Show Extra Antminer S9 Controls Using Only CSS

tim-bc

full member

Activity: 538

Merit: 175

Quote from: grinbuck on September 27, 2018, 02:51:27 AM

Just curious - What does "Beeper Ringing" do?

Older models such as the S7 and earlier had a beeper/buzzer that would sound when there was a fatal error. You could disable the beeper using that menu option.

It is irrelevant with the S9 since it has no buzzer. On the S9, fatal errors are only shown by the red blinking light.

BitMaxz

legendary

Activity: 3206

Merit: 2904

Block halving is coming.

I think you don't need to download the stylus chrome extension to reveal the hidden features you can do it manually by following this guide https://bitcointalksearch.org/topic/solution-for-antminer-s9-fans-speed-up-down-every-20-seconds-2690140

Quote from: m3hm3t on September 27, 2018, 01:50:13 AM

But all matter is the control of the voltage! so where is it?

There's no voltage control if you do this method I think you can try to check this thread https://bitcointalksearch.org/topic/how-to-overclock-your-s9t9t9r4-to-18ths-free-4425212 and edit the set_miner_conf.cgi find the line with voltage then you can edit the value whatever you like.

Quote from: grinbuck on September 27, 2018, 02:51:27 AM

Just curious - What does "Beeper Ringing" do?

According to some article about antminer s7 it's a beep sound so if you uncheck the "beeper ringing" it might remove the beep sound of the miner.

grinbuck

member

Activity: 68

Merit: 18

Just curious - What does "Beeper Ringing" do?

m3hm3t

member

Activity: 133

Merit: 15

~ Fortuna Favet Fortibus ~

But all matter is the control of the voltage! so where is it?

BTCetera

member

Activity: 81

Merit: 10

Install the Stylus Chrome Extension then add this UserStyle to the extension. You will then reveal these hidden settings in /cgi-bin/minerConfiguration.cgi, such as

Topic: Show Extra Antminer S9 Controls Using Only CSS (Read 391 times)