I'm debating fixing S9's, getting good with S7's. Does it run if you slow the clock down to 200mhz or so?
C
C
Its an autotune s9, you cant adjust its speed.
Topic: s9 hasing 9ths why? (Read 379 times)
Its an autotune s9, you cant adjust its speed.
I'm debating fixing S9's, getting good with S7's. Does it run if you slow the clock down to 200mhz or so?
C
C
I understand
thanks
can it be repair if it is a bad board?
or trash it and buy a new one?
thanks
can it be repair if it is a bad board?
or trash it and buy a new one?
It can be repaired by Bitmainwarranty.com
I understand
thanks
can it be repair if it is a bad board?
or trash it and buy a new one?
thanks
can it be repair if it is a bad board?
or trash it and buy a new one?
reflow some chip? like a notebook?
or just send it back to Bitmain and they repair the bad board?
I guess I can just unplug one board at the time and see which one is dying and let it unplugged meanwhile otherwise it will consume more electricity
thanks for your quick answer
Look at #8. 0 GH's.
or just send it back to Bitmain and they repair the bad board?
I guess I can just unplug one board at the time and see which one is dying and let it unplugged meanwhile otherwise it will consume more electricity
thanks for your quick answer
here screenshot
https://ibb.co/kfBrqG
https://ibb.co/kfBrqG
One of your boards is shutting off. It is probably on the edge of failure.
Look at #8. 0 GH's.
Again #8 is the one that is failing. Unplug one of the outside boards and see if it is still hashing at the same amount. If it is, the unplugged board is the bad one...if not, the one that is plugged in is the bad one.
reflow some chip? like a notebook?
or just send it back to Bitmain and they repair the bad board?
I guess I can just unplug one board at the time and see which one is dying and let it unplugged meanwhile otherwise it will consume more electricity
thanks for your quick answer
Look at #8. 0 GH's.
or just send it back to Bitmain and they repair the bad board?
I guess I can just unplug one board at the time and see which one is dying and let it unplugged meanwhile otherwise it will consume more electricity
thanks for your quick answer
here screenshot
https://ibb.co/kfBrqG
https://ibb.co/kfBrqG
One of your boards is shutting off. It is probably on the edge of failure.
Look at #8. 0 GH's.
here screenshot
https://ibb.co/kfBrqG
https://ibb.co/kfBrqG
One of your boards is shutting off. It is probably on the edge of failure.
Look at #8. 0 GH's.
here screenshot
https://ibb.co/kfBrqG
https://ibb.co/kfBrqG
One of your boards is shutting off. It is probably on the edge of failure.
even if I see the everything in 0000000000000 ?
One of your boards is shutting off. It is probably on the edge of failure.
hi I just upgraded the firmware to the latest one
and I still have this issue after reboot it works at 13th but after few hours it goes down to 9th
any idea why? and how to fix it?
and I still have this issue after reboot it works at 13th but after few hours it goes down to 9th
any idea why? and how to fix it?
Jump to: