Topic: S9 - Pic voltage problem. (Read 424 times)
Do a rollback !
Hello,
I did a very dumb thing and upgraded my 13.85 auto-frequency miner to Bitmains latest firmware. Of course, as soon as the miner rebooted, it only had 2 boards hashing. Did a little digging around and see that in the logs in mentioned that chains[5][6][7] have low pic voltage. It then says that it is using backup chain_voltage - however, it is still reading one of my boards as having 0 asic. At the end of the log, I believe it just ignores this last board and runs with the two it finds chips on.
I know this is not a board issue as the fucker was running great right up until I flashed the new firmware. Errr... Help!
I did a very dumb thing and upgraded my 13.85 auto-frequency miner to Bitmains latest firmware. Of course, as soon as the miner rebooted, it only had 2 boards hashing. Did a little digging around and see that in the logs in mentioned that chains[5][6][7] have low pic voltage. It then says that it is using backup chain_voltage - however, it is still reading one of my boards as having 0 asic. At the end of the log, I believe it just ignores this last board and runs with the two it finds chips on.
I know this is not a board issue as the fucker was running great right up until I flashed the new firmware. Errr... Help!
Jump to: