Author

Topic: S9 ten minute boot (to hashing) times... (Read 1055 times)

member
Activity: 113
Merit: 10
August 20, 2017, 06:52:11 AM
#8
I hope failed means miner is working with older firmware? If fails i will not try. Still searching if found any one succes update for this batch (16.3.Cool i will go further because now it is works without issue.


My apologies - yes, I mean failed to upgrade, however, it's still running on the older firmware.
full member
Activity: 333
Merit: 109
August 20, 2017, 01:00:05 AM
#7
I hope failed means miner is working with older firmware? If fails i will not try. Still searching if found any one succes update for this batch (16.3.Cool i will go further because now it is works without issue.
member
Activity: 113
Merit: 10
August 19, 2017, 08:27:38 PM
#6
I have same batch and same firmware take about 10 min also.
Firmware is Fri Jul 21 05:15:25 EDT 2017
Antminer-S9-all-201708151137-autofreq-user-Update2UBI-NF.tar.gz
This is look like a never firmware should i upgrade ?
It is doing  very well so far 2 of them work 29.5 th/avarage


I tried to update - but it failed.  Let me know if you get it to work.  I'd be interested in knowing the boot-to-hashing times on the newer firmware. 

Thanks for your time and response!

full member
Activity: 333
Merit: 109
August 19, 2017, 06:15:39 PM
#5
I have same batch and same firmware take about 10 min also.
Firmware is Fri Jul 21 05:15:25 EDT 2017
Antminer-S9-all-201708151137-autofreq-user-Update2UBI-NF.tar.gz
This is look like a never firmware should i upgrade ?
It is doing  very well so far 2 of them work 29.5 th/avarage
member
Activity: 113
Merit: 10
August 17, 2017, 03:05:31 PM
#4
That would be the auto-tune doing its thing upon reboot.  My R4 does the same.
Indeed the previous S models (5, 7) didn't have this and start hashing much faster.

I didn't even think of that - thank you - makes perfect sense!  Cheesy
hero member
Activity: 756
Merit: 560
August 17, 2017, 02:56:13 PM
#3
Its completely normal. I have had machines that take up to 45 minutes to start hashing after a full cold boot power cycle.
hero member
Activity: 1610
Merit: 538
I'm in BTC XTC
August 17, 2017, 02:05:01 PM
#2
That would be the auto-tune doing its thing upon reboot.  My R4 does the same.
Indeed the previous S models (5, 7) didn't have this and start hashing much faster.
member
Activity: 113
Merit: 10
August 17, 2017, 02:04:07 PM
#1
I have an S9 that's taking 10 minutes to boot to hashing.

Is this normal?   My other Sx boot much quicker.  

See the hardware/file info below.  

Should I attempt to update the firmware?

I'm not terribly concerned with the slow boot, but I'm more thinking it's a bad filesystem or something causing it to hang.  ?

Thanks in advance for your time and thoughts.

================

Miner Type                  Antminer S9
Model                          GNU/Linux
Hardware Version             16.8.1.3
Kernel Version                  Linux 3.14.0-xilinx-gb190cb0-dirty #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
File System Version          Fri Jul 21 05:15:25 EDT 2017
Logic Version                  S9V2.23
BMminer Version          2.0.0
Uptime                          3
Load Average                  0.27, 0.19, 0.19

Jump to: