S9 hardware errors + discarded ??? | Bitcointalksearch.org

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: mousehouse on July 31, 2017, 05:52:19 AM

hi all!

I received my S9 13.5T and have it up and running for a day now, however I'm puzzled by two things in the GUI.

See screenshot...

I see HW errors on all three boards, with one board having way more errors than the others. Also, I see most of my work being discarded by the pool. Anybody else see this as well?

I'd like to tune down the frequency a bit, but my miner seems to have the autotune firmware. Ideas?

Thx!

fixed image.

the hw errors are not much the % is tiny 0.0003% which means if you earn a btc by mining you would get 0.9997 btc

if the hw read 0.0100 or more I would worry

discards are nothing this is not any thing at all.

what does the miner show on kano 12.5th? 13.0 th? as this is what you get paid by not the gui numbers

the fan is wrong try a software reboot it may go away

fanatic26

hero member

Activity: 756

Merit: 560

Quote from: MinerSRQ on August 01, 2017, 06:04:27 AM

Please tell me that's not really 30k fan speed!?

I have had S9s report crazy fan speeds since I started with them. It is for sure not spinning at anything over 6000rpm as that is the limit of the motor.

swedenrt

member

Activity: 79

Merit: 10

feeldiam

What is the status of this finally? any new model in the market?

MinerSRQ

member

Activity: 113

Merit: 10

Quote from: mousehouse on July 31, 2017, 05:52:19 AM

hi all!

I received my S9 13.5T and have it up and running for a day now, however I'm puzzled by two things in the GUI.

See screenshot...

I see HW errors on all three boards, with one board having way more errors than the others. Also, I see most of my work being discarded by the pool. Anybody else see this as well?

I'd like to tune down the frequency a bit, but my miner seems to have the autotune firmware. Ideas?

Thx!

Please tell me that's not really 30k fan speed!?

fanatic26

hero member

Activity: 756

Merit: 560

I know it may look strange but those are actually both normal things to see. Some boards just have more hw errors than others in my experience, but overall its pretty meaningless. As far as the auto tune firmware goes you are just stuck with it. Some people have claimed that doing an IP reporter reset brings them back to older firmware but I have not been able to duplicate it myself.

mousehouse

full member

Activity: 150

Merit: 100

hi all!

I received my S9 13.5T and have it up and running for a day now, however I'm puzzled by two things in the GUI.

See screenshot...

I see HW errors on all three boards, with one board having way more errors than the others. Also, I see most of my work being discarded by the pool. Anybody else see this as well?

I'd like to tune down the frequency a bit, but my miner seems to have the autotune firmware. Ideas?

Thx!

Topic: S9 hardware errors + discarded ??? (Read 653 times)