still trying to figure this out. Has anyone else tried to adjust "Power Control" in linux? in windows, you can set it through CCC.
Topic: setting power settings in linux for 6970 (Read 1330 times)
Setting is called "Power Control".
It is not really the voltage. Seems like a power boost.
It is not really the voltage. Seems like a power boost.
Sounds like an extra overclock + voltage adjust on top. Sorry, but you'll probably have to flash your card.
It's the maximum power (Watt) your card can drain. Let me know if you have any luck with voltage settings on the 6970.
Setting is called "Power Control".
It is not really the voltage. Seems like a power boost.
It is not really the voltage. Seems like a power boost.
in windows 7 I am able to adjust my 6970 to:
cpu: 950
mem: 650
power setting: +5%
results into 406mh/s
trying to switch to linux (ubuntu version that is on this board) and was able to adjust CPU using:
aticonfig --odsc 950,1375 --adapter=0
However can't get the MH higher than 340mh. My guess is the power setting of 5% increase is missing.
Does anyone know how to set this setting in linux?
Thannks in advance.
cpu: 950
mem: 650
power setting: +5%
results into 406mh/s
trying to switch to linux (ubuntu version that is on this board) and was able to adjust CPU using:
aticonfig --odsc 950,1375 --adapter=0
However can't get the MH higher than 340mh. My guess is the power setting of 5% increase is missing.
Does anyone know how to set this setting in linux?
Thannks in advance.
Jump to: