Hey Guys,
So I had this Antminer S9 (December, 2017 Batch, 14TH) working fine for a day. I shut it down and when I turned it back on the next day, it doesn't give me the Hardware Version or BMMiner version. The error I'm receiving in the Kernel Log is:
check chain[5]: asicNum = 63
check chain[6]: asicNum = 63
check chain[7]: asicNum = 59
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry check chain[7]: asicNum = 59
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry check chain[7]: asicNum = 59
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry check chain[7]: asicNum = 59
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry check chain[7]: asicNum = 59
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry check chain[7]: asicNum = 59
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry check chain[7]: asicNum = 59
The AsicNum=59 on chain[7]
post search failed code: J8:2
post: http://192.168.60.104/mms/postfailedcode.do?minertype=S9&minerID=8014cc01123b8854&failedCode=J8:2
ERROR: Failed to fetch url (http://192.168.60.104/mms/postfailedcode.do?minertype=S9&minerID=8014cc01123b8854&failedCode=J8:2) - curl said: Timeout was reached
post: http://10.70.22.1/mms/postfailedcode.do?minertype=S9&minerID=8014cc01123b8854&failedCode=J8:2
ERROR: Failed to fetch url (http://10.70.22.1/mms/postfailedcode.do?minertype=S9&minerID=8014cc01123b8854&failedCode=J8:2) - curl said: Timeout was reached
post: http://10.72.3.11/mms/postfailedcode.do?minertype=S9&minerID=8014cc01123b8854&failedCode=J8:2
ERROR: Failed to fetch url (http://10.72.3.11/mms/postfailedcode.do?minertype=S9&minerID=8014cc01123b8854&failedCode=J8:2) - curl said: Timeout was reached
I don't have any red lights, the ethernet cables all light up and the Hash boards light up in red occasionally while only 2 of the 3 staying on.
Any ideas or fixes I can do?
So far, I try to flash the firmware but it keeps saying incorrect firmware. I have reset via the reset button, software reset and also IP reset and no go with all.
I appreciate any direction you guys can give me.
Thanks.
(Moderator note: This post was edited by frodocooper to use code tags for the log output and to reduce the amount of unnecessary white space.)