Topic: S9 hashboard problem (Read 79 times)
Thanks for your help im gone try this. Regards
The hashboard is showing 63 asics which is a good sign, this could be a frequency/voltage issue, I believe if you run it on custom firmware like Vnish and let it auto-tune a low profile like the 12.5th that board might just come back to life.
Please don't try to disable the temp-sensor by any means, it's a very risky thing to do.
Please don't try to disable the temp-sensor by any means, it's a very risky thing to do.
It seems there is abnormal status in chain #8 according to your image that causes hashrate drop.
Look at this last log
It looks like a temp sensor issue.
Can you try to reattach the ribbon cable and power supply and test it again? (Sometimes if the cable is not well-attached it may cause overheating/abnormal status)
Or test the hashboard one by one
If it doesn't work I think your last hope is to switch to braiins OS just to bypass the temp sensor.
Look at this last log
Code:
Chain[5] Chip[244] pcb temperature=54
Chain[5] Chip[62] junction temperature=123
Special fix Chain[5] Chip[62] middle Temp = 69
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=50
Chain[6] Chip[62] junction temperature=59
Special fix Chain[6] Chip[62] middle Temp = 65
Done read temp on Chain[6]
read failed on Chain[7] Chip[62] middle Temp old value:15
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Max pcb temp : 54
Read temp failed, set fixed full fan speed
Chain[5] Chip[62] junction temperature=123
Special fix Chain[5] Chip[62] middle Temp = 69
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=50
Chain[6] Chip[62] junction temperature=59
Special fix Chain[6] Chip[62] middle Temp = 65
Done read temp on Chain[6]
read failed on Chain[7] Chip[62] middle Temp old value:15
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Max pcb temp : 54
Read temp failed, set fixed full fan speed
It looks like a temp sensor issue.
Can you try to reattach the ribbon cable and power supply and test it again? (Sometimes if the cable is not well-attached it may cause overheating/abnormal status)
Or test the hashboard one by one
If it doesn't work I think your last hope is to switch to braiins OS just to bypass the temp sensor.
Hello, I share the problem that is happening with my S9, if someone can help me, I will thank you, since I am a rookie with this.
After a shutdown from the power supply cable, one of the 3 boards has stopped working properly. After this event I tried to restart the machine 3 more times to see if it returned to normal, but this board did not work again. The last thing I did is remove this board and leave the other two working normally. I would like to know if it has happened to any of you and if it is a hardware problem or can be solved in another way. Any information I will be grateful to you.
https://ibb.co/3shqwGL
After a shutdown from the power supply cable, one of the 3 boards has stopped working properly. After this event I tried to restart the machine 3 more times to see if it returned to normal, but this board did not work again. The last thing I did is remove this board and leave the other two working normally. I would like to know if it has happened to any of you and if it is a hardware problem or can be solved in another way. Any information I will be grateful to you.
https://ibb.co/3shqwGL
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000013] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000297] ps7-ttc #0 at df804000, irq=43
[ 0.000601] Console: colour dummy device 80x30
[ 0.000631] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040198] pid_max: default: 32768 minimum: 301
[ 0.040409] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040428] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042610] CPU: Testing write buffer coherency: ok
[ 0.042926] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042983] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043201] L310 cache controller enabled
[ 0.043220] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120985] CPU1: Booted secondary processor
[ 0.210219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210351] Brought up 2 CPUs
[ 0.210369] SMP: Total of 2 processors activated.
[ 0.210377] CPU: All CPU(s) started in SVC mode.
[ 0.211036] devtmpfs: initialized
[ 0.213424] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214618] regulator-dummy: no parameters
[ 0.222031] NET: Registered protocol family 16
[ 0.224215] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226480] cpuidle: using governor ladder
[ 0.226494] cpuidle: using governor menu
[ 0.233817] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235315] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235328] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235441] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257162] bio: create slab at 0
[ 0.258554] vgaarb: loaded
[ 0.259259] SCSI subsystem initialized
[ 0.260140] usbcore: registered new interface driver usbfs
[ 0.260447] usbcore: registered new interface driver hub
[ 0.260675] usbcore: registered new device driver usb
[ 0.261224] media: Linux media interface: v0.10
[ 0.261382] Linux video capture interface: v2.00
[ 0.261620] pps_core: LinuxPPS API ver. 1 registered
[ 0.261631] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.261753] PTP clock support registered
[ 0.262107] EDAC MC: Ver: 3.0.0
[ 0.263155] Advanced Linux Sound Architecture Driver Initialized.
[ 0.265896] DMA-API: preallocated 4096 debug entries
[ 0.265909] DMA-API: debugging enabled by kernel config
[ 0.265982] Switched to clocksource arm_global_timer
[ 0.287024] NET: Registered protocol family 2
[ 0.287665] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287722] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287808] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287856] TCP: reno registered
[ 0.287873] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287904] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288148] NET: Registered protocol family 1
[ 0.288480] RPC: Registered named UNIX socket transport module.
[ 0.288492] RPC: Registered udp transport module.
[ 0.288500] RPC: Registered tcp transport module.
[ 0.288508] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288521] PCI: CLS 0 bytes, default 64
[ 0.288944] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290928] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292973] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293172] msgmni has been set to 967
[ 0.293943] io scheduler noop registered
[ 0.293955] io scheduler deadline registered
[ 0.293995] io scheduler cfq registered (default)
[ 0.305594] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.305614] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.428429] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.996187] console [ttyPS0] enabled
[ 1.000440] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.008054] [drm] Initialized drm 1.1.0 20060810
[ 1.025023] brd: module loaded
[ 1.034369] loop: module loaded
[ 1.043747] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.049730] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.057564] libphy: XEMACPS mii bus: probed
[ 1.061931] ------------- phy_id = 0x3625e62
[ 1.066799] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.075359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.082009] ehci-pci: EHCI PCI platform driver
[ 1.089272] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.096144] usbcore: registered new interface driver usb-storage
[ 1.102980] mousedev: PS/2 mouse device common for all mice
[ 1.109080] i2c /dev entries driver
[ 1.115920] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.121442] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.127358] Xilinx Zynq CpuIdle Driver started
[ 1.132188] sdhci: Secure Digital Host Controller Interface driver
[ 1.138391] sdhci: Copyright(c) Pierre Ossman
[ 1.142663] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.149487] mmc0: no vqmmc regulator found
[ 1.153499] mmc0: no vmmc regulator found
[ 1.196014] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.206711] usbcore: registered new interface driver usbhid
[ 1.212198] usbhid: USB HID core driver
[ 1.216947] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.223214] nand: Micron MT29F2G08ABAEAWP
[ 1.227264] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.233134] Bad block table found at page 131008, version 0x01
[ 1.239368] Bad block table found at page 130944, version 0x01
[ 1.245421] 3 ofpart partitions found on MTD device pl353-nand
[ 1.251183] Creating 3 MTD partitions on "pl353-nand":
[ 1.256317] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.264338] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.271717] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.280627] TCP: cubic registered
[ 1.283864] NET: Registered protocol family 17
[ 1.288588] Registering SWP/SWPB emulation handler
[ 1.294441] regulator-dummy: disabling
[ 1.298758] UBI: attaching mtd1 to ubi0
[ 1.825302] UBI: scanning is finished
[ 1.836911] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.843966] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.850762] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.857439] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.864276] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.870287] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.877397] UBI: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 1111531575
[ 1.886427] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.895625] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.895630] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.899569] ALSA device list:
[ 1.899573] No soundcards found.
[ 1.915951] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.944899] UBIFS: recovery needed
[ 2.080587] UBIFS: recovery completed
[ 2.084251] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.090199] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.099305] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.109194] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.114223] UBIFS: media format: w4/r0 (latest is w4/r0), UUID DF3D9FA6-7EB8-4015-899C-12F54E31C60D, small LPT model
[ 2.125292] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.132025] devtmpfs: mounted
[ 2.135134] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.975609] random: dd urandom read with 0 bits of entropy available
[ 3.396009]
[ 3.396009] bcm54xx_config_init
[ 4.466020]
[ 4.466020] bcm54xx_config_init
[ 7.466873] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.472958] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 21.864073] In axi fpga driver!
[ 21.867161] request_mem_region OK!
[ 21.870531] AXI fpga dev virtual address is 0xdf9fc000
[ 21.875659] *base_vir_addr = 0xc51e
[ 21.890132] In fpga mem driver!
[ 21.893530] request_mem_region OK!
[ 21.897144] fpga mem virtual address is 0xe2000000
[ 22.705344]
[ 22.705344] bcm54xx_config_init
[ 23.795253]
[ 23.795253] bcm54xx_config_init
[ 26.795759] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 26.801776] xemacps e000b000.ps7-ethernet: link up (100/FULL)
log_level = 4
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6f37000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d30000
forceFreq=-1 forceFlag=0
min work minertest[0]:912
DETECT HW version=0000c51e
miner ID : 816c644a5c208814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[0] has core num=1
Chain[5] ASIC[1] has core num=1
Chain[5] ASIC[3] has core num=1
Chain[5] ASIC[4] has core num=1
Chain[5] ASIC[7] has core num=1
Chain[5] ASIC[9] has core num=1
Chain[5] ASIC[10] has core num=1
Chain[5] ASIC[12] has core num=1
Chain[5] ASIC[13] has core num=11
Chain[5] ASIC[15] has core num=1
Chain[5] ASIC[16] has core num=1
Chain[5] ASIC[18] has core num=1
Chain[5] ASIC[19] has core num=1
Chain[5] ASIC[21] has core num=1
Chain[5] ASIC[22] has core num=1
Chain[5] ASIC[24] has core num=1
Chain[5] ASIC[25] has core num=1
Chain[5] ASIC[32] has core num=1
Chain[5] ASIC[33] has core num=1
Chain[5] ASIC[35] has core num=1
Chain[5] ASIC[36] has core num=1
Chain[5] ASIC[37] has core num=2
Chain[5] ASIC[38] has core num=3
Chain[5] ASIC[39] has core num=2
Chain[5] ASIC[40] has core num=1
Chain[5] ASIC[41] has core num=1
Chain[5] ASIC[42] has core num=1
Chain[5] ASIC[43] has core num=1
Chain[5] ASIC[44] has core num=1
Chain[5] ASIC[45] has core num=1
Chain[5] ASIC[46] has core num=2
Chain[5] ASIC[47] has core num=1
Chain[5] ASIC[48] has core num=1
Chain[5] ASIC[49] has core num=2
Chain[5] ASIC[51] has core num=4
Chain[5] ASIC[52] has core num=1
Chain[5] ASIC[53] has core num=1
Chain[5] ASIC[54] has core num=1
Chain[5] ASIC[55] has core num=1
Chain[5] ASIC[56] has core num=1
Chain[5] ASIC[57] has core num=1
Chain[5] ASIC[58] has core num=1
Chain[5] ASIC[59] has core num=1
Chain[5] ASIC[60] has core num=1
Chain[5] ASIC[61] has core num=1
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[13] has core num=1
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[1] has core num=1
Chain[7] ASIC[4] has core num=1
Chain[7] ASIC[6] has core num=2
Chain[7] ASIC[7] has core num=1
Chain[7] ASIC[9] has core num=2
Chain[7] ASIC[10] has core num=1
Chain[7] ASIC[12] has core num=1
Chain[7] ASIC[13] has core num=2
Chain[7] ASIC[15] has core num=1
Chain[7] ASIC[16] has core num=1
Chain[7] ASIC[18] has core num=1
Chain[7] ASIC[19] has core num=1
Chain[7] ASIC[20] has core num=1
Chain[7] ASIC[21] has core num=1
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[23] has core num=3
Chain[7] ASIC[24] has core num=3
Chain[7] ASIC[29] has core num=2
Chain[7] ASIC[32] has core num=15
Chain[7] ASIC[36] has core num=1
Chain[7] ASIC[37] has core num=1
Chain[7] ASIC[38] has core num=15
Chain[7] ASIC[39] has core num=1
Chain[7] ASIC[40] has core num=1
Chain[7] ASIC[42] has core num=1
Chain[7] ASIC[43] has core num=1
Chain[7] ASIC[45] has core num=1
Chain[7] ASIC[46] has core num=1
Chain[7] ASIC[47] has core num=9
Chain[7] ASIC[48] has core num=1
Chain[7] ASIC[49] has core num=1
Chain[7] ASIC[51] has core num=1
Chain[7] ASIC[52] has core num=1
Chain[7] ASIC[54] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=57 on chain[5], value=910
get PIC voltage=57 on chain[6], value=910
get PIC voltage=57 on chain[7], value=910
chain[5] temp offset record: 62,-65,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-3,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-86,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
total_exist_chain_num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 2071 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Jul 1 11:54:32 CST 2019 type: Antminer S9i
miner ID : 816c644a5c208814
Checking fans...
get fan[4] speed=4440
get fan[5] speed=5760
get fan[4] speed=4440
get fan[5] speed=5760
get fan[4] speed=4440
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0b 0x48 0x0f 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x01 0x48 0x01 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0f 0x4a 0x0d 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0a 0x4f 0x0a 0x4f 0x04 0x4f 0x0f 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0f 0x4f 0x0f 0x4f 0x0f 0x4f 0x0f 0x4f 0x05 0x4f 0x07 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=57 value=910
Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=910
Chain[J6] will use backup chain_voltage_pic=890 [91]
Chain[J6] get working chain_voltage_pic=91
Chain[J7] orignal chain_voltage_pic=57 value=910
Chain[J7] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=910
Chain[J7] will use backup chain_voltage_pic=870 [125]
Chain[J7] get working chain_voltage_pic=125
Chain[J8] orignal chain_voltage_pic=57 value=910
Chain[J8] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=910
Chain[J8] will use backup chain_voltage_pic=870 [125]
Chain[J8] get working chain_voltage_pic=125
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 54 asic
retry Chain[J8] has 62 asic
retry Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[0] has core num=1
Chain[J6] ASIC[1] has core num=1
Chain[J6] ASIC[3] has core num=1
Chain[J6] ASIC[4] has core num=1
Chain[J6] ASIC[7] has core num=1
Chain[J6] ASIC[9] has core num=1
Chain[J6] ASIC[10] has core num=1
Chain[J6] ASIC[12] has core num=1
Chain[J6] ASIC[13] has core num=11
Chain[J6] ASIC[15] has core num=1
Chain[J6] ASIC[16] has core num=1
Chain[J6] ASIC[18] has core num=1
Chain[J6] ASIC[19] has core num=1
Chain[J6] ASIC[21] has core num=1
Chain[J6] ASIC[22] has core num=1
Chain[J6] ASIC[24] has core num=1
Chain[J6] ASIC[25] has core num=1
Chain[J6] ASIC[32] has core num=1
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[35] has core num=1
Chain[J6] ASIC[36] has core num=1
Chain[J6] ASIC[37] has core num=2
Chain[J6] ASIC[38] has core num=3
Chain[J6] ASIC[39] has core num=2
Chain[J6] ASIC[40] has core num=1
Chain[J6] ASIC[41] has core num=1
Chain[J6] ASIC[42] has core num=1
Chain[J6] ASIC[43] has core num=1
Chain[J6] ASIC[44] has core num=1
Chain[J6] ASIC[45] has core num=1
Chain[J6] ASIC[46] has core num=2
Chain[J6] ASIC[47] has core num=1
Chain[J6] ASIC[48] has core num=1
Chain[J6] ASIC[49] has core num=2
Chain[J6] ASIC[51] has core num=4
Chain[J6] ASIC[52] has core num=1
Chain[J6] ASIC[53] has core num=1
Chain[J6] ASIC[54] has core num=1
Chain[J6] ASIC[55] has core num=1
Chain[J6] ASIC[56] has core num=1
Chain[J6] ASIC[57] has core num=1
Chain[J6] ASIC[58] has core num=1
Chain[J6] ASIC[59] has core num=1
Chain[J6] ASIC[60] has core num=1
Chain[J6] ASIC[61] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[13] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[1] has core num=1
Chain[J8] ASIC[4] has core num=1
Chain[J8] ASIC[6] has core num=2
Chain[J8] ASIC[7] has core num=1
Chain[J8] ASIC[9] has core num=2
Chain[J8] ASIC[10] has core num=1
Chain[J8] ASIC[12] has core num=1
Chain[J8] ASIC[13] has core num=2
Chain[J8] ASIC[15] has core num=1
Chain[J8] ASIC[16] has core num=1
Chain[J8] ASIC[18] has core num=1
Chain[J8] ASIC[19] has core num=1
Chain[J8] ASIC[20] has core num=1
Chain[J8] ASIC[21] has core num=1
Chain[J8] ASIC[22] has core num=1
Chain[J8] ASIC[23] has core num=3
Chain[J8] ASIC[24] has core num=3
Chain[J8] ASIC[29] has core num=2
Chain[J8] ASIC[32] has core num=15
Chain[J8] ASIC[36] has core num=1
Chain[J8] ASIC[37] has core num=1
Chain[J8] ASIC[38] has core num=15
Chain[J8] ASIC[39] has core num=1
Chain[J8] ASIC[40] has core num=1
Chain[J8] ASIC[42] has core num=1
Chain[J8] ASIC[43] has core num=1
Chain[J8] ASIC[45] has core num=1
Chain[J8] ASIC[46] has core num=1
Chain[J8] ASIC[47] has core num=9
Chain[J8] ASIC[48] has core num=1
Chain[J8] ASIC[49] has core num=1
Chain[J8] ASIC[51] has core num=1
Chain[J8] ASIC[52] has core num=1
Chain[J8] ASIC[54] has core num=2
miner total rate=13904GH/s ideal_total_hash_rate = 13500GH/s
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-65
Chain:5 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:5 max freq=637
Chain:5 min freq=637
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-3
Chain:6 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650
read PIC voltage=910 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-86
Chain:7 base freq=681
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:7 max freq=681
Chain:7 min freq=681
Miner fix freq ...
totalRate = 13904, fixed_totalRate = 13635
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-65
Chain:5 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:5 max freq=637
Chain:5 min freq=637
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-3
Chain:6 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650
read PIC voltage=910 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-86
Chain:7 base freq=681
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:7 max freq=681
Chain:7 min freq=681
max freq = 681
totalRate = 13904, fixed_totalRate = 13500
set baud=1
Chain[J6] PIC temp offset: 62,-65,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
Chain[J6] chip[244] use PIC middle temp offset=-65 typeID=1a
Warning: Chain[5] chip[244] local:27 remote:90 offset:-32, will fixed offset=27
New offset Chain[6] chip[244] local:27 remote:90 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset: 62,-3,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-3 typeID=55
New offset Chain[7] chip[244] local:27 remote:29 offset:28
Chain[J7] chip[244] get middle temp offset=28 typeID=55
Chain[J8] PIC temp offset: 62,-86,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-86 typeID=00
Warning: Chain[J8] has no temp offset in PIC! will fix it
Chain[J8] use default temp chip[244]
Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9C)
New offset Chain[8] chip[244] local:-64 remote:-64 offset:21
Chain[J8] chip[244] get middle temp offset=21 typeID=00
single board rate=4534 voltage limit=940 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 940
single board rate=4667 voltage limit=940 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 940
single board rate=4702 voltage limit=940 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 940
setting to working voltage...
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[6] set voltage to 870
chain[7] set voltage to 870
start thread for read temp
setStartTimePoint total_tv_start_sys=193 total_tv_end_sys=194
restartNum = 2 , auto-reinit enabled...
mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9i/196500"]}
mining.subscribe:{"id": 1, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9i/196500"]}
mining.subscribe:{"id": 2, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9i/196500"]}
bring_up_pcb_temp = 43
avg hash rate = 9483.285225, ideal hash rate = 13500
hash rate is low...
do read_temp_func once...
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=77.5270 Asic[02]=74.3230 Asic[03]=67.1590 Asic[04]=71.1680 Asic[05]=72.5950 Asic[06]=69.0880 Asic[07]=74.2390 Asic[08]=70.0610
Asic[09]=71.0850 Asic[10]=73.9030 Asic[11]=75.6980 Asic[12]=74.5410 Asic[13]=72.5780 Asic[14]=73.2150 Asic[15]=68.8030 Asic[16]=73.4670
Asic[17]=67.8970 Asic[18]=77.0740 Asic[19]=70.2960 Asic[20]=71.8230 Asic[21]=76.7550 Asic[22]=75.9330 Asic[23]=78.1650 Asic[24]=71.7890
Asic[25]=70.7320 Asic[26]=68.5010 Asic[27]=76.1510 Asic[28]=71.0680 Asic[29]=72.2090 Asic[30]=74.2550 Asic[31]=75.7990 Asic[32]=68.5180
Asic[33]=72.4440 Asic[34]=70.4810 Asic[35]=74.4900 Asic[36]=67.1080 Asic[37]=70.7660 Asic[38]=69.8930 Asic[39]=67.3940 Asic[40]=68.5010
Asic[41]=74.8930 Asic[42]=74.8590 Asic[43]=73.7690 Asic[44]=72.3760 Asic[45]=71.2860 Asic[46]=67.9140 Asic[47]=68.8870 Asic[48]=70.7320
Asic[49]=74.7760 Asic[50]=73.9700 Asic[51]=71.3700 Asic[52]=71.2860 Asic[53]=70.9340 Asic[54]=66.4040 Asic[55]=74.5070 Asic[56]=73.8360
Asic[57]=68.8870 Asic[58]=74.0370 Asic[59]=79.1040 Asic[60]=69.4570 Asic[61]=73.4170 Asic[62]=72.5950 Asic[63]=77.7620
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=77.9300 Asic[02]=73.8860 Asic[03]=73.4170 Asic[04]=74.1380 Asic[05]=74.0210 Asic[06]=76.7220 Asic[07]=79.3730 Asic[08]=75.5310
Asic[09]=80.5300 Asic[10]=73.0470 Asic[11]=72.2250 Asic[12]=76.1680 Asic[13]=77.8120 Asic[14]=75.8830 Asic[15]=76.2690 Asic[16]=73.0810
Asic[17]=71.1520 Asic[18]=70.7830 Asic[19]=69.6590 Asic[20]=74.5910 Asic[21]=70.6150 Asic[22]=77.6610 Asic[23]=76.0340 Asic[24]=80.7990
Asic[25]=74.1210 Asic[26]=75.4630 Asic[27]=75.4300 Asic[28]=70.8830 Asic[29]=69.6250 Asic[30]=77.4100 Asic[31]=72.4940 Asic[32]=75.4970
Asic[33]=72.2250 Asic[34]=74.6410 Asic[35]=78.3990 Asic[36]=72.0070 Asic[37]=75.6140 Asic[38]=70.7320 Asic[39]=74.6920 Asic[40]=69.4910
Asic[41]=74.4570 Asic[42]=73.1820 Asic[43]=77.4770 Asic[44]=71.7720 Asic[45]=72.6780 Asic[46]=73.6350 Asic[47]=74.7590 Asic[48]=68.5180
Asic[49]=79.1540 Asic[50]=76.2350 Asic[51]=70.9340 Asic[52]=73.9870 Asic[53]=74.3730 Asic[54]=73.7860 Asic[55]=78.0140 Asic[56]=82.8290
Asic[57]=74.6080 Asic[58]=78.1980 Asic[59]=70.9670 Asic[60]=70.1280 Asic[61]=75.8330 Asic[62]=74.5410 Asic[63]=72.2760
get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=54
Chain[5] Chip[62] junction temperature=123
Special fix Chain[5] Chip[62] middle Temp = 69
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=50
Chain[6] Chip[62] junction temperature=59
Special fix Chain[6] Chip[62] middle Temp = 65
Done read temp on Chain[6]
read failed on Chain[7] Chip[62] middle Temp old value:15
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Max pcb temp : 54
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=241
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000013] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000297] ps7-ttc #0 at df804000, irq=43
[ 0.000601] Console: colour dummy device 80x30
[ 0.000631] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040198] pid_max: default: 32768 minimum: 301
[ 0.040409] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040428] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042610] CPU: Testing write buffer coherency: ok
[ 0.042926] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042983] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043201] L310 cache controller enabled
[ 0.043220] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120985] CPU1: Booted secondary processor
[ 0.210219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210351] Brought up 2 CPUs
[ 0.210369] SMP: Total of 2 processors activated.
[ 0.210377] CPU: All CPU(s) started in SVC mode.
[ 0.211036] devtmpfs: initialized
[ 0.213424] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214618] regulator-dummy: no parameters
[ 0.222031] NET: Registered protocol family 16
[ 0.224215] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226480] cpuidle: using governor ladder
[ 0.226494] cpuidle: using governor menu
[ 0.233817] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235315] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235328] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235441] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.257162] bio: create slab
[ 0.258554] vgaarb: loaded
[ 0.259259] SCSI subsystem initialized
[ 0.260140] usbcore: registered new interface driver usbfs
[ 0.260447] usbcore: registered new interface driver hub
[ 0.260675] usbcore: registered new device driver usb
[ 0.261224] media: Linux media interface: v0.10
[ 0.261382] Linux video capture interface: v2.00
[ 0.261620] pps_core: LinuxPPS API ver. 1 registered
[ 0.261631] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.261753] PTP clock support registered
[ 0.262107] EDAC MC: Ver: 3.0.0
[ 0.263155] Advanced Linux Sound Architecture Driver Initialized.
[ 0.265896] DMA-API: preallocated 4096 debug entries
[ 0.265909] DMA-API: debugging enabled by kernel config
[ 0.265982] Switched to clocksource arm_global_timer
[ 0.287024] NET: Registered protocol family 2
[ 0.287665] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.287722] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.287808] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.287856] TCP: reno registered
[ 0.287873] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287904] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288148] NET: Registered protocol family 1
[ 0.288480] RPC: Registered named UNIX socket transport module.
[ 0.288492] RPC: Registered udp transport module.
[ 0.288500] RPC: Registered tcp transport module.
[ 0.288508] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288521] PCI: CLS 0 bytes, default 64
[ 0.288944] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290928] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292973] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293172] msgmni has been set to 967
[ 0.293943] io scheduler noop registered
[ 0.293955] io scheduler deadline registered
[ 0.293995] io scheduler cfq registered (default)
[ 0.305594] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.305614] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.428429] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.996187] console [ttyPS0] enabled
[ 1.000440] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.008054] [drm] Initialized drm 1.1.0 20060810
[ 1.025023] brd: module loaded
[ 1.034369] loop: module loaded
[ 1.043747] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.049730] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.057564] libphy: XEMACPS mii bus: probed
[ 1.061931] ------------- phy_id = 0x3625e62
[ 1.066799] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.075359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.082009] ehci-pci: EHCI PCI platform driver
[ 1.089272] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.096144] usbcore: registered new interface driver usb-storage
[ 1.102980] mousedev: PS/2 mouse device common for all mice
[ 1.109080] i2c /dev entries driver
[ 1.115920] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.121442] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.127358] Xilinx Zynq CpuIdle Driver started
[ 1.132188] sdhci: Secure Digital Host Controller Interface driver
[ 1.138391] sdhci: Copyright(c) Pierre Ossman
[ 1.142663] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.149487] mmc0: no vqmmc regulator found
[ 1.153499] mmc0: no vmmc regulator found
[ 1.196014] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.206711] usbcore: registered new interface driver usbhid
[ 1.212198] usbhid: USB HID core driver
[ 1.216947] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.223214] nand: Micron MT29F2G08ABAEAWP
[ 1.227264] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.233134] Bad block table found at page 131008, version 0x01
[ 1.239368] Bad block table found at page 130944, version 0x01
[ 1.245421] 3 ofpart partitions found on MTD device pl353-nand
[ 1.251183] Creating 3 MTD partitions on "pl353-nand":
[ 1.256317] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.264338] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.271717] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.280627] TCP: cubic registered
[ 1.283864] NET: Registered protocol family 17
[ 1.288588] Registering SWP/SWPB emulation handler
[ 1.294441] regulator-dummy: disabling
[ 1.298758] UBI: attaching mtd1 to ubi0
[ 1.825302] UBI: scanning is finished
[ 1.836911] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.843966] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.850762] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.857439] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.864276] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.870287] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.877397] UBI: max/mean erase counter: 7/3, WL threshold: 4096, image sequence number: 1111531575
[ 1.886427] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.895625] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.895630] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.899569] ALSA device list:
[ 1.899573] No soundcards found.
[ 1.915951] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.944899] UBIFS: recovery needed
[ 2.080587] UBIFS: recovery completed
[ 2.084251] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.090199] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.099305] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.109194] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.114223] UBIFS: media format: w4/r0 (latest is w4/r0), UUID DF3D9FA6-7EB8-4015-899C-12F54E31C60D, small LPT model
[ 2.125292] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.132025] devtmpfs: mounted
[ 2.135134] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.975609] random: dd urandom read with 0 bits of entropy available
[ 3.396009]
[ 3.396009] bcm54xx_config_init
[ 4.466020]
[ 4.466020] bcm54xx_config_init
[ 7.466873] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.472958] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 21.864073] In axi fpga driver!
[ 21.867161] request_mem_region OK!
[ 21.870531] AXI fpga dev virtual address is 0xdf9fc000
[ 21.875659] *base_vir_addr = 0xc51e
[ 21.890132] In fpga mem driver!
[ 21.893530] request_mem_region OK!
[ 21.897144] fpga mem virtual address is 0xe2000000
[ 22.705344]
[ 22.705344] bcm54xx_config_init
[ 23.795253]
[ 23.795253] bcm54xx_config_init
[ 26.795759] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 26.801776] xemacps e000b000.ps7-ethernet: link up (100/FULL)
log_level = 4
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6f37000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d30000
forceFreq=-1 forceFlag=0
min work minertest[0]:912
DETECT HW version=0000c51e
miner ID : 816c644a5c208814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[0] has core num=1
Chain[5] ASIC[1] has core num=1
Chain[5] ASIC[3] has core num=1
Chain[5] ASIC[4] has core num=1
Chain[5] ASIC[7] has core num=1
Chain[5] ASIC[9] has core num=1
Chain[5] ASIC[10] has core num=1
Chain[5] ASIC[12] has core num=1
Chain[5] ASIC[13] has core num=11
Chain[5] ASIC[15] has core num=1
Chain[5] ASIC[16] has core num=1
Chain[5] ASIC[18] has core num=1
Chain[5] ASIC[19] has core num=1
Chain[5] ASIC[21] has core num=1
Chain[5] ASIC[22] has core num=1
Chain[5] ASIC[24] has core num=1
Chain[5] ASIC[25] has core num=1
Chain[5] ASIC[32] has core num=1
Chain[5] ASIC[33] has core num=1
Chain[5] ASIC[35] has core num=1
Chain[5] ASIC[36] has core num=1
Chain[5] ASIC[37] has core num=2
Chain[5] ASIC[38] has core num=3
Chain[5] ASIC[39] has core num=2
Chain[5] ASIC[40] has core num=1
Chain[5] ASIC[41] has core num=1
Chain[5] ASIC[42] has core num=1
Chain[5] ASIC[43] has core num=1
Chain[5] ASIC[44] has core num=1
Chain[5] ASIC[45] has core num=1
Chain[5] ASIC[46] has core num=2
Chain[5] ASIC[47] has core num=1
Chain[5] ASIC[48] has core num=1
Chain[5] ASIC[49] has core num=2
Chain[5] ASIC[51] has core num=4
Chain[5] ASIC[52] has core num=1
Chain[5] ASIC[53] has core num=1
Chain[5] ASIC[54] has core num=1
Chain[5] ASIC[55] has core num=1
Chain[5] ASIC[56] has core num=1
Chain[5] ASIC[57] has core num=1
Chain[5] ASIC[58] has core num=1
Chain[5] ASIC[59] has core num=1
Chain[5] ASIC[60] has core num=1
Chain[5] ASIC[61] has core num=1
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[13] has core num=1
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[1] has core num=1
Chain[7] ASIC[4] has core num=1
Chain[7] ASIC[6] has core num=2
Chain[7] ASIC[7] has core num=1
Chain[7] ASIC[9] has core num=2
Chain[7] ASIC[10] has core num=1
Chain[7] ASIC[12] has core num=1
Chain[7] ASIC[13] has core num=2
Chain[7] ASIC[15] has core num=1
Chain[7] ASIC[16] has core num=1
Chain[7] ASIC[18] has core num=1
Chain[7] ASIC[19] has core num=1
Chain[7] ASIC[20] has core num=1
Chain[7] ASIC[21] has core num=1
Chain[7] ASIC[22] has core num=1
Chain[7] ASIC[23] has core num=3
Chain[7] ASIC[24] has core num=3
Chain[7] ASIC[29] has core num=2
Chain[7] ASIC[32] has core num=15
Chain[7] ASIC[36] has core num=1
Chain[7] ASIC[37] has core num=1
Chain[7] ASIC[38] has core num=15
Chain[7] ASIC[39] has core num=1
Chain[7] ASIC[40] has core num=1
Chain[7] ASIC[42] has core num=1
Chain[7] ASIC[43] has core num=1
Chain[7] ASIC[45] has core num=1
Chain[7] ASIC[46] has core num=1
Chain[7] ASIC[47] has core num=9
Chain[7] ASIC[48] has core num=1
Chain[7] ASIC[49] has core num=1
Chain[7] ASIC[51] has core num=1
Chain[7] ASIC[52] has core num=1
Chain[7] ASIC[54] has core num=2
Check chain[7] PIC fw version=0x03
get PIC voltage=57 on chain[5], value=910
get PIC voltage=57 on chain[6], value=910
get PIC voltage=57 on chain[7], value=910
chain[5] temp offset record: 62,-65,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-3,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-86,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
total_exist_chain_num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 2071 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Jul 1 11:54:32 CST 2019 type: Antminer S9i
miner ID : 816c644a5c208814
Checking fans...
get fan[4] speed=4440
get fan[5] speed=5760
get fan[4] speed=4440
get fan[5] speed=5760
get fan[4] speed=4440
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0b 0x48 0x0f 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x01 0x48 0x01 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0f 0x4a 0x0d 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0a 0x4f 0x0a 0x4f 0x04 0x4f 0x0f 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0f 0x4f 0x0f 0x4f 0x0f 0x4f 0x0f 0x4f 0x05 0x4f 0x07 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=57 value=910
Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=910
Chain[J6] will use backup chain_voltage_pic=890 [91]
Chain[J6] get working chain_voltage_pic=91
Chain[J7] orignal chain_voltage_pic=57 value=910
Chain[J7] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=910
Chain[J7] will use backup chain_voltage_pic=870 [125]
Chain[J7] get working chain_voltage_pic=125
Chain[J8] orignal chain_voltage_pic=57 value=910
Chain[J8] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=910
Chain[J8] will use backup chain_voltage_pic=870 [125]
Chain[J8] get working chain_voltage_pic=125
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 54 asic
retry Chain[J8] has 62 asic
retry Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[0] has core num=1
Chain[J6] ASIC[1] has core num=1
Chain[J6] ASIC[3] has core num=1
Chain[J6] ASIC[4] has core num=1
Chain[J6] ASIC[7] has core num=1
Chain[J6] ASIC[9] has core num=1
Chain[J6] ASIC[10] has core num=1
Chain[J6] ASIC[12] has core num=1
Chain[J6] ASIC[13] has core num=11
Chain[J6] ASIC[15] has core num=1
Chain[J6] ASIC[16] has core num=1
Chain[J6] ASIC[18] has core num=1
Chain[J6] ASIC[19] has core num=1
Chain[J6] ASIC[21] has core num=1
Chain[J6] ASIC[22] has core num=1
Chain[J6] ASIC[24] has core num=1
Chain[J6] ASIC[25] has core num=1
Chain[J6] ASIC[32] has core num=1
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[35] has core num=1
Chain[J6] ASIC[36] has core num=1
Chain[J6] ASIC[37] has core num=2
Chain[J6] ASIC[38] has core num=3
Chain[J6] ASIC[39] has core num=2
Chain[J6] ASIC[40] has core num=1
Chain[J6] ASIC[41] has core num=1
Chain[J6] ASIC[42] has core num=1
Chain[J6] ASIC[43] has core num=1
Chain[J6] ASIC[44] has core num=1
Chain[J6] ASIC[45] has core num=1
Chain[J6] ASIC[46] has core num=2
Chain[J6] ASIC[47] has core num=1
Chain[J6] ASIC[48] has core num=1
Chain[J6] ASIC[49] has core num=2
Chain[J6] ASIC[51] has core num=4
Chain[J6] ASIC[52] has core num=1
Chain[J6] ASIC[53] has core num=1
Chain[J6] ASIC[54] has core num=1
Chain[J6] ASIC[55] has core num=1
Chain[J6] ASIC[56] has core num=1
Chain[J6] ASIC[57] has core num=1
Chain[J6] ASIC[58] has core num=1
Chain[J6] ASIC[59] has core num=1
Chain[J6] ASIC[60] has core num=1
Chain[J6] ASIC[61] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[13] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[1] has core num=1
Chain[J8] ASIC[4] has core num=1
Chain[J8] ASIC[6] has core num=2
Chain[J8] ASIC[7] has core num=1
Chain[J8] ASIC[9] has core num=2
Chain[J8] ASIC[10] has core num=1
Chain[J8] ASIC[12] has core num=1
Chain[J8] ASIC[13] has core num=2
Chain[J8] ASIC[15] has core num=1
Chain[J8] ASIC[16] has core num=1
Chain[J8] ASIC[18] has core num=1
Chain[J8] ASIC[19] has core num=1
Chain[J8] ASIC[20] has core num=1
Chain[J8] ASIC[21] has core num=1
Chain[J8] ASIC[22] has core num=1
Chain[J8] ASIC[23] has core num=3
Chain[J8] ASIC[24] has core num=3
Chain[J8] ASIC[29] has core num=2
Chain[J8] ASIC[32] has core num=15
Chain[J8] ASIC[36] has core num=1
Chain[J8] ASIC[37] has core num=1
Chain[J8] ASIC[38] has core num=15
Chain[J8] ASIC[39] has core num=1
Chain[J8] ASIC[40] has core num=1
Chain[J8] ASIC[42] has core num=1
Chain[J8] ASIC[43] has core num=1
Chain[J8] ASIC[45] has core num=1
Chain[J8] ASIC[46] has core num=1
Chain[J8] ASIC[47] has core num=9
Chain[J8] ASIC[48] has core num=1
Chain[J8] ASIC[49] has core num=1
Chain[J8] ASIC[51] has core num=1
Chain[J8] ASIC[52] has core num=1
Chain[J8] ASIC[54] has core num=2
miner total rate=13904GH/s ideal_total_hash_rate = 13500GH/s
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-65
Chain:5 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:5 max freq=637
Chain:5 min freq=637
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-3
Chain:6 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650
read PIC voltage=910 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-86
Chain:7 base freq=681
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:7 max freq=681
Chain:7 min freq=681
Miner fix freq ...
totalRate = 13904, fixed_totalRate = 13635
read PIC voltage=910 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=-65
Chain:5 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
Chain:5 max freq=637
Chain:5 min freq=637
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=-3
Chain:6 base freq=650
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650
read PIC voltage=910 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-86
Chain:7 base freq=681
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:7 max freq=681
Chain:7 min freq=681
max freq = 681
totalRate = 13904, fixed_totalRate = 13500
set baud=1
Chain[J6] PIC temp offset: 62,-65,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
Chain[J6] chip[244] use PIC middle temp offset=-65 typeID=1a
Warning: Chain[5] chip[244] local:27 remote:90 offset:-32, will fixed offset=27
New offset Chain[6] chip[244] local:27 remote:90 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset: 62,-3,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
Chain[J7] chip[244] use PIC middle temp offset=-3 typeID=55
New offset Chain[7] chip[244] local:27 remote:29 offset:28
Chain[J7] chip[244] get middle temp offset=28 typeID=55
Chain[J8] PIC temp offset: 62,-86,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
Chain[J8] chip[244] use PIC middle temp offset=-86 typeID=00
Warning: Chain[J8] has no temp offset in PIC! will fix it
Chain[J8] use default temp chip[244]
Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9C)
New offset Chain[8] chip[244] local:-64 remote:-64 offset:21
Chain[J8] chip[244] get middle temp offset=21 typeID=00
single board rate=4534 voltage limit=940 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 940
single board rate=4667 voltage limit=940 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 940
single board rate=4702 voltage limit=940 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 940
setting to working voltage...
chain[5] set voltage to 900
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[5] set voltage to 890
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[6] set voltage to 870
chain[7] set voltage to 870
start thread for read temp
setStartTimePoint total_tv_start_sys=193 total_tv_end_sys=194
restartNum = 2 , auto-reinit enabled...
mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9i/196500"]}
mining.subscribe:{"id": 1, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9i/196500"]}
mining.subscribe:{"id": 2, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9i/196500"]}
bring_up_pcb_temp = 43
avg hash rate = 9483.285225, ideal hash rate = 13500
hash rate is low...
do read_temp_func once...
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=77.5270 Asic[02]=74.3230 Asic[03]=67.1590 Asic[04]=71.1680 Asic[05]=72.5950 Asic[06]=69.0880 Asic[07]=74.2390 Asic[08]=70.0610
Asic[09]=71.0850 Asic[10]=73.9030 Asic[11]=75.6980 Asic[12]=74.5410 Asic[13]=72.5780 Asic[14]=73.2150 Asic[15]=68.8030 Asic[16]=73.4670
Asic[17]=67.8970 Asic[18]=77.0740 Asic[19]=70.2960 Asic[20]=71.8230 Asic[21]=76.7550 Asic[22]=75.9330 Asic[23]=78.1650 Asic[24]=71.7890
Asic[25]=70.7320 Asic[26]=68.5010 Asic[27]=76.1510 Asic[28]=71.0680 Asic[29]=72.2090 Asic[30]=74.2550 Asic[31]=75.7990 Asic[32]=68.5180
Asic[33]=72.4440 Asic[34]=70.4810 Asic[35]=74.4900 Asic[36]=67.1080 Asic[37]=70.7660 Asic[38]=69.8930 Asic[39]=67.3940 Asic[40]=68.5010
Asic[41]=74.8930 Asic[42]=74.8590 Asic[43]=73.7690 Asic[44]=72.3760 Asic[45]=71.2860 Asic[46]=67.9140 Asic[47]=68.8870 Asic[48]=70.7320
Asic[49]=74.7760 Asic[50]=73.9700 Asic[51]=71.3700 Asic[52]=71.2860 Asic[53]=70.9340 Asic[54]=66.4040 Asic[55]=74.5070 Asic[56]=73.8360
Asic[57]=68.8870 Asic[58]=74.0370 Asic[59]=79.1040 Asic[60]=69.4570 Asic[61]=73.4170 Asic[62]=72.5950 Asic[63]=77.7620
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=77.9300 Asic[02]=73.8860 Asic[03]=73.4170 Asic[04]=74.1380 Asic[05]=74.0210 Asic[06]=76.7220 Asic[07]=79.3730 Asic[08]=75.5310
Asic[09]=80.5300 Asic[10]=73.0470 Asic[11]=72.2250 Asic[12]=76.1680 Asic[13]=77.8120 Asic[14]=75.8830 Asic[15]=76.2690 Asic[16]=73.0810
Asic[17]=71.1520 Asic[18]=70.7830 Asic[19]=69.6590 Asic[20]=74.5910 Asic[21]=70.6150 Asic[22]=77.6610 Asic[23]=76.0340 Asic[24]=80.7990
Asic[25]=74.1210 Asic[26]=75.4630 Asic[27]=75.4300 Asic[28]=70.8830 Asic[29]=69.6250 Asic[30]=77.4100 Asic[31]=72.4940 Asic[32]=75.4970
Asic[33]=72.2250 Asic[34]=74.6410 Asic[35]=78.3990 Asic[36]=72.0070 Asic[37]=75.6140 Asic[38]=70.7320 Asic[39]=74.6920 Asic[40]=69.4910
Asic[41]=74.4570 Asic[42]=73.1820 Asic[43]=77.4770 Asic[44]=71.7720 Asic[45]=72.6780 Asic[46]=73.6350 Asic[47]=74.7590 Asic[48]=68.5180
Asic[49]=79.1540 Asic[50]=76.2350 Asic[51]=70.9340 Asic[52]=73.9870 Asic[53]=74.3730 Asic[54]=73.7860 Asic[55]=78.0140 Asic[56]=82.8290
Asic[57]=74.6080 Asic[58]=78.1980 Asic[59]=70.9670 Asic[60]=70.1280 Asic[61]=75.8330 Asic[62]=74.5410 Asic[63]=72.2760
get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=54
Chain[5] Chip[62] junction temperature=123
Special fix Chain[5] Chip[62] middle Temp = 69
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=50
Chain[6] Chip[62] junction temperature=59
Special fix Chain[6] Chip[62] middle Temp = 65
Done read temp on Chain[6]
read failed on Chain[7] Chip[62] middle Temp old value:15
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Max pcb temp : 54
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=241
Jump to: