9.454900] bitmain_asic_open ok
[ 10.814951] stop send work to all chain
[ 10.820161] Sending open core work
[ 10.825086] Send new block cmd
[ 10.929705] pwm_percent{20}
[ 10.932638] timeout {0x1b57}
[ 10.935650] rev timeout {0x571b0080}
[ 10.939476] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[ 10.947658] send BC data:
[ 10.947658] 0x0000: 0x03 0x00 0x00 0x00 0x86 0x10 0x1a 0x17
[ 10.957041] send BC data:
[ 10.957041] 0x0000: 0x03 0x01 0x00 0x00 0x86 0x10 0x1a 0x17
[ 11.084004] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[ 11.092459] send BC data:
[ 11.092459] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.103526] send BC data:
[ 11.103526] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.230481] bitmain_asic_close
[ 11.495006] jffs2: Empty flash at 0x0046189c ends at 0x00462000
[ 11.903379] jffs2: notice: (147) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 12.754115] net eth0: initializing cpsw version 1.12 (0)
[ 12.761831] net eth0: phy found : id is : 0x7c0f1
[ 12.766769] libphy: PHY 4a101000.mdio:01 not found
[ 12.771785] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 15.840376] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 32.733093] bitmain-asic: success to unregister device
[ 33.755159] compile Jul 15 2015--15:36:05
[ 33.759469] CM_PER_SPI1_CLKCTRL 0x2
[ 33.763137] spi_vaddr 0xfa1a0000
[ 33.766514] version 0x40300a0b
[ 33.769708] OMAP2_MCSPI_SYSSTATUS 0x1
[ 33.773540] OMAP2_MCSPI_MODULCTRL 0x1
[ 33.777380] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 33.782476] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 33.789652] hash ok
[ 33.791878] hashtest OK
[ 33.794674] bitmain-asic: success to register device
[ 33.923630] Detect hardware version = 4
[ 33.927754] fix hardware version
[ 33.931137] hardware_version = 0x4
[ 33.941782] S5 ctrl board test V1.1
[ 33.947436] pwm_percent{20}
[ 33.955319] bitmain_asic_open ok
[ 33.973943] Detect device
[ 33.976821] soft ctrl rst time
[ 33.980367] reset hash asic
[ 33.983798] clear FPGA nonce buffer
[ 34.986364] soft ctrl rst time
[ 34.989665] reset hash asic
[ 34.992603] clear FPGA nonce buffer
[ 36.095740] clear FPGA nonce buffer
[ 36.099562] get chain0 reg0x0
[ 36.102676] send BC data:
[ 36.102676] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.209062] chain0 total asic:0
[ 36.212351] clear FPGA nonce buffer
[ 36.216133] get chain1 reg0x0
[ 36.219240] send BC data:
[ 36.219240] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.326257] chain1 total asic:0
[ 36.329568] total chain_num{2}
[ 36.332768] FPGA detect asic addr err
[ 36.332768]
[ 36.338139]
[ 36.338139]
[ 36.338139] !!!!Restart1 detect asic addr!!!
[ 36.338139]
[ 36.347222] clear FPGA nonce buffer
[ 36.351009] get chain0 reg0x0
[ 36.354118] send BC data:
[ 36.354118] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.461064] chain0 total asic:0
[ 36.464370] clear FPGA nonce buffer
[ 36.468153] get chain1 reg0x0
[ 36.471266] send BC data:
[ 36.471266] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.578211] chain1 total asic:0
[ 36.581537] total chain_num{2}
[ 36.584734] FPGA detect asic addr err
[ 36.584734]
[ 36.590110]
[ 36.590110]
[ 36.590110] !!!!Restart2 detect asic addr!!!
[ 36.590110]
[ 36.599188] clear FPGA nonce buffer
[ 36.603089] get chain0 reg0x0
[ 36.606200] send BC data:
[ 36.606200] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.712980] chain0 total asic:0
[ 36.716281] clear FPGA nonce buffer
[ 36.720070] get chain1 reg0x0
[ 36.723174] send BC data:
[ 36.723174] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.830149] chain1 total asic:0
[ 36.833449] total chain_num{2}
[ 36.836640] FPGA detect asic addr err
[ 36.836640]
[ 36.842012]
[ 36.842012]
[ 36.842012] !!!!Restart3 detect asic addr!!!
[ 36.842012]
[ 36.851106] clear FPGA nonce buffer
[ 36.854890] get chain0 reg0x0
[ 36.857998] send BC data:
[ 36.857998] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.964939] chain0 total asic:0
[ 36.968238] clear FPGA nonce buffer
[ 36.972021] get chain1 reg0x0
[ 36.975131] send BC data:
[ 36.975131] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 37.082128] chain1 total asic:0
[ 37.085443] total chain_num{2}
[ 37.088638] FPGA detect asic addr err
[ 37.088638]
[ 37.094022] S5 board
[ 37.096316] S5 board
[ 37.098602]
[ 37.098602]
[ 37.098602] !!!!soft set defult asic num 30!!!
[ 37.098602]
[ 37.107866] clear FPGA nonce buffer
[ 37.416440] btm_tx_conf
[ 37.419052] fan pwm valid {100}
[ 37.422342] Set asic frequency {350}
[ 37.426084] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x6}cmd_buf[3]{0xc6}
[ 37.434440] send BC data:
[ 37.434440] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x06 0xc6
[ 37.445320] send BC data:
[ 37.445320] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x06 0xc6
[ 37.572281] Set chip_addr{0x0}reg_address{0x4}value{0x820d}
[ 37.578121] timeout {0x1b57}
[ 37.581162] rev timeout {0x571b0080}
[ 37.585184] close chain0 core
[ 37.588300] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4}
[/spoiler]
http://i63.tinypic.com/rif2pl.png
I upgraded the firmware, changed the controller, changed the psu, lowered the frequency and it doesnt fix the problem, please help
Here's some of my kernel log if you guys want to check it out
[spoiler]
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 130816
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129792 pages, LIFO batch:31
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b36000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
- 0
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 511MB = 511MB total
[ 0.000000] Memory: 495544k/495544k available, 28744k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000357] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015408] pid_max: default: 32768 minimum: 301
[ 0.015647] Security Framework initialized
[ 0.015744] Mount-cache hash table entries: 512
[ 0.025661] Initializing cgroup subsys cpuacct
[ 0.025692] Initializing cgroup subsys memory
[ 0.025755] Initializing cgroup subsys blkio
[ 0.025900] CPU: Testing write buffer coherency: ok
[ 0.026441] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.026517] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.027912] Brought up 1 CPUs
[ 0.027936] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.029210] devtmpfs: initialized
[ 0.093787] pinctrl core: initialized pinctrl subsystem
[ 0.094001] rstctl core: initialized rstctl subsystem
[ 0.094495] regulator-dummy: no parameters
[ 0.095005] NET: Registered protocol family 16
[ 0.095774] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.105566] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.106352] platform 49000000.edma: alias fck already exists
[ 0.106385] platform 49000000.edma: alias fck already exists
[ 0.106413] platform 49000000.edma: alias fck already exists
[ 0.107616] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.107801] OMAP GPIO hardware version 0.1
[ 0.109200] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.110475] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.111939] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.112476] of_get_named_gpio_flags exited with status 52
[ 0.112506] gpio-rctrl rstctl.3: loaded OK
[ 0.117317] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.120582] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122806] cpsw.0: No hwaddr in dt. Using 6c:ec:eb:64:50:0a from efuse
[ 0.122886] cpsw.1: No hwaddr in dt. Using 6c:ec:eb:64:50:0c from efuse
[ 0.138366] bio: create slab
[ 0.150536] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150772] of_get_named_gpio_flags: can't parse gpios property
[ 0.150986] vmmcsd_fixed: 3300 mV
[ 0.154035] SCSI subsystem initialized
[ 0.154518] usbcore: registered new interface driver usbfs
[ 0.154651] usbcore: registered new interface driver hub
[ 0.154935] usbcore: registered new device driver usb
[ 0.157019] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 0.158541] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 0.160769] DCDC1: at 1500 mV
[ 0.161978] vdd_mpu: 925 <--> 1325 mV at 1100 mV
[ 0.163106] vdd_core: 925 <--> 1150 mV at 1100 mV
[ 0.164210] LDO1: at 1800 mV
[ 0.165285] LDO2: at 3300 mV
[ 0.167280] LDO3: 1800 mV
[ 0.168435] LDO4: at 3300 mV
[ 0.169423] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 0.170156] omap_i2c 44e0b000.i2c: unable to select pin group
[ 0.170864] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.173191] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.173432] media: Linux media interface: v0.10
[ 0.173537] Linux video capture interface: v2.00
[ 0.173734] pps_core: LinuxPPS API ver. 1 registered
[ 0.173751] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.174480] Advanced Linux Sound Architecture Driver Initialized.
[ 0.175705] Switching to clocksource gp_timer
[ 0.193996] NET: Registered protocol family 2
[ 0.195002] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.195145] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[ 0.195370] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.195468] TCP: reno registered
[ 0.195495] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195541] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195963] NET: Registered protocol family 1
[ 0.196533] RPC: Registered named UNIX socket transport module.
[ 0.196553] RPC: Registered udp transport module.
[ 0.196567] RPC: Registered tcp transport module.
[ 0.196581] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.196952] Trying to unpack rootfs image as initramfs...
[ 2.124842] Freeing initrd memory: 14744K
[ 2.125559] CPU PMU: probing PMU on CPU 0
[ 2.125591] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 2.126116] omap2_mbox_probe: platform not supported
[ 2.130036] VFS: Disk quotas dquot_6.5.2
[ 2.130273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.131623] NFS: Registering the id_resolver key type
[ 2.131783] Key type id_resolver registered
[ 2.131800] Key type id_legacy registered
[ 2.131866] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 2.132320] msgmni has been set to 996
[ 2.135181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.135208] io scheduler noop registered
[ 2.135224] io scheduler deadline registered
[ 2.135276] io scheduler cfq registered (default)
[ 2.137138] tps65217-bl tps65217-bl: no platform data provided
[ 2.137179] tps65217-bl: probe of tps65217-bl failed with error -22
[ 2.138068] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.140825] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 2.141109] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.858606] console [ttyO0] enabled
[ 2.863511] [drm] Initialized drm 1.1.0 20060810
[ 2.882136] brd: module loaded
[ 2.892383] loop: module loaded
[ 2.895847] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.903136] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.910411] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.917681] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.924952] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.962940] bone-capemgr bone_capemgr.8: bone: scan failed (1 time)
[ 3.501999] bone-capemgr bone_capemgr.8: bone: scan failed (2 time)
[ 4.041056] bone-capemgr bone_capemgr.8: bone: scan failed (3 time)
[ 4.580117] bone-capemgr bone_capemgr.8: bone: scan failed (4 time)
[ 5.119180] bone-capemgr bone_capemgr.8: bone: scan failed (5 time)
[ 5.658242] bone-capemgr bone_capemgr.8: bone: scan failed (6 time)
[ 6.197311] bone-capemgr bone_capemgr.8: bone: scan failed (7 time)
[ 6.736367] bone-capemgr bone_capemgr.8: bone: scan failed (8 time)
[ 7.275430] bone-capemgr bone_capemgr.8: bone: scan failed (9 time)
[ 7.814492] bone-capemgr bone_capemgr.8: bone: scan failed (10 time)
[ 8.322477] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom
[ 8.329545] bone-capemgr: probe of bone_capemgr.8 failed with error -110
[ 8.339102] nand_get_flash_type: 2c,da against 2c,da
[ 8.344627] ONFI param page 0 valid
[ 8.348301] ONFI flash detected
[ 8.351620] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[ 8.363533] omap2-nand: detected x8 NAND flash
[ 8.368196] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 8.373800] omap2-nand: using custom ecc layout
[ 8.378638] 10 ofpart partitions found on MTD device omap2-nand.0
[ 8.385032] Creating 10 MTD partitions on "omap2-nand.0":
[ 8.390706] 0x000000000000-0x000000020000 : "spl"
[ 8.397567] 0x000000020000-0x000000040000 : "spl_backup1"
[ 8.405010] 0x000000040000-0x000000060000 : "spl_backup2"
[ 8.412416] 0x000000060000-0x000000080000 : "spl_backup3"
[ 8.419687] 0x000000080000-0x000000240000 : "u-boot"
[ 8.427958] 0x000000240000-0x000000260000 : "bootenv"
[ 8.434922] 0x000000260000-0x000000280000 : "fdt"
[ 8.441539] 0x000000280000-0x000000780000 : "kernel"
[ 8.452545] 0x000000800000-0x000001c00000 : "root"
[ 8.475967] 0x000001c00000-0x000003000000 : "config"
[ 8.499739] OneNAND driver initializing
[ 8.507246] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
[ 8.514538] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
[ 8.524819] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
[ 8.532107] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
[ 8.541361] usbcore: registered new interface driver asix
[ 8.547206] usbcore: registered new interface driver cdc_ether
[ 8.553491] usbcore: registered new interface driver smsc95xx
[ 8.559612] usbcore: registered new interface driver net1080
[ 8.565634] usbcore: registered new interface driver cdc_subset
[ 8.571945] usbcore: registered new interface driver zaurus
[ 8.577933] usbcore: registered new interface driver cdc_ncm
[ 8.584678] usbcore: registered new interface driver cdc_acm
[ 8.590636] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.599015] Initializing USB Mass Storage driver...
[ 8.604239] usbcore: registered new interface driver usb-storage
[ 8.610539] USB Mass Storage support registered.
[ 8.615572] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 8.622234] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 8.627474] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.636239] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.636260] musb-hdrc: MHDRC RTL version 2.0
[ 8.636276] musb-hdrc: setup fifo_mode 4
[ 8.636304] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.636456] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 8.641500] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 8.647453] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 8.652697] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.661461] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.661480] musb-hdrc: MHDRC RTL version 2.0
[ 8.661494] musb-hdrc: setup fifo_mode 4
[ 8.661517] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.661635] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 8.666676] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 8.671984] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 8.678388] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 8.686629] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 8.686741] usb usb1: default language 0x0409
[ 8.686799] usb usb1: udev 1, busnum 1, minor = 0
[ 8.686822] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.693952] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.701523] usb usb1: Product: MUSB HDRC host driver
[ 8.706738] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 8.712405] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 8.718274] usb usb1: usb_probe_device
[ 8.718302] usb usb1: configuration #1 chosen from 1 choice
[ 8.718367] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 8.718577] hub 1-0:1.0: usb_probe_interface
[ 8.718599] hub 1-0:1.0: usb_probe_interface - got id
[ 8.718626] hub 1-0:1.0: USB hub found
[ 8.722715] hub 1-0:1.0: 1 port detected
[ 8.726854] hub 1-0:1.0: standalone hub
[ 8.726873] hub 1-0:1.0: individual port power switching
[ 8.726892] hub 1-0:1.0: no over-current protection
[ 8.726909] hub 1-0:1.0: Single TT
[ 8.726930] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 8.726950] hub 1-0:1.0: power on to power good time: 10ms
[ 8.726993] hub 1-0:1.0: local power source is good
[ 8.727099] hub 1-0:1.0: enabling power on all ports
[ 8.728148] mousedev: PS/2 mouse device common for all mice
[ 8.736514] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 8.744303] i2c /dev entries driver
[ 8.749700] pps_ldisc: PPS line discipline registered
[ 8.755181] Driver for 1-wire Dallas network protocol.
[ 8.762422] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 8.769983] cpuidle: using governor ladder
[ 8.774306] cpuidle: using governor menu
[ 8.778846] of_get_named_gpio_flags exited with status 6
[ 8.778865] of_get_named_gpio_flags: can't parse gpios property
[ 8.778881] of_get_named_gpio_flags: can't parse gpios property
[ 8.778917] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 8.786154] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 8.792940] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 8.800147] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 8.807512] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 8.814441] omap_hsmmc mmc.4: pins are not configured from the driver
[ 8.828296] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 8.848245] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
[ 8.859942] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
[ 8.867247] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[ 8.876229] leds-gpio gpio-leds.7: pins are not configured from the driver
[ 8.883490] of_get_named_gpio_flags exited with status 53
[ 8.883515] of_get_named_gpio_flags exited with status 54
[ 8.883536] of_get_named_gpio_flags exited with status 55
[ 8.883557] of_get_named_gpio_flags exited with status 56
[ 8.883624] of_get_named_gpio_flags exited with status 53
[ 8.883921] of_get_named_gpio_flags exited with status 54
[ 8.884137] of_get_named_gpio_flags exited with status 55
[ 8.884325] of_get_named_gpio_flags exited with status 56
[ 8.884934] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.891650] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 8.898848] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 8.906966] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 8.913253] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 8.920450] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 8.932885] usbcore: registered new interface driver usbhid
[ 8.938804] usbhid: USB HID core driver
[ 8.945750] TCP: cubic registered
[ 8.949265] Initializing XFRM netlink socket
[ 8.953822] NET: Registered protocol family 17
[ 8.958644] NET: Registered protocol family 15
[ 8.963484] Key type dns_resolver registered
[ 8.968126] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 8.976242] ThumbEE CPU extension supported.
[ 8.980848] Registering SWP/SWPB emulation handler
[ 8.986843] registered taskstats version 1
[ 9.043033] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 9.049445] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 9.063858] libphy: 4a101000.mdio: probed
[ 9.068165] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 9.078035] Detected MACID = 6c:ec:eb:64:50:0a
[ 9.082716] cpsw 4a100000.ethernet: NAPI disabled
[ 9.089369] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 9.105636] ALSA device list:
[ 9.108777] No soundcards found.
[ 9.112962] Freeing init memory: 264K
[ 9.116877] Failed to execute /init
[ 9.378674] compile Jul 15 2015--15:36:05
[ 9.383003] CM_PER_SPI1_CLKCTRL 0x10002
[ 9.387048] spi_vaddr 0xfa1a0000
[ 9.390429] version 0x40300a0b
[ 9.393621] OMAP2_MCSPI_SYSSTATUS 0x1
[ 9.397448] OMAP2_MCSPI_MODULCTRL 0x1
[ 9.401270] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 9.410216] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 9.422188] hash ok
[ 9.424442] hashtest OK
[ 9.427262] bitmain-asic: success to register device
[ 9.436907] Detect hardware version = 4
[ 9.440990] fix hardware version
[ 9.444373] hardware_version = 0x4
[ 9.448050] S5 ctrl board test V1.1
[ 9.451802] pwm_percent{20}
[ 9.454900] bitmain_asic_open ok
[ 10.814951] stop send work to all chain
[ 10.820161] Sending open core work
[ 10.825086] Send new block cmd
[ 10.929705] pwm_percent{20}
[ 10.932638] timeout {0x1b57}
[ 10.935650] rev timeout {0x571b0080}
[ 10.939476] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[ 10.947658] send BC data:
[ 10.947658] 0x0000: 0x03 0x00 0x00 0x00 0x86 0x10 0x1a 0x17
[ 10.957041] send BC data:
[ 10.957041] 0x0000: 0x03 0x01 0x00 0x00 0x86 0x10 0x1a 0x17
[ 11.084004] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[ 11.092459] send BC data:
[ 11.092459] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.103526] send BC data:
[ 11.103526] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.230481] bitmain_asic_close
[ 11.495006] jffs2: Empty flash at 0x0046189c ends at 0x00462000
[ 11.903379] jffs2: notice: (147) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 12.754115] net eth0: initializing cpsw version 1.12 (0)
[ 12.761831] net eth0: phy found : id is : 0x7c0f1
[ 12.766769] libphy: PHY 4a101000.mdio:01 not found
[ 12.771785] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 15.840376] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 32.733093] bitmain-asic: success to unregister device
[ 33.755159] compile Jul 15 2015--15:36:05
[ 33.759469] CM_PER_SPI1_CLKCTRL 0x2
[ 33.763137] spi_vaddr 0xfa1a0000
[ 33.766514] version 0x40300a0b
[ 33.769708] OMAP2_MCSPI_SYSSTATUS 0x1
[ 33.773540] OMAP2_MCSPI_MODULCTRL 0x1
[ 33.777380] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 33.782476] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 33.789652] hash ok
[ 33.791878] hashtest OK
[ 33.794674] bitmain-asic: success to register device
[ 33.923630] Detect hardware version = 4
[ 33.927754] fix hardware version
[ 33.931137] hardware_version = 0x4
[ 33.941782] S5 ctrl board test V1.1
[ 33.947436] pwm_percent{20}
[ 33.955319] bitmain_asic_open ok
[ 33.973943] Detect device
[ 33.976821] soft ctrl rst time
[ 33.980367] reset hash asic
[ 33.983798] clear FPGA nonce buffer
[ 34.986364] soft ctrl rst time
[ 34.989665] reset hash asic
[ 34.992603] clear FPGA nonce buffer
[ 36.095740] clear FPGA nonce buffer
[ 36.099562] get chain0 reg0x0
[ 36.102676] send BC data:
[ 36.102676] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.209062] chain0 total asic:0
[ 36.212351] clear FPGA nonce buffer
[ 36.216133] get chain1 reg0x0
[ 36.219240] send BC data:
[ 36.219240] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.326257] chain1 total asic:0
[ 36.329568] total chain_num{2}
[ 36.332768] FPGA detect asic addr err
[ 36.332768]
[ 36.338139]
[ 36.338139]
[ 36.338139] !!!!Restart1 detect asic addr!!!
[ 36.338139]
[ 36.347222] clear FPGA nonce buffer
[ 36.351009] get chain0 reg0x0
[ 36.354118] send BC data:
[ 36.354118] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.461064] chain0 total asic:0
[ 36.464370] clear FPGA nonce buffer
[ 36.468153] get chain1 reg0x0
[ 36.471266] send BC data:
[ 36.471266] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.578211] chain1 total asic:0
[ 36.581537] total chain_num{2}
[ 36.584734] FPGA detect asic addr err
[ 36.584734]
[ 36.590110]
[ 36.590110]
[ 36.590110] !!!!Restart2 detect asic addr!!!
[ 36.590110]
[ 36.599188] clear FPGA nonce buffer
[ 36.603089] get chain0 reg0x0
[ 36.606200] send BC data:
[ 36.606200] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.712980] chain0 total asic:0
[ 36.716281] clear FPGA nonce buffer
[ 36.720070] get chain1 reg0x0
[ 36.723174] send BC data:
[ 36.723174] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.830149] chain1 total asic:0
[ 36.833449] total chain_num{2}
[ 36.836640] FPGA detect asic addr err
[ 36.836640]
[ 36.842012]
[ 36.842012]
[ 36.842012] !!!!Restart3 detect asic addr!!!
[ 36.842012]
[ 36.851106] clear FPGA nonce buffer
[ 36.854890] get chain0 reg0x0
[ 36.857998] send BC data:
[ 36.857998] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.964939] chain0 total asic:0
[ 36.968238] clear FPGA nonce buffer
[ 36.972021] get chain1 reg0x0
[ 36.975131] send BC data:
[ 36.975131] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 37.082128] chain1 total asic:0
[ 37.085443] total chain_num{2}
[ 37.088638] FPGA detect asic addr err
[ 37.088638]
[ 37.094022] S5 board
[ 37.096316] S5 board
[ 37.098602]
[ 37.098602]
[ 37.098602] !!!!soft set defult asic num 30!!!
[ 37.098602]
[ 37.107866] clear FPGA nonce buffer
[ 37.416440] btm_tx_conf
[ 37.419052] fan pwm valid {100}
[ 37.422342] Set asic frequency {350}
[ 37.426084] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x6}cmd_buf[3]{0xc6}
[ 37.434440] send BC data:
[ 37.434440] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x06 0xc6
[ 37.445320] send BC data:
[ 37.445320] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x06 0xc6
[ 37.572281] Set chip_addr{0x0}reg_address{0x4}value{0x820d}
[ 37.578121] timeout {0x1b57}
[ 37.581162] rev timeout {0x571b0080}
[ 37.585184] close chain0 core
[ 37.588300] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4}
[/spoiler]
Jump to: