s9 keep restarting bosminer after changing fans

slurfius

jr. member

Activity: 107

Merit: 7

Code:

 Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.985  INFO bosminer_hal::monitor: Kicking fans up
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.985  INFO bosminer_antminer::io: Hashboard 7: bm13xx 1.0.2 for Antminer S9 or higher built on 2020-12-04 14:30:01 UTC
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.989  INFO bosminer_hal::monitor: Monitor: Shutdown: not enough fans (0 < 1) | Starting Off Off | 0 0 0 0
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.989 ERROR bosminer_hal::monitor: Monitor task declared miner shutdown due to failure
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.989  INFO bosminer_hal::monitor: HALT reason: Shutdown: not enough fans (0 < 1)
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.989  INFO bosminer_plus_am1_s9::tune: Tune/8: starting

I put the old fans on and it works fine so I don’t think there is something wrong with the firmware. I’ve already been given a refund for the fans because they didn’t work as advertised on the s9

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

I can't find any other reason why it keeps restarting after fan replacement.
This error below is what I see

Code:

Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Caused by:
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]:     No such file or directory (os error 2)

It looks like firmware corruption.

Anyway, if the fan is running fine physically you can disable fan check ask it from their official thread here https://bitcointalk.org/index.php?topic=5036844.920

Or try to revert it back to the original firmware(Bitmain stock firmware) and test it again and put the whole kernel logs here.

There might be an issue with both yellow and blue signals and it might need to resolder the wire from the fan. It would be better if you have a multimeter to check if both signals have resistance.

slurfius

jr. member

Activity: 107

Merit: 7

Here are the logs. I'm curious why it isn't working. Seems like the specs are the same as the fans I took off then put right back on.

Code:

Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000] Virtual kernel memory layout:
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000]       .text : 0xc0008000 - 0xc07454fc   (7414 kB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000]       .init : 0xc0746000 - 0xc0788000   ( 264 kB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000]       .data : 0xc0788000 - 0xc07bb260   ( 205 kB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.000000]        .bss : 0xc07bb260 - 0xc07f2984   ( 222 kB)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] Preemptible hierarchical RCU implementation.
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] NR_IRQS:16 nr_irqs:16 16
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] slcr mapped to e0800000
Fri Feb 18 03:18:55 2022 kern.warn kernel: [    0.000000] L2C: platform modifies aux control register: 0x02060000 -> 0x32460000
Fri Feb 18 03:18:55 2022 kern.warn kernel: [    0.000000] L2C: DT/platform modifies aux control register: 0x02060000 -> 0x32460000
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] L2C-310 erratum 769419 enabled
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] L2C-310 enabling early BRESP for Cortex-A9
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46460001
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] zynq_clock_init: clkc starts at e0800100
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000000] Zynq clock init
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000010] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000035] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000135] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000164] timer #0 at e0808000, irq=17
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000424] Console: colour dummy device 80x30
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.000446] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.090306] pid_max: default: 32768 minimum: 301
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.090415] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.090429] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.090926] CPU: Testing write buffer coherency: ok
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.091129] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.091219] Setting up static identity map for 0x8280 - 0x82d8
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.260294] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.260370] Brought up 2 CPUs
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.260388] SMP: Total of 2 processors activated (2664.03 BogoMIPS).
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.260397] CPU: All CPU(s) started in SVC mode.
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.263993] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.264397] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.265289] pinctrl core: initialized pinctrl subsystem
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.266571] NET: Registered protocol family 16
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.268564] DMA: preallocated 256 KiB pool for atomic coherent allocations
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.290286] cpuidle: using governor ladder
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.320271] cpuidle: using governor menu
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.330395] zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xe0880000
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.330804] zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.391065] GPIO IRQ not connected
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.391083] XGpio: /amba_pl/gpio@41200000: registered, base is 897
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.391275] GPIO IRQ not connected
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.391288] XGpio: /amba_pl/gpio@41210000: registered, base is 884
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.392156] vgaarb: loaded
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    0.392578] SCSI subsystem initialized
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.392932] usbcore: registered new interface driver usbfs
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.393014] usbcore: registered new interface driver hub
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.393323] usbcore: registered new device driver usb
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.393751] media: Linux media interface: v0.10
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.393884] Linux video capture interface: v2.00
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.393966] pps_core: LinuxPPS API ver. 1 registered
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.393978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.394022] PTP clock support registered
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.394122] EDAC MC: Ver: 3.0.0
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.394814] Advanced Linux Sound Architecture Driver Initialized.
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.395991] clocksource: Switched to clocksource arm_global_timer
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.405105] NET: Registered protocol family 2
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.405891] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.405954] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.406071] TCP: Hash tables configured (established 4096 bind 4096)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.406133] UDP hash table entries: 256 (order: 1, 8192 bytes)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.406170] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.406405] NET: Registered protocol family 1
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.416736] RPC: Registered named UNIX socket transport module.
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.416750] RPC: Registered udp transport module.
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.416759] RPC: Registered tcp transport module.
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.416768] RPC: Registered tcp NFSv4.1 backchannel transport module.
Fri Feb 18 03:18:55 2022 kern.debug kernel: [    0.416802] PCI: CLS 0 bytes, default 64
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.417040] Trying to unpack rootfs image as initramfs...
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.417292] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.481822] Freeing initrd memory: 15028K (c7153000 - c8000000)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.483178] futex hash table entries: 512 (order: 3, 32768 bytes)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.494099] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.506526] io scheduler noop registered
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.506548] io scheduler deadline registered
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.506603] io scheduler cfq registered (default)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.508519] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.508540] dma-pl330 f8003000.dmac: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.509186] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Fri Feb 18 03:18:55 2022 kern.info kernel: [    0.510432] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 143, base_baud = 6249999) is a xuartps
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.157572] console [ttyPS0] enabled
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.161662] xdevcfg f8007000.devcfg: ioremap 0xf8007000 to e081c000
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.168359] [drm] Initialized drm 1.1.0 20060810
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.183511] brd: module loaded
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.192523] loop: module loaded
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.198543] CAN device driver interface
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.203955] libphy: MACB_mii_bus: probed
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.286153] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 145 (e6:e8:72:73:ae:7e)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.296034] macb e000b000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:01, irq=-1)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.307221] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.312964] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.323495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.329975] ehci-pci: EHCI PCI platform driver
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.334558] usbcore: registered new interface driver usb-storage
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.341933] mousedev: PS/2 mouse device common for all mice
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.347875] i2c /dev entries driver
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.354584] EDAC MC: ECC not enabled
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.358566] Xilinx Zynq CpuIdle Driver started
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.363268] sdhci: Secure Digital Host Controller Interface driver
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.369449] sdhci: Copyright(c) Pierre Ossman
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.373727] sdhci-pltfm: SDHCI platform and OF driver helper
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.380741] sdhci-arasan e0100000.sdhci: No vmmc regulator found
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.386731] sdhci-arasan e0100000.sdhci: No vqmmc regulator found
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.426039] mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using ADMA
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.438235] ledtrig-cpu: registered to indicate activity on CPUs
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.444545] usbcore: registered new interface driver usbhid
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.450085] usbhid: USB HID core driver
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.460851] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.469164] nand: Micron MT29F2G08ABAEAWP
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.473102] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Fri Feb 18 03:18:55 2022 kern.warn kernel: [    1.480673] nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.492116] Bad block table found at page 131008, version 0x01
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.498309] Bad block table found at page 130944, version 0x01
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.504361] 11 cmdlinepart partitions found on MTD device pl35x-nand
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.510653] Creating 11 MTD partitions on "pl35x-nand":
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.515839] 0x000000000000-0x000000080000 : "boot"
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.521732] 0x000000080000-0x000000300000 : "uboot"
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.527587] 0x000000300000-0x000000500000 : "fpga1"
Fri Feb 18 03:18:55 2022 kern.warn kernel: [    1.530211] mmc0: Problem switching card into high-speed mode!
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.530288] mmc0: new SDHC card at address 0001
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.543736] 0x000000500000-0x000000700000 : "fpga2"
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.548690] mmcblk0: mmc0:0001 SD16G 7.44 GiB 
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.554617]  mmcblk0: p1 p2 p3
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.559601] 0x000000700000-0x000000780000 : "uboot_env"
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.565668] 0x000000780000-0x000000800000 : "miner_cfg"
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.581773] 0x000000800000-0x000001e00000 : "recovery"
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.597969] 0x000001e00000-0x000007d00000 : "firmware1"
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.614684] 0x000007d00000-0x00000dc00000 : "firmware2"
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.631414] 0x00000dc00000-0x000010000000 : "factory"
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.647601] 0x000002000000-0x00000b000000 : "antminer_rootfs"
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.667810] nf_conntrack version 0.5.0 (7991 buckets, 31964 max)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.675544] NET: Registered protocol family 10
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.681200] sit: IPv6 over IPv4 tunneling driver
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.686548] NET: Registered protocol family 17
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.690967] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.703534] can: controller area network core (rev 20120528 abi 9)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.709740] NET: Registered protocol family 29
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.714110] can: raw protocol (rev 20120528)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.718380] can: broadcast manager protocol (rev 20120528 t)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.724005] can: netlink gateway (rev 20130117) max_hops=1
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.729684] 8021q: 802.1Q VLAN Support v1.8
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.734107] Registering SWP/SWPB emulation handler
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.740371] hctosys: unable to open rtc device (rtc0)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.749926] ALSA device list:
Fri Feb 18 03:18:55 2022 kern.info kernel: [    1.752815]   No soundcards found.
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.756654] RAMDISK: squashfs filesystem found at block 0
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    1.761985] RAMDISK: Loading 15028KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Fri Feb 18 03:18:55 2022 kern.info kernel: [    2.147105] VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
Fri Feb 18 03:18:55 2022 kern.info kernel: [    2.154314] Freeing unused kernel memory: 264K (c0746000 - c0788000)
Fri Feb 18 03:18:55 2022 user.info kernel: [    2.562983] init: Console is alive
Fri Feb 18 03:18:55 2022 user.info kernel: [    2.566525] init: - watchdog -
Fri Feb 18 03:18:55 2022 user.info kernel: [    2.925759] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Fri Feb 18 03:18:55 2022 user.info kernel: [    3.007477] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Fri Feb 18 03:18:55 2022 user.info kernel: [    3.023786] init: - preinit -
Fri Feb 18 03:18:55 2022 kern.warn kernel: [    3.383362] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Fri Feb 18 03:18:55 2022 kern.err kernel: [    3.397607] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
Fri Feb 18 03:18:55 2022 kern.info kernel: [    3.449964] EXT4-fs (mmcblk0p2): recovery complete
Fri Feb 18 03:18:55 2022 kern.info kernel: [    3.456753] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    3.518165] ubi0: attaching mtd10
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    3.522046] random: procd urandom read with 4 bits of entropy available
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    3.994093] ubi0: scanning is finished
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    4.005528] ubi0: attached mtd10 (name "antminer_rootfs", size 144 MiB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    4.012084] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    4.018937] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    4.025687] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    4.032649] ubi0: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    4.038725] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    4.045913] ubi0: max/mean erase counter: 227/109, WL threshold: 4096, image sequence number: 347537888
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    4.055336] ubi0: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    4.064611] ubi0: background thread "ubi_bgt0d" started, PID 862
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    4.096038] UBIFS (ubi0:0): recovery needed
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    5.073841] UBIFS (ubi0:0): recovery deferred
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    5.078250] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    5.086452] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    5.096341] UBIFS (ubi0:0): FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    5.107009] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
Fri Feb 18 03:18:55 2022 kern.notice kernel: [    5.112820] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 6DB0ADD6-21CD-4224-902F-9EE5F976D1A6, small LPT model
Fri Feb 18 03:18:55 2022 kern.info kernel: [    5.736774] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Fri Feb 18 03:18:55 2022 kern.info kernel: [    7.356274] macb e000b000.ethernet eth0: link up (1000/Full)
Fri Feb 18 03:18:55 2022 kern.info kernel: [    7.361872] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Fri Feb 18 03:18:55 2022 user.info kernel: [    8.916430] mount_root: rootdisk overlay filesystem has not been formatted yet
Fri Feb 18 03:18:55 2022 kern.info kernel: [    9.448442] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
Fri Feb 18 03:18:55 2022 user.info kernel: [    9.982275] block: attempting to load /etc/config/fstab
Fri Feb 18 03:18:55 2022 kern.info kernel: [   10.048463] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: 
Fri Feb 18 03:18:55 2022 user.info kernel: [   10.136174] mount_root: switched to extroot
Fri Feb 18 03:18:55 2022 user.warn kernel: [   10.142837] urandom-seed: Seeding with /etc/urandom.seed
Fri Feb 18 03:18:55 2022 user.info kernel: [   10.215646] procd: - early -
Fri Feb 18 03:18:55 2022 user.info kernel: [   10.218549] procd: - watchdog -
Fri Feb 18 03:18:55 2022 kern.info kernel: [   10.376194] macb e000b000.ethernet eth0: link down
Fri Feb 18 03:18:55 2022 user.info kernel: [   10.845219] procd: - watchdog -
Fri Feb 18 03:18:55 2022 user.info kernel: [   10.848529] procd: - ubus -
Fri Feb 18 03:18:55 2022 user.info kernel: [   11.008734] procd: - init -
Fri Feb 18 03:18:55 2022 user.info kernel: [   11.315263] kmodloader: loading kernel modules from /etc/modules.d/*
Fri Feb 18 03:18:55 2022 kern.info kernel: [   11.391876] tun: Universal TUN/TAP device driver, 1.6
Fri Feb 18 03:18:55 2022 kern.info kernel: [   11.396894] tun: (C) 1999-2004 Max Krasnyansky 
Fri Feb 18 03:18:55 2022 kern.info kernel: [   11.405958] ip6_tables: (C) 2000-2006 Netfilter Core Team
Fri Feb 18 03:18:55 2022 kern.info kernel: [   11.418417] ip_tables: (C) 2000-2006 Netfilter Core Team
Fri Feb 18 03:18:55 2022 kern.info kernel: [   11.547318] xt_time: kernel timezone is -0000
Fri Feb 18 03:18:55 2022 user.info kernel: [   11.557641] kmodloader: done loading kernel modules from /etc/modules.d/*
Fri Feb 18 03:18:56 2022 user.notice : Added device handler type: tunnel
Fri Feb 18 03:18:56 2022 user.notice : Added device handler type: Network device
Fri Feb 18 03:18:56 2022 user.notice : Added device handler type: bridge
Fri Feb 18 03:18:56 2022 user.notice : Added device handler type: macvlan
Fri Feb 18 03:18:56 2022 user.notice : Added device handler type: 8021ad
Fri Feb 18 03:18:56 2022 user.notice : Added device handler type: 8021q
Fri Feb 18 03:18:56 2022 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Fri Feb 18 03:18:56 2022 kern.info kernel: [   14.333984] device eth0 entered promiscuous mode
Fri Feb 18 03:18:56 2022 kern.info kernel: [   14.343223] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'lan' is enabled
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'lan6' is enabled
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'loopback' is enabled
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'loopback' is now up
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Network device 'lo' link is up
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'loopback' has link connectivity 
Fri Feb 18 03:18:56 2022 kern.info kernel: [   14.416381] macb e000b000.ethernet eth0: link up (1000/Full)
Fri Feb 18 03:18:56 2022 kern.info kernel: [   14.424001] br-lan: port 1(eth0) entered forwarding state
Fri Feb 18 03:18:56 2022 kern.info kernel: [   14.429398] br-lan: port 1(eth0) entered forwarding state
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Network device 'eth0' link is up
Fri Feb 18 03:18:56 2022 daemon.notice netifd: bridge 'br-lan' link is up
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'lan' has link connectivity 
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'lan' is setting up now
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'lan6' has link connectivity 
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'lan6' is setting up now
Fri Feb 18 03:18:56 2022 kern.info kernel: [   14.447195] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'lan6' is now up
Fri Feb 18 03:18:56 2022 daemon.notice netifd: lan (1412): udhcpc: started, v1.25.1
Fri Feb 18 03:18:56 2022 daemon.notice netifd: lan (1412): udhcpc: sending discover
Fri Feb 18 03:18:56 2022 daemon.err block: /dev/ram0 is already mounted on /rom
Fri Feb 18 03:18:56 2022 daemon.err block: /dev/mmcblk0p1 is already mounted on /tmp/mnt/boot
Fri Feb 18 03:18:56 2022 daemon.err block: /dev/mmcblk0p2 is already mounted on /overlay
Fri Feb 18 03:18:56 2022 daemon.notice netifd: lan (1412): udhcpc: performing DHCP renew
Fri Feb 18 03:18:56 2022 daemon.notice netifd: lan (1412): udhcpc: sending discover
Fri Feb 18 03:18:56 2022 daemon.notice netifd: lan (1412): udhcpc: sending select for 192.168.1.241
Fri Feb 18 03:18:56 2022 daemon.notice netifd: lan (1412): udhcpc: lease of 192.168.1.241 obtained, lease time 7200
Fri Feb 18 03:18:56 2022 daemon.err block: /dev/mmcblk0p1 is already mounted on /tmp/mnt/boot
Fri Feb 18 03:18:56 2022 daemon.notice netifd: Interface 'lan' is now up
Fri Feb 18 03:18:57 2022 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Feb 18 03:18:57 2022 daemon.err block: /dev/mmcblk0p2 is already mounted on /overlay
Fri Feb 18 03:18:57 2022 kern.notice kernel: [   15.400202] random: nonblocking pool is initialized
Fri Feb 18 03:18:57 2022 authpriv.info dropbear[1543]: Not backgrounding
Fri Feb 18 03:18:58 2022 kern.info kernel: [   16.426037] br-lan: port 1(eth0) entered forwarding state
Fri Feb 18 03:18:59 2022 daemon.notice procd: /etc/rc.d/S99bosminer: mv: can't rename '/etc/bosminer.toml_tmp': No such file or directory
Fri Feb 18 03:18:59 2022 daemon.info procd: - init complete -
Sat Feb 19 02:31:03 2022 daemon.info bosminer_monitor.lua[1751]: detected platform am1-s9
Sat Feb 19 02:31:03 2022 daemon.info bosminer_monitor.lua[1751]: state dead because initialization
Sat Feb 19 02:31:03 2022 daemon.info bosminer_monitor.lua[1751]: /sys/class/leds/Red LED mode on
Sat Feb 19 02:31:03 2022 daemon.info bosminer_monitor.lua[1751]: /sys/class/leds/Green LED mode off
Sat Feb 19 02:31:03 2022 daemon.info dnsmasq[1770]: started, version 2.78 cachesize 150
Sat Feb 19 02:31:03 2022 daemon.info dnsmasq[1770]: DNS service limited to local subnets
Sat Feb 19 02:31:03 2022 daemon.info dnsmasq[1770]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify
Sat Feb 19 02:31:03 2022 daemon.info dnsmasq[1770]: using local addresses only for domain lan
Sat Feb 19 02:31:03 2022 daemon.info dnsmasq[1770]: reading /tmp/resolv.conf.auto
Sat Feb 19 02:31:03 2022 daemon.info dnsmasq[1770]: using local addresses only for domain lan
Sat Feb 19 02:31:03 2022 daemon.info dnsmasq[1770]: using nameserver 192.168.1.2#53
Sat Feb 19 02:31:03 2022 daemon.info dnsmasq[1770]: using nameserver 192.168.1.2#53
Sat Feb 19 02:31:03 2022 daemon.info dnsmasq[1770]: read /etc/hosts - 4 addresses
Sat Feb 19 02:31:03 2022 daemon.info dnsmasq[1770]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Sat Feb 19 02:31:03 2022 cron.err crond[1528]: time disparity of 1392 minutes detected
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.711  INFO bosminer_plus_am1_s9: BOS management state validation result: Reading BOS management state
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: 
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Caused by:
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]:     No such file or directory (os error 2)
Sat Feb 19 02:31:04 2022 daemon.info boser[1692]: Feb 19 02:31:04.944  INFO boser::metrics_scraper: Started metrics scraper
Sat Feb 19 02:31:04 2022 daemon.info boser[1692]: Feb 19 02:31:04.947  INFO actix_server::builder: Starting 2 workers
Sat Feb 19 02:31:04 2022 daemon.info boser[1692]: Feb 19 02:31:04.956  INFO actix_server::builder: Starting "actix-web-service-0.0.0.0:80" service on 0.0.0.0:80
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.965  INFO bosminer::entry: Starting BOSminer (bosminer-plus-am1-s9 0.9.0-2499d1c2)...
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.965  INFO bosminer::entry: Configured 4 midstates
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.971  INFO bosminer_am1_s9: Resolved monitor config: Config { fan_config: Some(FanControlConfig { mode: TargetTemperature(88.0), min_fans: 1, min_fan_rpm: 0 }), temp_config: Some(TempControlConfig { dangerous_temp: 110.0, hot_temp: 95.0 }) }
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.972  INFO bosminer_antminer::fan: FAN autoconfig: [0 0 0 0]
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.974  INFO bosminer_am1_s9: Initializing miner, enabled_chains=[6, 7, 8], midstate_count=4
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.977  INFO bosminer_plus_am1_s9::api: API started for hashchain 6 on address 0.0.0.0:4086
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.977  INFO bosminer_plus_am1_s9::tune: Tune/6: starting
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.977  INFO bosminer_plus_am1_s9::tune: Tune/6: Using power limit 175 W per chain
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.977  INFO bosminer_plus_am1_s9::tune: Tune/6: starting parameters voltage: 9.10 V, freq 213.9 MHz (all chips)
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.977  INFO bosminer_plus_am1_s9::tune: Tune/6: Entering STAGE 0: restart, preheat
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.977  INFO bosminer_plus_am1_s9::tune: Tune/6: Status: starting chain
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.977  INFO bosminer_am1_s9: Registering hashboard 6 with monitor
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.979  INFO bosminer_antminer::io: Hashboard 6: bm13xx 1.0.2 for Antminer S9 or higher built on 2020-12-04 14:30:01 UTC
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.981  INFO bosminer_am1_s9::hashchain: Hashboard IP core initialized
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.981  INFO bosminer_am1_s9::power: Voltage controller reset
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.981  INFO bosminer_plus_am1_s9::api: API started for hashchain 7 on address 0.0.0.0:4087
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.981  INFO bosminer_plus_am1_s9::tune: Tune/7: starting
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.982  INFO bosminer_plus_am1_s9::tune: Tune/7: Using power limit 175 W per chain
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.982  INFO bosminer_plus_am1_s9::tune: Tune/7: starting parameters voltage: 9.10 V, freq 213.9 MHz (all chips)
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.982  INFO bosminer_plus_am1_s9::tune: Tune/7: Entering STAGE 0: restart, preheat
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.982  INFO bosminer_plus_am1_s9::tune: Tune/7: Status: starting chain
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.982  INFO bosminer_am1_s9: Registering hashboard 7 with monitor
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.985  INFO bosminer_hal::monitor: Kicking fans up
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.985  INFO bosminer_antminer::io: Hashboard 7: bm13xx 1.0.2 for Antminer S9 or higher built on 2020-12-04 14:30:01 UTC
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.989  INFO bosminer_hal::monitor: Monitor: Shutdown: not enough fans (0 < 1) | Starting Off Off | 0 0 0 0
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.989 ERROR bosminer_hal::monitor: Monitor task declared miner shutdown due to failure
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.989  INFO bosminer_hal::monitor: HALT reason: Shutdown: not enough fans (0 < 1)
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.989  INFO bosminer_plus_am1_s9::tune: Tune/8: starting
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.990  INFO bosminer_plus_am1_s9::tune: Tune/8: Using power limit 175 W per chain
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.990  INFO bosminer_plus_am1_s9::tune: Tune/8: starting parameters voltage: 9.10 V, freq 213.9 MHz (all chips)
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.990  INFO bosminer_plus_am1_s9::tune: Tune/8: Entering STAGE 0: restart, preheat
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.990  INFO bosminer_plus_am1_s9::tune: Tune/8: Status: starting chain
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.990  INFO bosminer_am1_s9: Registering hashboard 8 with monitor
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.991  INFO bosminer_am1_s9::hashchain: Hashboard IP core initialized
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.991  INFO bosminer_am1_s9::power: Voltage controller reset
Sat Feb 19 02:31:04 2022 daemon.err bosminer[1724]: Feb 19 02:31:04.992  WARN ii_linux_async_i2c: AsyncI2c reply send failed - remote side may have ended
Sat Feb 19 02:31:05 2022 daemon.err bosminer[1724]: Feb 19 02:31:05.001  INFO bosminer_antminer::io: Hashboard 8: bm13xx 1.0.2 for Antminer S9 or higher built on 2020-12-04 14:30:01 UTC
Sat Feb 19 02:31:05 2022 daemon.err bosminer[1724]: Feb 19 02:31:05.003  INFO bosminer_am1_s9::hashchain: Hashboard IP core initialized
Sat Feb 19 02:31:05 2022 daemon.err bosminer[1724]: Feb 19 02:31:05.003  INFO bosminer_am1_s9::power: Voltage controller reset
Sat Feb 19 02:31:05 2022 daemon.err bosminer[1724]: Feb 19 02:31:05.137  INFO bosminer::client::stratum_v2: Connected Stratum V1 to: stratum.slushpool.com:3333
Sat Feb 19 02:31:05 2022 daemon.err bosminer[1724]: Feb 19 02:31:05.212  INFO bosminer::client::stratum_v2: Connected Stratum V2 (authority key: u95GEReVMjK6k5YqiSFNqqTnKU4ypU2Wm8awa6tmbmDmk1bWt) to: v2.stratum.slushpool.com:3336
Sat Feb 19 02:31:07 2022 daemon.err bosminer[1724]: Feb 19 02:31:07.798  WARN ii_linux_async_i2c: AsyncI2c reply send failed - remote side may have ended
Sat Feb 19 02:31:08 2022 daemon.info bosminer_monitor.lua[1751]: turning all fans on to enhance safety
Sat Feb 19 02:31:10 2022 daemon.info dnsmasq[1770]: read /etc/hosts - 4 addresses
Sat Feb 19 02:31:10 2022 daemon.info dnsmasq[1770]: read /tmp/hosts/dhcp.cfg02411c - 1 addresses
Sat Feb 19 02:31:12 2022 daemon.err bosminer[1948]: Feb 19 02:31:12.878  INFO bosminer_plus_am1_s9: BOS management state validation result: Reading BOS management state
Sat Feb 19 02:31:12 2022 daemon.err bosminer[1948]: 
Sat Feb 19 02:31:12 2022 daemon.err bosminer[1948]: Caused by:
Sat Feb 19 02:31:12 2022 daemon.err bosminer[1948]:     No such file or directory (os error 2)

Code:

[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] slcr mapped to e0800000
[    0.000000] L2C: platform modifies aux control register: 0x02060000 -> 0x32460000
[    0.000000] L2C: DT/platform modifies aux control register: 0x02060000 -> 0x32460000
[    0.000000] L2C-310 erratum 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46460001
[    0.000000] zynq_clock_init: clkc starts at e0800100
[    0.000000] Zynq clock init
[    0.000010] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
[    0.000035] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
[    0.000135] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
[    0.000164] timer #0 at e0808000, irq=17
[    0.000424] Console: colour dummy device 80x30
[    0.000446] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090306] pid_max: default: 32768 minimum: 301
[    0.090415] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090429] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090926] CPU: Testing write buffer coherency: ok
[    0.091129] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.091219] Setting up static identity map for 0x8280 - 0x82d8
[    0.260294] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260370] Brought up 2 CPUs
[    0.260388] SMP: Total of 2 processors activated (2664.03 BogoMIPS).
[    0.260397] CPU: All CPU(s) started in SVC mode.
[    0.263993] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264397] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.265289] pinctrl core: initialized pinctrl subsystem
[    0.266571] NET: Registered protocol family 16
[    0.268564] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.290286] cpuidle: using governor ladder
[    0.320271] cpuidle: using governor menu
[    0.330395] zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xe0880000
[    0.330804] zynq-pinctrl 700.pinctrl: zynq pinctrl initialized
[    0.391065] GPIO IRQ not connected
[    0.391083] XGpio: /amba_pl/gpio@41200000: registered, base is 897
[    0.391275] GPIO IRQ not connected
[    0.391288] XGpio: /amba_pl/gpio@41210000: registered, base is 884
[    0.392156] vgaarb: loaded
[    0.392578] SCSI subsystem initialized
[    0.392932] usbcore: registered new interface driver usbfs
[    0.393014] usbcore: registered new interface driver hub
[    0.393323] usbcore: registered new device driver usb
[    0.393751] media: Linux media interface: v0.10
[    0.393884] Linux video capture interface: v2.00
[    0.393966] pps_core: LinuxPPS API ver. 1 registered
[    0.393978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.394022] PTP clock support registered
[    0.394122] EDAC MC: Ver: 3.0.0
[    0.394814] Advanced Linux Sound Architecture Driver Initialized.
[    0.395991] clocksource: Switched to clocksource arm_global_timer
[    0.405105] NET: Registered protocol family 2
[    0.405891] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.405954] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.406071] TCP: Hash tables configured (established 4096 bind 4096)
[    0.406133] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.406170] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.406405] NET: Registered protocol family 1
[    0.416736] RPC: Registered named UNIX socket transport module.
[    0.416750] RPC: Registered udp transport module.
[    0.416759] RPC: Registered tcp transport module.
[    0.416768] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.416802] PCI: CLS 0 bytes, default 64
[    0.417040] Trying to unpack rootfs image as initramfs...
[    0.417292] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
[    0.481822] Freeing initrd memory: 15028K (c7153000 - c8000000)
[    0.483178] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.494099] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.506526] io scheduler noop registered
[    0.506548] io scheduler deadline registered
[    0.506603] io scheduler cfq registered (default)
[    0.508519] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330
[    0.508540] dma-pl330 f8003000.dmac: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.509186] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.510432] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 143, base_baud = 6249999) is a xuartps
[    1.157572] console [ttyPS0] enabled
[    1.161662] xdevcfg f8007000.devcfg: ioremap 0xf8007000 to e081c000
[    1.168359] [drm] Initialized drm 1.1.0 20060810
[    1.183511] brd: module loaded
[    1.192523] loop: module loaded
[    1.198543] CAN device driver interface
[    1.203955] libphy: MACB_mii_bus: probed
[    1.286153] macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 145 (e6:e8:72:73:ae:7e)
[    1.296034] macb e000b000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:01, irq=-1)
[    1.307221] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.312964] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.323495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.329975] ehci-pci: EHCI PCI platform driver
[    1.334558] usbcore: registered new interface driver usb-storage
[    1.341933] mousedev: PS/2 mouse device common for all mice
[    1.347875] i2c /dev entries driver
[    1.354584] EDAC MC: ECC not enabled
[    1.358566] Xilinx Zynq CpuIdle Driver started
[    1.363268] sdhci: Secure Digital Host Controller Interface driver
[    1.369449] sdhci: Copyright(c) Pierre Ossman
[    1.373727] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.380741] sdhci-arasan e0100000.sdhci: No vmmc regulator found
[    1.386731] sdhci-arasan e0100000.sdhci: No vqmmc regulator found
[    1.426039] mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using ADMA
[    1.438235] ledtrig-cpu: registered to indicate activity on CPUs
[    1.444545] usbcore: registered new interface driver usbhid
[    1.450085] usbhid: USB HID core driver
[    1.460851] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.469164] nand: Micron MT29F2G08ABAEAWP
[    1.473102] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.480673] nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
[    1.492116] Bad block table found at page 131008, version 0x01
[    1.498309] Bad block table found at page 130944, version 0x01
[    1.504361] 11 cmdlinepart partitions found on MTD device pl35x-nand
[    1.510653] Creating 11 MTD partitions on "pl35x-nand":
[    1.515839] 0x000000000000-0x000000080000 : "boot"
[    1.521732] 0x000000080000-0x000000300000 : "uboot"
[    1.527587] 0x000000300000-0x000000500000 : "fpga1"
[    1.530211] mmc0: Problem switching card into high-speed mode!
[    1.530288] mmc0: new SDHC card at address 0001
[    1.543736] 0x000000500000-0x000000700000 : "fpga2"
[    1.548690] mmcblk0: mmc0:0001 SD16G 7.44 GiB 
[    1.554617]  mmcblk0: p1 p2 p3
[    1.559601] 0x000000700000-0x000000780000 : "uboot_env"
[    1.565668] 0x000000780000-0x000000800000 : "miner_cfg"
[    1.581773] 0x000000800000-0x000001e00000 : "recovery"
[    1.597969] 0x000001e00000-0x000007d00000 : "firmware1"
[    1.614684] 0x000007d00000-0x00000dc00000 : "firmware2"
[    1.631414] 0x00000dc00000-0x000010000000 : "factory"
[    1.647601] 0x000002000000-0x00000b000000 : "antminer_rootfs"
[    1.667810] nf_conntrack version 0.5.0 (7991 buckets, 31964 max)
[    1.675544] NET: Registered protocol family 10
[    1.681200] sit: IPv6 over IPv4 tunneling driver
[    1.686548] NET: Registered protocol family 17
[    1.690967] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.703534] can: controller area network core (rev 20120528 abi 9)
[    1.709740] NET: Registered protocol family 29
[    1.714110] can: raw protocol (rev 20120528)
[    1.718380] can: broadcast manager protocol (rev 20120528 t)
[    1.724005] can: netlink gateway (rev 20130117) max_hops=1
[    1.729684] 8021q: 802.1Q VLAN Support v1.8
[    1.734107] Registering SWP/SWPB emulation handler
[    1.740371] hctosys: unable to open rtc device (rtc0)
[    1.749926] ALSA device list:
[    1.752815]   No soundcards found.
[    1.756654] RAMDISK: squashfs filesystem found at block 0
[    1.761985] RAMDISK: Loading 15028KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
[    2.147105] VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
[    2.154314] Freeing unused kernel memory: 264K (c0746000 - c0788000)
[    2.562983] init: Console is alive
[    2.566525] init: - watchdog -
[    2.925759] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.007477] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.023786] init: - preinit -
[    3.383362] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    3.397607] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    3.449964] EXT4-fs (mmcblk0p2): recovery complete
[    3.456753] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.518165] ubi0: attaching mtd10
[    3.522046] random: procd urandom read with 4 bits of entropy available
[    3.994093] ubi0: scanning is finished
[    4.005528] ubi0: attached mtd10 (name "antminer_rootfs", size 144 MiB)
[    4.012084] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.018937] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.025687] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.032649] ubi0: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    4.038725] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
[    4.045913] ubi0: max/mean erase counter: 227/109, WL threshold: 4096, image sequence number: 347537888
[    4.055336] ubi0: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    4.064611] ubi0: background thread "ubi_bgt0d" started, PID 862
[    4.096038] UBIFS (ubi0:0): recovery needed
[    5.073841] UBIFS (ubi0:0): recovery deferred
[    5.078250] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
[    5.086452] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    5.096341] UBIFS (ubi0:0): FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    5.107009] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
[    5.112820] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 6DB0ADD6-21CD-4224-902F-9EE5F976D1A6, small LPT model
[    5.736774] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.356274] macb e000b000.ethernet eth0: link up (1000/Full)
[    7.361872] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.916430] mount_root: rootdisk overlay filesystem has not been formatted yet
[    9.448442] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[    9.982275] block: attempting to load /etc/config/fstab
[   10.048463] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: 
[   10.136174] mount_root: switched to extroot
[   10.142837] urandom-seed: Seeding with /etc/urandom.seed
[   10.215646] procd: - early -
[   10.218549] procd: - watchdog -
[   10.376194] macb e000b000.ethernet eth0: link down
[   10.845219] procd: - watchdog -
[   10.848529] procd: - ubus -
[   11.008734] procd: - init -
[   11.315263] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.391876] tun: Universal TUN/TAP device driver, 1.6
[   11.396894] tun: (C) 1999-2004 Max Krasnyansky 
[   11.405958] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.418417] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.547318] xt_time: kernel timezone is -0000
[   11.557641] kmodloader: done loading kernel modules from /etc/modules.d/*
[   14.333984] device eth0 entered promiscuous mode
[   14.343223] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   14.416381] macb e000b000.ethernet eth0: link up (1000/Full)
[   14.424001] br-lan: port 1(eth0) entered forwarding state
[   14.429398] br-lan: port 1(eth0) entered forwarding state
[   14.447195] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   15.400202] random: nonblocking pool is initialized
[   16.426037] br-lan: port 1(eth0) entered forwarding state

My settings were for 1 fan even though I have 2 plugged in. I think it's quieter with both fans running at lower rpm. I'm using my asics as heaters in the house, The s9s are set at 700w. When I use them in the garage I remove a fan.

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

Why don't you put both system and kernel logs here?
I would like to know how your unit scans the fan if it only shows not enough fans then your miner is not detected properly.
Without logs, we can't analyze your issue well.

Anyway check these

- Black = - 12V
- Red = + 12V
- Yellow = Spd Signal
- Blue = PWM Signal

These are wires on the fan make sure each of these wires has a signal if you have a multimeter you can check the red and black for voltage and check both yellow and blue signals if they are connected properly to the control board.

If not then you can jumper them directly from the fan to control board.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: slurfius on February 17, 2022, 07:51:16 PM

As I suspected the fans are not compatible wtf!

Shutdown: not enough fans

okay what did you set fans at 1 ,2 ,3 4

if you set to 2 fans set to 1 fan see if it works then.

slurfius

jr. member

Activity: 107

Merit: 7

As I suspected the fans are not compatible wtf!

Shutdown: not enough fans

BitMaxz

legendary

Activity: 3374

Merit: 3095

Playbet.io - Crypto Casino and Sportsbook

Why not try to reflash it again with BraiinsOS.

If you want to know the reason why it keeps restarting I suggest you to post the system and kernel logs here so that we can analyze the logs why it keeps restarting.
Don't forget to put the logs inside the code tag to your post so that we can read it and it makes your post clean.

slurfius

jr. member

Activity: 107

Merit: 7

I have had a couple s9's heating the house this winter that I wanted to freshen up so I replaced the 3 cables from the control board to the hash boards and installed new Delta QFR1212GHE fans after seeing them recommended on this forum. Now the miners constantly restart showing error bosminer is not running as they drop out. Are these fans not compatible?

Topic: s9 keep restarting bosminer after changing fans (Read 122 times)