This kinda sounds like the issue dragonizer had. His aftermarket power supply drooped or collapsed under load, which seemed to crash bmminer, giving a "bmminer not found" error.
He heard a click from the psu when hashing started. What psu are you using, and can you try a different one?
If you have no other psu, power down and unplug one hash board from psu and ribbon cable. See if it runs at reduced load, which also suggests a psu problem
Topic: S9 Problem (Read 341 times)
Hi
two different s9 kernel files same problem
first
https://tr.scribd.com/document/366306419/Problem-1
second
https://tr.scribd.com/document/366306434/Problem-n
two different s9 kernel files same problem
first
https://tr.scribd.com/document/366306419/Problem-1
second
https://tr.scribd.com/document/366306434/Problem-n
Can you post the kernel log
They're working normally now because I reset them. the current kernel log is as follows. If the problem occurs, then the kernel log is also sent.
https://tr.scribd.com/document/366193512/1-normal
Thanks
https://tr.scribd.com/document/366193512/1-normal
Thanks
Can you post the kernel log
Hi
I open the machine and it is normally connected and working. When I check it, I see that it does not mining. As in the picture. But the green light on the machine continues to flash (I'm testing the network, pinging normally). When I look at Pool dashboard the workers seem to be off. Any ideas on this?
https://ibb.co/dsNtFG
https://ibb.co/dsNtFG
I open the machine and it is normally connected and working. When I check it, I see that it does not mining. As in the picture. But the green light on the machine continues to flash (I'm testing the network, pinging normally). When I look at Pool dashboard the workers seem to be off. Any ideas on this?
https://ibb.co/dsNtFG
https://ibb.co/dsNtFG
Jump to: