It's a single rail, so while they might rate each cable at 150W that will not be the cause of it shutting down. Much more likely is that since it's an old crappy group regulated design, when you put a big draw on the 12V rail with no draw on the 5V rail both rails go out of voltage spec and the PSU shuts down.
I have a Corsair VX450w that's a great little supply and was highly rated in the budget segment in its day, but it does the same thing. It's one of the issues of a lot of cheaper 400-700W Bronze and lower PSUs.
Topic: sentey ERP 750 PS OVERLOAD WITH S1 ANTMINER? (Read 1200 times)
Well i guess i solved my problem with these ERP 750 WATT? , WELL IT TURNS OUT WE SENT AN EMAIL TO SENTEY AND THEY ARE SENDING US 6 UNITS OF A different model MBP750-HS becuase they claim thier web page is not explicit enough and might lead to some misunderstanding, 
bottom line- these socalled ERP 750 WATT units are only capable of 150 watt per line maximum 300 watt total , we consumers cannot read specifications or maybe i just passed thru life gaizing at the stars 
bottom line- these socalled ERP 750 WATT units are only capable of 150 watt per line maximum 300 watt total , we consumers cannot read specifications or maybe i just passed thru life gaizing at the stars Wow,piss poor PSU..........my Corsair 600 watters have handled 220 watts per 6pin PCIE cable (2 cables total),ran 1 S1 Antminer OC'ed for 3 months,not a wimper
I read the specs & saw no mention of such limitations on that ERP 750
Not many PSU's have a schematic available,not much help either,but you never know unless you have all the info
Good luck dude!!
Well i guess i solved my problem with these ERP 750 WATT? , WELL IT TURNS OUT WE SENT AN EMAIL TO SENTEY AND THEY ARE SENDING US 6 UNITS OF A different model MBP750-HS becuase they claim thier web page is not explicit enough and might lead to some misunderstanding, bottom line- these socalled ERP 750 WATT units are only capable of 150 watt per line maximum 300 watt total , we consumers cannot read specifications or maybe i just passed thru life gaizing at the stars
bottom line- these socalled ERP 750 WATT units are only capable of 150 watt per line maximum 300 watt total , we consumers cannot read specifications or maybe i just passed thru life gaizing at the stars
well i have two XPLUS 625W sentey working more than 60 days perfect with S1 on overlock, maybe it has to do with PCIE 6+2 PIN CONECTORS THEY COME WITH 2 CONECTORS ON EACH LINE , IN OTHER WORDS FOR CONECTORS TOTAL? 
Hello , wonder if anybody can help me , i have a 750 watt sentey extreme rock power ps , and when i connect to s1 antminer it falls out once machine starts hashing, i have three of these PS none work , yet i connect and old xplus 625 ps also sentey to the antminer and it works perfect, ?
Buy a gold or platinum seasonic power supply instead.
Say's it's a single rail with 600 watts available:
http://www.sentey.com/en/erp-750-watts
Must be POS PSU Or it may need a fan or something on one of the other 4 pin connectors or 5 volt/3 volt lines to work
http://www.sentey.com/en/erp-750-watts
Must be POS PSU
Or it may need a fan or something on one of the other 4 pin connectors or 5 volt/3 volt lines to work 
Well, you bought a garbage PSU. What did you expect?
Sorry for the flippant reply... but seriously, Sentey?!
Sorry for the flippant reply... but seriously, Sentey?!
Hello , wonder if anybody can help me , i have a 750 watt sentey extreme rock power ps , and when i connect to s1 antminer it falls out once machine starts hashing, i have three of these PS none work , yet i connect and old xplus 625 ps also sentey to the antminer and it works perfect, ?
Jump to: