HW errors on my unit are 0 (one total sometimes... maybe) when running at 600 and 650.
HWE goes up to ~.0300 or so which is on par with the S3's at stock settings I have.
My meaning of good power was a breaker wired to a PSU cord.
The power supply used was a Coolmax 1600. Has a combined 160A of 12V capability.
Clocked at 450, fan speed 35% HWE 0.101 current 37* temp Sometimes upwards of 60* on a hot day.
Ironic when clocked this much lower it gets not that many HW errors.
But I don't want to be drawing >1000w where I have it plugged in.
HWE goes up to ~.0300 or so which is on par with the S3's at stock settings I have.
My meaning of good power was a breaker wired to a PSU cord.
The power supply used was a Coolmax 1600. Has a combined 160A of 12V capability.
Clocked at 450, fan speed 35% HWE 0.101 current 37* temp Sometimes upwards of 60* on a hot day.
Ironic when clocked this much lower it gets not that many HW errors.
But I don't want to be drawing >1000w where I have it plugged in.
Ok, i will check on the ANtminer PSU, i am aware that DPS bbb2000, from IBM is capable to deliver 200A on each rail as i have tried it out on a sp20.
Tought back then it was to much and cooling was bad on sp20.
i had it polling 3.5Ghz at arout 1900watts. , dps bb2000 is capable of s upporting 2500w as i am ware on tests done ..
