Topic: S9 miner with low hash rate question/help (Read 252 times)

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000309] ps7-ttc #0 at f0006000, irq=43
[    0.000618] Console: colour dummy device 80x30
[    0.000655] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040211] pid_max: default: 32768 minimum: 301
[    0.040437] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040459] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042577] CPU: Testing write buffer coherency: ok
[    0.042924] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042986] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043210] L310 cache controller enabled
[    0.043230] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121042] CPU1: Booted secondary processor
[    0.210230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210360] Brought up 2 CPUs
[    0.210379] SMP: Total of 2 processors activated.
[    0.210388] CPU: All CPU(s) started in SVC mode.
[    0.211052] devtmpfs: initialized
[    0.213460] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214667] regulator-dummy: no parameters
[    0.221923] NET: Registered protocol family 16
[    0.224216] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226493] cpuidle: using governor ladder
[    0.226506] cpuidle: using governor menu
[    0.233929] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235449] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235462] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235569] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.257590] bio: create slab  at 0
[    0.258997] vgaarb: loaded
[    0.259701] SCSI subsystem initialized
[    0.261314] usbcore: registered new interface driver usbfs
[    0.261492] usbcore: registered new interface driver hub
[    0.261715] usbcore: registered new device driver usb
[    0.262249] media: Linux media interface: v0.10
[    0.262404] Linux video capture interface: v2.00
[    0.262644] pps_core: LinuxPPS API ver. 1 registered
[    0.262656] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.262779] PTP clock support registered
[    0.263130] EDAC MC: Ver: 3.0.0
[    0.264169] Advanced Linux Sound Architecture Driver Initialized.
[    0.266999] DMA-API: preallocated 4096 debug entries
[    0.267013] DMA-API: debugging enabled by kernel config
[    0.267090] Switched to clocksource arm_global_timer
[    0.287267] NET: Registered protocol family 2
[    0.288207] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.288303] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.288463] TCP: Hash tables configured (established 8192 bind 8192)
[    0.288525] TCP: reno registered
[    0.288543] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.288595] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288856] NET: Registered protocol family 1
[    0.289292] RPC: Registered named UNIX socket transport module.
[    0.289305] RPC: Registered udp transport module.
[    0.289314] RPC: Registered tcp transport module.
[    0.289322] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.289335] PCI: CLS 0 bytes, default 64
[    0.289775] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291792] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293199] bounce pool size: 64 pages
[    0.294085] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.294284] msgmni has been set to 1486
[    0.295050] io scheduler noop registered
[    0.295063] io scheduler deadline registered
[    0.295105] io scheduler cfq registered (default)
[    0.308810] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.308829] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.431603] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.003708] console [ttyPS0] enabled
[    1.008011] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.015618] [drm] Initialized drm 1.1.0 20060810
[    1.032687] brd: module loaded
[    1.042123] loop: module loaded
[    1.051623] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.057398] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.065167] libphy: XEMACPS mii bus: probed
[    1.069567] ------------- phy_id = 0x3625e62
[    1.074286] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.082973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.089774] ehci-pci: EHCI PCI platform driver
[    1.096993] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.103829] usbcore: registered new interface driver usb-storage
[    1.110704] mousedev: PS/2 mouse device common for all mice
[    1.116782] i2c /dev entries driver
[    1.123731] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.129256] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.135131] Xilinx Zynq CpuIdle Driver started
[    1.140010] sdhci: Secure Digital Host Controller Interface driver
[    1.146107] sdhci: Copyright(c) Pierre Ossman
[    1.150534] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.157306] mmc0: no vqmmc regulator found
[    1.161318] mmc0: no vmmc regulator found
[    1.197120] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205789] usbcore: registered new interface driver usbhid
[    1.211303] usbhid: USB HID core driver
[    1.216014] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222310] nand: Micron MT29F2G08ABAEAWP
[    1.226279] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232221] Bad block table found at page 131008, version 0x01
[    1.238445] Bad block table found at page 130944, version 0x01
[    1.244494] 3 ofpart partitions found on MTD device pl353-nand
[    1.250278] Creating 3 MTD partitions on "pl353-nand":
[    1.255375] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263414] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270733] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279654] TCP: cubic registered
[    1.282891] NET: Registered protocol family 17
[    1.287615] Registering SWP/SWPB emulation handler
[    1.293543] regulator-dummy: disabling
[    1.297893] UBI: attaching mtd1 to ubi0
[    1.824924] UBI: scanning is finished
[    1.836577] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.843662] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.850424] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.857109] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.863945] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.869947] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.877054] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1134783803
[    1.886097] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.895313] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.895319] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.899276] ALSA device list:
[    1.899280]   No soundcards found.
[    1.915673] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.944875] UBIFS: recovery needed
[    2.045366] UBIFS: recovery completed
[    2.049066] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.054986] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.064119] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.074004] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.079045] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[    2.090340] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.097526] devtmpfs: mounted
[    2.100627] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.946942] random: dd urandom read with 0 bits of entropy available
[    3.337129] 
[    3.337129] bcm54xx_config_init
[    3.947122] 
[    3.947122] bcm54xx_config_init
[    6.947970] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    6.954056] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   20.175943] In axi fpga driver!
[   20.179053] request_mem_region OK!
[   20.182407] AXI fpga dev virtual address is 0xf01fe000
[   20.187555] *base_vir_addr = 0x8c510
[   20.203284] In fpga mem driver!
[   20.206349] request_mem_region OK!
[   20.209968] fpga mem virtual address is 0xf3000000
[   21.006507] 
[   21.006507] bcm54xx_config_init
[   21.636445] 
[   21.636445] bcm54xx_config_init
[   24.636999] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   24.643021] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  407.951311] random: nonblocking pool is initialized
This is XILINX board. Totalram:       1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 81100d4162b58854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:22] [63:5] [63:24] [63:35] [63:35] [63:25] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[44] has core num=1
Chain[5] ASIC[46] has core num=12
Chain[5] ASIC[50] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:34] [63:2] [63:64] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[11] has core num=3
Chain[6] ASIC[15] has core num=2
Chain[6] ASIC[50] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:35] [63:3] [63:85] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[14] has core num=10
Chain[7] ASIC[49] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=74 on chain[5], value=900
get PIC voltage=6 on chain[6], value=940
get PIC voltage=74 on chain[7], value=900
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1374 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 1799 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81100d4162b58854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[5] speed=6000
get fan[2] speed=4200
get fan[5] speed=6000
get fan[2] speed=4200
get fan[5] speed=6000
chain[5]: [63:22] [63:5] [63:24] [63:35] [63:35] [63:25] [63:255] [63:255]
Chain[J6] has backup chain_voltage=900
Chain[J6] test patten OK temp=-114
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:34] [63:2] [63:64] [63:255] [63:255]
Chain[J7] has backup chain_voltage=900
Chain[J7] test patten OK temp=-118
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:35] [63:3] [63:85] [63:255] [63:255]
Chain[J8] has backup chain_voltage=900
Chain[J8] test patten OK temp=-119
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=74 value=900
Chain[J7] orignal chain_voltage_pic=74 value=900
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=900 [74]
Chain[J8] get working chain_voltage_pic=74
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[44] has core num=1
Chain[J6] ASIC[46] has core num=12
Chain[J6] ASIC[50] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[11] has core num=3
Chain[J7] ASIC[15] has core num=2
Chain[J7] ASIC[50] has core num=1
miner total rate=9332GH/s fixed rate=9000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
Chain:5 temp offset=0
Chain:5 base freq=693
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656 
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656 
Chain:5 max freq=656
Chain:5 min freq=650

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:631 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 
Asic[17]:631 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:656 Asic[50]:631 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656 
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656 
Chain:6 max freq=656
Chain:6 min freq=631


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
Chain:5 temp offset=0
Chain:5 base freq=693
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656 
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656 
Chain:5 max freq=656
Chain:5 min freq=650

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.1V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:631 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 
Asic[17]:631 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:656 Asic[50]:631 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656 
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656 
Chain:6 max freq=656
Chain:6 min freq=631

max freq = 656
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:23 remote:24 offset:28 
Chain[J6] chip[244] get middle temp offset=28 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:20 remote:22 offset:27 
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J6] set working voltage=900 [74]
Chain[J7] set working voltage=900 [74]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=910	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=911	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[44]=910
core[070]=6	

asic[56]=911
core[113]=7	



freq[00]=650	freq[01]=650	freq[02]=650	freq[03]=650	freq[04]=650	freq[05]=650	freq[06]=650	freq[07]=650	
freq[08]=650	freq[09]=650	freq[10]=650	freq[11]=650	freq[12]=650	freq[13]=650	freq[14]=650	freq[15]=650	
freq[16]=650	freq[17]=650	freq[18]=650	freq[19]=650	freq[20]=650	freq[21]=650	freq[22]=650	freq[23]=650	
freq[24]=650	freq[25]=650	freq[26]=650	freq[27]=650	freq[28]=650	freq[29]=650	freq[30]=650	freq[31]=650	
freq[32]=650	freq[33]=650	freq[34]=650	freq[35]=650	freq[36]=650	freq[37]=650	freq[38]=650	freq[39]=650	
freq[40]=650	freq[41]=650	freq[42]=650	freq[43]=650	freq[44]=650	freq[45]=650	freq[46]=650	freq[47]=650	
freq[48]=650	freq[49]=650	freq[50]=650	freq[51]=650	freq[52]=650	freq[53]=656	freq[54]=656	freq[55]=656	
freq[56]=656	freq[57]=656	freq[58]=656	freq[59]=656	freq[60]=656	freq[61]=656	freq[62]=656	

total valid nonce number:57453
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26679
last_nonce_num:33863
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=910	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=896	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=911	asic[43]=909	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=900	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=911	
asic[56]=832	asic[57]=912	asic[58]=909	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[11]=910
core[001]=6	

asic[15]=896
core[112]=0	core[113]=0	

asic[42]=911
core[086]=7	

asic[43]=909
core[058]=7	core[060]=6	

asic[50]=900
core[004]=6	core[006]=6	core[013]=6	core[038]=5	core[055]=6	core[058]=7	

asic[55]=911
core[009]=7	

asic[56]=832
core[104]=0	core[105]=0	core[106]=0	core[107]=0	core[108]=0	core[109]=0	core[110]=0	core[111]=0	core[112]=0	core[113]=0	

asic[58]=909
core[056]=6	core[110]=7	



freq[00]=650	freq[01]=650	freq[02]=650	freq[03]=650	freq[04]=650	freq[05]=650	freq[06]=650	freq[07]=650	
freq[08]=650	freq[09]=650	freq[10]=650	freq[11]=631	freq[12]=650	freq[13]=650	freq[14]=650	freq[15]=650	
freq[16]=650	freq[17]=631	freq[18]=650	freq[19]=650	freq[20]=650	freq[21]=650	freq[22]=650	freq[23]=650	
freq[24]=650	freq[25]=650	freq[26]=650	freq[27]=650	freq[28]=650	freq[29]=650	freq[30]=650	freq[31]=650	
freq[32]=650	freq[33]=650	freq[34]=650	freq[35]=650	freq[36]=650	freq[37]=650	freq[38]=650	freq[39]=650	
freq[40]=650	freq[41]=650	freq[42]=650	freq[43]=650	freq[44]=650	freq[45]=650	freq[46]=650	freq[47]=650	
freq[48]=650	freq[49]=656	freq[50]=631	freq[51]=656	freq[52]=656	freq[53]=656	freq[54]=656	freq[55]=656	
freq[56]=656	freq[57]=656	freq[58]=656	freq[59]=656	freq[60]=656	freq[61]=656	freq[62]=656	

total valid nonce number:57338
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26582
last_nonce_num:29029
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: FAILED!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[6]...
Done open core on Chain[6]!
start send works on chain[5]
start send works on chain[6]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=912	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=912	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!



freq[00]=650	freq[01]=650	freq[02]=650	freq[03]=650	freq[04]=650	freq[05]=650	freq[06]=650	freq[07]=650	
freq[08]=650	freq[09]=650	freq[10]=650	freq[11]=650	freq[12]=650	freq[13]=650	freq[14]=650	freq[15]=650	
freq[16]=650	freq[17]=650	freq[18]=650	freq[19]=650	freq[20]=650	freq[21]=650	freq[22]=650	freq[23]=650	
freq[24]=650	freq[25]=650	freq[26]=650	freq[27]=650	freq[28]=650	freq[29]=650	freq[30]=650	freq[31]=650	
freq[32]=650	freq[33]=650	freq[34]=650	freq[35]=650	freq[36]=650	freq[37]=650	freq[38]=650	freq[39]=650	
freq[40]=650	freq[41]=650	freq[42]=650	freq[43]=650	freq[44]=650	freq[45]=650	freq[46]=650	freq[47]=650	
freq[48]=650	freq[49]=650	freq[50]=650	freq[51]=650	freq[52]=650	freq[53]=656	freq[54]=656	freq[55]=656	
freq[56]=656	freq[57]=656	freq[58]=656	freq[59]=656	freq[60]=656	freq[61]=656	freq[62]=656	

total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26688
last_nonce_num:29739
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912	asic[01]=912	asic[02]=912	asic[03]=912	asic[04]=912	asic[05]=912	asic[06]=912	asic[07]=912	
asic[08]=912	asic[09]=912	asic[10]=912	asic[11]=912	asic[12]=912	asic[13]=912	asic[14]=912	asic[15]=896	
asic[16]=912	asic[17]=912	asic[18]=912	asic[19]=912	asic[20]=912	asic[21]=912	asic[22]=912	asic[23]=912	
asic[24]=912	asic[25]=912	asic[26]=912	asic[27]=912	asic[28]=912	asic[29]=912	asic[30]=912	asic[31]=912	
asic[32]=912	asic[33]=912	asic[34]=912	asic[35]=912	asic[36]=912	asic[37]=912	asic[38]=912	asic[39]=912	
asic[40]=912	asic[41]=912	asic[42]=912	asic[43]=912	asic[44]=912	asic[45]=912	asic[46]=912	asic[47]=912	
asic[48]=912	asic[49]=912	asic[50]=912	asic[51]=912	asic[52]=912	asic[53]=912	asic[54]=912	asic[55]=912	
asic[56]=832	asic[57]=912	asic[58]=912	asic[59]=912	asic[60]=912	asic[61]=912	asic[62]=912	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[15]=896
core[112]=0	core[113]=0	

asic[56]=832
core[104]=0	core[105]=0	core[106]=0	core[107]=0	core[108]=0	core[109]=0	core[110]=0	core[111]=0	core[112]=0	core[113]=0	



freq[00]=650	freq[01]=650	freq[02]=650	freq[03]=650	freq[04]=650	freq[05]=650	freq[06]=650	freq[07]=650	
freq[08]=650	freq[09]=650	freq[10]=650	freq[11]=631	freq[12]=650	freq[13]=650	freq[14]=650	freq[15]=650	
freq[16]=650	freq[17]=631	freq[18]=650	freq[19]=650	freq[20]=650	freq[21]=650	freq[22]=650	freq[23]=650	
freq[24]=650	freq[25]=650	freq[26]=650	freq[27]=650	freq[28]=650	freq[29]=650	freq[30]=650	freq[31]=650	
freq[32]=650	freq[33]=650	freq[34]=650	freq[35]=650	freq[36]=650	freq[37]=650	freq[38]=650	freq[39]=650	
freq[40]=650	freq[41]=650	freq[42]=650	freq[43]=650	freq[44]=650	freq[45]=650	freq[46]=650	freq[47]=650	
freq[48]=650	freq[49]=656	freq[50]=631	freq[51]=656	freq[52]=656	freq[53]=656	freq[54]=656	freq[55]=656	
freq[56]=656	freq[57]=656	freq[58]=656	freq[59]=656	freq[60]=656	freq[61]=656	freq[62]=656	

total valid nonce number:57360
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26598
last_nonce_num:9789
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
setStartTimePoint total_tv_start_sys=390 total_tv_end_sys=391
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=72.5950 Asic[02]=72.0910 Asic[03]=69.2730 Asic[04]=73.8860 Asic[05]=79.4560 Asic[06]=76.8060 Asic[07]=77.9970 Asic[08]=80.6640 
Asic[09]=74.6580 Asic[10]=72.3090 Asic[11]=73.6510 Asic[12]=75.6820 Asic[13]=76.3530 Asic[14]=71.8400 Asic[15]=72.4440 Asic[16]=74.4400 
Asic[17]=76.4530 Asic[18]=78.2480 Asic[19]=72.0580 Asic[20]=74.1210 Asic[21]=77.4930 Asic[22]=76.2690 Asic[23]=69.9770 Asic[24]=70.4810 
Asic[25]=67.7630 Asic[26]=73.9530 Asic[27]=76.5370 Asic[28]=79.3890 Asic[29]=71.8400 Asic[30]=74.8930 Asic[31]=78.6340 Asic[32]=68.7860 
Asic[33]=75.2450 Asic[34]=71.9910 Asic[35]=75.6140 Asic[36]=71.9740 Asic[37]=76.1680 Asic[38]=70.6650 Asic[39]=79.4400 Asic[40]=75.6310 
Asic[41]=80.2110 Asic[42]=76.1350 Asic[43]=75.8830 Asic[44]=75.6650 Asic[45]=72.4770 Asic[46]=72.7620 Asic[47]=80.1780 Asic[48]=75.2120 
Asic[49]=78.0970 Asic[50]=70.9670 Asic[51]=75.4130 Asic[52]=77.3930 Asic[53]=72.6620 Asic[54]=75.8330 Asic[55]=70.1280 Asic[56]=69.3570 
Asic[57]=70.9840 Asic[58]=73.6680 Asic[59]=76.2690 Asic[60]=69.1220 Asic[61]=75.4630 Asic[62]=78.9870 Asic[63]=67.0410 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=74.2050 Asic[02]=71.5040 Asic[03]=72.3600 Asic[04]=70.5310 Asic[05]=72.1420 Asic[06]=69.8600 Asic[07]=75.6310 Asic[08]=71.2190 
Asic[09]=74.2390 Asic[10]=71.3030 Asic[11]=75.6480 Asic[12]=71.9400 Asic[13]=75.3960 Asic[14]=80.0270 Asic[15]=71.0170 Asic[16]=73.3330 
Asic[17]=76.1350 Asic[18]=73.4170 Asic[19]=71.6550 Asic[20]=75.1450 Asic[21]=75.5980 Asic[22]=75.9330 Asic[23]=72.6280 Asic[24]=71.9570 
Asic[25]=73.4840 Asic[26]=73.9030 Asic[27]=73.9200 Asic[28]=73.9700 Asic[29]=71.7720 Asic[30]=71.6210 Asic[31]=71.6050 Asic[32]=70.9340 
Asic[33]=79.0200 Asic[34]=72.1920 Asic[35]=75.4470 Asic[36]=70.1790 Asic[37]=74.3730 Asic[38]=76.2520 Asic[39]=74.2050 Asic[40]=70.9670 
Asic[41]=78.9200 Asic[42]=77.5440 Asic[43]=70.6990 Asic[44]=74.8760 Asic[45]=76.2520 Asic[46]=77.1750 Asic[47]=76.0670 Asic[48]=75.6980 
Asic[49]=75.2450 Asic[50]=75.9840 Asic[51]=71.7560 Asic[52]=77.4770 Asic[53]=73.0980 Asic[54]=86.1670 Asic[55]=73.8700 Asic[56]=75.0100 
Asic[57]=67.7460 Asic[58]=79.0540 Asic[59]=74.4900 Asic[60]=75.0780 Asic[61]=70.6820 Asic[62]=75.4130 Asic[63]=72.3760 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=28
Chain[5] Chip[62] local Temp=56
Chain[5] Chip[62] middle Temp=68
Special fix Chain[5] Chip[62] middle Temp = 71
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=50
Chain[6] Chip[62] middle Temp=63
Special fix Chain[6] Chip[62] middle Temp = 65
Done read temp on Chain[6]
set FAN speed according to: temp_highest=56 temp_top1[PWM_T]=56 temp_top1[TEMP_POS_LOCAL]=56 temp_change=-1 fix_fan_steps=0
FAN PWM: 64
read_temp_func Done!
CRC error counter=0

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000303] ps7-ttc #0 at f0006000, irq=43
[    0.000614] Console: colour dummy device 80x30
[    0.000652] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040205] pid_max: default: 32768 minimum: 301
[    0.040425] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040447] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042566] CPU: Testing write buffer coherency: ok
[    0.042916] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042976] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043199] L310 cache controller enabled
[    0.043219] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121033] CPU1: Booted secondary processor
[    0.210225] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210355] Brought up 2 CPUs
[    0.210374] SMP: Total of 2 processors activated.
[    0.210383] CPU: All CPU(s) started in SVC mode.
[    0.211034] devtmpfs: initialized
[    0.213436] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214645] regulator-dummy: no parameters
[    0.221910] NET: Registered protocol family 16
[    0.224150] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226437] cpuidle: using governor ladder
[    0.226451] cpuidle: using governor menu
[    0.233875] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235390] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235404] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235520] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.257240] bio: create slab  at 0
[    0.258664] vgaarb: loaded
[    0.259371] SCSI subsystem initialized
[    0.260904] usbcore: registered new interface driver usbfs
[    0.261385] usbcore: registered new interface driver hub
[    0.261624] usbcore: registered new device driver usb
[    0.262159] media: Linux media interface: v0.10
[    0.262324] Linux video capture interface: v2.00
[    0.262561] pps_core: LinuxPPS API ver. 1 registered
[    0.262573] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.262696] PTP clock support registered
[    0.263052] EDAC MC: Ver: 3.0.0
[    0.264086] Advanced Linux Sound Architecture Driver Initialized.
[    0.266907] DMA-API: preallocated 4096 debug entries
[    0.266922] DMA-API: debugging enabled by kernel config
[    0.266994] Switched to clocksource arm_global_timer
[    0.286819] NET: Registered protocol family 2
[    0.287534] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.287630] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.287788] TCP: Hash tables configured (established 8192 bind 8192)
[    0.287856] TCP: reno registered
[    0.287874] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.287927] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288178] NET: Registered protocol family 1
[    0.288541] RPC: Registered named UNIX socket transport module.
[    0.288554] RPC: Registered udp transport module.
[    0.288562] RPC: Registered tcp transport module.
[    0.288571] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288584] PCI: CLS 0 bytes, default 64
[    0.289020] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291068] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292471] bounce pool size: 64 pages
[    0.293362] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293561] msgmni has been set to 1486
[    0.294341] io scheduler noop registered
[    0.294355] io scheduler deadline registered
[    0.294397] io scheduler cfq registered (default)
[    0.307236] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.307256] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.430535] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.003451] console [ttyPS0] enabled
[    1.007736] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.015347] [drm] Initialized drm 1.1.0 20060810
[    1.032433] brd: module loaded
[    1.041795] loop: module loaded
[    1.051399] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.057255] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.065013] libphy: XEMACPS mii bus: probed
[    1.069419] ------------- phy_id = 0x3625e62
[    1.074140] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.082921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.089574] ehci-pci: EHCI PCI platform driver
[    1.096781] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.103852] usbcore: registered new interface driver usb-storage
[    1.110759] mousedev: PS/2 mouse device common for all mice
[    1.116859] i2c /dev entries driver
[    1.123808] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.129373] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.135240] Xilinx Zynq CpuIdle Driver started
[    1.140110] sdhci: Secure Digital Host Controller Interface driver
[    1.146201] sdhci: Copyright(c) Pierre Ossman
[    1.150612] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.157367] mmc0: no vqmmc regulator found
[    1.161378] mmc0: no vmmc regulator found
[    1.197012] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205695] usbcore: registered new interface driver usbhid
[    1.211204] usbhid: USB HID core driver
[    1.215929] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222227] nand: Micron MT29F2G08ABAEAWP
[    1.226191] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232135] Bad block table found at page 131008, version 0x01
[    1.238361] Bad block table found at page 130944, version 0x01
[    1.244410] 3 ofpart partitions found on MTD device pl353-nand
[    1.250196] Creating 3 MTD partitions on "pl353-nand":
[    1.255282] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263327] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270648] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279582] TCP: cubic registered
[    1.282821] NET: Registered protocol family 17
[    1.287534] Registering SWP/SWPB emulation handler
[    1.293432] regulator-dummy: disabling
[    1.297793] UBI: attaching mtd1 to ubi0
[    1.824812] UBI: scanning is finished
[    1.836510] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.843593] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.850355] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.857038] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.863875] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.869876] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.876983] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1134783803
[    1.886026] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.895243] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.895248] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.899189] ALSA device list:
[    1.899192]   No soundcards found.
[    1.915608] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.944626] UBIFS: recovery needed
[    2.041222] UBIFS: recovery completed
[    2.044887] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.050868] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.059944] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.069830] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.074859] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[    2.086156] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.093347] devtmpfs: mounted
[    2.096454] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.936617] random: dd urandom read with 0 bits of entropy available
[    3.327040] 
[    3.327040] bcm54xx_config_init
[    3.937028] 
[    3.937028] bcm54xx_config_init
[    6.937880] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    6.943968] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   20.413257] In axi fpga driver!
[   20.416323] request_mem_region OK!
[   20.419756] AXI fpga dev virtual address is 0xf01fe000
[   20.424822] *base_vir_addr = 0x8c510
[   20.440465] In fpga mem driver!
[   20.443536] request_mem_region OK!
[   20.447134] fpga mem virtual address is 0xf3000000
[   21.256414] 
[   21.256414] bcm54xx_config_init
[   21.886362] 
[   21.886362] bcm54xx_config_init
[   24.886906] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   24.892924] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  407.506579] random: nonblocking pool is initialized
This is XILINX board. Totalram:       1039794176
Detect 1GB control board of XILINX
DETECT HW version=0008c510
miner ID : 81100d4162b58854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:22] [63:5] [63:24] [63:35] [63:35] [63:25] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[44] has core num=1
Chain[5] ASIC[46] has core num=12
Chain[5] ASIC[50] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:34] [63:2] [63:64] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[11] has core num=3
Chain[6] ASIC[15] has core num=2
Chain[6] ASIC[50] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:35] [63:3] [63:85] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[14] has core num=10
Chain[7] ASIC[49] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=74 on chain[5], value=900
get PIC voltage=74 on chain[6], value=900
get PIC voltage=74 on chain[7], value=900
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1375 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 2155 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81100d4162b58854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[2] speed=4200
get fan[5] speed=6000
get fan[2] speed=4200
get fan[5] speed=6000
get fan[2] speed=4200
get fan[5] speed=6000
chain[5]: [63:22] [63:5] [63:24] [63:35] [63:35] [63:25] [63:255] [63:255]
Chain[J6] has backup chain_voltage=900
Chain[J6] test patten OK temp=-114
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:34] [63:2] [63:64] [63:255] [63:255]
Chain[J7] has backup chain_voltage=900
Chain[J7] test patten OK temp=-118
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:35] [63:3] [63:85] [63:255] [63:255]
Chain[J8] has backup chain_voltage=900
Chain[J8] test patten OK temp=-119
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=74 value=900
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=900 [74]
Chain[J7] get working chain_voltage_pic=74
Chain[J8] orignal chain_voltage_pic=74 value=900
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 103 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 103 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 103 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 103 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 102 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 102 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[44] has core num=1
Chain[J6] ASIC[46] has core num=12
Chain[J6] ASIC[50] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[14] has core num=10
Chain[J8] ASIC[49] has core num=1
miner total rate=9332GH/s fixed rate=9000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
Chain:5 temp offset=0
Chain:5 base freq=693
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656 
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656 
Chain:5 max freq=656
Chain:5 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=102
Chain[J8] voltage added=0.1V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:631 Asic[15]:650 Asic[16]:650 
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:656 Asic[47]:656 Asic[48]:656 
Asic[49]:631 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:643 Asic[55]:656 Asic[56]:656 
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656 Asic[63]:200 Asic[64]:200 
Asic[65]:200 Asic[66]:200 Asic[67]:200 Asic[68]:200 Asic[69]:200 Asic[70]:200 Asic[71]:200 Asic[72]:200 
Asic[73]:200 Asic[74]:200 Asic[75]:200 Asic[76]:200 Asic[77]:200 Asic[78]:200 Asic[79]:200 Asic[80]:200 
Asic[81]:200 Asic[82]:200 Asic[83]:200 Asic[84]:200 Asic[85]:200 Asic[86]:200 Asic[87]:200 Asic[88]:200 
Asic[89]:200 Asic[90]:200 Asic[91]:200 Asic[92]:200 Asic[93]:200 Asic[94]:200 Asic[95]:200 Asic[96]:200 
Asic[97]:200 Asic[98]:200 Asic[99]:200 Asic[100]:200 Asic[101]:200 
Chain:7 max freq=656
Chain:7 min freq=200


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.1V
Chain:5 temp offset=0
Chain:5 base freq=693
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656 
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656 
Chain:5 max freq=656
Chain:5 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=102
Chain[J8] voltage added=0.1V
Chain:7 temp offset=0
Chain:7 base freq=631
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:631 Asic[15]:650 Asic[16]:650 
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:656 Asic[47]:656 Asic[48]:656 
Asic[49]:631 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:643 Asic[55]:656 Asic[56]:656 
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656 Asic[63]:200 Asic[64]:200 
Asic[65]:200 Asic[66]:200 Asic[67]:200 Asic[68]:200 Asic[69]:200 Asic[70]:200 Asic[71]:200 Asic[72]:200 
Asic[73]:200 Asic[74]:200 Asic[75]:200 Asic[76]:200 Asic[77]:200 Asic[78]:200 Asic[79]:200 Asic[80]:200 
Asic[81]:200 Asic[82]:200 Asic[83]:200 Asic[84]:200 Asic[85]:200 Asic[86]:200 Asic[87]:200 Asic[88]:200 
Asic[89]:200 Asic[90]:200 Asic[91]:200 Asic[92]:200 Asic[93]:200 Asic[94]:200 Asic[95]:200 Asic[96]:200 
Asic[97]:200 Asic[98]:200 Asic[99]:200 Asic[100]:200 Asic[101]:200 
Chain:7 max freq=656
Chain:7 min freq=200

max freq = 656
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Chain[J6] use default temp chip[244] 
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x98)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9A)
Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9C)
Warning: Chain[5] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27
New offset Chain[5] chip[244] local:-64 remote:0 offset:27 
Chain[J6] chip[244] get middle temp offset=27 typeID=00
Chain[J6] set working voltage=900 [74]
Chain[J8] set working voltage=900 [74]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[7]
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=00	asic[01]=00	asic[02]=00	asic[03]=00	asic[04]=00	asic[05]=00	asic[06]=00	asic[07]=00	
asic[08]=00	asic[09]=00	asic[10]=00	asic[11]=00	asic[12]=00	asic[13]=00	asic[14]=00	asic[15]=00	
asic[16]=00	asic[17]=00	asic[18]=00	asic[19]=00	asic[20]=00	asic[21]=00	asic[22]=00	asic[23]=00	
asic[24]=00	asic[25]=00	asic[26]=00	asic[27]=00	asic[28]=00	asic[29]=00	asic[30]=00	asic[31]=00	
asic[32]=00	asic[33]=00	asic[34]=00	asic[35]=00	asic[36]=00	asic[37]=00	asic[38]=00	asic[39]=00	
asic[40]=00	asic[41]=00	asic[42]=00	asic[43]=00	asic[44]=00	asic[45]=00	asic[46]=00	asic[47]=00	
asic[48]=00	asic[49]=00	asic[50]=00	asic[51]=00	asic[52]=00	asic[53]=00	asic[54]=00	asic[55]=00	
asic[56]=00	asic[57]=00	asic[58]=00	asic[59]=00	asic[60]=00	asic[61]=00	asic[62]=00	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=00
core[000]=0	core[001]=0	core[002]=0	core[003]=0	core[004]=0	core[005]=0	core[006]=0	core[007]=0	core[008]=0	core[009]=0	core[010]=0	core[011]=0	core[012]=0	core[013]=0	core[014]=0	core[015]=0	core[016]=0	core[017]=0	core[018]=0	core[019]=0	core[020]=0	core[021]=0	core[022]=0	core[023]=0	core[024]=0	core[025]=0	core[026]=0	core[027]=0	core[028]=0	core[029]=0	core[030]=0	core[031]=0	core[032]=0	core[033]=0	core[034]=0	core[035]=0	core[036]=0	core[037]=0	core[038]=0	core[039]=0	core[040]=0	core[041]=0	core[042]=0	core[043]=0	core[044]=0	core[045]=0	core[046]=0	core[047]=0	core[048]=0	core[049]=0	core[050]=0	core[051]=0	core[052]=0	core[053]=0	core[054]=0	core[055]=0	core[056]=0	core[057]=0	core[058]=0	core[059]=0	core[060]=0	core[061]=0	core[062]=0	core[063]=0	core[064]=0	core[065]=0	core[066]=0	core[067]=0	core[068]=0	core[069]=0	core[070]=0	core[071]=0	core[072]=0	core[073]=0	core[074]=0	core[075]=0	core[076]=0	core[077]=0	core[078]=0	core[079]=0	core[080]=0	core[081]=0	core[082]=0	core[083]=0	core[084]=0	core[085]=0	core[086]=0	core[087]=0	core[088]=0	core[089]=0	core[090]=0	core[091]=0	core[092]=0	core[093]=0	core[094]=0	core[095]=0	core[096]=0	core[097]=0	core[098]=0	core[099]=0	core[100]=0	core[101]=0	core[102]=0	core[103]=0	core[104]=0	core[105]=0	core[106]=0	core[107]=0	core[108]=0	core[109]=0	core[110]=0	core[111]=0	core[112]=0	core[113]=0	

asic[03]=00
core[000]=0	core[001]=0	core[002]=0	core[003]=0	core[004]=0	core[005]=0	core[006]=0	core[007]=0	core[008]=0	core[009]=0	core[010]=0	core[011]=0	core[012]=0	core[013]=0	core[014]=0	core[015]=0	core[016]=0	core[017]=0	core[018]=0	core[019]=0	core[020]=0	core[021]=0	core[022]=0	core[023]=0	core[024]=0	core[025]=0	core[026]=0	core[027]=0	core[028]=0	core[029]=0	core[030]=0	core[031]=0	core[032]=0	core[033]=0	core[034]=0	core[035]=0	core[036]=0	core[037]=0	core[038]=0	core[039]=0	core[040]=0	core[041]=0	core[042]=0	core[043]=0	core[044]=0	core[045]=0	core[046]=0	core[047]=0	core[048]=0	core[049]=0	core[050]=0	core[051]=0	core[052]=0	core[053]=0	core[054]=0	core[055]=0	core[056]=0	core[057]=0	core[058]=0	core[059]=0	core[060]=0	core[061]=0	core[062]=0	core[063]=0	core[064]=0	core[065]=0	core[066]=0	core[067]=0	core[068]=0	core[069]=0	core[070]=0	core[071]=0	core[072]=0	core[073]=0	core[074]=0	core[075]=0	core[076]=0	core[077]=0	core[078]=0	core[079]=0	core[080]=0	core[081]=0	core[082]=0	core[083]=0	core[084]=0	core[085]=0	core[086]=0	core[087]=0	core[088]=0	core[089]=0	core[090]=0	core[091]=0	core[092]=0	core[093]=0	core[094]=0	core[095]=0	core[096]=0	core[097]=0	core[098]=0	core[099]=0	core[100]=0	core[101]=0	core[102]=0	core[103]=0	core[104]=0	core[105]=0	core[106]=0	core[107]=0	core[108]=0	core[109]=0	core[110]=0	core[111]=0	core[112]=0	core[113]=0

freq[00]=650	freq[01]=650	freq[02]=650	freq[03]=650	freq[04]=650	freq[05]=650	freq[06]=650	freq[07]=650	
freq[08]=650	freq[09]=650	freq[10]=650	freq[11]=650	freq[12]=650	freq[13]=650	freq[14]=650	freq[15]=650	
freq[16]=650	freq[17]=650	freq[18]=650	freq[19]=650	freq[20]=650	freq[21]=650	freq[22]=650	freq[23]=650	
freq[24]=650	freq[25]=650	freq[26]=650	freq[27]=650	freq[28]=650	freq[29]=650	freq[30]=650	freq[31]=650	
freq[32]=650	freq[33]=650	freq[34]=650	freq[35]=650	freq[36]=650	freq[37]=650	freq[38]=650	freq[39]=650	
freq[40]=650	freq[41]=650	freq[42]=650	freq[43]=650	freq[44]=650	freq[45]=650	freq[46]=650	freq[47]=650	
freq[48]=650	freq[49]=650	freq[50]=650	freq[51]=650	freq[52]=650	freq[53]=656	freq[54]=656	freq[55]=656	
freq[56]=656	freq[57]=656	freq[58]=656	freq[59]=656	freq[60]=656	freq[61]=656	freq[62]=656	

total valid nonce number:0
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:0
last_nonce_num:0
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
	



freq[00]=650	freq[01]=650	freq[02]=650	freq[03]=650	freq[04]=650	freq[05]=650	freq[06]=650	freq[07]=650	
freq[08]=650	freq[09]=650	freq[10]=650	freq[11]=650	freq[12]=650	freq[13]=650	freq[14]=631	freq[15]=650	
freq[16]=650	freq[17]=650	freq[18]=650	freq[19]=650	freq[20]=650	freq[21]=650	freq[22]=650	freq[23]=650	
freq[24]=650	freq[25]=650	freq[26]=650	freq[27]=650	freq[28]=650	freq[29]=650	freq[30]=650	freq[31]=650	
freq[32]=650	freq[33]=650	freq[34]=650	freq[35]=650	freq[36]=650	freq[37]=650	freq[38]=650	freq[39]=650	
freq[40]=650	freq[41]=650	freq[42]=650	freq[43]=650	freq[44]=650	freq[45]=650	freq[46]=656	freq[47]=656	
freq[48]=656	freq[49]=631	freq[50]=656	freq[51]=656	freq[52]=656	freq[53]=656	freq[54]=643	freq[55]=656	
freq[56]=656	freq[57]=656	freq[58]=656	freq[59]=656	freq[60]=656	freq[61]=656	freq[62]=656	

total valid nonce number:0
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:0
last_nonce_num:0
chain[5]: some chip cores are not opened FAILED!
Test Patten on chain[5]: FAILED!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
setStartTimePoint total_tv_start_sys=698 total_tv_end_sys=699
restartNum = 2 , auto-reinit enabled...
Error: check_asic_reg 0x08 timeout
Error: check_asic_reg 0x08 timeout
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: check_asic_reg 0x08 timeout
Error: set_BC_write_command wait buffer ready timeout!
Error: clement debug: wait BC ready timeout, PLUG ON=0x000000e0..
Error: check_asic_reg 0x08 timeout
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[5] Chip[62] local Temp=0
read failed on Chain[5] Chip[62] middle Temp old value:15
Special fix Chain[5] Chip[62] middle Temp = 15
Done read temp on Chain[5]
do read temp on Chain[7]
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=46077