Both Chain 6 and 7 are missing zeroes benath the Asic status column and wondering if anyone has had a similar issue and knew of a fix? Below is my kernal log.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06e8cf4 (7044 kB)
[ 0.000000] .init : 0xc06e9000 - 0xc071d480 ( 210 kB)
[ 0.000000] .data : 0xc071e000 - 0xc0767058 ( 293 kB)
[ 0.000000] .bss : 0xc0767064 - 0xc07a7d64 ( 260 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000292] ps7-ttc #0 at df804000, irq=43
[ 0.000592] Console: colour dummy device 80x30
[ 0.000622] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040197] pid_max: default: 32768 minimum: 301
[ 0.040406] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040426] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042634] CPU: Testing write buffer coherency: ok
[ 0.042956] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043013] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[ 0.043233] L310 cache controller enabled
[ 0.043253] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120987] CPU1: Booted secondary processor
[ 0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210347] Brought up 2 CPUs
[ 0.210366] SMP: Total of 2 processors activated.
[ 0.210374] CPU: All CPU(s) started in SVC mode.
[ 0.211034] devtmpfs: initialized
[ 0.213484] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214690] regulator-dummy: no parameters
[ 0.222154] NET: Registered protocol family 16
[ 0.224383] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226656] cpuidle: using governor ladder
[ 0.226669] cpuidle: using governor menu
[ 0.234095] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235621] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235635] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235744] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.258097] bio: create slab
at 0
[ 0.259479] vgaarb: loaded
[ 0.260171] SCSI subsystem initialized
[ 0.261205] usbcore: registered new interface driver usbfs
[ 0.261376] usbcore: registered new interface driver hub
[ 0.261601] usbcore: registered new device driver usb
[ 0.262124] media: Linux media interface: v0.10
[ 0.262288] Linux video capture interface: v2.00
[ 0.262529] pps_core: LinuxPPS API ver. 1 registered
[ 0.262540] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.262670] PTP clock support registered
[ 0.263020] EDAC MC: Ver: 3.0.0
[ 0.264081] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266819] DMA-API: preallocated 4096 debug entries
[ 0.266832] DMA-API: debugging enabled by kernel config
[ 0.266909] Switched to clocksource arm_global_timer
[ 0.287580] NET: Registered protocol family 2
[ 0.288240] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.288297] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.288382] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.288423] TCP: reno registered
[ 0.288440] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288472] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.288707] NET: Registered protocol family 1
[ 0.289045] RPC: Registered named UNIX socket transport module.
[ 0.289057] RPC: Registered udp transport module.
[ 0.289065] RPC: Registered tcp transport module.
[ 0.289073] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.289087] PCI: CLS 0 bytes, default 64
[ 0.289524] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291532] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.293615] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293820] msgmni has been set to 967
[ 0.294607] io scheduler noop registered
[ 0.294620] io scheduler deadline registered
[ 0.294661] io scheduler cfq registered (default)
[ 0.306272] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.306292] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.429626] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.997349] console [ttyPS0] enabled
[ 1.001600] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.009232] [drm] Initialized drm 1.1.0 20060810
[ 1.026224] brd: module loaded
[ 1.035605] loop: module loaded
[ 1.045078] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.051066] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.058835] libphy: XEMACPS mii bus: probed
[ 1.063207] ------------- phy_id = 0x3625e62
[ 1.068088] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.076651] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.083298] ehci-pci: EHCI PCI platform driver
[ 1.090571] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.097459] usbcore: registered new interface driver usb-storage
[ 1.104295] mousedev: PS/2 mouse device common for all mice
[ 1.110426] i2c /dev entries driver
[ 1.117319] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.122796] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.128714] Xilinx Zynq CpuIdle Driver started
[ 1.133551] sdhci: Secure Digital Host Controller Interface driver
[ 1.139756] sdhci: Copyright(c) Pierre Ossman
[ 1.144025] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.150845] mmc0: no vqmmc regulator found
[ 1.154861] mmc0: no vmmc regulator found
[ 1.196926] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.205627] usbcore: registered new interface driver usbhid
[ 1.211146] usbhid: USB HID core driver
[ 1.215853] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.222145] nand: Micron MT29F2G08ABAEAWP
[ 1.226115] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.232065] Bad block table found at page 131008, version 0x01
[ 1.238313] Bad block table found at page 130944, version 0x01
[ 1.244359] 3 ofpart partitions found on MTD device pl353-nand
[ 1.250130] Creating 3 MTD partitions on "pl353-nand":
[ 1.255236] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.263268] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.270631] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.279337] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[ 1.285858] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.291175] TCP: cubic registered
[ 1.294410] NET: Registered protocol family 17
[ 1.299120] Registering SWP/SWPB emulation handler
[ 1.305025] regulator-dummy: disabling
[ 1.309388] UBI: attaching mtd1 to ubi0
[ 1.836361] UBI: scanning is finished
[ 1.847984] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.855041] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.861837] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.868514] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.875352] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.881361] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.888472] UBI: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 1925294910
[ 1.897502] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.906701] UBI: background thread "ubi_bgt0d" started, PID 1085
[ 1.906706] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.910762] ALSA device list:
[ 1.910765] No soundcards found.
[ 1.927064] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[ 1.990831] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.996756] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.005897] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.015775] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.020847] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D2E2157C-794A-4932-956B-E22078A65162, small LPT model
[ 2.032562] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.040219] devtmpfs: mounted
[ 2.043330] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[ 2.879804] random: dd urandom read with 0 bits of entropy available
[ 3.266953]
[ 3.266953] bcm54xx_config_init
[ 3.876952]
[ 3.876952] bcm54xx_config_init
[ 7.877777] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.883882] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 36.371133] In axi fpga driver!
[ 36.374204] request_mem_region OK!
[ 36.377622] AXI fpga dev virtual address is 0xdfa10000
[ 36.382702] *base_vir_addr = 0xc51e
[ 36.397410] In fpga mem driver!
[ 36.400689] request_mem_region OK!
[ 36.404250] fpga mem virtual address is 0xe2000000
[ 37.284886]
[ 37.284886] bcm54xx_config_init
[ 37.934815]
[ 37.934815] bcm54xx_config_init
[ 41.935241] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 41.941342] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 652.108586] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=650 Chain[5] voltage_pic=108 value=880
Fix freq=650 Chain[6] voltage_pic=108 value=880
Fix freq=650 Chain[7] voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 26 asic
Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 22 asic
Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 62 asic
Chain[J6] has no freq in PIC, set default freq=650M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=650M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=650M
Chain[J8] has no core num in PIC
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=26
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650
Chain:5 max freq=650
Chain:5 min freq=650
read PIC voltage=940 on chain[6]
Chain:6 chipnum=22
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650
Chain:6 max freq=650
Chain:6 min freq=650
read PIC voltage=940 on chain[7]
Chain:7 chipnum=62
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650
Chain:7 max freq=650
Chain:7 min freq=650
max freq = 650
set baud=1
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=880 [108]
Chain[J8] set working voltage=880 [108]
setStartTimePoint total_tv_start_sys=1417 total_tv_end_sys=1418
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000
get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Done read temp on Chain[5]
do read temp on Chain[6]
Done read temp on Chain[6]
do read temp on Chain[7]
Done read temp on Chain[7]
All temp chips failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=23708
