Setting up CGMiner with an Nvidia and AMD GPU installed, specifically GPU map

AlienBoy

newbie

Activity: 5

Merit: 0

Quote from: skeeterskeeter on November 02, 2013, 03:59:59 PM

And how can I see the temperature of the card?

I encountered the same problem, I'm running on Win7 and have two displays connected to NVIDIA card and no display to AMD. Seems that Win7 assumes there is no need to have signal output through AMD card and somehow causes the AMD APP not returning info of fan speed/temp.

Here's my workaround:

Go to Control Panel -> Display -> Screen Resolution
Hit "Detect" button -> you will see a ghost display showed up (not connected)
Click on the ghost display -> under "Multiple displays" drop down, select "Try to connect anyway on : VGA" -> apply settings
Again, under "Multiple displays" drop down, select Extend these displays -> apply settings
Now you have a hidden desktop on the ghost display
Run cgminer normally, you should get your stats readings

Hope that helps!

BrewCrewFan

hero member

Activity: 672

Merit: 501

you can single out the device via the -d flag in your .bat file

So it would be something like:

F:\cgminer.exe --scrypt -o URL -u USER -p PASS -I 13 -w 256 --thread-concurrency 22400 -g 1 --auto-fan --auto-gpu --temp-target 79 -d 1

you need to figure out which device # your ATI card is... i almost bet its going to be -d 1 ...if not then try -d 0

eddilicious

full member

Activity: 196

Merit: 100

I am also having this issue. using a NVidia for display, the temperature is gone, tried all catalyst and SDK versions, no solution. Before reading this thread, I was thinking of flashing bios or mother board compatibility issues.

Trance

hero member

Activity: 551

Merit: 500

I'm also having the same issue

skeeterskeeter

full member

Activity: 160

Merit: 100

I am trying to setup my GPU's so that I can have a crappy little Nvidia 610GT do my video output while my 7950 does some mining.
I think that I need to do is use the gpu-map argument of CGMiner but I am not sure how to use it.

Here is my original list of arguments for just my 7950

Code:

F:\cgminer.exe --scrypt -o URL -u USER -p PASS -I 13 -w 256 --thread-concurrency 22400 -g 1 --auto-fan --auto-gpu --temp-target 79

This is the output produced running the -n switch

Here is the README section for --gpu-map

Quote

--gpu-map
Map OpenCL to ADL device order manually, paired CSV (e.g. 1:0,2:1 maps OpenCL 1 to ADL 0, 2 to 1)

I'm not sure what exactly this means.
I also see the -device option, could I possibly ignore the 610GT in CGMiner?

EDIT:

If I run with my original arguments and the

Code:

-gpu-platform 1

argument I can start mining on my 7950 but I cannot get the temprature and fan speed to show up. Which is still a result of the hardware monitoring issue/gpu-map issue. I also cannot view the temperature in GPU-Z either.

Does this mean that --auto-gpu and --auto-fan are not working while I am mining and the fan is just set to full blast?
And how can I see the temperature of the card?

Topic: Setting up CGMiner with an Nvidia and AMD GPU installed, specifically GPU map (Read 19218 times)