Topic: S9 with low hashrate is one of my boards dead? (Read 184 times)
How many times have you restarted it? It's pretty common for these miners to have issues, and 99% of the time a few restarts will resolve them.
Defs send it back. It has one dead board and two with ailing ASICs. I understand ASIC cores sort of decay over time but you really seem to have a lemon.
Perfect. Thank you. Didn't know that.
You either run the miner at 9th or you replace the board. You can replace it yourself if you are sure that you are no longer under warranty. Bitmain has been providing a 6 month warranty for their miners for a while now. You can always check with the serial number of your miner just in case:
https://shop.bitmain.com/user/viewCertSn.htm
https://shop.bitmain.com/user/viewCertSn.htm
They come with a 6 month warranty now, id double check the serial number. Bitmains site has a warranty checker so you can confirm.
I suspect one of my boards are dead as I just see 126 asics and am hashing at ~9TH/s.
What do folks generally recommend on doing it? It already passed the 3 month warranty.
What do folks generally recommend on doing it? It already passed the 3 month warranty.
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000016] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000314] ps7-ttc #0 at df804000, irq=43
[ 0.000629] Console: colour dummy device 80x30
[ 0.000661] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040213] pid_max: default: 32768 minimum: 301
[ 0.040436] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040456] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042626] CPU: Testing write buffer coherency: ok
[ 0.042981] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043041] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043266] L310 cache controller enabled
[ 0.043286] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121045] CPU1: Booted secondary processor
[ 0.210233] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210367] Brought up 2 CPUs
[ 0.210387] SMP: Total of 2 processors activated.
[ 0.210395] CPU: All CPU(s) started in SVC mode.
[ 0.211069] devtmpfs: initialized
[ 0.213486] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214739] regulator-dummy: no parameters
[ 0.223714] NET: Registered protocol family 16
[ 0.226032] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228348] cpuidle: using governor ladder
[ 0.228361] cpuidle: using governor menu
[ 0.235921] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237454] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237467] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237591] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259651] bio: create slab at 0
[ 0.261420] vgaarb: loaded
[ 0.262152] SCSI subsystem initialized
[ 0.263060] usbcore: registered new interface driver usbfs
[ 0.263241] usbcore: registered new interface driver hub
[ 0.263472] usbcore: registered new device driver usb
[ 0.264007] media: Linux media interface: v0.10
[ 0.264180] Linux video capture interface: v2.00
[ 0.264423] pps_core: LinuxPPS API ver. 1 registered
[ 0.264435] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264562] PTP clock support registered
[ 0.264928] EDAC MC: Ver: 3.0.0
[ 0.265991] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269005] DMA-API: preallocated 4096 debug entries
[ 0.269020] DMA-API: debugging enabled by kernel config
[ 0.269111] Switched to clocksource arm_global_timer
[ 0.289834] NET: Registered protocol family 2
[ 0.290533] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.290590] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.290675] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.290723] TCP: reno registered
[ 0.290741] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290777] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291030] NET: Registered protocol family 1
[ 0.291385] RPC: Registered named UNIX socket transport module.
[ 0.291398] RPC: Registered udp transport module.
[ 0.291406] RPC: Registered tcp transport module.
[ 0.291414] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291428] PCI: CLS 0 bytes, default 64
[ 0.291904] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293977] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296150] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296352] msgmni has been set to 967
[ 0.297157] io scheduler noop registered
[ 0.297172] io scheduler deadline registered
[ 0.297220] io scheduler cfq registered (default)
[ 0.308192] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.308214] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.433432] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.001317] console [ttyPS0] enabled
[ 1.005603] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.013250] [drm] Initialized drm 1.1.0 20060810
[ 1.030314] brd: module loaded
[ 1.039788] loop: module loaded
[ 1.049651] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.055401] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.063446] libphy: XEMACPS mii bus: probed
[ 1.067815] ------------- phy_id = 0x3625e62
[ 1.072734] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.081337] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.087950] ehci-pci: EHCI PCI platform driver
[ 1.095203] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.102178] usbcore: registered new interface driver usb-storage
[ 1.109044] mousedev: PS/2 mouse device common for all mice
[ 1.115187] i2c /dev entries driver
[ 1.122160] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.127653] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.133597] Xilinx Zynq CpuIdle Driver started
[ 1.138450] sdhci: Secure Digital Host Controller Interface driver
[ 1.144575] sdhci: Copyright(c) Pierre Ossman
[ 1.148885] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.155708] mmc0: no vqmmc regulator found
[ 1.159749] mmc0: no vmmc regulator found
[ 1.199138] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207841] usbcore: registered new interface driver usbhid
[ 1.213354] usbhid: USB HID core driver
[ 1.218076] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224375] nand: Micron MT29F2G08ABAEAWP
[ 1.228344] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234289] Bad block table found at page 131008, version 0x01
[ 1.240534] Bad block table found at page 130944, version 0x01
[ 1.246588] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252359] Creating 3 MTD partitions on "pl353-nand":
[ 1.257460] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265560] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272929] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281927] TCP: cubic registered
[ 1.285165] NET: Registered protocol family 17
[ 1.289897] Registering SWP/SWPB emulation handler
[ 1.295814] regulator-dummy: disabling
[ 1.300273] UBI: attaching mtd1 to ubi0
[ 1.825907] UBI: scanning is finished
[ 1.837585] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.844669] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.851431] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.858094] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.864972] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.870953] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.878060] UBI: max/mean erase counter: 45/20, WL threshold: 4096, image sequence number: 1283732989
[ 1.887277] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.896495] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.896500] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.900557] ALSA device list:
[ 1.900560] No soundcards found.
[ 1.916963] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.971720] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.977648] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.986787] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.996675] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.001713] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[ 2.013453] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.020935] devtmpfs: mounted
[ 2.024048] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.871284] random: dd urandom read with 0 bits of entropy available
[ 3.269132]
[ 3.269132] bcm54xx_config_init
[ 3.879136]
[ 3.879136] bcm54xx_config_init
[ 7.879983] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.886087] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 21.159676] In axi fpga driver!
[ 21.162753] request_mem_region OK!
[ 21.166142] AXI fpga dev virtual address is 0xdf9fc000
[ 21.171275] *base_vir_addr = 0x8c510
[ 21.187098] In fpga mem driver!
[ 21.190236] request_mem_region OK!
[ 21.193740] fpga mem virtual address is 0xe2000000
[ 22.008546]
[ 22.008546] bcm54xx_config_init
[ 22.638436]
[ 22.638436] bcm54xx_config_init
[ 26.638880] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 26.644988] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 800044ca18c08814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[7] has core num=1
Chain[5] ASIC[62] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[16] has core num=1
Chain[6] ASIC[17] has core num=15
Chain[6] ASIC[20] has core num=15
Chain[6] ASIC[29] has core num=15
Chain[6] ASIC[40] has core num=11
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=125 on chain[6], value=870
get PIC voltage=57 on chain[7], value=910
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,36,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,36,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,36,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1352 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1579 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 800044ca18c08814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[5] speed=5400
get fan[2] speed=6000
get fan[5] speed=5400
get fan[2] speed=6000
get fan[5] speed=5400
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=910
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=910 [57]
Chain[J8] get working chain_voltage_pic=57
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[7] has core num=1
Chain[J6] ASIC[62] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[16] has core num=1
Chain[J7] ASIC[17] has core num=15
Chain[J7] ASIC[20] has core num=15
Chain[J7] ASIC[29] has core num=15
Chain[J7] ASIC[40] has core num=11
miner total rate=9221GH/s fixed rate=9000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Asic[40]:687
Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:6 max freq=687
Chain:6 min freq=687
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Detect a bad chip=17 on chain[6], fixed to 400M
Asic[17]:687 Asic[18]:687 Asic[19]:687 Detect a bad chip=20 on chain[6], fixed to 400M
Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Detect a bad chip=29 on chain[6], fixed to 400M
Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Asic[40]:687
Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:6 max freq=687
Chain:6 min freq=687
max freq = 687
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,36,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:31 remote:34 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,36,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:30 remote:33 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=911
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[07]=911
core[058]=7
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57455
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25872
last_nonce_num:24206
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=911 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=909 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=911 asic[38]=911 asic[39]=912
asic[40]=197 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=909 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=910 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=909 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[09]=911
core[108]=7
asic[30]=909
core[020]=6 core[058]=7
asic[37]=911
core[077]=7
asic[38]=911
core[110]=7
asic[40]=197
core[001]=0 core[002]=6 core[003]=7 core[004]=7 core[005]=1 core[006]=6 core[007]=6 core[008]=6 core[009]=6 core[010]=6 core[011]=6 core[012]=6 core[013]=7 core[014]=6 core[015]=1 core[016]=0 core[017]=0 core[018]=2 core[019]=6 core[020]=6 core[021]=5 core[022]=4 core[023]=4 core[024]=2 core[025]=3 core[026]=2 core[027]=0 core[028]=3 core[029]=2 core[030]=3 core[031]=3 core[032]=0 core[033]=0 core[034]=2 core[035]=2 core[036]=2 core[037]=3 core[038]=3 core[039]=0 core[040]=3 core[041]=3 core[042]=3 core[043]=0 core[044]=3 core[045]=2 core[046]=3 core[047]=0 core[048]=2 core[049]=2 core[050]=0 core[051]=1 core[052]=3 core[053]=0 core[054]=0 core[055]=0 core[056]=1 core[058]=0 core[059]=0 core[060]=0 core[061]=2 core[062]=0 core[063]=0 core[064]=0 core[065]=1 core[066]=2 core[067]=2 core[068]=3 core[069]=0 core[070]=2 core[071]=0 core[072]=0 core[073]=1 core[074]=0 core[075]=0 core[076]=0 core[077]=0 core[078]=2 core[079]=0 core[080]=0 core[081]=1 core[082]=2 core[083]=0 core[084]=1 core[085]=2 core[086]=0 core[087]=0 core[088]=0 core[089]=0 core[090]=0 core[091]=0 core[092]=0 core[093]=0 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[45]=909
core[058]=5
asic[50]=910
core[062]=6
asic[61]=909
core[060]=6 core[068]=7
freq[00]=687 freq[01]=687 freq[02]=687 freq[03]=687 freq[04]=687 freq[05]=687 freq[06]=687 freq[07]=687
freq[08]=687 freq[09]=687 freq[10]=687 freq[11]=687 freq[12]=687 freq[13]=687 freq[14]=687 freq[15]=687
freq[16]=687 freq[17]=687 freq[18]=687 freq[19]=687 freq[20]=687 freq[21]=687 freq[22]=687 freq[23]=687
freq[24]=687 freq[25]=687 freq[26]=687 freq[27]=687 freq[28]=687 freq[29]=687 freq[30]=687 freq[31]=687
freq[32]=687 freq[33]=687 freq[34]=687 freq[35]=687 freq[36]=687 freq[37]=687 freq[38]=687 freq[39]=687
freq[40]=687 freq[41]=687 freq[42]=687 freq[43]=687 freq[44]=687 freq[45]=687 freq[46]=687 freq[47]=687
freq[48]=687 freq[49]=687 freq[50]=687 freq[51]=687 freq[52]=687 freq[53]=687 freq[54]=687 freq[55]=687
freq[56]=687 freq[57]=687 freq[58]=687 freq[59]=687 freq[60]=687 freq[61]=687 freq[62]=687
total valid nonce number:56727
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27220
last_nonce_num:14600
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[6]...
Done open core on Chain[6]!
start send works on chain[5]
start send works on chain[6]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25886
last_nonce_num:36312
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=106 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[40]=106
core[001]=0 core[002]=1 core[003]=1 core[004]=1 core[005]=0 core[006]=1 core[007]=1 core[008]=1 core[009]=1 core[010]=1 core[011]=1 core[012]=1 core[013]=1 core[014]=1 core[015]=1 core[016]=1 core[017]=0 core[018]=1 core[019]=2 core[020]=3 core[021]=2 core[022]=2 core[023]=2 core[024]=2 core[025]=2 core[026]=2 core[027]=0 core[028]=1 core[029]=1 core[030]=1 core[031]=1 core[032]=0 core[033]=0 core[034]=1 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=1 core[049]=0 core[050]=2 core[051]=3 core[052]=1 core[053]=0 core[054]=1 core[055]=0 core[056]=1 core[058]=0 core[059]=4 core[060]=0 core[061]=5 core[062]=0 core[063]=0 core[064]=0 core[065]=3 core[066]=2 core[067]=2 core[068]=1 core[069]=0 core[070]=3 core[071]=3 core[072]=0 core[073]=1 core[074]=2 core[075]=1 core[076]=0 core[077]=1 core[078]=1 core[079]=1 core[080]=1 core[081]=1 core[082]=0 core[083]=0 core[084]=1 core[085]=1 core[086]=0 core[087]=1 core[088]=1 core[089]=0 core[090]=0 core[091]=0 core[092]=1 core[093]=1 core[094]=1 core[095]=1 core[096]=0 core[097]=1 core[098]=1 core[099]=1 core[100]=0 core[101]=1 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
freq[00]=687 freq[01]=687 freq[02]=687 freq[03]=687 freq[04]=687 freq[05]=687 freq[06]=687 freq[07]=687
freq[08]=687 freq[09]=687 freq[10]=687 freq[11]=687 freq[12]=687 freq[13]=687 freq[14]=687 freq[15]=687
freq[16]=687 freq[17]=687 freq[18]=687 freq[19]=687 freq[20]=687 freq[21]=687 freq[22]=687 freq[23]=687
freq[24]=687 freq[25]=687 freq[26]=687 freq[27]=687 freq[28]=687 freq[29]=687 freq[30]=687 freq[31]=687
freq[32]=687 freq[33]=687 freq[34]=687 freq[35]=687 freq[36]=687 freq[37]=687 freq[38]=687 freq[39]=687
freq[40]=687 freq[41]=687 freq[42]=687 freq[43]=687 freq[44]=687 freq[45]=687 freq[46]=687 freq[47]=687
freq[48]=687 freq[49]=687 freq[50]=687 freq[51]=687 freq[52]=687 freq[53]=687 freq[54]=687 freq[55]=687
freq[56]=687 freq[57]=687 freq[58]=687 freq[59]=687 freq[60]=687 freq[61]=687 freq[62]=687
total valid nonce number:56650
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27200
last_nonce_num:9999
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
setStartTimePoint total_tv_start_sys=392 total_tv_end_sys=393
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=71.9910 Asic[02]=67.3600 Asic[03]=74.4230 Asic[04]=71.9230 Asic[05]=73.0140 Asic[06]=71.9570 Asic[07]=70.4130 Asic[08]=68.6520
Asic[09]=68.6850 Asic[10]=73.1480 Asic[11]=73.6850 Asic[12]=69.8930 Asic[13]=71.2520 Asic[14]=74.9430 Asic[15]=66.6720 Asic[16]=65.5310
Asic[17]=70.1450 Asic[18]=72.5270 Asic[19]=73.2150 Asic[20]=73.5340 Asic[21]=71.0510 Asic[22]=67.9140 Asic[23]=65.8330 Asic[24]=69.9770
Asic[25]=64.3570 Asic[26]=67.6120 Asic[27]=74.8430 Asic[28]=68.3500 Asic[29]=70.1950 Asic[30]=68.5850 Asic[31]=75.3800 Asic[32]=73.1650
Asic[33]=64.4070 Asic[34]=67.2430 Asic[35]=76.3020 Asic[36]=70.3800 Asic[37]=70.2960 Asic[38]=74.1720 Asic[39]=68.8200 Asic[40]=73.2150
Asic[41]=70.8330 Asic[42]=69.1720 Asic[43]=67.9470 Asic[44]=75.9500 Asic[45]=72.0410 Asic[46]=68.3830 Asic[47]=75.5980 Asic[48]=72.7290
Asic[49]=72.7960 Asic[50]=72.0580 Asic[51]=78.6180 Asic[52]=65.6660 Asic[53]=72.9640 Asic[54]=73.0470 Asic[55]=65.6320 Asic[56]=69.4740
Asic[57]=72.7960 Asic[58]=67.8630 Asic[59]=68.9870 Asic[60]=76.2690 Asic[61]=64.3400 Asic[62]=77.3090 Asic[63]=75.7650
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=78.8520 Asic[02]=75.0100 Asic[03]=71.5710 Asic[04]=75.6480 Asic[05]=76.6380 Asic[06]=83.3820 Asic[07]=79.3730 Asic[08]=82.2250
Asic[09]=75.2960 Asic[10]=78.0810 Asic[11]=74.1880 Asic[12]=81.9230 Asic[13]=74.2890 Asic[14]=78.5170 Asic[15]=81.7050 Asic[16]=76.6550
Asic[17]=80.8150 Asic[18]=42.3120 Asic[19]=78.9870 Asic[20]=80.5970 Asic[21]=49.0560 Asic[22]=78.1810 Asic[23]=77.6110 Asic[24]=78.3660
Asic[25]=78.2990 Asic[26]=75.1950 Asic[27]=80.2780 Asic[28]=80.0770 Asic[29]=80.5470 Asic[30]=47.0600 Asic[31]=77.2080 Asic[32]=77.6950
Asic[33]=77.5100 Asic[34]=79.3890 Asic[35]=80.6980 Asic[36]=72.6780 Asic[37]=79.5570 Asic[38]=80.7310 Asic[39]=77.2920 Asic[40]=79.0030
Asic[41]=24.7120 Asic[42]=80.0270 Asic[43]=77.2080 Asic[44]=75.3460 Asic[45]=79.4900 Asic[46]=78.5500 Asic[47]=81.4030 Asic[48]=77.1750
Asic[49]=74.5070 Asic[50]=80.3960 Asic[51]=76.2180 Asic[52]=77.2920 Asic[53]=76.8220 Asic[54]=80.2450 Asic[55]=79.7420 Asic[56]=80.8490
Asic[57]=73.5840 Asic[58]=76.8730 Asic[59]=78.8690 Asic[60]=80.2280 Asic[61]=74.8430 Asic[62]=80.0270 Asic[63]=71.5710
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=60
Chain[5] Chip[62] middle Temp=67
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=61
Chain[6] Chip[62] middle Temp=74
Special fix Chain[6] Chip[62] middle Temp = 76
Done read temp on Chain[6]
set FAN speed according to: temp_highest=61 temp_top1[PWM_T]=61 temp_top1[TEMP_POS_LOCAL]=61 temp_change=0 fix_fan_steps=0
FAN PWM: 100
read_temp_func Done!
CRC error counter=2
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000016] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000314] ps7-ttc #0 at df804000, irq=43
[ 0.000629] Console: colour dummy device 80x30
[ 0.000661] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040213] pid_max: default: 32768 minimum: 301
[ 0.040436] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040456] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042626] CPU: Testing write buffer coherency: ok
[ 0.042981] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043041] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043266] L310 cache controller enabled
[ 0.043286] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121045] CPU1: Booted secondary processor
[ 0.210233] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210367] Brought up 2 CPUs
[ 0.210387] SMP: Total of 2 processors activated.
[ 0.210395] CPU: All CPU(s) started in SVC mode.
[ 0.211069] devtmpfs: initialized
[ 0.213486] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214739] regulator-dummy: no parameters
[ 0.223714] NET: Registered protocol family 16
[ 0.226032] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228348] cpuidle: using governor ladder
[ 0.228361] cpuidle: using governor menu
[ 0.235921] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237454] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237467] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237591] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259651] bio: create slab
[ 0.261420] vgaarb: loaded
[ 0.262152] SCSI subsystem initialized
[ 0.263060] usbcore: registered new interface driver usbfs
[ 0.263241] usbcore: registered new interface driver hub
[ 0.263472] usbcore: registered new device driver usb
[ 0.264007] media: Linux media interface: v0.10
[ 0.264180] Linux video capture interface: v2.00
[ 0.264423] pps_core: LinuxPPS API ver. 1 registered
[ 0.264435] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264562] PTP clock support registered
[ 0.264928] EDAC MC: Ver: 3.0.0
[ 0.265991] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269005] DMA-API: preallocated 4096 debug entries
[ 0.269020] DMA-API: debugging enabled by kernel config
[ 0.269111] Switched to clocksource arm_global_timer
[ 0.289834] NET: Registered protocol family 2
[ 0.290533] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.290590] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.290675] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.290723] TCP: reno registered
[ 0.290741] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290777] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291030] NET: Registered protocol family 1
[ 0.291385] RPC: Registered named UNIX socket transport module.
[ 0.291398] RPC: Registered udp transport module.
[ 0.291406] RPC: Registered tcp transport module.
[ 0.291414] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291428] PCI: CLS 0 bytes, default 64
[ 0.291904] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293977] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296150] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296352] msgmni has been set to 967
[ 0.297157] io scheduler noop registered
[ 0.297172] io scheduler deadline registered
[ 0.297220] io scheduler cfq registered (default)
[ 0.308192] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.308214] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.433432] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.001317] console [ttyPS0] enabled
[ 1.005603] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.013250] [drm] Initialized drm 1.1.0 20060810
[ 1.030314] brd: module loaded
[ 1.039788] loop: module loaded
[ 1.049651] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.055401] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.063446] libphy: XEMACPS mii bus: probed
[ 1.067815] ------------- phy_id = 0x3625e62
[ 1.072734] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.081337] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.087950] ehci-pci: EHCI PCI platform driver
[ 1.095203] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.102178] usbcore: registered new interface driver usb-storage
[ 1.109044] mousedev: PS/2 mouse device common for all mice
[ 1.115187] i2c /dev entries driver
[ 1.122160] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.127653] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.133597] Xilinx Zynq CpuIdle Driver started
[ 1.138450] sdhci: Secure Digital Host Controller Interface driver
[ 1.144575] sdhci: Copyright(c) Pierre Ossman
[ 1.148885] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.155708] mmc0: no vqmmc regulator found
[ 1.159749] mmc0: no vmmc regulator found
[ 1.199138] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207841] usbcore: registered new interface driver usbhid
[ 1.213354] usbhid: USB HID core driver
[ 1.218076] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224375] nand: Micron MT29F2G08ABAEAWP
[ 1.228344] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234289] Bad block table found at page 131008, version 0x01
[ 1.240534] Bad block table found at page 130944, version 0x01
[ 1.246588] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252359] Creating 3 MTD partitions on "pl353-nand":
[ 1.257460] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265560] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272929] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281927] TCP: cubic registered
[ 1.285165] NET: Registered protocol family 17
[ 1.289897] Registering SWP/SWPB emulation handler
[ 1.295814] regulator-dummy: disabling
[ 1.300273] UBI: attaching mtd1 to ubi0
[ 1.825907] UBI: scanning is finished
[ 1.837585] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.844669] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.851431] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.858094] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.864972] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.870953] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.878060] UBI: max/mean erase counter: 45/20, WL threshold: 4096, image sequence number: 1283732989
[ 1.887277] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.896495] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.896500] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.900557] ALSA device list:
[ 1.900560] No soundcards found.
[ 1.916963] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.971720] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.977648] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.986787] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 1.996675] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.001713] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[ 2.013453] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.020935] devtmpfs: mounted
[ 2.024048] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.871284] random: dd urandom read with 0 bits of entropy available
[ 3.269132]
[ 3.269132] bcm54xx_config_init
[ 3.879136]
[ 3.879136] bcm54xx_config_init
[ 7.879983] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.886087] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 21.159676] In axi fpga driver!
[ 21.162753] request_mem_region OK!
[ 21.166142] AXI fpga dev virtual address is 0xdf9fc000
[ 21.171275] *base_vir_addr = 0x8c510
[ 21.187098] In fpga mem driver!
[ 21.190236] request_mem_region OK!
[ 21.193740] fpga mem virtual address is 0xe2000000
[ 22.008546]
[ 22.008546] bcm54xx_config_init
[ 22.638436]
[ 22.638436] bcm54xx_config_init
[ 26.638880] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 26.644988] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 800044ca18c08814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[7] has core num=1
Chain[5] ASIC[62] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[16] has core num=1
Chain[6] ASIC[17] has core num=15
Chain[6] ASIC[20] has core num=15
Chain[6] ASIC[29] has core num=15
Chain[6] ASIC[40] has core num=11
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=125 on chain[6], value=870
get PIC voltage=57 on chain[7], value=910
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,36,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,36,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,36,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1352 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 1579 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 800044ca18c08814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[2] speed=6000
get fan[5] speed=5400
get fan[2] speed=6000
get fan[5] speed=5400
get fan[2] speed=6000
get fan[5] speed=5400
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=910
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=910 [57]
Chain[J8] get working chain_voltage_pic=57
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[7] has core num=1
Chain[J6] ASIC[62] has core num=1
Chain[J7] has core num in PIC
Chain[J7] ASIC[16] has core num=1
Chain[J7] ASIC[17] has core num=15
Chain[J7] ASIC[20] has core num=15
Chain[J7] ASIC[29] has core num=15
Chain[J7] ASIC[40] has core num=11
miner total rate=9221GH/s fixed rate=9000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Asic[17]:687 Asic[18]:687 Asic[19]:687 Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Asic[40]:687
Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:6 max freq=687
Chain:6 min freq=687
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=687
Asic[ 0]:687
Asic[ 1]:687 Asic[ 2]:687 Asic[ 3]:687 Asic[ 4]:687 Asic[ 5]:687 Asic[ 6]:687 Asic[ 7]:687 Asic[ 8]:687
Asic[ 9]:687 Asic[10]:687 Asic[11]:687 Asic[12]:687 Asic[13]:687 Asic[14]:687 Asic[15]:687 Asic[16]:687
Detect a bad chip=17 on chain[6], fixed to 400M
Asic[17]:687 Asic[18]:687 Asic[19]:687 Detect a bad chip=20 on chain[6], fixed to 400M
Asic[20]:687 Asic[21]:687 Asic[22]:687 Asic[23]:687 Asic[24]:687
Asic[25]:687 Asic[26]:687 Asic[27]:687 Asic[28]:687 Detect a bad chip=29 on chain[6], fixed to 400M
Asic[29]:687 Asic[30]:687 Asic[31]:687 Asic[32]:687
Asic[33]:687 Asic[34]:687 Asic[35]:687 Asic[36]:687 Asic[37]:687 Asic[38]:687 Asic[39]:687 Asic[40]:687
Asic[41]:687 Asic[42]:687 Asic[43]:687 Asic[44]:687 Asic[45]:687 Asic[46]:687 Asic[47]:687 Asic[48]:687
Asic[49]:687 Asic[50]:687 Asic[51]:687 Asic[52]:687 Asic[53]:687 Asic[54]:687 Asic[55]:687 Asic[56]:687
Asic[57]:687 Asic[58]:687 Asic[59]:687 Asic[60]:687 Asic[61]:687 Asic[62]:687
Chain:6 max freq=687
Chain:6 min freq=687
max freq = 687
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,36,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:31 remote:34 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,36,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:30 remote:33 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=911
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[07]=911
core[058]=7
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57455
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25872
last_nonce_num:24206
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=911 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=909 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=911 asic[38]=911 asic[39]=912
asic[40]=197 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=909 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=910 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=909 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[09]=911
core[108]=7
asic[30]=909
core[020]=6 core[058]=7
asic[37]=911
core[077]=7
asic[38]=911
core[110]=7
asic[40]=197
core[001]=0 core[002]=6 core[003]=7 core[004]=7 core[005]=1 core[006]=6 core[007]=6 core[008]=6 core[009]=6 core[010]=6 core[011]=6 core[012]=6 core[013]=7 core[014]=6 core[015]=1 core[016]=0 core[017]=0 core[018]=2 core[019]=6 core[020]=6 core[021]=5 core[022]=4 core[023]=4 core[024]=2 core[025]=3 core[026]=2 core[027]=0 core[028]=3 core[029]=2 core[030]=3 core[031]=3 core[032]=0 core[033]=0 core[034]=2 core[035]=2 core[036]=2 core[037]=3 core[038]=3 core[039]=0 core[040]=3 core[041]=3 core[042]=3 core[043]=0 core[044]=3 core[045]=2 core[046]=3 core[047]=0 core[048]=2 core[049]=2 core[050]=0 core[051]=1 core[052]=3 core[053]=0 core[054]=0 core[055]=0 core[056]=1 core[058]=0 core[059]=0 core[060]=0 core[061]=2 core[062]=0 core[063]=0 core[064]=0 core[065]=1 core[066]=2 core[067]=2 core[068]=3 core[069]=0 core[070]=2 core[071]=0 core[072]=0 core[073]=1 core[074]=0 core[075]=0 core[076]=0 core[077]=0 core[078]=2 core[079]=0 core[080]=0 core[081]=1 core[082]=2 core[083]=0 core[084]=1 core[085]=2 core[086]=0 core[087]=0 core[088]=0 core[089]=0 core[090]=0 core[091]=0 core[092]=0 core[093]=0 core[094]=0 core[095]=0 core[096]=0 core[097]=0 core[098]=0 core[099]=0 core[100]=0 core[101]=0 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
asic[45]=909
core[058]=5
asic[50]=910
core[062]=6
asic[61]=909
core[060]=6 core[068]=7
freq[00]=687 freq[01]=687 freq[02]=687 freq[03]=687 freq[04]=687 freq[05]=687 freq[06]=687 freq[07]=687
freq[08]=687 freq[09]=687 freq[10]=687 freq[11]=687 freq[12]=687 freq[13]=687 freq[14]=687 freq[15]=687
freq[16]=687 freq[17]=687 freq[18]=687 freq[19]=687 freq[20]=687 freq[21]=687 freq[22]=687 freq[23]=687
freq[24]=687 freq[25]=687 freq[26]=687 freq[27]=687 freq[28]=687 freq[29]=687 freq[30]=687 freq[31]=687
freq[32]=687 freq[33]=687 freq[34]=687 freq[35]=687 freq[36]=687 freq[37]=687 freq[38]=687 freq[39]=687
freq[40]=687 freq[41]=687 freq[42]=687 freq[43]=687 freq[44]=687 freq[45]=687 freq[46]=687 freq[47]=687
freq[48]=687 freq[49]=687 freq[50]=687 freq[51]=687 freq[52]=687 freq[53]=687 freq[54]=687 freq[55]=687
freq[56]=687 freq[57]=687 freq[58]=687 freq[59]=687 freq[60]=687 freq[61]=687 freq[62]=687
total valid nonce number:56727
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27220
last_nonce_num:14600
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[6]...
Done open core on Chain[6]!
start send works on chain[5]
start send works on chain[6]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25886
last_nonce_num:36312
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=106 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[40]=106
core[001]=0 core[002]=1 core[003]=1 core[004]=1 core[005]=0 core[006]=1 core[007]=1 core[008]=1 core[009]=1 core[010]=1 core[011]=1 core[012]=1 core[013]=1 core[014]=1 core[015]=1 core[016]=1 core[017]=0 core[018]=1 core[019]=2 core[020]=3 core[021]=2 core[022]=2 core[023]=2 core[024]=2 core[025]=2 core[026]=2 core[027]=0 core[028]=1 core[029]=1 core[030]=1 core[031]=1 core[032]=0 core[033]=0 core[034]=1 core[035]=0 core[036]=0 core[037]=0 core[038]=0 core[039]=0 core[040]=0 core[041]=0 core[042]=0 core[043]=0 core[044]=0 core[045]=0 core[046]=0 core[047]=0 core[048]=1 core[049]=0 core[050]=2 core[051]=3 core[052]=1 core[053]=0 core[054]=1 core[055]=0 core[056]=1 core[058]=0 core[059]=4 core[060]=0 core[061]=5 core[062]=0 core[063]=0 core[064]=0 core[065]=3 core[066]=2 core[067]=2 core[068]=1 core[069]=0 core[070]=3 core[071]=3 core[072]=0 core[073]=1 core[074]=2 core[075]=1 core[076]=0 core[077]=1 core[078]=1 core[079]=1 core[080]=1 core[081]=1 core[082]=0 core[083]=0 core[084]=1 core[085]=1 core[086]=0 core[087]=1 core[088]=1 core[089]=0 core[090]=0 core[091]=0 core[092]=1 core[093]=1 core[094]=1 core[095]=1 core[096]=0 core[097]=1 core[098]=1 core[099]=1 core[100]=0 core[101]=1 core[102]=0 core[103]=0 core[104]=0 core[105]=0 core[106]=0 core[107]=0 core[108]=0 core[109]=0 core[110]=0 core[111]=0 core[112]=0 core[113]=0
freq[00]=687 freq[01]=687 freq[02]=687 freq[03]=687 freq[04]=687 freq[05]=687 freq[06]=687 freq[07]=687
freq[08]=687 freq[09]=687 freq[10]=687 freq[11]=687 freq[12]=687 freq[13]=687 freq[14]=687 freq[15]=687
freq[16]=687 freq[17]=687 freq[18]=687 freq[19]=687 freq[20]=687 freq[21]=687 freq[22]=687 freq[23]=687
freq[24]=687 freq[25]=687 freq[26]=687 freq[27]=687 freq[28]=687 freq[29]=687 freq[30]=687 freq[31]=687
freq[32]=687 freq[33]=687 freq[34]=687 freq[35]=687 freq[36]=687 freq[37]=687 freq[38]=687 freq[39]=687
freq[40]=687 freq[41]=687 freq[42]=687 freq[43]=687 freq[44]=687 freq[45]=687 freq[46]=687 freq[47]=687
freq[48]=687 freq[49]=687 freq[50]=687 freq[51]=687 freq[52]=687 freq[53]=687 freq[54]=687 freq[55]=687
freq[56]=687 freq[57]=687 freq[58]=687 freq[59]=687 freq[60]=687 freq[61]=687 freq[62]=687
total valid nonce number:56650
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:27200
last_nonce_num:9999
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
setStartTimePoint total_tv_start_sys=392 total_tv_end_sys=393
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=71.9910 Asic[02]=67.3600 Asic[03]=74.4230 Asic[04]=71.9230 Asic[05]=73.0140 Asic[06]=71.9570 Asic[07]=70.4130 Asic[08]=68.6520
Asic[09]=68.6850 Asic[10]=73.1480 Asic[11]=73.6850 Asic[12]=69.8930 Asic[13]=71.2520 Asic[14]=74.9430 Asic[15]=66.6720 Asic[16]=65.5310
Asic[17]=70.1450 Asic[18]=72.5270 Asic[19]=73.2150 Asic[20]=73.5340 Asic[21]=71.0510 Asic[22]=67.9140 Asic[23]=65.8330 Asic[24]=69.9770
Asic[25]=64.3570 Asic[26]=67.6120 Asic[27]=74.8430 Asic[28]=68.3500 Asic[29]=70.1950 Asic[30]=68.5850 Asic[31]=75.3800 Asic[32]=73.1650
Asic[33]=64.4070 Asic[34]=67.2430 Asic[35]=76.3020 Asic[36]=70.3800 Asic[37]=70.2960 Asic[38]=74.1720 Asic[39]=68.8200 Asic[40]=73.2150
Asic[41]=70.8330 Asic[42]=69.1720 Asic[43]=67.9470 Asic[44]=75.9500 Asic[45]=72.0410 Asic[46]=68.3830 Asic[47]=75.5980 Asic[48]=72.7290
Asic[49]=72.7960 Asic[50]=72.0580 Asic[51]=78.6180 Asic[52]=65.6660 Asic[53]=72.9640 Asic[54]=73.0470 Asic[55]=65.6320 Asic[56]=69.4740
Asic[57]=72.7960 Asic[58]=67.8630 Asic[59]=68.9870 Asic[60]=76.2690 Asic[61]=64.3400 Asic[62]=77.3090 Asic[63]=75.7650
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=78.8520 Asic[02]=75.0100 Asic[03]=71.5710 Asic[04]=75.6480 Asic[05]=76.6380 Asic[06]=83.3820 Asic[07]=79.3730 Asic[08]=82.2250
Asic[09]=75.2960 Asic[10]=78.0810 Asic[11]=74.1880 Asic[12]=81.9230 Asic[13]=74.2890 Asic[14]=78.5170 Asic[15]=81.7050 Asic[16]=76.6550
Asic[17]=80.8150 Asic[18]=42.3120 Asic[19]=78.9870 Asic[20]=80.5970 Asic[21]=49.0560 Asic[22]=78.1810 Asic[23]=77.6110 Asic[24]=78.3660
Asic[25]=78.2990 Asic[26]=75.1950 Asic[27]=80.2780 Asic[28]=80.0770 Asic[29]=80.5470 Asic[30]=47.0600 Asic[31]=77.2080 Asic[32]=77.6950
Asic[33]=77.5100 Asic[34]=79.3890 Asic[35]=80.6980 Asic[36]=72.6780 Asic[37]=79.5570 Asic[38]=80.7310 Asic[39]=77.2920 Asic[40]=79.0030
Asic[41]=24.7120 Asic[42]=80.0270 Asic[43]=77.2080 Asic[44]=75.3460 Asic[45]=79.4900 Asic[46]=78.5500 Asic[47]=81.4030 Asic[48]=77.1750
Asic[49]=74.5070 Asic[50]=80.3960 Asic[51]=76.2180 Asic[52]=77.2920 Asic[53]=76.8220 Asic[54]=80.2450 Asic[55]=79.7420 Asic[56]=80.8490
Asic[57]=73.5840 Asic[58]=76.8730 Asic[59]=78.8690 Asic[60]=80.2280 Asic[61]=74.8430 Asic[62]=80.0270 Asic[63]=71.5710
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=60
Chain[5] Chip[62] middle Temp=67
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=61
Chain[6] Chip[62] middle Temp=74
Special fix Chain[6] Chip[62] middle Temp = 76
Done read temp on Chain[6]
set FAN speed according to: temp_highest=61 temp_top1[PWM_T]=61 temp_top1[TEMP_POS_LOCAL]=61 temp_change=0 fix_fan_steps=0
FAN PWM: 100
read_temp_func Done!
CRC error counter=2
Jump to: