thanks for the replies, I should have known to manually set diff. SIGT is going to the moon!
Posted From bitcointalk.org Android App
Topic: Signatum cpuminer not getting any hits... (Read 670 times)
It's the stratum difficulty. Some pools use vardiff and will adjust the diff automatically, some pools have
special low diff ports, and others allow the diff to be set in the password string. RTFM.
special low diff ports, and others allow the diff to be set in the password string. RTFM.
Maybe the diff is increased. When the diff was low (for example 1), you had to mine 100 "share" at 0.1 diff, than you can see a share in the pool.
Now that the diff is increased (1->100 for example) have to do more complex work, so it use more time to resolve the work.
You can try mine at lower share. If you get 4 share every 60sec you are in the right way
Now that the diff is increased (1->100 for example) have to do more complex work, so it use more time to resolve the work.
You can try mine at lower share. If you get 4 share every 60sec you are in the right way
Nobody???
So I have been mining Signatum with my 1080ti getting 50mh/s at suprnova. I have also been running cpuminer on a couple other computers. Last week the cpuminer was getting accepted shares constantly like clockwork. This week they just run and run, maybe get one share in ten minutes. Is this a problem on my end or is this due to an increase in difficulty? Are others experiencing this as well???
Jump to: