Author

Topic: S7 fail signal after 1 minute after start (Read 782 times)

newbie
Activity: 2
Merit: 0
May 07, 2016, 08:28:34 AM
#5
the fans sensor wire could be bad.   when the gear fires up for the 1 or 2 minutes do you get a fan rpm number?


Also what batch number is the fan?
Yeap! You are right. It was a problem with fan wire. Fan has cutted it's wire by it's blade)) Fixed wire, now miner runs successfully.

P.S. two fans on my S7
legendary
Activity: 2464
Merit: 1710
Electrical engineer. Mining since 2014.
It could be a faulty beaglebone, looks like. Is this miner new? If it's still got warranty on it you should try to contact bitmain, but to me it appears either the io or the beaglebone is malfunctioning in some way. I'm not an expert in software, but it just looks like that. If bitmain doesn't respond to you or this is used, just buy a new antminer  beaglebone. Not sure if it's io or the actual board,  so just hang in there. Could also be faulty firmware which looks more likely as there is empty flashed space. Search for kano software here, and you should come to the page. Kano's got nearly 0% chance of bricking, so it's not harmful if it doesn't work and imo it has better guis.
Kano has no custom firmware or updated cgminer for Antminer S7.

The newest firmware (20th April 2016) for 2-fan, 4.73Th, 700Mhz -model is  S7-20160420-700M-2fan-4320.tar.gz
https://bitmaintech.com/support.htm?pid=00720151023101739550pOBiK5sO06A0
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
the fans sensor wire could be bad.   when the gear fires up for the 1 or 2 minutes do you get a fan rpm number?


Also what batch number is the fan?
legendary
Activity: 1624
Merit: 1130
Bitcoin FTW!
It could be a faulty beaglebone, looks like. Is this miner new? If it's still got warranty on it you should try to contact bitmain, but to me it appears either the io or the beaglebone is malfunctioning in some way. I'm not an expert in software, but it just looks like that. If bitmain doesn't respond to you or this is used, just buy a new antminer  beaglebone. Not sure if it's io or the actual board,  so just hang in there. Could also be faulty firmware which looks more likely as there is empty flashed space. Search for kano software here, and you should come to the page. Kano's got nearly 0% chance of bricking, so it's not harmful if it doesn't work and imo it has better guis.
newbie
Activity: 2
Merit: 0
Hello!

My S7 starts, connect to my pool, start mining hashrate goes up to 3-4 TH/s, and after 1 minute it stops mining and beep fail signal.

ssh dmesg output tells this:


root@antMiner:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0934000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:
  • 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 236132k/236132k available, 26012k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000356] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015412] pid_max: default: 32768 minimum: 301
[    0.015643] Security Framework initialized
[    0.015737] Mount-cache hash table entries: 512
[    0.025660] Initializing cgroup subsys cpuacct
[    0.025693] Initializing cgroup subsys memory
[    0.025757] Initializing cgroup subsys blkio
[    0.025897] CPU: Testing write buffer coherency: ok
[    0.026431] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.026507] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.027895] Brought up 1 CPUs
[    0.027919] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.029216] devtmpfs: initialized
[    0.093755] pinctrl core: initialized pinctrl subsystem
[    0.093970] rstctl core: initialized rstctl subsystem
[    0.094465] regulator-dummy: no parameters
[    0.094982] NET: Registered protocol family 16
[    0.095746] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.105528] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.106309] platform 49000000.edma: alias fck already exists
[    0.106342] platform 49000000.edma: alias fck already exists
[    0.106370] platform 49000000.edma: alias fck already exists
[    0.107587] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.107770] OMAP GPIO hardware version 0.1
[    0.109112] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.110433] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.111896] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.112432] of_get_named_gpio_flags exited with status 52
[    0.112463] gpio-rctrl rstctl.3: loaded OK
[    0.117272] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.120545] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122750] cpsw.0: No hwaddr in dt. Using a0:f6:fd:29:35:ee from efuse
[    0.122783] cpsw.1: No hwaddr in dt. Using a0:f6:fd:29:35:f0 from efuse
[    0.138282] bio: create slab at 0
[    0.150428] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.150661] of_get_named_gpio_flags: can't parse gpios property
[    0.150878] vmmcsd_fixed: 3300 mV
[    0.153938] SCSI subsystem initialized
[    0.154423] usbcore: registered new interface driver usbfs
[    0.154557] usbcore: registered new interface driver hub
[    0.154832] usbcore: registered new device driver usb
[    0.156895] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    0.158415] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
[    0.160178] DCDC1: at 1500 mV
[    0.161324] vdd_mpu: 925 <--> 1325 mV at 1325 mV
[    0.162495] vdd_core: 925 <--> 1150 mV at 1100 mV
[    0.163591] LDO1: at 1800 mV
[    0.164735] LDO2: at 3300 mV
[    0.166701] LDO3: 1800 mV
[    0.167860] LDO4: at 3300 mV
[    0.168851] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[    0.169543] omap_i2c 44e0b000.i2c: unable to select pin group
[    0.170337] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[    0.172678] omap_i2c 4819c000.i2c: unable to select pin group
[    0.172917] media: Linux media interface: v0.10
[    0.173020] Linux video capture interface: v2.00
[    0.173144] pps_core: LinuxPPS API ver. 1 registered
[    0.173160] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.174037] Advanced Linux Sound Architecture Driver Initialized.
[    0.175192] Switching to clocksource gp_timer
[    0.193464] NET: Registered protocol family 2
[    0.194475] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.194564] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.194655] TCP: Hash tables configured (established 2048 bind 2048)
[    0.194749] TCP: reno registered
[    0.194776] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.194892] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.195311] NET: Registered protocol family 1
[    0.195873] RPC: Registered named UNIX socket transport module.
[    0.195893] RPC: Registered udp transport module.
[    0.195908] RPC: Registered tcp transport module.
[    0.195921] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.196292] Trying to unpack rootfs image as initramfs...
[    2.122749] Freeing initrd memory: 14776K
[    2.123419] CPU PMU: probing PMU on CPU 0
[    2.123451] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    2.123974] omap2_mbox_probe: platform not supported
[    2.127880] VFS: Disk quotas dquot_6.5.2
[    2.128115] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.129494] NFS: Registering the id_resolver key type
[    2.129586] Key type id_resolver registered
[    2.129604] Key type id_legacy registered
[    2.129671] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    2.130121] msgmni has been set to 490
[    2.132961] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.132987] io scheduler noop registered
[    2.133004] io scheduler deadline registered
[    2.133055] io scheduler cfq registered (default)
[    2.134865] tps65217-bl tps65217-bl: no platform data provided
[    2.134904] tps65217-bl: probe of tps65217-bl failed with error -22
[    2.135817] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.138586] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    2.138872] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.855934] console [ttyO0] enabled
[    2.860777] [drm] Initialized drm 1.1.0 20060810
[    2.879426] brd: module loaded
[    2.889685] loop: module loaded
[    2.893143] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.900433] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.907733] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.915002] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.922270] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    2.960473] bone-capemgr bone_capemgr.8: bone: scan failed (1 time)
[    3.499534] bone-capemgr bone_capemgr.8: bone: scan failed (2 time)
[    4.038591] bone-capemgr bone_capemgr.8: bone: scan failed (3 time)
[    4.577652] bone-capemgr bone_capemgr.8: bone: scan failed (4 time)
[    5.116715] bone-capemgr bone_capemgr.8: bone: scan failed (5 time)
[    5.655777] bone-capemgr bone_capemgr.8: bone: scan failed (6 time)
[    6.194843] bone-capemgr bone_capemgr.8: bone: scan failed (7 time)
[    6.733903] bone-capemgr bone_capemgr.8: bone: scan failed (8 time)
[    7.272965] bone-capemgr bone_capemgr.8: bone: scan failed (9 time)
[    7.812027] bone-capemgr bone_capemgr.8: bone: scan failed (10 time)
[    8.320008] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom
[    8.327078] bone-capemgr: probe of bone_capemgr.8 failed with error -110
[    8.336613] nand_get_flash_type: 2c,da against 2c,da
--- cut here ---
[    9.423505] hash ok
[    9.425754] hashtest OK
[    9.428576] bitmain-asic: success to register device
[    9.438172] Detect hardware version = 4
[    9.442258] fix hardware version
[    9.445648] hardware_version = 0x4
[    9.449327] S5 ctrl board test V1.1
[    9.453242] bitmain_asic_open ok
[   10.812490] stop send work to all chain
[   10.817701] Sending open core work
[   10.822635] Send new block cmd
[   10.927239] Division by zero in kernel.
[   10.931294] [] (unwind_backtrace+0x1/0x8c) from [] (Ldiv0+0x9/0x12)
[   10.939719] [] (Ldiv0+0x9/0x12) from [] (nonce_query+0x4e/0xe4 [bitmain_spi])
[   10.949030] [] (nonce_query+0x4e/0xe4 [bitmain_spi]) from [] (bitmain_asic_close+0x68/0x114 [bitmain_spi])
[   10.960952] [] (bitmain_asic_close+0x68/0x114 [bitmain_spi]) from [] (__fput+0x9b/0x154)
[   10.971222] [] (__fput+0x9b/0x154) from [] (task_work_run+0x79/0x8c)
[   10.979691] [] (task_work_run+0x79/0x8c) from [] (do_work_pending+0x51/0x5c)
[   10.988875] [] (do_work_pending+0x51/0x5c) from [] (work_pending+0x9/0x1a)
[   10.997876] timeout {0x189b}
[   11.000895] rev timeout {0x9b180080}
[   11.004765] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[   11.012956] send BC data:
[   11.012956] 0x0000: 0x03 0x00 0x00 0x00 0x86 0x10 0x1a 0x17
[   11.026845] send BC data:
[   11.026845] 0x0000: 0x03 0x02 0x00 0x00 0x86 0x10 0x1a 0x17
[   11.044418] send BC data:
[   11.044418] 0x0000: 0x03 0x05 0x00 0x00 0x86 0x10 0x1a 0x17
[   11.155752] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[   11.164206] send BC data:
[   11.164206] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[   11.179184] send BC data:
[   11.179184] 0x0000: 0x03 0x02 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[   11.196763] send BC data:
[   11.196763] 0x0000: 0x03 0x05 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[   11.308096] bitmain_asic_close
[   11.690976] jffs2: jffs2_scan_dirent_node(): Name CRC failed on node at 0x00dc0fd0: Read 0xd0c945cf, calculated 0x3bc53398
[   11.759288] jffs2: Empty flash at 0x00dc1004 ends at 0x00dc1800
[   11.906536] jffs2: notice: (148) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   12.753254] net eth0: initializing cpsw version 1.12 (0)
[   12.761077] net eth0: phy found : id is : 0x7c0f1
[   12.766066] libphy: PHY 4a101000.mdio:01 not found
[   12.771103] net eth0: phy 4a101000.mdio:01 not found on slave 1
[   15.837931] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[   31.460875] bitmain-asic: success to unregister device
[   32.484541] compile Apr 20 2016--17:35:14
[   32.488799] CM_PER_SPI1_CLKCTRL 0x2
[   32.492468] spi_vaddr 0xfa1a0000
[   32.495966] version 0x40300a0b
[   32.499179] OMAP2_MCSPI_SYSSTATUS 0x1
[   32.503013] OMAP2_MCSPI_MODULCTRL 0x1
[   32.506867] OMAP2_MCSPI_CHCONF0 0x180103c5
[   32.511235] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[   32.518355] hash ok
[   32.520571] hashtest OK
[   32.523362] bitmain-asic: success to register device
[   32.652106] Detect hardware version = 4
[   32.656187] fix hardware version
[   32.659570] hardware_version = 0x4
[   32.669610] S5 ctrl board test V1.1
[   32.677345] bitmain_asic_open ok
[   32.696042] Detect device
[   32.698873] soft ctrl rst time
[   32.704861] reset hash asic
[   32.708257] clear FPGA nonce buffer
[   33.712431] soft ctrl rst time
[   33.715733] reset hash asic
[   33.718664] clear FPGA nonce buffer
[   34.821783] get chain0 reg0x0
[   34.824921] send BC data:
[   34.824921] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[   34.931221] asic cmd return 00988513
--- cut here ---
[   35.097612] asic cmd return 00988513
[   35.101440] chain0 total asic:45
[   35.104832] pos0--addr:00
--- cut here ---
[   35.228698] pos44--addr:00
[   35.231534] chain0_asic_exist{0xffffffff}
[   35.235733] get chain2 reg0x0
[   35.238840] send BC data:
[   35.238840] 0x0000: 0x03 0x02 0x00 0x1a 0x84 0x00 0x00 0x11
[   35.345299] asic cmd return 00988513
--- cut here ---
[   35.511674] asic cmd return 00988513
[   35.515508] chain2 total asic:45
[   35.518905] pos0--addr:00
[   35.521655] pos1--addr:00
[   35.524401] pos2--addr:00
[   35.527146] pos3--addr:00
[   35.529890] pos4--addr:00
[   35.532629] pos5--addr:00
[   35.535369] pos6--addr:00
[   35.538116] pos7--addr:00
[   35.540863] pos8--addr:00
[   35.543607] pos9--addr:00
[   35.546359] pos10--addr:00
[   35.549195] pos11--addr:00
[   35.552033] pos12--addr:00
[   35.554866] pos13--addr:00
[   35.557698] pos14--addr:00
[   35.560535] pos15--addr:00
[   35.563373] pos16--addr:00
[   35.566209] pos17--addr:00
[   35.569045] pos18--addr:00
[   35.571886] pos19--addr:00
[   35.574717] pos20--addr:00
[   35.577550] pos21--addr:00
[   35.580385] pos22--addr:00
[   35.583220] pos23--addr:00
[   35.586056] pos24--addr:00
[   35.588889] pos25--addr:00
[   35.591723] pos26--addr:00
[   35.594557] pos27--addr:00
[   35.597395] pos28--addr:00
[   35.600227] pos29--addr:00
[   35.603055] pos30--addr:00
[   35.605889] pos31--addr:00
[   35.608731] pos32--addr:00
[   35.611566] pos33--addr:00
[   35.614398] pos34--addr:00
[   35.617230] pos35--addr:00
[   35.620059] pos36--addr:00
[   35.622897] pos37--addr:00
[   35.625729] pos38--addr:00
[   35.628562] pos39--addr:00
[   35.631393] pos40--addr:00
[   35.634228] pos41--addr:00
[   35.637064] pos42--addr:00
[   35.639906] pos43--addr:00
[   35.642739] pos44--addr:00
[   35.645576] chain2_asic_exist{0xffffffff}
[   35.649779] get chain5 reg0x0
[   35.652883] send BC data:
[   35.652883] 0x0000: 0x03 0x05 0x00 0x1a 0x84 0x00 0x00 0x11
[   35.759336] asic cmd return 00988513
[   35.763093] asic cmd return 00988513
[   35.766840] asic cmd return 00988513
[   35.770586] asic cmd return 00988513
[   35.774329] asic cmd return 00988513
[   35.778134] asic cmd return 00988513
[   35.781875] asic cmd return 00988513
[   35.785615] asic cmd return 00988513
[   35.789358] asic cmd return 00988513
[   35.793102] asic cmd return 00988513
[   35.796903] asic cmd return 00988513
[   35.800649] asic cmd return 00988513
[   35.804385] asic cmd return 00988513
[   35.808126] asic cmd return 00988513
[   35.811867] asic cmd return 00988513
[   35.815668] asic cmd return 00988513
[   35.819412] asic cmd return 00988513
[   35.823153] asic cmd return 00988513
[   35.826892] asic cmd return 00988513
[   35.830632] asic cmd return 00988513
[   35.834432] asic cmd return 00988513
[   35.838173] asic cmd return 00988513
[   35.841919] asic cmd return 00988513
[   35.845660] asic cmd return 00988513
[   35.849404] asic cmd return 00988513
[   35.853201] asic cmd return 00988513
[   35.856941] asic cmd return 00988513
[   35.860679] asic cmd return 00988513
[   35.864425] asic cmd return 00988513
[   35.868170] asic cmd return 00988513
[   35.871986] asic cmd return 00988513
[   35.875727] asic cmd return 00988513
[   35.879468] asic cmd return 00988513
[   35.883207] asic cmd return 00988513
[   35.886945] asic cmd return 00988513
[   35.890755] asic cmd return 00988513
[   35.894494] asic cmd return 00988513
[   35.898245] asic cmd return 00988513
[   35.901989] asic cmd return 00988513
[   35.905734] asic cmd return 00988513
[   35.909756] asic cmd return 00988513
[   35.913512] asic cmd return 00988513
[   35.917254] asic cmd return 00988513
[   35.921007] asic cmd return 00988513
[   35.924746] asic cmd return 00988513
[   35.929898] chain5 total asic:45
[   35.933296] pos0--addr:00
[   35.936045] pos1--addr:00
[   35.938793] pos2--addr:00
[   35.941536] pos3--addr:00
[   35.944279] pos4--addr:00
[   35.947020] pos5--addr:00
[   35.949767] pos6--addr:00
[   35.952512] pos7--addr:00
[   35.955254] pos8--addr:00
[   35.958002] pos9--addr:00
[   35.960748] pos10--addr:00
[   35.963586] pos11--addr:00
[   35.966427] pos12--addr:00
[   35.969268] pos13--addr:00
[   35.972104] pos14--addr:00
[   35.974940] pos15--addr:00
[   35.977774] pos16--addr:00
[   35.980610] pos17--addr:00
[   35.983450] pos18--addr:00
[   35.986279] pos19--addr:00
[   35.989109] pos20--addr:00
[   35.991941] pos21--addr:00
[   35.994780] pos22--addr:00
[   35.997618] pos23--addr:00
[   36.000456] pos24--addr:00
[   36.003292] pos25--addr:00
[   36.006148] pos26--addr:00
[   36.008989] pos27--addr:00
[   36.011823] pos28--addr:00
[   36.014656] pos29--addr:00
[   36.017504] pos30--addr:00
[   36.020337] pos31--addr:00
[   36.023179] pos32--addr:00
[   36.026013] pos33--addr:00
[   36.028861] pos34--addr:00
[   36.031693] pos35--addr:00
[   36.034530] pos36--addr:00
[   36.037363] pos37--addr:00
[   36.040196] pos38--addr:00
[   36.043028] pos39--addr:00
[   36.045864] pos40--addr:00
[   36.048695] pos41--addr:00
[   36.051527] pos42--addr:00
[   36.054370] pos43--addr:00
[   36.057202] pos44--addr:00
[   36.060038] chain5_asic_exist{0xffffffff}
[   36.064237] total chain_num{3}
[   36.067439] chain0 chain_map 0
[   36.070645] chain0 asic_num--64 actual--45
[   36.074926] chain0 sw addr interval 5
[   36.078758] chain1 chain_map 2
[   36.081955] chain1 asic_num--64 actual--45
[   36.086240] chain1 sw addr interval 5
[   36.090079] chain2 chain_map 5
[   36.093277] chain2 asic_num--64 actual--45
[   36.097566] chain2 sw addr interval 5
[   36.101399] clear FPGA nonce buffer
[   36.410004] btm_tx_conf
[   36.412614] fan pwm valid {100}
[   36.415914] Set asic frequency {700}
[   36.419660] Set chip_addr{0x0}reg_address{0x4}value{0x8207}
[   36.425500] pll reg_data 0x8207
[   36.428786] close pic cmd_buf[0]: 0x66, cmd_buf[1]: 0x99, cmd_buf[2]: 0x77, cmd_buf[3]: 0xc5
[   36.437601] send BC data:
[   36.437601] 0x0000: 0x03 0x00 0x00 0x1a 0x66 0x99 0x77 0xc5
[   36.452625] send BC data:
[   36.452625] 0x0000: 0x03 0x02 0x00 0x1a 0x66 0x99 0x77 0xc5
[   36.470200] send BC data:
[   36.470200] 0x0000: 0x03 0x05 0x00 0x1a 0x66 0x99 0x77 0xc5
[   36.581538] send BC data:
[   36.581538] 0x0000: 0x03 0x00 0x00 0x1a 0x66 0x99 0x77 0xc5
[   36.604964] send BC data:
[   36.604964] 0x0000: 0x03 0x02 0x00 0x1a 0x66 0x99 0x77 0xc5
[   36.632311] send BC data:
[   36.632311] 0x0000: 0x03 0x05 0x00 0x1a 0x66 0x99 0x77 0xc5
[   36.753466] send BC data:
[   36.753466] 0x0000: 0x03 0x00 0x00 0x1a 0x66 0x99 0x77 0xc5
[   36.776899] send BC data:
[   36.776899] 0x0000: 0x03 0x02 0x00 0x1a 0x66 0x99 0x77 0xc5
[   36.794426] send BC data:
[   36.794426] 0x0000: 0x03 0x05 0x00 0x1a 0x66 0x99 0x77 0xc5
[   36.905753] timeout {0x1a5a}
[   36.908772] rev timeout {0x5a1a0080}
[   36.912675] set freq = 700
[   36.915525] Freq 700, PLL1 00070040, PLL2 0220
[   36.920173] PLL1 0x70040, PLL2 0x220
[   36.923919] plldivider1 cmd_buf[0]{0x7}cmd_buf[1]{0x7}cmd_buf[2]{0x0}cmd_buf[3]{0x56}
[   36.932114] send BC data:
[   36.932114] 0x0000: 0x03 0x00 0x00 0x1a 0x07 0x07 0x00 0x56
[   36.940906] plldivider2 cmd_buf[0]{0x82}cmd_buf[1]{0x0}cmd_buf[2]{0x2}cmd_buf[3]{0x20}
[   36.949178] send BC data:
[   36.949178] 0x0000: 0x03 0x00 0x00 0x1a 0x82 0x00 0x02 0x20
[   36.958481] chain0 inactive
[   36.961409] send BC data:
[   36.961409] 0x0000: 0x03 0x00 0x00 0x1a 0x85 0x00 0x00 0x0f
[   36.972156] send BC data:
[   36.972156] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x00 0x00 0x19
[   36.987780] send BC data:
[   36.987780] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x05 0x00 0x01
[   37.003426] send BC data:
[   37.003426] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x0a 0x00 0x0c
[   37.019030] send BC data:
[   37.019030] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x0f 0x00 0x14
[   37.034655] send BC data:
[   37.034655] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x14 0x00 0x16
[   37.050280] send BC data:
[   37.050280] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x19 0x00 0x08
[   37.065905] send BC data:
[   37.065905] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x1e 0x00 0x03
[   37.081530] send BC data:
[   37.081530] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x23 0x00 0x09
[   37.097155] send BC data:
[   37.097155] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x28 0x00 0x07
[   37.112780] send BC data:
[   37.112780] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x2d 0x00 0x1f
[   37.128405] send BC data:
[   37.128405] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x32 0x00 0x1e
[   37.145990] send BC data:
[   37.145990] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x37 0x00 0x06
[   37.161610] send BC data:
[   37.161610] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x3c 0x00 0x08
[   37.177234] send BC data:
[   37.177234] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x41 0x00 0x17
[   37.192858] send BC data:
[   37.192858] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x46 0x00 0x1c
[   37.208483] send BC data:
[   37.208483] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x4b 0x00 0x02
[   37.224108] send BC data:
[   37.224108] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x50 0x00 0x00
[   37.239733] send BC data:
[   37.239733] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x55 0x00 0x18
[   37.255358] send BC data:
[   37.255358] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x5a 0x00 0x15
[   37.270983] send BC data:
[   37.270983] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x5f 0x00 0x0d
[   37.286617] send BC data:
[   37.286617] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x64 0x00 0x17
[   37.302233] send BC data:
[   37.302233] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x69 0x00 0x09
[   37.317859] send BC data:
[   37.317859] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x6e 0x00 0x02
[   37.333483] send BC data:
[   37.333483] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x73 0x00 0x10
[   37.349108] send BC data:
[   37.349108] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x78 0x00 0x1e
[   37.364736] send BC data:
[   37.364736] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x7d 0x00 0x06
[   37.380358] send BC data:
[   37.380358] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x82 0x00 0x05
[   37.395983] send BC data:
[   37.395983] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x87 0x00 0x1d
[   37.411608] send BC data:
[   37.411608] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x8c 0x00 0x13
[   37.427233] send BC data:
[   37.427233] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x91 0x00 0x01
[   37.442858] send BC data:
[   37.442858] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x96 0x00 0x0a
[   37.458483] send BC data:
[   37.458483] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x9b 0x00 0x14
[   37.474108] send BC data:
[   37.474108] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xa0 0x00 0x0e
[   37.489734] send BC data:
[   37.489734] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xa5 0x00 0x16
[   37.505358] send BC data:
[   37.505358] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xaa 0x00 0x1b
[   37.520987] send BC data:
[   37.520987] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xaf 0x00 0x03
[   37.536606] send BC data:
[   37.536606] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xb4 0x00 0x01
[   37.554190] send BC data:
[   37.554190] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xb9 0x00 0x1f
[   37.569812] send BC data:
[   37.569812] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xbe 0x00 0x14
[   37.585437] send BC data:
[   37.585437] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xc3 0x00 0x0b
[   37.601061] send BC data:
[   37.601061] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xc8 0x00 0x05
[   37.618663] send BC data:
[   37.618663] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xcd 0x00 0x1d
[   37.634270] send BC data:
[   37.634270] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xd2 0x00 0x1c
[   37.649889] send BC data:
[   37.649889] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xd7 0x00 0x04
[   37.665521] send BC data:
[   37.665521] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xdc 0x00 0x0a
[   37.681143] send BC data:
[   37.681143] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xe1 0x00 0x00
[   37.696765] send BC data:
[   37.696765] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xe6 0x00 0x0b
[   37.712390] send BC data:
[   37.712390] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xeb 0x00 0x15
[   37.728015] send BC data:
[   37.728015] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xf0 0x00 0x17
[   37.743640] send BC data:
[   37.743640] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xf5 0x00 0x0f
[   37.759275] send BC data:
[   37.759275] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xfa 0x00 0x02
[   37.774896] plldivider1 cmd_buf[0]{0x7}cmd_buf[1]{0x7}cmd_buf[2]{0x0}cmd_buf[3]{0x56}
[   37.783073] send BC data:
[   37.783073] 0x0000: 0x03 0x02 0x00 0x1a 0x07 0x07 0x00 0x56
[   37.790512] plldivider2 cmd_buf[0]{0x82}cmd_buf[1]{0x0}cmd_buf[2]{0x2}cmd_buf[3]{0x20}
[   37.798791] send BC data:
[   37.798791] 0x0000: 0x03 0x02 0x00 0x1a 0x82 0x00 0x02 0x20
[   37.808115] chain2 inactive
[   37.811047] send BC data:
[   37.811047] 0x0000: 0x03 0x02 0x00 0x1a 0x85 0x00 0x00 0x0f
[   37.821769] send BC data:
[   37.821769] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x00 0x00 0x19
[   37.837389] send BC data:
[   37.837389] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x05 0x00 0x01
[   37.853015] send BC data:
[   37.853015] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x0a 0x00 0x0c
[   37.868640] send BC data:
[   37.868640] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x0f 0x00 0x14
[   37.884265] send BC data:
[   37.884265] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x14 0x00 0x16
[   37.899890] send BC data:
[   37.899890] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x19 0x00 0x08
[   37.915515] send BC data:
[   37.915515] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x1e 0x00 0x03
[   37.931151] send BC data:
[   37.931151] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x23 0x00 0x09
[   37.946814] send BC data:
[   37.946814] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x28 0x00 0x07
[   37.962391] send BC data:
[   37.962391] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x2d 0x00 0x1f
[   37.978015] send BC data:
[   37.978015] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x32 0x00 0x1e
[   37.993640] send BC data:
[   37.993640] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x37 0x00 0x06
[   38.009461] send BC data:
[   38.009461] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x3c 0x00 0x08
[   38.024898] send BC data:
[   38.024898] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x41 0x00 0x17
[   38.040516] send BC data:
[   38.040516] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x46 0x00 0x1c
[   38.056160] send BC data:
[   38.056160] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x4b 0x00 0x02
[   38.071768] send BC data:
[   38.071768] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x50 0x00 0x00
[   38.087390] send BC data:
[   38.087390] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x55 0x00 0x18
[   38.103015] send BC data:
[   38.103015] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x5a 0x00 0x15
[   38.118640] send BC data:
[   38.118640] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x5f 0x00 0x0d
[   38.134264] send BC data:
[   38.134264] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x64 0x00 0x17
[   38.149890] send BC data:
[   38.149890] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x69 0x00 0x09
[   38.165514] send BC data:
[   38.165514] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x6e 0x00 0x02
[   38.181140] send BC data:
[   38.181140] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x73 0x00 0x10
[   38.196765] send BC data:
[   38.196765] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x78 0x00 0x1e
[   38.212390] send BC data:
[   38.212390] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x7d 0x00 0x06
[   38.228031] send BC data:
[   38.228031] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x82 0x00 0x05
[   38.243642] send BC data:
[   38.243642] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x87 0x00 0x1d
[   38.259266] send BC data:
[   38.259266] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x8c 0x00 0x13
[   38.274888] send BC data:
[   38.274888] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x91 0x00 0x01
[   38.290517] send BC data:
[   38.290517] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x96 0x00 0x0a
[   38.306141] send BC data:
[   38.306141] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0x9b 0x00 0x14
[   38.321765] send BC data:
[   38.321765] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xa0 0x00 0x0e
[   38.337390] send BC data:
[   38.337390] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xa5 0x00 0x16
[   38.353017] send BC data:
[   38.353017] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xaa 0x00 0x1b
[   38.368642] send BC data:
[   38.368642] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xaf 0x00 0x03
[   38.384265] send BC data:
[   38.384265] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xb4 0x00 0x01
[   38.399890] send BC data:
[   38.399890] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xb9 0x00 0x1f
[   38.419526] send BC data:
[   38.419526] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xbe 0x00 0x14
[   38.440936] send BC data:
[   38.440936] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xc3 0x00 0x0b
[   38.472170] send BC data:
[   38.472170] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xc8 0x00 0x05
[   38.501475] send BC data:
[   38.501475] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xcd 0x00 0x1d
[   38.524907] send BC data:
[   38.524907] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xd2 0x00 0x1c
[   38.540521] send BC data:
[   38.540521] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xd7 0x00 0x04
[   38.556140] send BC data:
[   38.556140] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xdc 0x00 0x0a
[   38.571766] send BC data:
[   38.571766] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xe1 0x00 0x00
[   38.587390] send BC data:
[   38.587390] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xe6 0x00 0x0b
[   38.603014] send BC data:
[   38.603014] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xeb 0x00 0x15
[   38.618640] send BC data:
[   38.618640] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xf0 0x00 0x17
[   38.634277] send BC data:
[   38.634277] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xf5 0x00 0x0f
[   38.649891] send BC data:
[   38.649891] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xfa 0x00 0x02
[   38.665544] plldivider1 cmd_buf[0]{0x7}cmd_buf[1]{0x7}cmd_buf[2]{0x0}cmd_buf[3]{0x56}
[   38.673740] send BC data:
[   38.673740] 0x0000: 0x03 0x05 0x00 0x1a 0x07 0x07 0x00 0x56
[   38.683094] plldivider2 cmd_buf[0]{0x82}cmd_buf[1]{0x0}cmd_buf[2]{0x2}cmd_buf[3]{0x20}
[   38.691366] send BC data:
[   38.691366] 0x0000: 0x03 0x05 0x00 0x1a 0x82 0x00 0x02 0x20
[   38.700668] chain5 inactive
[   38.703594] send BC data:
[   38.703594] 0x0000: 0x03 0x05 0x00 0x1a 0x85 0x00 0x00 0x0f
[   38.714344] send BC data:
[   38.714344] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x00 0x00 0x19
[   38.729968] send BC data:
[   38.729968] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x05 0x00 0x01
[   38.745591] send BC data:
[   38.745591] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x0a 0x00 0x0c
[   38.763176] send BC data:
[   38.763176] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x0f 0x00 0x14
[   38.778798] send BC data:
[   38.778798] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x14 0x00 0x16
[   38.794422] send BC data:
[   38.794422] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x19 0x00 0x08
[   38.810046] send BC data:
[   38.810046] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x1e 0x00 0x03
[   38.825673] send BC data:
[   38.825673] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x23 0x00 0x09
[   38.841296] send BC data:
[   38.841296] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x28 0x00 0x07
[   38.856921] send BC data:
[   38.856921] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x2d 0x00 0x1f
[   38.872546] send BC data:
[   38.872546] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x32 0x00 0x1e
[   38.888169] send BC data:
[   38.888169] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x37 0x00 0x06
[   38.903796] send BC data:
[   38.903796] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x3c 0x00 0x08
[   38.919421] send BC data:
[   38.919421] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x41 0x00 0x17
[   38.935046] send BC data:
[   38.935046] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x46 0x00 0x1c
[   38.950673] send BC data:
[   38.950673] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x4b 0x00 0x02
[   38.966297] send BC data:
[   38.966297] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x50 0x00 0x00
[   38.981921] send BC data:
[   38.981921] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x55 0x00 0x18
[   38.997545] send BC data:
[   38.997545] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x5a 0x00 0x15
[   39.013171] send BC data:
[   39.013171] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x5f 0x00 0x0d
[   39.028794] send BC data:
[   39.028794] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x64 0x00 0x17
[   39.044421] send BC data:
[   39.044421] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x69 0x00 0x09
[   39.060046] send BC data:
[   39.060046] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x6e 0x00 0x02
[   39.075671] send BC data:
[   39.075671] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x73 0x00 0x10
[   39.091296] send BC data:
[   39.091296] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x78 0x00 0x1e
[   39.106921] send BC data:
[   39.106921] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x7d 0x00 0x06
[   39.122546] send BC data:
[   39.122546] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x82 0x00 0x05
[   39.138169] send BC data:
[   39.138169] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x87 0x00 0x1d
[   39.153794] send BC data:
[   39.153794] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x8c 0x00 0x13
[   39.171377] send BC data:
[   39.171377] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x91 0x00 0x01
[   39.187000] send BC data:
[   39.187000] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x96 0x00 0x0a
[   39.202624] send BC data:
[   39.202624] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x9b 0x00 0x14
[   39.218249] send BC data:
[   39.218249] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xa0 0x00 0x0e
[   39.233874] send BC data:
[   39.233874] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xa5 0x00 0x16
[   39.249499] send BC data:
[   39.249499] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xaa 0x00 0x1b
[   39.265124] send BC data:
[   39.265124] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xaf 0x00 0x03
[   39.280760] send BC data:
[   39.280760] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xb4 0x00 0x01
[   39.296375] send BC data:
[   39.296375] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xb9 0x00 0x1f
[   39.311999] send BC data:
[   39.311999] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xbe 0x00 0x14
[   39.327624] send BC data:
[   39.327624] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xc3 0x00 0x0b
[   39.343252] send BC data:
[   39.343252] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xc8 0x00 0x05
[   39.358874] send BC data:
[   39.358874] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xcd 0x00 0x1d
[   39.374499] send BC data:
[   39.374499] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xd2 0x00 0x1c
[   39.390124] send BC data:
[   39.390124] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xd7 0x00 0x04
[   39.405749] send BC data:
[   39.405749] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xdc 0x00 0x0a
[   39.421372] send BC data:
[   39.421372] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xe1 0x00 0x00
[   39.436999] send BC data:
[   39.436999] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xe6 0x00 0x0b
[   39.452624] send BC data:
[   39.452624] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xeb 0x00 0x15
[   39.468249] send BC data:
[   39.468249] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xf0 0x00 0x17
[   39.483874] send BC data:
[   39.483874] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xf5 0x00 0x0f
[   39.499500] send BC data:
[   39.499500] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0xfa 0x00 0x02
[   39.515127] send BC data:
[   39.515127] 0x0000: 0x03 0x00 0x00 0x1a 0x86 0x10 0x03 0x13
[   39.522928] send BC data:
[   39.522928] 0x0000: 0x03 0x02 0x00 0x1a 0x86 0x10 0x03 0x13
[   39.530742] send BC data:
[   39.530742] 0x0000: 0x03 0x05 0x00 0x1a 0x86 0x10 0x03 0x13
[   39.538554] send BC data:
[   39.538554] 0x0000: 0x03 0x20 0x00 0x03 0x86 0x10 0x03 0x04
[   39.545927] bauddiv 3
[   39.548215] gateblk2 83
[   39.550966] timeout {0x1cac6}
[   39.554076] rev timeout {0xc6ca0180}
[   39.557885] open core
[   39.560268] send BC data:
[   39.560268] 0x0000: 0x03 0x00 0x00 0x03 0x86 0x00 0x83 0x00
[   39.577626] send BC data:
[   39.577626] 0x0000: 0x03 0x02 0x00 0x03 0x86 0x00 0x83 0x00
[   39.593250] send BC data:
[   39.593250] 0x0000: 0x03 0x05 0x00 0x03 0x86 0x00 0x83 0x00
[   39.608876] Sending open core work
[   39.612436] Send new block cmd
[   39.624933] Timeout {1}
[   39.627507] Snd Time Interval {21}ms
[   39.631246] Set bitmain configure
[   39.634707] clear FPGA nonce buffer
[   39.638483] drv fifo empty
[   39.657806]
[   39.657806]  error_fan 5, normal_fan 1, fan_num 1
[   40.653009] get chain0 reg0x0
[   40.656179] send BC data:
[   40.656179] 0x0000: 0x03 0x00 0x00 0x03 0x84 0x00 0x00 0x11
[   40.665558] Change diff to 8
[   40.668712] diff fix to 6
[   40.671467] Change net_diff to 38
[   40.675380] asic cmd return 00988513
[   40.679229] Chain0 PLL: {0x13859800}
[   40.682983] asic cmd return 05988513
[   40.686729] Chain0 PLL: {0x13859805}
[   40.690470] asic cmd return 0a988513
[   40.694210] Chain0 PLL: {0x1385980a}
[   40.697962] asic cmd return 0f988513
[   40.701698] Chain0 PLL: {0x1385980f}
[   40.705433] asic cmd return 14988513
[   40.709178] Chain0 PLL: {0x13859814}
[   40.720408] asic cmd return 19988513
[   40.724178] Chain0 PLL: {0x13859819}
[   40.727928] asic cmd return 1e988513
[   40.731670] Chain0 PLL: {0x1385981e}
[   40.735411] asic cmd return 23988513
[   40.739157] Chain0 PLL: {0x13859823}
[   40.743031] asic cmd return 28988513
[   40.746778] Chain0 PLL: {0x13859828}
[   40.750521] asic cmd return 2d988513
[   40.754262] Chain0 PLL: {0x1385982d}
[   40.778828] asic cmd return 32988513
[   40.782670] Chain0 PLL: {0x13859832}
[   40.786417] asic cmd return 37988513
[   40.790159] Chain0 PLL: {0x13859837}
[   40.793905] asic cmd return 3c988513
[   40.797655] Chain0 PLL: {0x1385983c}
[   40.801396] asic cmd return 41988513
[   40.805137] Chain0 PLL: {0x13859841}
[   40.808875] asic cmd return 46988513
[   40.812614] Chain0 PLL: {0x13859846}
[   40.831797] asic cmd return 4b988513
[   40.835719] Chain0 PLL: {0x1385984b}
[   40.839510] asic cmd return 50988513
[   40.843258] Chain0 PLL: {0x13859850}
[   40.846994] asic cmd return 55988513
[   40.850738] Chain0 PLL: {0x13859855}
[   40.854472] asic cmd return 5a988513
[   40.858218] Chain0 PLL: {0x1385985a}
[   40.861956] asic cmd return 5f988513
[   40.865692] Chain0 PLL: {0x1385985f}
[   40.873633] asic cmd return 64988513
[   40.877398] Chain0 PLL: {0x13859864}
[   40.881149] asic cmd return 69988513
[   40.884886] Chain0 PLL: {0x13859869}
[   40.888627] asic cmd return 6e988513
[   40.892368] Chain0 PLL: {0x1385986e}
[   40.896107] asic cmd return 73988513
[   40.899851] Chain0 PLL: {0x13859873}
[   40.903595] asic cmd return 78988513
[   40.907332] Chain0 PLL: {0x13859878}
[   40.968487] asic cmd return 7d988513
[   40.972263] Chain0 PLL: {0x1385987d}
[   40.976007] asic cmd return 82988513
[   40.979744] Chain0 PLL: {0x13859882}
[   40.983486] asic cmd return 87988513
[   40.987224] Chain0 PLL: {0x13859887}
[   40.991041] asic cmd return 8c988513
[   40.994791] Chain0 PLL: {0x1385988c}
[   40.998524] asic cmd return 91988513
[   41.002266] Chain0 PLL: {0x13859891}
[   41.010629] asic cmd return 96988513
[   41.014391] Chain0 PLL: {0x13859896}
[   41.018149] asic cmd return 9b988513
[   41.021896] Chain0 PLL: {0x1385989b}
[   41.025638] asic cmd return a0988513
[   41.029377] Chain0 PLL: {0x138598a0}
[   41.033119] asic cmd return a5988513
[   41.036856] Chain0 PLL: {0x138598a5}
[   41.040593] asic cmd return aa988513
[   41.044334] Chain0 PLL: {0x138598aa}
[   41.086082] asic cmd return af988513
[   41.089853] Chain0 PLL: {0x138598af}
[   41.093595] asic cmd return b4988513
[   41.097335] Chain0 PLL: {0x138598b4}
[   41.101073] asic cmd return b9988513
[   41.104819] Chain0 PLL: {0x138598b9}
[   41.108557] asic cmd return be988513
[   41.112298] Chain0 PLL: {0x138598be}
[   41.116039] asic cmd return c3988513
[   41.119783] Chain0 PLL: {0x138598c3}
[   41.124162] asic cmd return c8988513
[   41.127923] Chain0 PLL: {0x138598c8}
[   41.131670] asic cmd return cd988513
[   41.135415] Chain0 PLL: {0x138598cd}
[   41.139154] asic cmd return d2988513
[   41.142901] Chain0 PLL: {0x138598d2}
[   41.146639] asic cmd return d7988513
[   41.150376] Chain0 PLL: {0x138598d7}
[   41.154117] asic cmd return dc988513
[   41.157857] Chain0 PLL: {0x138598dc}
[   41.681308] timeout {0x542}
[   41.684263] rev timeout {0x42050080}
[   42.876588] Send new block cmd
[   48.362348] Change diff to 10
[   48.365532] diff fix to 6
[   48.368380] Send new block cmd
[   49.659761]
[   49.659761]  error_fan 5, normal_fan 1, fan_num 1
[   59.679379]
[   59.679379]  error_fan 5, normal_fan 1, fan_num 1
[   68.351172] ch0-as1: dev->task_buffer_wr{0x00000f75}rd{0x000016c2}ret work_id{0x95e3} don't match task_buffer_match{0x15e3}
[   69.698798]
[   69.698798]  error_fan 5, normal_fan 1, fan_num 1
[   79.718405]
[   79.718405]  error_fan 5, normal_fan 1, fan_num 1
[   89.737921]
[   89.737921]  error_fan 5, normal_fan 1, fan_num 1
[   92.851486] stop send work to all chain
[   92.855557] Send new block cmd
[   92.970304] timeout {0x1a5a}
[   92.973350] rev timeout {0x5a1a0080}
[   92.986023] ch5-as19: dev->task_buffer_wr{0x0000111d}rd{0x00001a08}ret work_id{0x991b} don't match task_buffer_match{0x191b}
[   92.997908] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[   93.006116] send BC data:
[   93.006116] 0x0000: 0x03 0x00 0x00 0x03 0x86 0x10 0x1a 0x17
[   93.024467] send BC data:
[   93.024467] 0x0000: 0x03 0x02 0x00 0x03 0x86 0x10 0x1a 0x17
[   93.031951] send BC data:
[   93.031951] 0x0000: 0x03 0x05 0x00 0x03 0x86 0x10 0x1a 0x17
[   93.039464] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[   93.048039] send BC data:
[   93.048039] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[   93.055477] send BC data:
[   93.055477] 0x0000: 0x03 0x02 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[   93.062985] send BC data:
[   93.062985] 0x0000: 0x03 0x05 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[   93.070486] bitmain_asic_close
[   98.046574] bitmain-asic: success to unregister device
[   99.077087] compile Apr 20 2016--17:35:14
[   99.081401] CM_PER_SPI1_CLKCTRL 0x2
[   99.085076] spi_vaddr 0xfa1a0000
[   99.088460] version 0x40300a0b
[   99.091655] OMAP2_MCSPI_SYSSTATUS 0x1
[   99.095487] OMAP2_MCSPI_MODULCTRL 0x1
[   99.099324] OMAP2_MCSPI_CHCONF0 0x180103c5
[   99.103670] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[   99.110939] hash ok
[   99.113167] hashtest OK
[   99.115960] bitmain-asic: success to register device
[   99.191420] Detect hardware version = 4
[   99.195491] fix hardware version
[   99.198876] hardware_version = 0x4
[   99.202729] S5 ctrl board test V1.1
[   99.206630] bitmain_asic_open ok
[   99.220774] Detect device
[   99.223571] soft ctrl rst time
[   99.226868] reset hash asic
[   99.229807] clear FPGA nonce buffer
[  100.232007] soft ctrl rst time
[  100.237903] reset hash asic
[  100.240866] clear FPGA nonce buffer
[  101.347187] get chain0 reg0x0
[  101.350330] send BC data:
[  101.350330] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[  101.456605] asic cmd return 00988513
--- cut here ---
[  101.621755] asic cmd return 00988513
[  101.625560] chain0 total asic:45
[  101.628943] pos0--addr:00
--- cut here ---
[  101.752890] pos44--addr:00
[  101.755728] chain0_asic_exist{0xffffffff}
[  101.759933] get chain2 reg0x0
[  101.763038] send BC data:
[  101.763038] 0x0000: 0x03 0x02 0x00 0x1a 0x84 0x00 0x00 0x11
[  101.876559] asic cmd return 00988513
--- cut here ---
[  102.043350] asic cmd return 00988513
[  102.047165] chain2 total asic:45
[  102.050551] pos0--addr:00
--- cut here ---
[  102.174462] pos44--addr:00
[  102.177299] chain2_asic_exist{0xffffffff}
[  102.181489] get chain5 reg0x0
[  102.184595] send BC data:
[  102.184595] 0x0000: 0x03 0x05 0x00 0x1a 0x84 0x00 0x00 0x11
[  102.292558] asic cmd return 00988513
--- cut here
[  102.457715] asic cmd return 00988513
[  102.461529] chain5 total asic:45
[  102.464914] pos0--addr:00
--- cut here ---
[  102.588682] pos44--addr:00
[  102.591517] chain5_asic_exist{0xffffffff}
[  102.595730] total chain_num{3}
[  102.598930] chain0 chain_map 0
[  102.602125] chain0 asic_num--64 actual--45
[  102.606411] chain0 sw addr interval 5
[  102.610278] chain1 chain_map 2
[  102.613476] chain1 asic_num--64 actual--45
[  102.617753] chain1 sw addr interval 5
[  102.621582] chain2 chain_map 5
[  102.624775] chain2 asic_num--64 actual--45
[  102.629058] chain2 sw addr interval 5
[  102.632888] clear FPGA nonce buffer
[  102.942065] btm_tx_conf
[  102.944677] fan pwm valid {100}
[  102.947964] Set asic frequency {700}
[  102.951706] Set chip_addr{0x0}reg_address{0x4}value{0x8207}
[  102.957540] pll reg_data 0x8207
[  102.960833] close pic cmd_buf[0]: 0x66, cmd_buf[1]: 0x99, cmd_buf[2]: 0x77, cmd_buf[3]: 0xc5
[  102.969651] send BC data:
[  102.969651] 0x0000: 0x03 0x00 0x00 0x1a 0x66 0x99 0x77 0xc5
[  102.983875] send BC data:
[  102.983875] 0x0000: 0x03 0x02 0x00 0x1a 0x66 0x99 0x77 0xc5
[  103.001452] send BC data:
[  103.001452] 0x0000: 0x03 0x05 0x00 0x1a 0x66 0x99 0x77 0xc5
[  103.112779] send BC data:
[  103.112779] 0x0000: 0x03 0x00 0x00 0x1a 0x66 0x99 0x77 0xc5
[  103.126453] send BC data:
[  103.126453] 0x0000: 0x03 0x02 0x00 0x1a 0x66 0x99 0x77 0xc5
[  103.144028] send BC data:
[  103.144028] 0x0000: 0x03 0x05 0x00 0x1a 0x66 0x99 0x77 0xc5
[  103.255357] send BC data:
[  103.255357] 0x0000: 0x03 0x00 0x00 0x1a 0x66 0x99 0x77 0xc5
[  103.269029] send BC data:
[  103.269029] 0x0000: 0x03 0x02 0x00 0x1a 0x66 0x99 0x77 0xc5
[  103.286608] send BC data:
[  103.286608] 0x0000: 0x03 0x05 0x00 0x1a 0x66 0x99 0x77 0xc5
[  103.397939] timeout {0x1a5a}
[  103.400958] rev timeout {0x5a1a0080}
[  103.404863] set freq = 700
[  103.407717] Freq 700, PLL1 00070040, PLL2 0220
[  103.412371] PLL1 0x70040, PLL2 0x220
[  103.416118] plldivider1 cmd_buf[0]{0x7}cmd_buf[1]{0x7}cmd_buf[2]{0x0}cmd_buf[3]{0x56}
[  103.424301] send BC data:
[  103.424301] 0x0000: 0x03 0x00 0x00 0x1a 0x07 0x07 0x00 0x56
[  103.433091] plldivider2 cmd_buf[0]{0x82}cmd_buf[1]{0x0}cmd_buf[2]{0x2}cmd_buf[3]{0x20}
[  103.441375] send BC data:
[  103.441375] 0x0000: 0x03 0x00 0x00 0x1a 0x82 0x00 0x02 0x20
[  103.450700] chain0 inactive
[  103.453641] send BC data:
[  103.453641] 0x0000: 0x03 0x00 0x00 0x1a 0x85 0x00 0x00 0x0f
[  103.464339] send BC data:
--- cut here ---
[  105.079580] send BC data:
[  105.079580] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xf5 0x00 0x0f
[  105.095202] send BC data:
[  105.095202] 0x0000: 0x03 0x02 0x00 0x1a 0x01 0xfa 0x00 0x02
[  105.110831] plldivider1 cmd_buf[0]{0x7}cmd_buf[1]{0x7}cmd_buf[2]{0x0}cmd_buf[3]{0x56}
[  105.119009] send BC data:
[  105.119009] 0x0000: 0x03 0x05 0x00 0x1a 0x07 0x07 0x00 0x56
[  105.126449] plldivider2 cmd_buf[0]{0x82}cmd_buf[1]{0x0}cmd_buf[2]{0x2}cmd_buf[3]{0x20}
[  105.134720] send BC data:
[  105.134720] 0x0000: 0x03 0x05 0x00 0x1a 0x82 0x00 0x02 0x20
[  105.144027] chain5 inactive
[  105.146950] send BC data:
[  105.146950] 0x0000: 0x03 0x05 0x00 0x1a 0x85 0x00 0x00 0x0f
[  105.157702] send BC data:
[  105.157702] 0x0000: 0x03 0x05 0x00 0x1a 0x01 0x00 0x00 0x19
--- cut here ----
[  106.030760] 0x0000: 0x03 0x00 0x00 0x1a 0x86 0x10 0x03 0x13
[  106.038555] send BC data:
[  106.038555] 0x0000: 0x03 0x02 0x00 0x1a 0x86 0x10 0x03 0x13
[  106.046367] send BC data:
[  106.046367] 0x0000: 0x03 0x05 0x00 0x1a 0x86 0x10 0x03 0x13
[  106.054179] send BC data:
[  106.054179] 0x0000: 0x03 0x20 0x00 0x03 0x86 0x10 0x03 0x04
[  106.061560] bauddiv 3
[  106.063852] gateblk2 83
[  106.066600] timeout {0x1cac6}
[  106.069710] rev timeout {0xc6ca0180}
[  106.073520] open core
[  106.075904] send BC data:
[  106.075904] 0x0000: 0x03 0x00 0x00 0x03 0x86 0x00 0x83 0x00
[  106.091304] send BC data:
[  106.091304] 0x0000: 0x03 0x02 0x00 0x03 0x86 0x00 0x83 0x00
[  106.106919] send BC data:
[  106.106919] 0x0000: 0x03 0x05 0x00 0x03 0x86 0x00 0x83 0x00
[  106.122549] Sending open core work
[  106.126109] Send new block cmd
[  106.138765] Timeout {1}
[  106.141330] Snd Time Interval {21}ms
[  106.145076] Set bitmain configure
[  106.148548] clear FPGA nonce buffer
[  106.152290] drv fifo empty
[  106.171476]
[  106.171476]  error_fan 5, normal_fan 1, fan_num 1
[  107.166785] get chain0 reg0x0
[  107.169942] send BC data:
[  107.169942] 0x0000: 0x03 0x00 0x00 0x03 0x84 0x00 0x00 0x11
[  107.178662] Change diff to 8
[  107.181727] diff fix to 6
[  107.184478] Change net_diff to 38
[  107.189043] asic cmd return 00988513
[  107.192799] Chain0 PLL: {0x13859800}
[  107.196552] asic cmd return 05988513
[  107.200297] Chain0 PLL: {0x13859805}
[  107.204046] asic cmd return 0a988513
[  107.207786] Chain0 PLL: {0x1385980a}
[  107.211536] asic cmd return 0f988513
[  107.215279] Chain0 PLL: {0x1385980f}
----- cut here ----
[  107.606079] asic cmd return d7988513
[  107.609819] Chain0 PLL: {0x138598d7}
[  107.613669] asic cmd return dc988513
[  107.617411] Chain0 PLL: {0x138598dc}
[  108.194971] timeout {0x542}
[  108.197916] rev timeout {0x42050080}
[  108.612967] Send new block cmd
[  111.894166] ch5-as19: dev->task_buffer_wr{0x00002937}rd{0x00001ec2}ret work_id{0x9dd9} don't match task_buffer_match{0x1dd9}
[  114.741830] Send new block cmd
[  114.754098] Change diff to 10
[  114.757231] diff fix to 6
[  115.112908] ch0-as34: dev->task_buffer_wr{0x00003c7f}rd{0x00003ac0}ret work_id{0xb9eb} don't match task_buffer_match{0x39eb}
[  116.187233]
[  116.187233]  error_fan 5, normal_fan 1, fan_num 1
[  117.925421] ch0-as1: dev->task_buffer_wr{0x0000105f}rd{0x00000e40}ret work_id{0x8d5b} don't match task_buffer_match{0x0d5b}
[  126.206701]
[  126.206701]  error_fan 5, normal_fan 1, fan_num 1
[  136.226228]
[  136.226228]  error_fan 5, normal_fan 1, fan_num 1
[  144.774385] Change diff to 12
[  144.777578] diff fix to 6
[  144.780896] Send new block cmd
[  146.245840]
[  146.245840]  error_fan 5, normal_fan 1, fan_num 1
[  146.343492] ch0-as10: dev->task_buffer_wr{0x00003716}rd{0x0000334a}ret work_id{0xb25d} don't match task_buffer_match{0x325d}
[  156.265220]
[  156.265220]  error_fan 5, normal_fan 1, fan_num 1
[  166.284756]
[  166.284756]  error_fan 5, normal_fan 1, fan_num 1
[  166.291339] stop send work to all chain
[  166.295353] Send new block cmd
[  176.304270]
[  176.304270]  error_fan 5, normal_fan 1, fan_num 1
[  186.323799]
[  186.323799]  error_fan 5, normal_fan 1, fan_num 1
root@antMiner:~#

Is it because of fan not response with it's speed? Or something else? How can i figure failure rootcause?
Jump to: