Topic: [SALE] Bitcoin Penny™ Manhole Cover Prototype | Antique Copper (Read 303 times)
So? what is the bid up to for the PROTOTYPE?
January 18, 2018, 04:59:30 PM
It'll blend into the BP paved roads a bit. Perhaps if there were a good contrasting release with which to pave. 
Where those silver pennies at?!
Where those silver pennies at?!Maybe some war on fiat pennies, a la 1944 steel
If you have a 1944 steel penny they are worth around 100,000 USD as they are a rare error. The 1943 penny was issued for circulation in steel, in 1944 they returned to traditional copper.
Well if its not an error coin who wants it
Whoopsie! LC on top of everything. I was truly hoping you had one of the 1944 steelies as there are some out there!
January 18, 2018, 04:48:03 PM
It'll blend into the BP paved roads a bit. Perhaps if there were a good contrasting release with which to pave. Where those silver pennies at?!
Where those silver pennies at?!Maybe some war on fiat pennies, a la 1944 steel
If you have a 1944 steel penny they are worth around 100,000 USD as they are a rare error. The 1943 penny was issued for circulation in steel, in 1944 they returned to traditional copper.
Well if its not an error coin who wants it
Whoopsie! LC on top of everything. January 18, 2018, 04:38:10 PM
During our first year of BP (2015), we only minted the CJB mint mark. Before we released our 2016 coins, we had read about the hobby of coin roll hunting. We bought a few old one cent rolls and gave it a try ourselves. We were instantly amazed at all the little rare discoveries, and thought it might be a lot of fun to add a rare mint marked coin into every BP coin roll. That's the story behind the rare SN mint marked coins that we now hide inside every roll!
Here are a few of the coins we found in our coin roll hunting experiments, including a few indian heads, lots of old wheats, a mercury dime, some kind of old red plastic token, and two steel pennies!
Regards,
Chris
Here are a few of the coins we found in our coin roll hunting experiments, including a few indian heads, lots of old wheats, a mercury dime, some kind of old red plastic token, and two steel pennies!
Regards,
Chris
Really cool to see how the coins tone so differently depending on what type of environment they lived in. Great photo and searching thru change for oddities can be both fun and rewarding.
January 18, 2018, 04:32:42 PM
During our first year of BP (2015), we only minted the CJB mint mark. Before we released our 2016 coins, we had read about the hobby of coin roll hunting. We bought a few old one cent rolls and gave it a try ourselves. We were instantly amazed at all the little rare discoveries, and thought it might be a lot of fun to add a rare mint marked coin into every BP coin roll. That's the story behind the rare SN mint marked coins that we now hide inside every roll!
Here are a few of the coins we found in our coin roll hunting experiments, including a few indian heads, lots of old wheats, a mercury dime, some kind of old red plastic token, and two steel pennies!
Regards,
Chris
Here are a few of the coins we found in our coin roll hunting experiments, including a few indian heads, lots of old wheats, a mercury dime, some kind of old red plastic token, and two steel pennies!
Regards,
Chris
January 18, 2018, 04:15:57 PM
It'll blend into the BP paved roads a bit. Perhaps if there were a good contrasting release with which to pave. Where those silver pennies at?!
Where those silver pennies at?!Maybe some war on fiat pennies, a la 1944 steel
If you have a 1944 steel penny they are worth around 100,000 USD as they are a rare error. The 1943 penny was issued for circulation in steel, in 1944 they returned to traditional copper.
wow more error coin love!! has writing got everyone on it today??
Chris - sent you a message on this beauty bud
January 18, 2018, 04:14:31 PM
It'll blend into the BP paved roads a bit. Perhaps if there were a good contrasting release with which to pave. Where those silver pennies at?!
Where those silver pennies at?!Maybe some war on fiat pennies, a la 1944 steel
If you have a 1944 steel penny they are worth around 100,000 USD as they are a rare error. The 1943 penny was issued for circulation in steel, in 1944 they returned to traditional copper.
January 18, 2018, 03:33:47 PM
Maybe some war on fiat pennies, a la 1944 steel
Steel BPs would be kind of cool. LOL
Regards,
Chris
January 18, 2018, 03:29:07 PM
It'll blend into the BP paved roads a bit. Perhaps if there were a good contrasting release with which to pave. Where those silver pennies at?!
Where those silver pennies at?!Maybe some war on fiat pennies, a la 1944 steel
legendary
Activity: 2520
Merit: 3238
The Stone the masons rejected was the cornerstone.
January 18, 2018, 02:05:18 PM
you know some of the deviants in here love a decent backside!
And THAT makes us deviants. *scoff*
Aight, show us that manhole cover obverse!
Glad you are bringing yourself into the deviant group... but I was actually talking about Krog and Buck!
Hmmm....yes we must see the back side....Deviant member here!
January 18, 2018, 02:03:30 PM
Further question. so this isnt of the 10, nore the FS, will it be marked prototype? or P1? is it a 1/1
This one will be hand-stamped with PROTO. No need for 1/1 in my opinion, but it does sound like a fun idea. Why not?
UPDATE: The copper prototype manhole cover is now SOLD.
Thank you again to everyone for your enthusiastic support for our little company and it's crazy projects! And remember, our new 2018 JULIE coins will be here in just a few short weeks! This is going to be our most exciting year yet, and it's all because of wonderful people like YOU!
Regards,
Chris
January 18, 2018, 12:28:37 PM
Funny you should say that, Ticked. This summer, we are planning to announce our TOP SECRET Summer Project for 2018 -- a matching paved road! The new concrete road is only 100 meters long due to obvious shipping issues, but it's still long enough to drive back and forth upon in plenty of Bitcoin Penny style!
Regards,
Chris
Regards,
Chris
Shipping a road, can't wait to see this one.
The problem isn't shipping the road, it's finding the 20m x 20m postage stamp.
Regards,
Me
I have my doubts, but dammit i hope this is real hahahaha
The antiqued copper finish is a high quality powder coat onto the cast iron manhole cover. Here's a quick indoor photo of the unassembled reverse side. (Outdoor photos in direct sunlight show the antiqued copper finish much better, IMO.)
Dat ass
Could easily bounce a Further question. so this isnt of the 10, nore the FS, will it be marked prototype? or P1? is it a 1/1
January 18, 2018, 12:28:00 PM
This looks nice! Can we get pics of the wooden frame/stand?
Think kickstand. it will likely not be visible.
January 18, 2018, 12:27:30 PM
Funny you should say that, Ticked. This summer, we are planning to announce our TOP SECRET Summer Project for 2018 -- a matching paved road! The new concrete road is only 100 meters long due to obvious shipping issues, but it's still long enough to drive back and forth upon in plenty of Bitcoin Penny style!
Regards,
Chris
Regards,
Chris
Shipping a road, can't wait to see this one.
The problem isn't shipping the road, it's finding the 20m x 20m postage stamp.
Regards,
Me
January 18, 2018, 12:23:39 PM
Funny you should say that, Ticked. This summer, we are planning to announce our TOP SECRET Summer Project for 2018 -- a matching paved road! The new concrete road is only 100 meters long due to obvious shipping issues, but it's still long enough to drive back and forth upon in plenty of Bitcoin Penny style!
Regards,
Chris
Regards,
Chris
Shipping a road, can't wait to see this one.
January 18, 2018, 12:20:40 PM
Damn! That is a beauty!
IS that pure copper or just the coating?
If it is a coating, does it also cover the reverse side? Can we see a photo of that side too please?
Thanks bro!
IS that pure copper or just the coating?
If it is a coating, does it also cover the reverse side? Can we see a photo of that side too please?
Thanks bro!
The antiqued copper finish is a high quality powder coat onto the cast iron manhole cover. Here's a quick indoor photo of the unassembled reverse side. (Outdoor photos in direct sunlight show the antiqued copper finish much better, IMO.)
Once assembled, the smooth copper backplate will be hand-stamped with PROTO, much like how our factory seconds are stamped FS1, FS2, and FS3. (The PROTO will not be assembled until it's sold, since we don't know yet if it will require a privkey, funding, etc.)
is this loaded? is this the same weight as the other ones you were selling bud?
Only the actual Limited Edition Manhole Covers (Nos.1-10) are pre-loaded with .01 BTC. However, I am happy to pre-load the PROTO upon request.
It'll blend into the BP paved roads a bit. Perhaps if there were a good contrasting release with which to pave.
Funny you should say that, Ticked. This summer, we are planning to announce our TOP SECRET Summer Project for 2018 -- a matching paved road! The new concrete road is only 100 meters long due to obvious shipping issues, but it's still long enough to drive back and forth upon in plenty of Bitcoin Penny style!
Regards,
Chris
It'll blend into the BP paved roads a bit. Perhaps if there were a good contrasting release with which to pave. Where those silver pennies at?!
Where those silver pennies at?! you know some of the deviants in here love a decent backside!
And THAT makes us deviants. *scoff*
Aight, show us that manhole cover obverse!
Glad you are bringing yourself into the deviant group... but I was actually talking about Krog and Buck!
If you ain't asking for the uh...item... to give a good 360* turn who really knows what you are getting involved with
you know some of the deviants in here love a decent backside!
And THAT makes us deviants. *scoff*
Aight, show us that manhole cover obverse!
Glad you are bringing yourself into the deviant group... but I was actually talking about Krog and Buck!
you know some of the deviants in here love a decent backside!
And THAT makes us deviants. *scoff*
Aight, show us that manhole cover obverse!
dude.. can we see a picture of the other side.. you know some of the deviants in here love a decent backside!
is this loaded? is this the same weight as the other ones you were selling bud?
is this loaded? is this the same weight as the other ones you were selling bud?
Damn! That is a beauty!
IS that pure copper or just the coating?
If it is a coating, does it also cover the reverse side? Can we see a photo of that side too please?
Thanks bro!
IS that pure copper or just the coating?
If it is a coating, does it also cover the reverse side? Can we see a photo of that side too please?
Thanks bro!
Manhole Cover PROTOTYPE in an Antique Copper powder coat finish.
Now theres something. if this were also a copper bullion purchase. . .
Though, im not so sure copper makes for a truly applicable manhole cover, which is of course what we are all seeking legendary
Activity: 2520
Merit: 3238
The Stone the masons rejected was the cornerstone.
Damn! That is a beauty!
IS that pure copper or just the coating?
If it is a coating, does it also cover the reverse side? Can we see a photo of that side too please?
Thanks bro!
IS that pure copper or just the coating?
If it is a coating, does it also cover the reverse side? Can we see a photo of that side too please?
Thanks bro!
That is fkin EPIC!!
Love it!
Viz
Love it!
Viz
In order to gather extra funds for our many new and exciting projects this year, we're offering this one-of-a-kind Bitcoin Penny™ Manhole Cover PROTOTYPE in an Antique Copper powder coat finish. What more is there to say? It's a giant, coppery, crypto-coin collectible!
The price is BEST OFFER. Please feel free to PM your best offers, and we'll reply as soon as possible. (We launch our new 2018 products in a few weeks, so it's very busy around here at the moment!)
Comes with a complimentary, locally hand-crafted, solid hardwood, prop-style display stand.
Free shipping in the USA. Please inquire for international delivery.
Please feel free to ask questions.
Regards,
Chris
The price is BEST OFFER. Please feel free to PM your best offers, and we'll reply as soon as possible. (We launch our new 2018 products in a few weeks, so it's very busy around here at the moment!)
Comes with a complimentary, locally hand-crafted, solid hardwood, prop-style display stand.
Free shipping in the USA. Please inquire for international delivery.
Please feel free to ask questions.
Regards,
Chris
Jump to: