Topic: s9i no chips (Read 180 times)
If you are in the US there are multiple depots to ship to, you dont have to send it back to China anymore.
Considering a brand new s9 is under $500 right now there is no reason to try and repair the boards as it will cost you just as much as a new unit. Being an s9i, it cant be that old, is it still under warranty?
Yes a warranty, but shipping back to Bitmain would cost, the unit was shipped with others on 2018-05-25 13:54:57
Considering a brand new s9 is under $500 right now there is no reason to try and repair the boards as it will cost you just as much as a new unit. Being an s9i, it cant be that old, is it still under warranty?
I guess my miner needs a repair shop, tried the boards on a working unit and they all three report 0 asics and may not even be worth the repair costs
Anyone ever have this issue and resolved it? I have reset to default and flashed the latest firmware
Code:
Miner Type Antminer S9i
Hostname antMiner
Model GNU/Linux
Hardware Version 22.0.1.3
Kernel Version Linux 3.14.0-xilinx-ge8a2f71-dirty #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
File System Version Tue May 22 20:08:17 CST 2018
Logic Version S9i_VTest
BMminer Version 2.0.0
Uptime 12
Load Average 0.53, 0.23, 0.10
main.c:13690: log_level = 4
main.c:13717: This is XILINX board. Totalram: 507527168
main.c:13729: Detect 512MB control board of XILINX
driver-bitmain.c:1003: forceFreq=-1 forceFlag=0
main.c:8280: DETECT HW version=0000c516
main.c:13756: miner ID : 8018f5ca4e104814
main.c:13781: Miner Type = S9
main.c:13793: AsicType = 1387
main.c:13796: real AsicNum = 63
main.c:13889: use critical mode to search freq...
driver-bitmain.c:2401: get PLUG ON=0x000000e0
driver-bitmain.c:2471: Find hashboard on Chain[5]
driver-bitmain.c:2471: Find hashboard on Chain[6]
driver-bitmain.c:2471: Find hashboard on Chain[7]
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
main.c:2049: Check chain[5] PIC fw version=0x03
main.c:2049: Check chain[6] PIC fw version=0x03
main.c:2049: Check chain[7] PIC fw version=0x03
main.c:8664: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8706: has freq in PIC, will disable freq setting.
main.c:8805: chain[5] has freq in PIC and will jump over...
main.c:8809: Chain[5] has core num in PIC
main.c:8819: Chain[5] ASIC[17] has core num=4
main.c:2049: Check chain[5] PIC fw version=0x03
main.c:8664: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8706: has freq in PIC, will disable freq setting.
main.c:8805: chain[6] has freq in PIC and will jump over...
main.c:8809: Chain[6] has core num in PIC
main.c:2049: Check chain[6] PIC fw version=0x03
main.c:8664: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8706: has freq in PIC, will disable freq setting.
main.c:8805: chain[7] has freq in PIC and will jump over...
main.c:8809: Chain[7] has core num in PIC
main.c:2049: Check chain[7] PIC fw version=0x03
main.c:8883: get PIC voltage=6 on chain[5], value=940
main.c:8883: get PIC voltage=6 on chain[6], value=940
main.c:8883: get PIC voltage=6 on chain[7], value=940
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:9046: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9063: chain[5] temp chip I2C addr=0x98
main.c:9069: chain[5] has no middle temp, use special fix mode.
main.c:9046: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9063: chain[6] temp chip I2C addr=0x98
main.c:9069: chain[6] has no middle temp, use special fix mode.
main.c:9046: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9063: chain[7] temp chip I2C addr=0x98
main.c:9069: chain[7] has no middle temp, use special fix mode.
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:9297: CRC error counter=0
main.c:9312: set command mode to VIL
main.c:9384:
--- check asic number
main.c:9481: After Get ASIC NUM CRC error counter=0
main.c:9504: set_baud=0
main.c:10423: The min freq=700
main.c:10425: set real timeout 52, need sleep=379392
main.c:12545: After TEST CRC error counter=0
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:13954: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:583: single_board_frq_tuning enter
board_frq_tuning.c:584: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:127: force_freq not set, don't need tuning
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:14332: restart Miner chance num=5
main.c:14372: waiting for receive_func to exit!
main.c:14386: waiting for pic heart to exit!
main.c:13645: bmminer not found= 1378 root 0:00 grep bmminer
main.c:14430: bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Tue May 22 20:08:17 CST 2018 type: Antminer S9i
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8018f5ca4e104814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5760
get fan[2] speed=5760
get fan[2] speed=5760
get fan[5] speed=5760
get fan[2] speed=5760
get fan[5] speed=5760
get fan[2] speed=5760
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=910
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=910
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=870 [125]
Chain[J6] get working chain_voltage_pic=125
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=910 [57]
Chain[J7] get working chain_voltage_pic=57
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=910 [57]
Chain[J8] get working chain_voltage_pic=57
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s
Miner fix freq ...
max freq = 100
set baud=1
driver-btm-c5.c:15225:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=187 total_tv_end_sys=188
driver-btm-c5.c:10403:read_temp_func: last_testpatten_highest_pcb_temp = -100
restartNum = 5 , auto-reinit enabled...
do read_temp_func once...
Done check_asic_reg
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 6
read_temp_func Done!
CRC error counter=0
Hostname antMiner
Model GNU/Linux
Hardware Version 22.0.1.3
Kernel Version Linux 3.14.0-xilinx-ge8a2f71-dirty #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
File System Version Tue May 22 20:08:17 CST 2018
Logic Version S9i_VTest
BMminer Version 2.0.0
Uptime 12
Load Average 0.53, 0.23, 0.10
main.c:13690: log_level = 4
main.c:13717: This is XILINX board. Totalram: 507527168
main.c:13729: Detect 512MB control board of XILINX
driver-bitmain.c:1003: forceFreq=-1 forceFlag=0
main.c:8280: DETECT HW version=0000c516
main.c:13756: miner ID : 8018f5ca4e104814
main.c:13781: Miner Type = S9
main.c:13793: AsicType = 1387
main.c:13796: real AsicNum = 63
main.c:13889: use critical mode to search freq...
driver-bitmain.c:2401: get PLUG ON=0x000000e0
driver-bitmain.c:2471: Find hashboard on Chain[5]
driver-bitmain.c:2471: Find hashboard on Chain[6]
driver-bitmain.c:2471: Find hashboard on Chain[7]
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
main.c:2049: Check chain[5] PIC fw version=0x03
main.c:2049: Check chain[6] PIC fw version=0x03
main.c:2049: Check chain[7] PIC fw version=0x03
main.c:8664: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8706: has freq in PIC, will disable freq setting.
main.c:8805: chain[5] has freq in PIC and will jump over...
main.c:8809: Chain[5] has core num in PIC
main.c:8819: Chain[5] ASIC[17] has core num=4
main.c:2049: Check chain[5] PIC fw version=0x03
main.c:8664: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8706: has freq in PIC, will disable freq setting.
main.c:8805: chain[6] has freq in PIC and will jump over...
main.c:8809: Chain[6] has core num in PIC
main.c:2049: Check chain[6] PIC fw version=0x03
main.c:8664: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:8706: has freq in PIC, will disable freq setting.
main.c:8805: chain[7] has freq in PIC and will jump over...
main.c:8809: Chain[7] has core num in PIC
main.c:2049: Check chain[7] PIC fw version=0x03
main.c:8883: get PIC voltage=6 on chain[5], value=940
main.c:8883: get PIC voltage=6 on chain[6], value=940
main.c:8883: get PIC voltage=6 on chain[7], value=940
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:9046: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9063: chain[5] temp chip I2C addr=0x98
main.c:9069: chain[5] has no middle temp, use special fix mode.
main.c:9046: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9063: chain[6] temp chip I2C addr=0x98
main.c:9069: chain[6] has no middle temp, use special fix mode.
main.c:9046: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9063: chain[7] temp chip I2C addr=0x98
main.c:9069: chain[7] has no middle temp, use special fix mode.
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:9297: CRC error counter=0
main.c:9312: set command mode to VIL
main.c:9384:
--- check asic number
main.c:9481: After Get ASIC NUM CRC error counter=0
main.c:9504: set_baud=0
main.c:10423: The min freq=700
main.c:10425: set real timeout 52, need sleep=379392
main.c:12545: After TEST CRC error counter=0
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:13954: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:583: single_board_frq_tuning enter
board_frq_tuning.c:584: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:127: force_freq not set, don't need tuning
driver-bitmain.c:1840: set_reset_allhashboard = 0x0000ffff
driver-bitmain.c:1840: set_reset_allhashboard = 0x00000000
main.c:14332: restart Miner chance num=5
main.c:14372: waiting for receive_func to exit!
main.c:14386: waiting for pic heart to exit!
main.c:13645: bmminer not found= 1378 root 0:00 grep bmminer
main.c:14430: bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Tue May 22 20:08:17 CST 2018 type: Antminer S9i
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8018f5ca4e104814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5760
get fan[2] speed=5760
get fan[2] speed=5760
get fan[5] speed=5760
get fan[2] speed=5760
get fan[5] speed=5760
get fan[2] speed=5760
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=910
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=910
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=870 [125]
Chain[J6] get working chain_voltage_pic=125
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=910 [57]
Chain[J7] get working chain_voltage_pic=57
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=910 [57]
Chain[J8] get working chain_voltage_pic=57
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s
Miner fix freq ...
max freq = 100
set baud=1
driver-btm-c5.c:15225:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=187 total_tv_end_sys=188
driver-btm-c5.c:10403:read_temp_func: last_testpatten_highest_pcb_temp = -100
restartNum = 5 , auto-reinit enabled...
do read_temp_func once...
Done check_asic_reg
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 6
read_temp_func Done!
CRC error counter=0
Jump to: