Author

Topic: Should each of my mining machines have UPS? (Uninterrupted Power Supply) (Read 401 times)

hero member
Activity: 756
Merit: 560
A UPS is only for saving what you have on the OS so you can shut down cleanly. In a mining situation there is no need as it does not protect the hardware in any specific way. If you have unstable power just make sure your PSU is set to NOT turn back on after power loss in BIOS as rapidly powering up and down a bunch will hurt things, otherwise you will be fine.
member
Activity: 113
Merit: 10
Hello,

I want to protect my investments, and I am looking at Minuteman Power Tech.
Any recommendations for machines at 800w machine? 1300W machine?

Anyone one own any of these machines?

META

I have 2 APC 2200 models that provide power for 2 S7s.   I tried splitting a 3rd S7 (e.g., power supply A for control board and hashing board #1 plugged into UPS A and power supply B for the remaining 2 hashing boards plugged into UPS B) but they were overloaded.  As it is, one S7 uses 68% of their capacity.

I would not recommend UPSes since they are expensive when you're talking 1400 WATTS (not VA) and the "return" is possibly longer Miner life (since it's fed better power?) or 5 minutes of "uptime" during a power outage.  Not worth it.

legendary
Activity: 1722
Merit: 1000
Hello,

I want to protect my investments, and I am looking at Minuteman Power Tech.
Any recommendations for machines at 800w machine? 1300W machine?

Anyone one own any of these machines?

META

I don't own them but UPS is well recommended if you are mining in an area where electricity goes off regularly.

If electricity is stable in your area then UPS may be costly and overkill.
newbie
Activity: 2
Merit: 0
Hello,

I want to protect my investments, and I am looking at Minuteman Power Tech.
Any recommendations for machines at 800w machine? 1300W machine?

Anyone one own any of these machines?

META
Jump to: