Don't let the fan run slowly, letting the VRMs and core reach high temperature (relatively speaking)
"gpu-fan" : "70-85,70-85",
"temp-cutoff" : "78",
"temp-overheat" : "72",
"temp-target" : "66",
Or the core clock is too high for the voltage. Lower the clock. Which clock do you run it at?
Topic: Scrypt - CPU1: Idle for more than 60 seconds, declaring SICK! [Bounty 0.05] (Read 2525 times)
January 28, 2014, 03:29:50 AM
January 28, 2014, 02:17:48 AM
Try a couple of things:
1. Restart your PC, run CPU-Z than run CGminer and follow the temp of GPU 1 - as it could be from overheating, if this is the case than find a way to cool your GPU (more fans, new thermal paste, etc).
2. If the problem persists, reinstall drivers.
1. Restart your PC, run CPU-Z than run CGminer and follow the temp of GPU 1 - as it could be from overheating, if this is the case than find a way to cool your GPU (more fans, new thermal paste, etc).
2. If the problem persists, reinstall drivers.
January 28, 2014, 01:56:32 AM
Bounty updated
January 27, 2014, 09:25:19 PM
Hi Guys.
I have a few Rigs and for the last few days i have been getting this error then CGMiner is crashing.
I am using windows 7 64 bit with 4gb ram and different makes/models of motherboards.
The GPU is Gigabyte R9 280x undervolted to 1075.
I have been looking/reading but i cant seem to figure it out. I have just modified the bat file i normally use and see if that helps. I will post a copy of that when i get home.
Can anything think of what else could be the problem?
I have a few Rigs and for the last few days i have been getting this error then CGMiner is crashing.
I am using windows 7 64 bit with 4gb ram and different makes/models of motherboards.
The GPU is Gigabyte R9 280x undervolted to 1075.
I have been looking/reading but i cant seem to figure it out. I have just modified the bat file i normally use and see if that helps. I will post a copy of that when i get home.
Can anything think of what else could be the problem?
Jump to: