Hello to everyone .
I am facing a problem with one of my S9's. While running with 3 red lights on the 3 hashboards suddenly the last one red light goes off and in miner status from 63chips it shows only 1chip active. Fans working perfect and power supply changed also. However i've replace it with one my spare ones and worked for 7-10minutes then reboots . So now its working with only 2 hashboards with not problem. Might me the control board?
Any ideas what's going on?
Antminer S9
Hostname antMiner
Model GNU/Linux
Hardware Version 30.0.1.3
Kernel Version Linux 3.14.0-xilinx-gb190cb0-dirty #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
File System Version Mon Jul 1 11:19:33 CST 2019
Logic Version V1.3.39
BMminer Version 2.0.0
Here is the kernel log as running with the 3rd hashboard.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000293] ps7-ttc #0 at df804000, irq=43
[ 0.000597] Console: colour dummy device 80x30
[ 0.000626] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040197] pid_max: default: 32768 minimum: 301
[ 0.040406] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040424] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042576] CPU: Testing write buffer coherency: ok
[ 0.042887] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042944] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043159] L310 cache controller enabled
[ 0.043178] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120986] CPU1: Booted secondary processor
[ 0.210219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210350] Brought up 2 CPUs
[ 0.210370] SMP: Total of 2 processors activated.
[ 0.210378] CPU: All CPU(s) started in SVC mode.
[ 0.211033] devtmpfs: initialized
[ 0.213426] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214612] regulator-dummy: no parameters
[ 0.221976] NET: Registered protocol family 16
[ 0.224257] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226508] cpuidle: using governor ladder
[ 0.226521] cpuidle: using governor menu
[ 0.233813] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235307] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235320] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235430] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.256817] bio: create slab at 0
[ 0.258169] vgaarb: loaded
[ 0.258843] SCSI subsystem initialized
[ 0.259707] usbcore: registered new interface driver usbfs
[ 0.259875] usbcore: registered new interface driver hub
[ 0.260110] usbcore: registered new device driver usb
[ 0.260674] media: Linux media interface: v0.10
[ 0.260836] Linux video capture interface: v2.00
[ 0.261285] pps_core: LinuxPPS API ver. 1 registered
[ 0.261297] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.261435] PTP clock support registered
[ 0.261786] EDAC MC: Ver: 3.0.0
[ 0.262823] Advanced Linux Sound Architecture Driver Initialized.
[ 0.265561] DMA-API: preallocated 4096 debug entries
[ 0.265575] DMA-API: debugging enabled by kernel config
[ 0.265646] Switched to clocksource arm_global_timer
[ 0.286003] NET: Registered protocol family 2
[ 0.286638] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.286695] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.286780] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.286823] TCP: reno registered
[ 0.286839] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.286869] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287095] NET: Registered protocol family 1
[ 0.287430] RPC: Registered named UNIX socket transport module.
[ 0.287442] RPC: Registered udp transport module.
[ 0.287451] RPC: Registered tcp transport module.
[ 0.287459] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.287471] PCI: CLS 0 bytes, default 64
[ 0.287897] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.289854] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.291926] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.292118] msgmni has been set to 967
[ 0.292877] io scheduler noop registered
[ 0.292890] io scheduler deadline registered
[ 0.292930] io scheduler cfq registered (default)
[ 0.306666] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.306685] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.429771] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.997789] console [ttyPS0] enabled
[ 1.002034] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.009642] [drm] Initialized drm 1.1.0 20060810
[ 1.026567] brd: module loaded
[ 1.035928] loop: module loaded
[ 1.045193] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.051002] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.058757] libphy: XEMACPS mii bus: probed
[ 1.063125] ------------- phy_id = 0x3625e62
[ 1.068037] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.076617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.083238] ehci-pci: EHCI PCI platform driver
[ 1.090639] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.097542] usbcore: registered new interface driver usb-storage
[ 1.104358] mousedev: PS/2 mouse device common for all mice
[ 1.110479] i2c /dev entries driver
[ 1.117363] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.122840] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.128751] Xilinx Zynq CpuIdle Driver started
[ 1.133587] sdhci: Secure Digital Host Controller Interface driver
[ 1.139794] sdhci: Copyright(c) Pierre Ossman
[ 1.144065] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.150876] mmc0: no vqmmc regulator found
[ 1.154892] mmc0: no vmmc regulator found
[ 1.195675] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.204355] usbcore: registered new interface driver usbhid
[ 1.209871] usbhid: USB HID core driver
[ 1.214556] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.220843] nand: Micron MT29F2G08ABAEAWP
[ 1.224818] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.230757] Bad block table found at page 131008, version 0x01
[ 1.236996] Bad block table found at page 130944, version 0x01
[ 1.242969] nand_read_bbt: bad block at 0x000000140000
[ 1.248115] 3 ofpart partitions found on MTD device pl353-nand
[ 1.253860] Creating 3 MTD partitions on "pl353-nand":
[ 1.259007] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.267004] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.274272] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.283152] TCP: cubic registered
[ 1.286422] NET: Registered protocol family 17
[ 1.291062] Registering SWP/SWPB emulation handler
[ 1.296977] regulator-dummy: disabling
[ 1.301228] UBI: attaching mtd1 to ubi0
[ 1.828446] UBI: scanning is finished
[ 1.840054] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.847131] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.853874] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.860577] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.867435] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.873404] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.880535] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2138264797
[ 1.889565] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.898782] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.898787] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.902627] ALSA device list:
[ 1.902631] No soundcards found.
[ 1.919087] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.948276] UBIFS: recovery needed
[ 2.043640] UBIFS: recovery completed
[ 2.047328] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.053253] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.062386] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.072271] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.077311] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 17F5A1A5-D13B-40BF-B801-9899D86E5DF6, small LPT model
[ 2.088361] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.095062] devtmpfs: mounted
[ 2.098188] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.931201] random: dd urandom read with 0 bits of entropy available
[ 3.345695]
[ 3.345695] bcm54xx_config_init
[ 4.405702]
[ 4.405702] bcm54xx_config_init
[ 7.406519] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.412612] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 21.875728] In axi fpga driver!
[ 21.878794] request_mem_region OK!
[ 21.882185] AXI fpga dev virtual address is 0xdf9fc000
[ 21.887318] *base_vir_addr = 0xc51e
[ 21.901913] In fpga mem driver!
[ 21.905253] request_mem_region OK!
[ 21.908875] fpga mem virtual address is 0xe2000000
[ 22.695665]
[ 22.695665] bcm54xx_config_init
[ 23.775669]
[ 23.775669] bcm54xx_config_init
[ 26.776525] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 26.782546] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 909.747994] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6fa7000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5da0000
forceFreq=-1 forceFlag=0
min work minertest[0]:912
DETECT HW version=0000c51e
miner ID : 815435c1207b885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0xcc
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[0] has core num=1
Chain[5] ASIC[1] has core num=1
Chain[5] ASIC[2] has core num=1
Chain[5] ASIC[3] has core num=1
Chain[5] ASIC[4] has core num=2
Chain[5] ASIC[5] has core num=1
Chain[5] ASIC[6] has core num=1
Chain[5] ASIC[7] has core num=1
Chain[5] ASIC[8] has core num=1
Chain[5] ASIC[10] has core num=1
Chain[5] ASIC[11] has core num=7
Chain[5] ASIC[12] has core num=1
Chain[5] ASIC[13] has core num=2
Chain[5] ASIC[15] has core num=2
Chain[5] ASIC[16] has core num=5
Chain[5] ASIC[17] has core num=1
Chain[5] ASIC[18] has core num=1
Chain[5] ASIC[19] has core num=2
Chain[5] ASIC[20] has core num=1
Chain[5] ASIC[21] has core num=1
Chain[5] ASIC[22] has core num=1
Chain[5] ASIC[23] has core num=1
Chain[5] ASIC[24] has core num=1
Chain[5] ASIC[25] has core num=10
Chain[5] ASIC[26] has core num=1
Chain[5] ASIC[27] has core num=1
Chain[5] ASIC[28] has core num=2
Chain[5] ASIC[29] has core num=1
Chain[5] ASIC[30] has core num=1
Chain[5] ASIC[31] has core num=1
Chain[5] ASIC[32] has core num=15
Chain[5] ASIC[33] has core num=1
Chain[5] ASIC[34] has core num=1
Chain[5] ASIC[35] has core num=1
Chain[5] ASIC[36] has core num=1
Chain[5] ASIC[37] has core num=5
Chain[5] ASIC[38] has core num=1
Chain[5] ASIC[39] has core num=1
Chain[5] ASIC[40] has core num=1
Chain[5] ASIC[41] has core num=1
Chain[5] ASIC[43] has core num=2
Chain[5] ASIC[44] has core num=2
Chain[5] ASIC[45] has core num=2
Chain[5] ASIC[46] has core num=15
Chain[5] ASIC[47] has core num=1
Chain[5] ASIC[48] has core num=2
Chain[5] ASIC[49] has core num=7
Chain[5] ASIC[50] has core num=2
Chain[5] ASIC[51] has core num=1
Chain[5] ASIC[52] has core num=1
Chain[5] ASIC[53] has core num=2
Chain[5] ASIC[54] has core num=1
Chain[5] ASIC[55] has core num=2
Chain[5] ASIC[56] has core num=1
Chain[5] ASIC[57] has core num=1
Chain[5] ASIC[58] has core num=2
Chain[5] ASIC[59] has core num=1
Chain[5] ASIC[61] has core num=1
Chain[5] ASIC[62] has core num=1
Check chain[5] PIC fw version=0xcc
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[2] has core num=15
Chain[6] ASIC[20] has core num=1
Chain[6] ASIC[24] has core num=11
Chain[6] ASIC[37] has core num=15
Chain[6] ASIC[41] has core num=1
Chain[6] ASIC[42] has core num=15
Chain[6] ASIC[45] has core num=2
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[14] has core num=4
Chain[7] ASIC[16] has core num=1
Chain[7] ASIC[35] has core num=1
Chain[7] ASIC[38] has core num=2
Chain[7] ASIC[40] has core num=1
Chain[7] ASIC[42] has core num=15
Chain[7] ASIC[43] has core num=1
Chain[7] ASIC[45] has core num=1
Chain[7] ASIC[46] has core num=1
Chain[7] ASIC[48] has core num=1
Chain[7] ASIC[49] has core num=2
Chain[7] ASIC[56] has core num=4
Chain[7] ASIC[58] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=204 on chain[5], value=820
get PIC voltage=125 on chain[6], value=870
get PIC voltage=125 on chain[7], value=870
chain[5] temp offset record: -52,-52,-52,-52,-52,-52,-52,-52
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1838 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Jul 1 11:19:33 CST 2019 type: Antminer S9
miner ID : 815435c1207b885c
Checking fans...
get fan[4] speed=4440
get fan[4] speed=4440
get fan[5] speed=5760
get fan[4] speed=4440
get fan[5] speed=5760
get fan[4] speed=4440
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x04 0x4f 0x0f 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x0f 0x4f 0x0f 0x4f 0x0f 0x4f 0x0f 0x4f 0x05 0x4f 0x07 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
No scan based on domain
Check chain[5] PIC fw version=0x10
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x00 0x50 0x00 0x50 0x05 0x50 0x00 0x50 0x00 0x50 0x03 0x50 0x03 0x50 0x03 0x50 0x03 0x50 0x03 0x50 0x03 0x50 0x01 0x50 0x01 0x50 0x0f 0x50 0x0f 0x50 0x0f 0x50 0x0f 0x50 0x05 0x50 0x07 0x50 0x23 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50 0x00 0x50
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
last_freq: 0x00 0x7d 0x0f 0x4e 0x0b 0x4e 0x04 0x4e 0x0e 0x4e 0x00 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x03 0x4e 0x01 0x4e 0x01 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x0f 0x4e 0x05 0x4e 0x07 0x4e 0x23 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e 0x00 0x4e
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=870
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=204 value=820
Chain[J6] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=820
Chain[J6] will use backup chain_voltage_pic=870 [125]
Chain[J6] get working chain_voltage_pic=125
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J7] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=870
Chain[J8] orignal chain_voltage_pic=125 value=870
Chain[J8] original chain_voltage_value=870 adjusted chain_voltage_value:870, value=870
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[0] has core num=1
Chain[J6] ASIC[1] has core num=1
Chain[J6] ASIC[2] has core num=1
Chain[J6] ASIC[3] has core num=1
Chain[J6] ASIC[4] has core num=2
Chain[J6] ASIC[5] has core num=1
Chain[J6] ASIC[6] has core num=1
Chain[J6] ASIC[7] has core num=1
Chain[J6] ASIC[8] has core num=1
Chain[J6] ASIC[10] has core num=1
Chain[J6] ASIC[11] has core num=7
Chain[J6] ASIC[12] has core num=1
Chain[J6] ASIC[13] has core num=2
Chain[J6] ASIC[15] has core num=2
Chain[J6] ASIC[16] has core num=5
Chain[J6] ASIC[17] has core num=1
Chain[J6] ASIC[18] has core num=1
Chain[J6] ASIC[19] has core num=2
Chain[J6] ASIC[20] has core num=1
Chain[J6] ASIC[21] has core num=1
Chain[J6] ASIC[22] has core num=1
Chain[J6] ASIC[23] has core num=1
Chain[J6] ASIC[24] has core num=1
Chain[J6] ASIC[25] has core num=10
Chain[J6] ASIC[26] has core num=1
Chain[J6] ASIC[27] has core num=1
Chain[J6] ASIC[28] has core num=2
Chain[J6] ASIC[29] has core num=1
Chain[J6] ASIC[30] has core num=1
Chain[J6] ASIC[31] has core num=1
Chain[J6] ASIC[32] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[34] has core num=1
Chain[J6] ASIC[35] has core num=1
Chain[J6] ASIC[36] has core num=1
Chain[J6] ASIC[37] has core num=5
Chain[J6] ASIC[38] has core num=1
Chain[J6] ASIC[39] has core num=1
Chain[J6] ASIC[40] has core num=1
Chain[J6] ASIC[41] has core num=1
Chain[J6] ASIC[43] has core num=2
Chain[J6] ASIC[44] has core num=2
Chain[J6] ASIC[45] has core num=2
Chain[J6] ASIC[46] has core num=15
Chain[J6] ASIC[47] has core num=1
Chain[J6] ASIC[48] has core num=2
Chain[J6] ASIC[49] has core num=7
Chain[J6] ASIC[50] has core num=2
Chain[J6] ASIC[51] has core num=1
Chain[J6] ASIC[52] has core num=1
Chain[J6] ASIC[53] has core num=2
Chain[J6] ASIC[54] has core num=1
Chain[J6] ASIC[55] has core num=2
Chain[J6] ASIC[56] has core num=1
Chain[J6] ASIC[57] has core num=1
Chain[J6] ASIC[58] has core num=2
Chain[J6] ASIC[59] has core num=1
Chain[J6] ASIC[61] has core num=1
Chain[J6] ASIC[62] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[2] has core num=15
Chain[J7] ASIC[20] has core num=1
Chain[J7] ASIC[24] has core num=11
Chain[J7] ASIC[37] has core num=15
Chain[J7] ASIC[41] has core num=1
Chain[J7] ASIC[42] has core num=15
Chain[J7] ASIC[45] has core num=2
Chain[J8] has core num in PIC
Chain[J8] ASIC[14] has core num=4
Chain[J8] ASIC[16] has core num=1
Chain[J8] ASIC[35] has core num=1
Chain[J8] ASIC[38] has core num=2
Chain[J8] ASIC[40] has core num=1
Chain[J8] ASIC[42] has core num=15
Chain[J8] ASIC[43] has core num=1
Chain[J8] ASIC[45] has core num=1
Chain[J8] ASIC[46] has core num=1
Chain[J8] ASIC[48] has core num=1
Chain[J8] ASIC[49] has core num=2
Chain[J8] ASIC[56] has core num=4
Chain[J8] ASIC[58] has core num=15
miner total rate=14038GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=820 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=681
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:5 max freq=681
Chain:5 min freq=681
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:687 Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687
Asic[ 8]:687 Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687
Asic[16]:687 Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687
Asic[24]:687 Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687
Asic[32]:687 Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:6 max freq=687
Chain:6 min freq=687
read PIC voltage=910 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=675
Miner fix freq ...
totalRate = 14038, fixed_totalRate = 14140
read PIC voltage=820 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=681
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:5 max freq=681
Chain:5 min freq=681
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:687 Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687
Asic[ 8]:687 Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687
Asic[16]:687 Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687
Asic[24]:687 Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687
Asic[32]:687 Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:6 max freq=687
Chain:6 min freq=687
read PIC voltage=910 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=675
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675
Chain:7 max freq=675
Chain:7 min freq=675
max freq = 687
totalRate = 14038, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: -52,-52,-52,-52,-52,-52,-52,-52,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Warning: Chain[J6] has no temp offset in PIC! will fix it
Chain[J6] use default temp chip[244]
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9C)
New offset Chain[6] chip[244] local:-64 remote:-64 offset:21
Chain[J6] chip[244] get middle temp offset=21 typeID=00
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:22 remote:28 offset:23
Chain[J7] chip[244] get middle temp offset=23 typeID=55
Chain[J8] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[8] temp chip I2C addr=0x98
chain[8] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[8] chip[244] local:20 remote:25 offset:24
Chain[J8] chip[244] get middle temp offset=24 typeID=55
single board rate=4668 voltage limit=940 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 940
single board rate=4688 voltage limit=940 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 940
single board rate=4681 voltage limit=940 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 940
setting to working voltage...
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[6] set voltage to 870
chain[7] set voltage to 870
start thread for read temp
setStartTimePoint total_tv_start_sys=136 total_tv_end_sys=137
restartNum = 2 , auto-reinit enabled...
mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/14000"]}
mining.subscribe:{"id": 1, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/14000"]}
mining.subscribe:{"id": 2, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/14000"]}
bring_up_pcb_temp = 37
avg hash rate = 9359.476686, ideal hash rate = 14000
hash rate is low...
re_open_core_times: 1
re_open_core enter
Before read Chain[J6] org chain_voltage_pic=125]
After read Chain[J6] new chain_voltage_pic=204 read pic=204
Before read Chain[J7] org chain_voltage_pic=125]
After read Chain[J7] new chain_voltage_pic=125 read pic=125
Before read Chain[J8] org chain_voltage_pic=125]
After read Chain[J8] new chain_voltage_pic=125 read pic=125
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 1 asic
i = 7, retry_count = 0, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 1, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 2, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 3, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 4, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 5, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 6, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 7, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 8, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 9, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 10, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 11, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 12, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 13, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 14, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 15, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 16, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 17, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 18, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 19, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[0] has core num=1
Chain[J6] ASIC[1] has core num=1
Chain[J6] ASIC[2] has core num=1
Chain[J6] ASIC[3] has core num=1
Chain[J6] ASIC[4] has core num=2
Chain[J6] ASIC[5] has core num=1
Chain[J6] ASIC[6] has core num=1
Chain[J6] ASIC[7] has core num=1
Chain[J6] ASIC[8] has core num=1
Chain[J6] ASIC[10] has core num=1
Chain[J6] ASIC[11] has core num=7
Chain[J6] ASIC[12] has core num=1
Chain[J6] ASIC[13] has core num=2
Chain[J6] ASIC[15] has core num=2
Chain[J6] ASIC[16] has core num=5
Chain[J6] ASIC[17] has core num=1
Chain[J6] ASIC[18] has core num=1
Chain[J6] ASIC[19] has core num=2
Chain[J6] ASIC[20] has core num=1
Chain[J6] ASIC[21] has core num=1
Chain[J6] ASIC[22] has core num=1
Chain[J6] ASIC[23] has core num=1
Chain[J6] ASIC[24] has core num=1
Chain[J6] ASIC[25] has core num=10
Chain[J6] ASIC[26] has core num=1
Chain[J6] ASIC[27] has core num=1
Chain[J6] ASIC[28] has core num=2
Chain[J6] ASIC[29] has core num=1
Chain[J6] ASIC[30] has core num=1
Chain[J6] ASIC[31] has core num=1
Chain[J6] ASIC[32] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[34] has core num=1
Chain[J6] ASIC[35] has core num=1
Chain[J6] ASIC[36] has core num=1
Chain[J6] ASIC[37] has core num=5
Chain[J6] ASIC[38] has core num=1
Chain[J6] ASIC[39] has core num=1
Chain[J6] ASIC[40] has core num=1
Chain[J6] ASIC[41] has core num=1
Chain[J6] ASIC[43] has core num=2
Chain[J6] ASIC[44] has core num=2
Chain[J6] ASIC[45] has core num=2
Chain[J6] ASIC[46] has core num=15
Chain[J6] ASIC[47] has core num=1
Chain[J6] ASIC[48] has core num=2
Chain[J6] ASIC[49] has core num=7
Chain[J6] ASIC[50] has core num=2
Chain[J6] ASIC[51] has core num=1
Chain[J6] ASIC[52] has core num=1
Chain[J6] ASIC[53] has core num=2
Chain[J6] ASIC[54] has core num=1
Chain[J6] ASIC[55] has core num=2
Chain[J6] ASIC[56] has core num=1
Chain[J6] ASIC[57] has core num=1
Chain[J6] ASIC[58] has core num=2
Chain[J6] ASIC[59] has core num=1
Chain[J6] ASIC[61] has core num=1
Chain[J6] ASIC[62] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[2] has core num=15
Chain[J7] ASIC[20] has core num=1
Chain[J7] ASIC[24] has core num=11
Chain[J7] ASIC[37] has core num=15
Chain[J7] ASIC[41] has core num=1
Chain[J7] ASIC[42] has core num=15
Chain[J7] ASIC[45] has core num=2
Chain[J8] has core num in PIC
Chain[J8] ASIC[14] has core num=4
Chain[J8] ASIC[16] has core num=1
Chain[J8] ASIC[35] has core num=1
Chain[J8] ASIC[38] has core num=2
Chain[J8] ASIC[40] has core num=1
Chain[J8] ASIC[42] has core num=15
Chain[J8] ASIC[43] has core num=1
Chain[J8] ASIC[45] has core num=1
Chain[J8] ASIC[46] has core num=1
Chain[J8] ASIC[48] has core num=1
Chain[J8] ASIC[49] has core num=2
Chain[J8] ASIC[56] has core num=4
Chain[J8] ASIC[58] has core num=15
miner total rate=14038GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=820 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=681
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:5 max freq=681
Chain:5 min freq=681
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:687 Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687
Asic[ 8]:687 Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687
Asic[16]:687 Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687
Asic[24]:687 Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687
Asic[32]:687 Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:6 max freq=687
Chain:6 min freq=687
read PIC voltage=910 on chain[7]
Chain:7 chipnum=1
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=675
Asic[ 0]:675
Chain:7 max freq=675
Chain:7 min freq=675
Miner fix freq ...
totalRate = 14038, fixed_totalRate = 14140
read PIC voltage=820 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=681
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:5 max freq=681
Chain:5 min freq=681
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:687 Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687
Asic[ 8]:687 Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687
Asic[16]:687 Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687
Asic[24]:687 Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687
Asic[32]:687 Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:6 max freq=687
Chain:6 min freq=687
read PIC voltage=910 on chain[7]
Chain:7 chipnum=1
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=675
Asic[ 0]:675
Chain:7 max freq=675
Chain:7 min freq=675
max freq = 687
totalRate = 14038, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: -52,-52,-52,-52,-52,-52,-52,-52,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Warning: Chain[J6] has no temp offset in PIC! will fix it
Chain[J6] use default temp chip[244]
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9C)
New offset Chain[6] chip[244] local:-64 remote:-64 offset:21
Chain[J6] chip[244] get middle temp offset=21 typeID=00
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:21 remote:28 offset:22
Chain[J7] chip[244] get middle temp offset=22 typeID=55
setting to working voltage...
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[6] set voltage to 870
chain[7] set voltage to 870
reopen core end
re_open_core_times: 2
re_open_core enter
Before read Chain[J6] org chain_voltage_pic=204]
After read Chain[J6] new chain_voltage_pic=204 read pic=204
Before read Chain[J7] org chain_voltage_pic=125]
After read Chain[J7] new chain_voltage_pic=125 read pic=125
Before read Chain[J8] org chain_voltage_pic=125]
After read Chain[J8] new chain_voltage_pic=125 read pic=125
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 1 asic
i = 7, retry_count = 0, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 1, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 2, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 3, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 4, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 5, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 6, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 7, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 8, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 9, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 10, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 11, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 12, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 13, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 14, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 15, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 16, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 17, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 18, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
i = 7, retry_count = 19, dev->chain_asic_num[i] = 1
retry Chain[J8] has 1 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[0] has core num=1
Chain[J6] ASIC[1] has core num=1
Chain[J6] ASIC[2] has core num=1
Chain[J6] ASIC[3] has core num=1
Chain[J6] ASIC[4] has core num=2
Chain[J6] ASIC[5] has core num=1
Chain[J6] ASIC[6] has core num=1
Chain[J6] ASIC[7] has core num=1
Chain[J6] ASIC[8] has core num=1
Chain[J6] ASIC[10] has core num=1
Chain[J6] ASIC[11] has core num=7
Chain[J6] ASIC[12] has core num=1
Chain[J6] ASIC[13] has core num=2
Chain[J6] ASIC[15] has core num=2
Chain[J6] ASIC[16] has core num=5
Chain[J6] ASIC[17] has core num=1
Chain[J6] ASIC[18] has core num=1
Chain[J6] ASIC[19] has core num=2
Chain[J6] ASIC[20] has core num=1
Chain[J6] ASIC[21] has core num=1
Chain[J6] ASIC[22] has core num=1
Chain[J6] ASIC[23] has core num=1
Chain[J6] ASIC[24] has core num=1
Chain[J6] ASIC[25] has core num=10
Chain[J6] ASIC[26] has core num=1
Chain[J6] ASIC[27] has core num=1
Chain[J6] ASIC[28] has core num=2
Chain[J6] ASIC[29] has core num=1
Chain[J6] ASIC[30] has core num=1
Chain[J6] ASIC[31] has core num=1
Chain[J6] ASIC[32] has core num=15
Chain[J6] ASIC[33] has core num=1
Chain[J6] ASIC[34] has core num=1
Chain[J6] ASIC[35] has core num=1
Chain[J6] ASIC[36] has core num=1
Chain[J6] ASIC[37] has core num=5
Chain[J6] ASIC[38] has core num=1
Chain[J6] ASIC[39] has core num=1
Chain[J6] ASIC[40] has core num=1
Chain[J6] ASIC[41] has core num=1
Chain[J6] ASIC[43] has core num=2
Chain[J6] ASIC[44] has core num=2
Chain[J6] ASIC[45] has core num=2
Chain[J6] ASIC[46] has core num=15
Chain[J6] ASIC[47] has core num=1
Chain[J6] ASIC[48] has core num=2
Chain[J6] ASIC[49] has core num=7
Chain[J6] ASIC[50] has core num=2
Chain[J6] ASIC[51] has core num=1
Chain[J6] ASIC[52] has core num=1
Chain[J6] ASIC[53] has core num=2
Chain[J6] ASIC[54] has core num=1
Chain[J6] ASIC[55] has core num=2
Chain[J6] ASIC[56] has core num=1
Chain[J6] ASIC[57] has core num=1
Chain[J6] ASIC[58] has core num=2
Chain[J6] ASIC[59] has core num=1
Chain[J6] ASIC[61] has core num=1
Chain[J6] ASIC[62] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[2] has core num=15
Chain[J7] ASIC[20] has core num=1
Chain[J7] ASIC[24] has core num=11
Chain[J7] ASIC[37] has core num=15
Chain[J7] ASIC[41] has core num=1
Chain[J7] ASIC[42] has core num=15
Chain[J7] ASIC[45] has core num=2
Chain[J8] has core num in PIC
Chain[J8] ASIC[14] has core num=4
Chain[J8] ASIC[16] has core num=1
Chain[J8] ASIC[35] has core num=1
Chain[J8] ASIC[38] has core num=2
Chain[J8] ASIC[40] has core num=1
Chain[J8] ASIC[42] has core num=15
Chain[J8] ASIC[43] has core num=1
Chain[J8] ASIC[45] has core num=1
Chain[J8] ASIC[46] has core num=1
Chain[J8] ASIC[48] has core num=1
Chain[J8] ASIC[49] has core num=2
Chain[J8] ASIC[56] has core num=4
Chain[J8] ASIC[58] has core num=15
miner total rate=14038GH/s ideal_total_hash_rate = 14000GH/s
read PIC voltage=820 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=681
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:5 max freq=681
Chain:5 min freq=681
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:687 Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687
Asic[ 8]:687 Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687
Asic[16]:687 Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687
Asic[24]:687 Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687
Asic[32]:687 Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:6 max freq=687
Chain:6 min freq=687
read PIC voltage=910 on chain[7]
Chain:7 chipnum=1
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=675
Asic[ 0]:675
Chain:7 max freq=675
Chain:7 min freq=675
Miner fix freq ...
totalRate = 14038, fixed_totalRate = 14140
read PIC voltage=820 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=681
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681
Chain:5 max freq=681
Chain:5 min freq=681
read PIC voltage=910 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:687 Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687
Asic[ 8]:687 Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687
Asic[16]:687 Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687
Asic[24]:687 Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687
Asic[32]:687 Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687
Asic[40]:687 Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687
Asic[48]:687 Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687
Asic[56]:687 Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:6 max freq=687
Chain:6 min freq=687
read PIC voltage=910 on chain[7]
Chain:7 chipnum=1
Chain[J8] voltage added=0.0V
Chain:7 temp offset=-5
Chain:7 base freq=675
Asic[ 0]:675
Chain:7 max freq=675
Chain:7 min freq=675
max freq = 687
totalRate = 14038, fixed_totalRate = 14000
set baud=1
Chain[J6] PIC temp offset: -52,-52,-52,-52,-52,-52,-52,-52,0,0,0,0,0,0,0,0,0,0,
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Warning: Chain[J6] has no temp offset in PIC! will fix it
Chain[J6] use default temp chip[244]
Chain[J6] try read temp chip[244] ID=3f (I2C addr=0x98)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J6] try read temp chip[244] ID=3f (I2C addr=0x9C)
New offset Chain[6] chip[244] local:-1 remote:-1 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=3f
Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:21 remote:27 offset:23
Chain[J7] chip[244] get middle temp offset=23 typeID=55
setting to working voltage...
chain[6] set voltage to 900
chain[7] set voltage to 900
chain[6] set voltage to 890
chain[7] set voltage to 890
chain[6] set voltage to 880
chain[7] set voltage to 880
chain[6] set voltage to 870
chain[7] set voltage to 870
reopen core end
do read_temp_func once...
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=75.9330 Asic[02]=77.0400 Asic[03]=40.5330 Asic[04]=77.3590 Asic[05]=71.6050 Asic[06]=74.0710 Asic[07]=74.1550 Asic[08]=71.1010
Asic[09]=71.0170 Asic[10]=71.6550 Asic[11]=69.1380 Asic[12]=55.2130 Asic[13]=70.0780 Asic[14]=45.4490 Asic[15]=81.0840 Asic[16]=70.1790
Asic[17]=39.0900 Asic[18]=65.7490 Asic[19]=70.5480 Asic[20]=79.2550 Asic[21]=60.4810 Asic[22]=74.6580 Asic[23]=71.3360 Asic[24]=38.9230
Asic[25]=67.8630 Asic[26]=49.9120 Asic[27]=73.4330 Asic[28]=58.5860 Asic[29]=115.158 Asic[30]=67.9640 Asic[31]=75.8160 Asic[32]=71.9740
Asic[33]=45.7850 Asic[34]=67.8970 Asic[35]=71.2520 Asic[36]=70.3800 Asic[37]=75.8330 Asic[38]=68.4340 Asic[39]=72.3430 Asic[40]=72.2760
Asic[41]=63.7700 Asic[42]=75.8160 Asic[43]=75.6980 Asic[44]=78.1140 Asic[45]=62.9810 Asic[46]=66.5550 Asic[47]=43.8720 Asic[48]=66.3030
Asic[49]=72.4600 Asic[50]=36.8930 Asic[51]=75.7820 Asic[52]=71.0510 Asic[53]=44.7440 Asic[54]=71.6550 Asic[55]=76.0000 Asic[56]=69.0710
Asic[57]=88.6340 Asic[58]=67.8970 Asic[59]=76.5040 Asic[60]=47.7810 Asic[61]=66.3870 Asic[62]=77.0910 Asic[63]=73.8020
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=75.7820 Asic[02]=79.7250 Asic[03]=40.2140 Asic[04]=67.3430 Asic[05]=64.4580 Asic[06]=73.3330 Asic[07]=81.6540 Asic[08]=69.3730
Asic[09]=72.0070 Asic[10]=73.7020 Asic[11]=66.4880 Asic[12]=69.1050 Asic[13]=69.1550 Asic[14]=69.5240 Asic[15]=73.5170 Asic[16]=80.9160
Asic[17]=67.5610 Asic[18]=74.1380 Asic[19]=76.8220 Asic[20]=71.4870 Asic[21]=78.5000 Asic[22]=67.5280 Asic[23]=78.1310 Asic[24]=70.8500
Asic[25]=63.2500 Asic[26]=71.2690 Asic[27]=75.5980 Asic[28]=72.8290 Asic[29]=115.511 Asic[30]=71.6210 Asic[31]=63.5350 Asic[32]=65.8840
Asic[33]=73.9370 Asic[34]=71.4700 Asic[35]=68.7860 Asic[36]=72.4940 Asic[37]=70.5310 Asic[38]=14.2100 Asic[39]=76.8220 Asic[40]=74.9940
Asic[41]=78.0300 Asic[42]=70.2460 Asic[43]=40.5000 Asic[44]=75.5640 Asic[45]=75.8160 Asic[46]=69.2060 Asic[47]=72.5780 Asic[48]=76.8730
Asic[49]=71.2520 Asic[50]=70.9840 Asic[51]=72.2090 Asic[52]=69.0380 Asic[53]=69.9770 Asic[54]=72.6620 Asic[55]=72.6450 Asic[56]=71.1680
Asic[57]=109.756 Asic[58]=79.9260 Asic[59]=72.7620 Asic[60]=76.4200 Asic[61]=65.4140 Asic[62]=77.1580 Asic[63]=71.7050
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[29]=115.158000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[29]=115.511000
Asic[57]=109.756000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[03]=103.079000
Asic[29]=162.806000
Asic[39]=111.669000
Asic[43]=103.079000
Asic[57]=156.111000
Asic[60]=103.079000
Done check_asic_reg
read failed on Chain[5] Chip[62] middle Temp old value:15
Special fix Chain[5] Chip[62] middle Temp = 15
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=42
Chain[6] Chip[62] junction temperature=33
Special fix Chain[6] Chip[62] middle Temp = 57
Done read temp on Chain[6]
Done read temp on Chain[7]
Max pcb temp : 42
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=68
Thanks in advance