Bitcoin Forum>Bitcoin>Mining>Mining support
Author

Topic: s9 is not hashing? (Read 190 times)

thierry4wd
sr. member
Activity: 446
Merit: 347
s9 is not hashing?
March 08, 2020, 05:34:01 AM
#9
yes is true Smiley

So, for me, you have "modified" firmware, i look this :

Code:
-driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
-driver-btm-c5.c:5119:set_frequency: max freq = 100

Your miner is fixed frequency, but not set freq on your config files ! (problem)
on your chain 5 , first, have problem with pic firm (need pickit3 for resolve)

For resolve this, unplug your chaine 5, after you need reflash good firmware, this is perfect S9J but compatible with all S9 / S9I / S9J (https://file12.bitmain.com/shop-product/firmware/Antminer%20S9j/Firmware/00720181108111659649oC0LlMOk06A7/Antminer-S9j-all-201811071118-autofreq-user-Update2UBI-NF.tar.gz)

Flash this, without keep settings.
mikeywith
legendary
Activity: 2394
Merit: 6581
be constructive or S.T.F.U
Re: s9 is not hashing?
March 07, 2020, 06:58:19 PM
#8
This is most likely and issue with the hex on the hash boards, you will need a special tool to fix the issue, more details can be found here, the most common reason for this issue to happen is a bad firmware, you have not mentioned a thing about it, but I am pretty sure you have tried flashing a firmware and got your miners f***, if it was not you, then probably a malware did it.

If you are lucky enough, a different firmware might solve the issue, since every firmware deals with the hash boards in a different way, you might get away with just flashing BraiinOs or Vnish aka Asic.to and AwesomeMiner, so before purchasing the tool/s try a different firmware.

Quote
Thanks guys! will send 10 USD in BTC for the first to find the soution for this miner.
 

I would personally not accept money if I were to provide a solution on forum, I have been helping a dozen members and never asked/accepted money for it, I am sure many other members share the same thoughts because after all, we've all learned a lot from this forum for FREE.
philipma1957
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Re: s9 is not hashing?
March 06, 2020, 11:13:15 PM
#7
Quote from: mairufu on March 06, 2020, 11:04:12 PM
sorry man, i didnt see your message.

i have 36 other S9s. 3 of them just started having this problem. I tired to swap to an apw5 from an apw3++. still no luck.

take them off line .

change passwords on your good units asap.

root
root

is easy to be fucked with.

try

root

root-then-lot-of-characters

I think the controllers may be fucked with.

Once you have long passwords on the good ones.

take a good controller and switch it to a dead s9

if the dead s9 works  you may have 3 bad controllers.

but get a good password on the s9's that work.
mairufu
newbie
Activity: 3
Merit: 0
Re: s9 is not hashing?
March 06, 2020, 11:04:12 PM
#6
sorry man, i didnt see your message.

i have 36 other S9s. 3 of them just started having this problem. I tired to swap to an apw5 from an apw3++. still no luck.
philipma1957
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Re: s9 is not hashing?
March 06, 2020, 11:01:26 PM
#5
let me ask again.

do you only have 1 s9 the broken one?

or do you have a few working s9's?

controller could be bad = very likely
firmware in controller could be bad = possible
boards can be bad  = very likely

eth cable bad = maybe
you filled the pools out wrong = maybe
bad psu = maybe

all 3 communication cables from controller to boards could be bad. = not that likely
pool connections could be bad = not likely

If you only have 1 s9 with 1 psu it will be hard to troubleshoot.
mairufu
newbie
Activity: 3
Merit: 0
Re: s9 is not hashing?
March 06, 2020, 10:42:10 PM
#4
i tried each board 1 by 1 and still no luck.. its saying 0.00000 Ghs
BitMaxz
legendary
Activity: 3374
Merit: 3095
Playbet.io - Crypto Casino and Sportsbook
Re: s9 is not hashing?
March 06, 2020, 09:41:56 PM
#3
Look at this part below.

Code:
main.c:2282: Check chain[5] PIC fw version=0x00
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[5]

[...]

driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x00

The Chain[5] is not running properly which might lead to the other two hashboards stop running.

Can you try to remove the first hashboard and test it again if the other two hashboard will run without any issue?

You can just remove the 6pin 12V and the ribbon cable from the first hashboard then run it again. Let see if you still see some error related to PIC FW.
philipma1957
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Re: s9 is not hashing?
March 06, 2020, 07:58:52 PM
#2
first step code the log to save size.

this is correct forum.

I would like to know to you have any working s9's.

If you do switch the psu from the good s9 and try to see if it works here.
mairufu
newbie
Activity: 3
Merit: 0
Re: s9 is not hashing?
March 06, 2020, 07:12:49 PM
#1
Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000291] ps7-ttc #0 at df804000, irq=43
[    0.000595] Console: colour dummy device 80x30
[    0.000624] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090241] pid_max: default: 32768 minimum: 301
[    0.090450] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090470] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092626] CPU: Testing write buffer coherency: ok
[    0.092932] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.092988] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.093209] L310 cache controller enabled
[    0.093229] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170986] CPU1: Booted secondary processor
[    0.260218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260348] Brought up 2 CPUs
[    0.260366] SMP: Total of 2 processors activated.
[    0.260374] CPU: All CPU(s) started in SVC mode.
[    0.261033] devtmpfs: initialized
[    0.263460] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264639] regulator-dummy: no parameters
[    0.271976] NET: Registered protocol family 16
[    0.274143] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276404] cpuidle: using governor ladder
[    0.276417] cpuidle: using governor menu
[    0.283767] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285280] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285294] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285404] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.307023] bio: create slab at 0
[    0.308370] vgaarb: loaded
[    0.309062] SCSI subsystem initialized
[    0.309904] usbcore: registered new interface driver usbfs
[    0.310085] usbcore: registered new interface driver hub
[    0.310448] usbcore: registered new device driver usb
[    0.310991] media: Linux media interface: v0.10
[    0.311531] Linux video capture interface: v2.00
[    0.311790] pps_core: LinuxPPS API ver. 1 registered
[    0.311802] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[    0.311925] PTP clock support registered
[    0.312277] EDAC MC: Ver: 3.0.0
[    0.313463] Advanced Linux Sound Architecture Driver Initialized.
[    0.316173] DMA-API: preallocated 4096 debug entries
[    0.316186] DMA-API: debugging enabled by kernel config
[    0.316253] Switched to clocksource arm_global_timer
[    0.335842] NET: Registered protocol family 2
[    0.336755] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.336812] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.336897] TCP: Hash tables configured (established 4096 bind 4096)
[    0.336943] TCP: reno registered
[    0.336959] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.336989] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.337702] NET: Registered protocol family 1
[    0.338113] RPC: Registered named UNIX socket transport module.
[    0.338125] RPC: Registered udp transport module.
[    0.338134] RPC: Registered tcp transport module.
[    0.338142] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338154] PCI: CLS 0 bytes, default 64
[    0.338574] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340541] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342590] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.342774] msgmni has been set to 967
[    0.343519] io scheduler noop registered
[    0.343532] io scheduler deadline registered
[    0.343573] io scheduler cfq registered (default)
[    0.354966] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.354986] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.475977] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.043484] console [ttyPS0] enabled
[    1.047751] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.055348] [drm] Initialized drm 1.1.0 20060810
[    1.072295] brd: module loaded
[    1.081644] loop: module loaded
[    1.091031] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.096870] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.104588] libphy: XEMACPS mii bus: probed
[    1.108986] ------------- phy_id = 0x3625e62
[    1.113682] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.122481] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.129126] ehci-pci: EHCI PCI platform driver
[    1.136501] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.143303] usbcore: registered new interface driver usb-storage
[    1.150205] mousedev: PS/2 mouse device common for all mice
[    1.156334] i2c /dev entries driver
[    1.163201] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.168732] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.174611] Xilinx Zynq CpuIdle Driver started
[    1.179505] sdhci: Secure Digital Host Controller Interface driver
[    1.185601] sdhci: Copyright(c) Pierre Ossman
[    1.189967] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.196812] mmc0: no vqmmc regulator found
[    1.200830] mmc0: no vmmc regulator found
[    1.236274] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.244945] usbcore: registered new interface driver usbhid
[    1.250456] usbhid: USB HID core driver
[    1.255156] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.261453] nand: Micron MT29F2G08ABAEAWP
[    1.265417] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.271355] Bad block table found at page 131008, version 0x01
[    1.277576] Bad block table found at page 130944, version 0x01
[    1.283626] 3 ofpart partitions found on MTD device pl353-nand
[    1.289408] Creating 3 MTD partitions on "pl353-nand":
[    1.294499] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.302551] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.309854] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.320577] TCP: cubic registered
[    1.323808] NET: Registered protocol family 17
[    1.328503] Registering SWP/SWPB emulation handler
[    1.334367] regulator-dummy: disabling
[    1.338702] UBI: attaching mtd1 to ubi0
[    1.863204] UBI: scanning is finished
[    1.874777] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.881854] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.888616] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.895281] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.902159] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.908139] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.915246] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.924289] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.933504] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.933510] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.937450] ALSA device list:
[    1.937453]   No soundcards found.
[    1.953788] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.982850] UBIFS: recovery needed
[    2.061622] UBIFS: recovery completed
[    2.065288] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.071234] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.080339] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.090227] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.095258] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.106555] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.113717] devtmpfs: mounted
[    2.116848] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.949899] random: dd urandom read with 1 bits of entropy available
[    3.326266]
[    3.326266] bcm54xx_config_init
[    4.386303]
[    4.386303] bcm54xx_config_init
[    8.387116] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    8.393219] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   25.508848] In axi fpga driver!
[   25.511915] request_mem_region OK!
[   25.515305] AXI fpga dev virtual address is 0xdf9fe000
[   25.520441] *base_vir_addr = 0xc51e
[   25.534987] In fpga mem driver!
[   25.538406] request_mem_region OK!
[   25.541908] fpga mem virtual address is 0xe2000000
[   26.336272]
[   26.336272] bcm54xx_config_init
[   27.436308]
[   27.436308] bcm54xx_config_init
[   31.437105] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   31.443212] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[  500.090177] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f1a000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d13000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8160c42a4e104814
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x00
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=a0(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=80(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[5]
driver-bitmain.c:5051: Error of set PIC FLASH addr: addr_H=f(3) addr_L=e8(3) on Chain[5]
main.c:8961: chain[5]: [3:3] [3:3] [3:3] [3:3] [3:3] [3:3] [3:3] [3:3]
main.c:9148: chain[5] has no freq in PIC! Will use default freq=500 and jump over...
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[9] has core num=15
main.c:9113: Chain[6] ASIC[13] has core num=15
main.c:9113: Chain[6] ASIC[15] has core num=15
main.c:9113: Chain[6] ASIC[26] has core num=5
main.c:9113: Chain[6] ASIC[38] has core num=2
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=3 on chain[5], value=940
main.c:9183: get PIC voltage=6 on chain[6], value=940
main.c:9183: get PIC voltage=6 on chain[7], value=940
main.c:9349: chain[5] temp offset record: 6,6,6,6,6,6,6,6
main.c:9366: chain[5] temp chip I2C addr=0x9a
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,-4,0,0,0,0,33,0
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9349: chain[7] temp offset record: 62,-3,0,0,0,0,33,0
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:14741:  calling the get rate, writing rate:12000
main.c:13927: bmminer not found= 2151 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 8160c42a4e104814
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5640
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5640
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5640
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5640
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=e8(0) on Chain[5]
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0] [0:0]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=a0(0) on Chain[5]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
driver-btm-c5.c:1326:set_pic_iic_flash_addr_pointer: Error of set PIC FLASH addr: addr_H=f(0) addr_L=80(0) on Chain[5]
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x00
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x0f 0x4c 0x0c 0x4c 0x04 0x4c 0x0c 0x4c 0x00 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x03 0x4c 0x01 0x4c 0x01 0x4c 0x0f 0x4c 0x0f 0x4c 0x0f 0x4c 0x0f 0x4c 0x05 0x4c 0x09 0x4c 0x23 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c 0x00 0x4c
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=890
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x0f 0x43 0x0d 0x43 0x04 0x43 0x03 0x43 0x00 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x03 0x43 0x01 0x43 0x01 0x43 0x0f 0x43 0x0f 0x43 0x0f 0x43 0x0f 0x43 0x05 0x43 0x0b 0x43 0x23 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43 0x00 0x43
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=910
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=3 value=940
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=91
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=910 [57]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=57
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 0 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:4571:set_frequency: miner total rate=0GH/s ideal_total_hash_rate = 0GH/s

driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:5119:set_frequency: max freq = 100
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 0, fixed_totalRate = 0
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=332 total_tv_end_sys=333
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = -100
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 0.000000, ideal hash rate = 0
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:15630:re_open_core: re_open_core enter
driver-btm-c5.c:15791:re_open_core: Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 8, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 9, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 10, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 11, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 12, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 13, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 14, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 15, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 16, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 17, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 18, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 5, retry_count = 19, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J6] has 0 asic
driver-btm-c5.c:15791:re_open_core: Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 8, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 9, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 10, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 11, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 12, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 13, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 14, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 15, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 16, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 17, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 18, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 6, retry_count = 19, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J7] has 0 asic
driver-btm-c5.c:15791:re_open_core: Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 0, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 1, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 2, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 3, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 4, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 5, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 6, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 7, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 8, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 9, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 10, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 11, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 12, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 13, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 14, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 15, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 16, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 17, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 18, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:15795:re_open_core: i = 7, retry_count = 19, dev->chain_asic_num[i] = 0
driver-btm-c5.c:15818:re_open_core: retry Chain[J8] has 0 asic
driver-btm-c5.c:4571:set_frequency: miner total rate=0GH/s ideal_total_hash_rate = 0GH/s

driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:5119:set_frequency: max freq = 100
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 0, fixed_totalRate = 0
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:16082:re_open_core: reopen core end
driver-btm-c5.c:10400:check_system_work: re-open core 1 times
do read_temp_func once...
Done check_asic_reg
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=3

What is wrong with this machine, i have reflashed with Sd card and still no luck.

side note i am sorry if this is the wrong fourm.

Thanks guys! will send 10 USD in BTC for the first to find the soution for this miner.

please let me know if there is any more infromation you need. thanks.
Bitcoin Forum>Bitcoin>Mining>Mining support
Jump to: