Topic: S9J Hashboard not showed up (Read 109 times)

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06e8cf4   (7044 kB)
[    0.000000]       .init : 0xc06e9000 - 0xc071d480   ( 210 kB)
[    0.000000]       .data : 0xc071e000 - 0xc0767058   ( 293 kB)
[    0.000000]        .bss : 0xc0767064 - 0xc07a7d64   ( 260 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000296] ps7-ttc #0 at df804000, irq=43
[    0.000599] Console: colour dummy device 80x30
[    0.000629] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040200] pid_max: default: 32768 minimum: 301
[    0.040407] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040426] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042622] CPU: Testing write buffer coherency: ok
[    0.042944] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043002] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[    0.043221] L310 cache controller enabled
[    0.043240] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120991] CPU1: Booted secondary processor
[    0.210220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210352] Brought up 2 CPUs
[    0.210370] SMP: Total of 2 processors activated.
[    0.210378] CPU: All CPU(s) started in SVC mode.
[    0.211044] devtmpfs: initialized
[    0.213489] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214691] regulator-dummy: no parameters
[    0.221759] NET: Registered protocol family 16
[    0.223929] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226210] cpuidle: using governor ladder
[    0.226223] cpuidle: using governor menu
[    0.233635] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235162] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235176] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235285] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257606] bio: create slab  at 0
[    0.258991] vgaarb: loaded
[    0.259681] SCSI subsystem initialized
[    0.260690] usbcore: registered new interface driver usbfs
[    0.260863] usbcore: registered new interface driver hub
[    0.261101] usbcore: registered new device driver usb
[    0.261638] media: Linux media interface: v0.10
[    0.261796] Linux video capture interface: v2.00
[    0.262045] pps_core: LinuxPPS API ver. 1 registered
[    0.262057] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.262179] PTP clock support registered
[    0.262541] EDAC MC: Ver: 3.0.0
[    0.263590] Advanced Linux Sound Architecture Driver Initialized.
[    0.266380] DMA-API: preallocated 4096 debug entries
[    0.266393] DMA-API: debugging enabled by kernel config
[    0.266466] Switched to clocksource arm_global_timer
[    0.286912] NET: Registered protocol family 2
[    0.287568] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287626] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287710] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287759] TCP: reno registered
[    0.287776] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287807] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288036] NET: Registered protocol family 1
[    0.288375] RPC: Registered named UNIX socket transport module.
[    0.288387] RPC: Registered udp transport module.
[    0.288396] RPC: Registered tcp transport module.
[    0.288404] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288417] PCI: CLS 0 bytes, default 64
[    0.288845] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290847] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292942] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293142] msgmni has been set to 967
[    0.293918] io scheduler noop registered
[    0.293931] io scheduler deadline registered
[    0.293972] io scheduler cfq registered (default)
[    0.302233] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.302254] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.427048] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.994220] console [ttyPS0] enabled
[    0.998491] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.006094] [drm] Initialized drm 1.1.0 20060810
[    1.023200] brd: module loaded
[    1.032564] loop: module loaded
[    1.042004] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.047992] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.055726] libphy: XEMACPS mii bus: probed
[    1.060124] ------------- phy_id = 0x3625e62
[    1.064829] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.073709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.080541] ehci-pci: EHCI PCI platform driver
[    1.087776] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.094566] usbcore: registered new interface driver usb-storage
[    1.101436] mousedev: PS/2 mouse device common for all mice
[    1.107542] i2c /dev entries driver
[    1.114433] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.119955] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.125835] Xilinx Zynq CpuIdle Driver started
[    1.130712] sdhci: Secure Digital Host Controller Interface driver
[    1.136856] sdhci: Copyright(c) Pierre Ossman
[    1.141147] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.147961] mmc0: no vqmmc regulator found
[    1.151974] mmc0: no vmmc regulator found
[    1.196502] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205188] usbcore: registered new interface driver usbhid
[    1.210704] usbhid: USB HID core driver
[    1.215397] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221688] nand: Micron MT29F2G08ABAEAWP
[    1.225658] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231617] Bad block table found at page 131008, version 0x01
[    1.237866] Bad block table found at page 130944, version 0x01
[    1.243919] 3 ofpart partitions found on MTD device pl353-nand
[    1.249696] Creating 3 MTD partitions on "pl353-nand":
[    1.254798] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262860] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270193] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.278934] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[    1.285459] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.290780] TCP: cubic registered
[    1.294014] NET: Registered protocol family 17
[    1.298716] Registering SWP/SWPB emulation handler
[    1.304607] regulator-dummy: disabling
[    1.308976] UBI: attaching mtd1 to ubi0
[    1.836571] UBI: scanning is finished
[    1.848230] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.855279] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.862075] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.868752] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.875589] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.881600] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.888710] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 408383306
[    1.897653] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.906870] UBI: background thread "ubi_bgt0d" started, PID 1085
[    1.906876] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.910894] ALSA device list:
[    1.910897]   No soundcards found.
[    1.927230] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[    1.956202] UBIFS: recovery needed
[    2.887546] UBIFS: recovery completed
[    2.891229] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.897174] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.906270] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.916172] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.921212] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 3AB50DA4-F7D1-4711-9EEE-D3D8DA845970, small LPT model
[    2.932286] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.939021] devtmpfs: mounted
[    2.942161] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[    3.795732] random: dd urandom read with 0 bits of entropy available
[    4.216495] 
[    4.216495] bcm54xx_config_init
[    5.286534] 
[    5.286534] bcm54xx_config_init
[    8.287337] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.293431] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   26.319819] In axi fpga driver!
[   26.322972] request_mem_region OK!
[   26.326336] AXI fpga dev virtual address is 0xdf9fc000
[   26.331407] *base_vir_addr = 0xc51e
[   26.347213] In fpga mem driver!
[   26.350278] request_mem_region OK!
[   26.353841] fpga mem virtual address is 0xe2000000
[   27.155875] 
[   27.155875] bcm54xx_config_init
[   28.255760] 
[   28.255760] bcm54xx_config_init
[   31.256297] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   31.262315] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  555.482116] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507424768
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f8d000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d86000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 811095841540881c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[0] has core num=1
main.c:9113: Chain[5] ASIC[1] has core num=2
main.c:9113: Chain[5] ASIC[2] has core num=3
main.c:9113: Chain[5] ASIC[3] has core num=1
main.c:9113: Chain[5] ASIC[4] has core num=1
main.c:9113: Chain[5] ASIC[5] has core num=1
main.c:9113: Chain[5] ASIC[6] has core num=1
main.c:9113: Chain[5] ASIC[7] has core num=1
main.c:9113: Chain[5] ASIC[8] has core num=1
main.c:9113: Chain[5] ASIC[9] has core num=2
main.c:9113: Chain[5] ASIC[10] has core num=1
main.c:9113: Chain[5] ASIC[11] has core num=1
main.c:9113: Chain[5] ASIC[12] has core num=1
main.c:9113: Chain[5] ASIC[13] has core num=1
main.c:9113: Chain[5] ASIC[14] has core num=1
main.c:9113: Chain[5] ASIC[15] has core num=2
main.c:9113: Chain[5] ASIC[17] has core num=1
main.c:9113: Chain[5] ASIC[18] has core num=2
main.c:9113: Chain[5] ASIC[19] has core num=2
main.c:9113: Chain[5] ASIC[20] has core num=1
main.c:9113: Chain[5] ASIC[21] has core num=1
main.c:9113: Chain[5] ASIC[22] has core num=1
main.c:9113: Chain[5] ASIC[23] has core num=1
main.c:9113: Chain[5] ASIC[24] has core num=1
main.c:9113: Chain[5] ASIC[25] has core num=2
main.c:9113: Chain[5] ASIC[26] has core num=2
main.c:9113: Chain[5] ASIC[27] has core num=1
main.c:9113: Chain[5] ASIC[28] has core num=1
main.c:9113: Chain[5] ASIC[29] has core num=1
main.c:9113: Chain[5] ASIC[30] has core num=1
main.c:9113: Chain[5] ASIC[31] has core num=2
main.c:9113: Chain[5] ASIC[32] has core num=1
main.c:9113: Chain[5] ASIC[33] has core num=1
main.c:9113: Chain[5] ASIC[34] has core num=1
main.c:9113: Chain[5] ASIC[35] has core num=3
main.c:9113: Chain[5] ASIC[36] has core num=1
main.c:9113: Chain[5] ASIC[37] has core num=1
main.c:9113: Chain[5] ASIC[38] has core num=1
main.c:9113: Chain[5] ASIC[39] has core num=1
main.c:9113: Chain[5] ASIC[40] has core num=3
main.c:9113: Chain[5] ASIC[41] has core num=2
main.c:9113: Chain[5] ASIC[42] has core num=2
main.c:9113: Chain[5] ASIC[43] has core num=1
main.c:9113: Chain[5] ASIC[44] has core num=1
main.c:9113: Chain[5] ASIC[45] has core num=1
main.c:9113: Chain[5] ASIC[46] has core num=2
main.c:9113: Chain[5] ASIC[47] has core num=1
main.c:9113: Chain[5] ASIC[48] has core num=1
main.c:9113: Chain[5] ASIC[49] has core num=2
main.c:9113: Chain[5] ASIC[50] has core num=1
main.c:9113: Chain[5] ASIC[51] has core num=1
main.c:9113: Chain[5] ASIC[52] has core num=1
main.c:9113: Chain[5] ASIC[53] has core num=1
main.c:9113: Chain[5] ASIC[54] has core num=1
main.c:9113: Chain[5] ASIC[55] has core num=3
main.c:9113: Chain[5] ASIC[58] has core num=1
main.c:9113: Chain[5] ASIC[59] has core num=5
main.c:9113: Chain[5] ASIC[60] has core num=1
main.c:9113: Chain[5] ASIC[61] has core num=2
main.c:9113: Chain[5] ASIC[62] has core num=1
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[16] has core num=1
main.c:9113: Chain[7] ASIC[43] has core num=1
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=91 on chain[5], value=890
main.c:9183: get PIC voltage=108 on chain[6], value=880
main.c:9183: get PIC voltage=57 on chain[7], value=910
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1844 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
main.c:13927: bmminer not found=14757 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
main.c:13927: bmminer not found=30749 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:56:49 CST 2019 type: Antminer S9j
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 811095841540881c
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5280
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5400
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5280
driver-btm-c5.c:13148:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x48 0x00 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x01 0x48 0x01 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x0f 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J6] has backup chain_voltage=890
driver-btm-c5.c:13228:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x03 0x4f 0x01 0x4f 0x01 0x4f 0x05 0x4f 0x01 0x4f 0x03 0x4f 0x01 0x4f 0x05 0x4f 0x08 0x4f 0x23 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 0x00 0x4f 
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J7] has backup chain_voltage=880
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x0a 0x47 0x0b 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x01 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x09 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=1 : 1
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J8] has backup chain_voltage=890
driver-btm-c5.c:13228:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12237:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=74 value=900
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=900
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J6] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J6] get working chain_voltage_pic=91
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=57 value=910
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J7] original chain_voltage_value=880 adjusted chain_voltage_value:880, value=910
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=880 [108]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=108
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=57 value=910
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J8] original chain_voltage_value=890 adjusted chain_voltage_value:890, value=910
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=91
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J7] has 63 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:4543:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[0] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[1] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[2] has core num=3
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[3] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[4] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[5] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[6] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[7] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[8] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[9] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[10] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[11] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[12] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[13] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[14] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[15] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[17] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[18] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[19] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[20] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[21] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[22] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[23] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[24] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[25] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[26] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[27] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[28] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[29] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[30] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[31] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[32] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[33] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[34] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[35] has core num=3
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[36] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[37] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[38] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[39] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[40] has core num=3
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[41] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[42] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[43] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[44] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[45] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[46] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[47] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[48] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[49] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[50] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[51] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[52] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[53] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[54] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[55] has core num=3
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[58] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[59] has core num=5
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[60] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[61] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[62] has core num=1
driver-btm-c5.c:4543:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:4583:set_frequency: miner total rate=9411GH/s ideal_total_hash_rate = 9000GH/s
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4610:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:5 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637 
driver-btm-c5.c:4821:set_frequency: Chain:5 max freq=637
driver-btm-c5.c:4822:set_frequency: Chain:5 min freq=637

driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[6]
driver-btm-c5.c:4610:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:6 base freq=100
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681 
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681 
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681 
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681 
driver-btm-c5.c:4821:set_frequency: Chain:6 max freq=681
driver-btm-c5.c:4822:set_frequency: Chain:6 min freq=681


driver-btm-c5.c:4831:set_frequency: Miner fix freq ...
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4867:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:5 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637 
driver-btm-c5.c:5122:set_frequency: Chain:5 max freq=637
driver-btm-c5.c:5123:set_frequency: Chain:5 min freq=637

driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[6]
driver-btm-c5.c:4867:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:6 base freq=100
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681 
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681 
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681 
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681 
driver-btm-c5.c:5122:set_frequency: Chain:6 max freq=681
driver-btm-c5.c:5123:set_frequency: Chain:6 min freq=681

driver-btm-c5.c:5131:set_frequency: max freq = 681
driver-btm-c5.c:4149:ProcessFixFreq: totalRate = 9411, fixed_totalRate = 9000
driver-btm-c5.c:9614:init_uart_baud: set baud=1
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:10 remote:11 offset:27 
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
driver-btm-c5.c:6647:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:10 remote:11 offset:27 
driver-btm-c5.c:6765:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 880
driver-btm-c5.c:14027:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=9818 total_tv_end_sys=9819
driver-btm-c5.c:10330:check_system_work: restartNum = 2 , auto-reinit enabled...
util.c:3207:initiate_stratum: mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/13500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 1, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/13500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 2, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/13500"]}
driver-btm-c5.c:8738:read_temp_func: bring_up_pcb_temp = 21
driver-btm-c5.c:9897:if_avg_hash_ok: avg hash rate = 9214.086752, ideal hash rate = 9000
driver-btm-c5.c:10415:check_system_work: hash rate is ok now
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 9469, ideal_total_hash_rate = 9000
driver-btm-c5.c:10257:check_avg_rate: adjust steps = 0
driver-btm-c5.c:10112:down_freq_n_steps: down_freq_n_steps chain[5] steps = 0
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637 
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637 
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637 
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637 
driver-btm-c5.c:10149:down_freq_n_steps: max freq = 637
driver-btm-c5.c:10151:down_freq_n_steps: dev->timeout = 692
driver-btm-c5.c:10169:down_freq_n_steps: dev->timeout = 740
driver-btm-c5.c:10112:down_freq_n_steps: down_freq_n_steps chain[6] steps = 0
Asic[ 0]:681 Asic[ 1]:681 Asic[ 2]:681 Asic[ 3]:681 Asic[ 4]:681 Asic[ 5]:681 Asic[ 6]:681 Asic[ 7]:681 
Asic[ 8]:681 Asic[ 9]:681 Asic[10]:681 Asic[11]:681 Asic[12]:681 Asic[13]:681 Asic[14]:681 Asic[15]:681 
Asic[16]:681 Asic[17]:681 Asic[18]:681 Asic[19]:681 Asic[20]:681 Asic[21]:681 Asic[22]:681 Asic[23]:681 
Asic[24]:681 Asic[25]:681 Asic[26]:681 Asic[27]:681 Asic[28]:681 Asic[29]:681 Asic[30]:681 Asic[31]:681 
Asic[32]:681 Asic[33]:681 Asic[34]:681 Asic[35]:681 Asic[36]:681 Asic[37]:681 Asic[38]:681 Asic[39]:681 
Asic[40]:681 Asic[41]:681 Asic[42]:681 Asic[43]:681 Asic[44]:681 Asic[45]:681 Asic[46]:681 Asic[47]:681 
Asic[48]:681 Asic[49]:681 Asic[50]:681 Asic[51]:681 Asic[52]:681 Asic[53]:681 Asic[54]:681 Asic[55]:681 
Asic[56]:681 Asic[57]:681 Asic[58]:681 Asic[59]:681 Asic[60]:681 Asic[61]:681 Asic[62]:681 
driver-btm-c5.c:10149:down_freq_n_steps: max freq = 681
driver-btm-c5.c:10151:down_freq_n_steps: dev->timeout = 740
driver-btm-c5.c:10169:down_freq_n_steps: dev->timeout = 692
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 9462, ideal_total_hash_rate = 9000
driver-btm-c5.c:10257:check_avg_rate: adjust steps = 1
driver-btm-c5.c:10112:down_freq_n_steps: down_freq_n_steps chain[5] steps = 1
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 
Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 
Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 
Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 
Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 
Asic[56]:631 Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631 
driver-btm-c5.c:10149:down_freq_n_steps: max freq = 631
driver-btm-c5.c:10151:down_freq_n_steps: dev->timeout = 692
driver-btm-c5.c:10169:down_freq_n_steps: dev->timeout = 747
driver-btm-c5.c:10112:down_freq_n_steps: down_freq_n_steps chain[6] steps = 1
Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 
Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 
Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 
Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 
Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 
Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 
Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 
Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675 
driver-btm-c5.c:10149:down_freq_n_steps: max freq = 675
driver-btm-c5.c:10151:down_freq_n_steps: dev->timeout = 747
driver-btm-c5.c:10169:down_freq_n_steps: dev->timeout = 698
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 9451, ideal_total_hash_rate = 9000
driver-btm-c5.c:10257:check_avg_rate: adjust steps = 1
driver-btm-c5.c:10112:down_freq_n_steps: down_freq_n_steps chain[5] steps = 1
Asic[ 0]:625 Asic[ 1]:625 Asic[ 2]:625 Asic[ 3]:625 Asic[ 4]:625 Asic[ 5]:625 Asic[ 6]:625 Asic[ 7]:625 
Asic[ 8]:625 Asic[ 9]:625 Asic[10]:625 Asic[11]:625 Asic[12]:625 Asic[13]:625 Asic[14]:625 Asic[15]:625 
Asic[16]:625 Asic[17]:625 Asic[18]:625 Asic[19]:625 Asic[20]:625 Asic[21]:625 Asic[22]:625 Asic[23]:625 
Asic[24]:625 Asic[25]:625 Asic[26]:625 Asic[27]:625 Asic[28]:625 Asic[29]:625 Asic[30]:625 Asic[31]:625 
Asic[32]:625 Asic[33]:625 Asic[34]:625 Asic[35]:625 Asic[36]:625 Asic[37]:625 Asic[38]:625 Asic[39]:625 
Asic[40]:625 Asic[41]:625 Asic[42]:625 Asic[43]:625 Asic[44]:625 Asic[45]:625 Asic[46]:625 Asic[47]:625 
Asic[48]:625 Asic[49]:625 Asic[50]:625 Asic[51]:625 Asic[52]:625 Asic[53]:625 Asic[54]:625 Asic[55]:625 
Asic[56]:625 Asic[57]:625 Asic[58]:625 Asic[59]:625 Asic[60]:625 Asic[61]:625 Asic[62]:625 
driver-btm-c5.c:10149:down_freq_n_steps: max freq = 625
driver-btm-c5.c:10151:down_freq_n_steps: dev->timeout = 698
driver-btm-c5.c:10169:down_freq_n_steps: dev->timeout = 754
driver-btm-c5.c:10112:down_freq_n_steps: down_freq_n_steps chain[6] steps = 1
Asic[ 0]:668 Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:668 Asic[ 4]:668 Asic[ 5]:668 Asic[ 6]:668 Asic[ 7]:668 
Asic[ 8]:668 Asic[ 9]:668 Asic[10]:668 Asic[11]:668 Asic[12]:668 Asic[13]:668 Asic[14]:668 Asic[15]:668 
Asic[16]:668 Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Asic[23]:668 
Asic[24]:668 Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668 
Asic[32]:668 Asic[33]:668 Asic[34]:668 Asic[35]:668 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668 
Asic[40]:668 Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Asic[47]:668 
Asic[48]:668 Asic[49]:668 Asic[50]:668 Asic[51]:668 Asic[52]:668 Asic[53]:668 Asic[54]:668 Asic[55]:668 
Asic[56]:668 Asic[57]:668 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668 
driver-btm-c5.c:10149:down_freq_n_steps: max freq = 668
driver-btm-c5.c:10151:down_freq_n_steps: dev->timeout = 754
driver-btm-c5.c:10169:down_freq_n_steps: dev->timeout = 705
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 9409, ideal_total_hash_rate = 9000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 9361, ideal_total_hash_rate = 9000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 9331, ideal_total_hash_rate = 9000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 9327, ideal_total_hash_rate = 9000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 9310, ideal_total_hash_rate = 9000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 9315, ideal_total_hash_rate = 9000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10210:check_avg_rate: avg_rate = 9315, ideal_total_hash_rate = 9000
driver-btm-c5.c:10215:check_avg_rate: avg hash rate is OK
util.c:3207:initiate_stratum: mining.subscribe:{"id": 17770, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9j/13500", "00"]}
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=75.8160 Asic[02]=76.1850 Asic[03]=71.2360 Asic[04]=79.4230 Asic[05]=72.4940 Asic[06]=75.5810 Asic[07]=72.3260 Asic[08]=72.0410 
Asic[09]=70.9170 Asic[10]=75.9330 Asic[11]=68.7360 Asic[12]=70.7660 Asic[13]=67.3940 Asic[14]=70.1110 Asic[15]=66.3870 Asic[16]=67.8800 
Asic[17]=70.2120 Asic[18]=74.3390 Asic[19]=64.7760 Asic[20]=68.1650 Asic[21]=72.5270 Asic[22]=73.6680 Asic[23]=72.2090 Asic[24]=68.9370 
Asic[25]=68.4000 Asic[26]=68.4000 Asic[27]=68.4840 Asic[28]=70.6150 Asic[29]=69.3060 Asic[30]=70.8660 Asic[31]=68.4840 Asic[32]=67.4270 
Asic[33]=73.3830 Asic[34]=74.3230 Asic[35]=68.2830 Asic[36]=76.2860 Asic[37]=70.6990 Asic[38]=73.5840 Asic[39]=74.5070 Asic[40]=75.4970 
Asic[41]=72.3930 Asic[42]=74.2720 Asic[43]=66.5210 Asic[44]=75.0780 Asic[45]=68.8360 Asic[46]=66.4200 Asic[47]=69.6080 Asic[48]=75.4300 
Asic[49]=65.5310 Asic[50]=70.9670 Asic[51]=67.8800 Asic[52]=70.4130 Asic[53]=68.6520 Asic[54]=75.7490 Asic[55]=69.9270 Asic[56]=68.8030 
Asic[57]=67.0240 Asic[58]=73.0640 Asic[59]=69.2390 Asic[60]=72.1920 Asic[61]=70.6650 Asic[62]=73.7350 Asic[63]=71.9070 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=75.5980 Asic[02]=80.5300 Asic[03]=69.6250 Asic[04]=76.2690 Asic[05]=79.6410 Asic[06]=72.8130 Asic[07]=80.8320 Asic[08]=76.6880 
Asic[09]=82.3250 Asic[10]=81.0170 Asic[11]=77.0400 Asic[12]=69.5750 Asic[13]=66.7560 Asic[14]=74.8260 Asic[15]=80.1780 Asic[16]=77.4770 
Asic[17]=72.1250 Asic[18]=76.9400 Asic[19]=74.3560 Asic[20]=75.6980 Asic[21]=77.5940 Asic[22]=72.6280 Asic[23]=77.2590 Asic[24]=78.4330 
Asic[25]=74.8090 Asic[26]=74.7250 Asic[27]=61.0520 Asic[28]=72.6110 Asic[29]=75.1450 Asic[30]=74.5910 Asic[31]=79.0370 Asic[32]=70.4130 
Asic[33]=77.3090 Asic[34]=75.0940 Asic[35]=74.9600 Asic[36]=71.9400 Asic[37]=76.4700 Asic[38]=76.9570 Asic[39]=72.8460 Asic[40]=74.5240 
Asic[41]=75.0100 Asic[42]=75.1780 Asic[43]=71.7890 Asic[44]=76.7050 Asic[45]=77.7280 Asic[46]=79.1210 Asic[47]=80.0100 Asic[48]=79.1380 
Asic[49]=74.5070 Asic[50]=70.3800 Asic[51]=77.7120 Asic[52]=75.7320 Asic[53]=73.4670 Asic[54]=77.1410 Asic[55]=74.0710 Asic[56]=78.3320 
Asic[57]=80.3790 Asic[58]=76.2350 Asic[59]=75.7650 Asic[60]=77.2920 Asic[61]=76.5540 Asic[62]=83.8020 Asic[63]=76.4870 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=54
Chain[5] Chip[62] junction temperature=60
Special fix Chain[5] Chip[62] middle Temp = 69
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=49
Chain[6] Chip[62] junction temperature=57
Special fix Chain[6] Chip[62] middle Temp = 64
Done read temp on Chain[6]
Max pcb temp : 54
set FAN speed according to: temp_highest=54 temp_top1[PWM_T]=54 temp_top1[TEMP_POS_LOCAL]=54 temp_change=1 fix_fan_steps=0
FAN PWM: 56
read_temp_func Done!
CRC error counter=7449